Two-Dimensional Conjugated Metal-Organic Frameworks with Large Pore Apertures and High Surface Areas for NO2 Selective Chemiresistive Sensing

The emergence of two-dimensional conjugated metal–organic frameworks (2D c-MOFs) with pronounced electrical properties (e.g., high conductivity) has provided a novel platform for efficient energy storage, sensing, and electrocatalysis. Nevertheless, the limited availability of suitable ligands restricts the number of available types of 2D c-MOFs, especially those with large pore apertures and high surface areas are rare. Herein, we develop two new 2D c-MOFs (HIOTP-M, M=Ni, Cu) employing a large p-π conjugated ligand of hexaamino-triphenyleno[2,3-b:6,7-b′:10,11-b′′]tris[1,4]benzodioxin (HAOTP). Among the reported 2D c-MOFs, HIOTP-Ni exhibits the largest pore size of 3.3 nm and one of the highest surface areas (up to 1300 m² g⁻¹). As an exemplary application, HIOTP-Ni has been used as a chemiresistive sensing material and displays high selective response (405 %) and a rapid response (1.69 min) towards 10 ppm NO₂ gas. This work demonstrates significant correlation linking the pore aperture of 2D c-MOFs to their sensing performance.     

Ionothermal Synthesis of Metal-Organic Frameworks Using Low-Melting Metal Salt Precursors**

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes with myriad potential applications in chemical separations, catalysis, and drug delivery. A major barrier to the application of MOFs is their poor scalability, as most frameworks are prepared under highly dilute solvothermal conditions using toxic organic solvents. Herein, we demonstrate that combining a range of linkers with low-melting metal halide (hydrate) salts leads directly to high-quality MOFs without added solvent. Frameworks prepared under these ionothermal conditions possess porosities comparable to those prepared under traditional solvothermal conditions. In addition, we report the ionothermal syntheses of two frameworks that cannot be prepared directly under solvothermal conditions. Overall, the user-friendly method reported herein should be broadly applicable to the discovery and synthesis of stable metal-organic materials.     

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO₂ into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal–organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO₂ thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO₂ conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO₂ reaction. The advantages of using noble-metal-free MOF catalysts for CO₂ conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO₂ conversion.     

Highly Robust Microporous Metal-Organic Frameworks for Efficient Ethylene Purification under Dry and Humid Conditions

Two C₂H₆-selective metal-organic framework (MOF) adsorbents with ultrahigh stability, high surface areas, and suitable pore size have been designed and synthesized for one-step separation of ethane/ethylene (C₂H₆/C₂H₄) under humid conditions to produce polymer-grade pure C₂H₄. Experimental results reveal that these two MOFs not only adsorb a high amount of C₂H₆ but also display good C₂H₆/C₂H₄ selectivity verified by fixed bed column breakthrough experiments. Most importantly, the good water stability and hydrophobic pore environments make these two MOFs capable of efficiently separating C₂H₆/C₂H₄ under humid conditions, exhibiting the benchmark performance among all reported adsorbents for separation of C₂H₆/C₂H₄ under humid conditions. Moreover, the affinity sites and their static adsorption energies were successfully revealed by single crystal data and computation studies. Adsorbents described in this work can be used to address major chemical industrial challenges.     

A Microporous Metal-Organic Framework with Unique Aromatic Pore Surfaces for High Performance C2H6/C2H4 Separation

Developing adsorptive separation processes based on C₂H₆-selective sorbents to replace energy-intensive cryogenic distillation is a promising alternative for C₂H₄ purification from C₂H₄/C₂H₆ mixtures, which however remains challenging. During our studies on two isostructural metal–organic frameworks ( Ni-MOF 1 and Ni-MOF 2 ), we found that Ni-MOF 2 exhibited significantly higher performance for C₂H₆/C₂H₄ separation than Ni-MOF-1 , as clearly established by gas sorption isotherms and breakthrough experiments. Density-Functional Theory (DFT) studies showed that the unblocked unique aromatic pore surfaces within Ni-MOF 2 induce more and stronger C−H⋅⋅⋅π with C₂H₆ over C₂H₄ while the suitable pore spaces enforce its high C₂H₆ uptake capacity, featuring Ni-MOF 2 as one of the best porous materials for this very important gas separation. It generates 12 L kg⁻¹ of polymer-grade C₂H₄ product from equimolar C₂H₆/C₂H₄ mixtures at ambient conditions.     

Bioinspired Design of a Giant [Mn86] Nanocage-Based Metal-Organic Framework with Specific CO2 Binding Pockets for Highly Selective CO2 Separation

Adsorption-based removal of carbon dioxide (CO₂) from gas mixtures has demonstrated great potential for solving energy security and environmental sustainability challenges. However, due to similar physicochemical properties between CO₂ and other gases as well as the co-adsorption behavior, the selectivity of CO₂ is severely limited in currently reported CO₂-selective sorbents. To address the challenge, we create a bioinspired design strategy and report a robust, microporous metal–organic framework (MOF) with unprecedented [Mn₈₆] nanocages. Attributed to the existence of unique enzyme-like confined pockets, strong coordination interactions and dipole-dipole interactions are generated for CO₂ molecules, resulting in only CO₂ molecules fitting in the pocket while other gas molecules are prohibited. Thus, this MOF can selectively remove CO₂ from various gas mixtures and show record-high selectivities of CO₂/CH₄ and CO₂/N₂ mixtures. Highly efficient CO₂/C₂H₂, CO₂/CH₄, and CO₂/N₂ separations are achieved, as verified by experimental breakthrough tests. This work paves a new avenue for the fabrication of adsorbents with high CO₂ selectivity and provides important guidance for designing highly effective adsorbents for gas separation.     

Molecular Engineering of a Metal-Organic Polymer for Enhanced Electrochemical Nitrate-to-Ammonia Conversion and Zinc Nitrate Batteries

Metal–organic framework-based materials are promising single-site catalysts for electrocatalytic nitrate (NO₃⁻) reduction to value-added ammonia (NH₃) on account of well-defined structures and functional tunability but still lack a molecular-level understanding for designing the high-efficient catalysts. Here, we proposed a molecular engineering strategy to enhance electrochemical NO₃⁻-to-NH₃ conversion by introducing the carbonyl groups into 1,2,4,5-tetraaminobenzene (BTA) based metal-organic polymer to precisely modulate the electronic state of metal centers. Due to the electron-withdrawing properties of the carbonyl group, metal centers can be converted to an electron-deficient state, fascinating the NO₃⁻ adsorption and promoting continuous hydrogenation reactions to produce NH₃. Compared to CuBTA with a low NO₃⁻-to-NH₃ conversion efficiency of 85.1 %, quinone group functionalization endows the resulting copper tetraminobenzoquinone (CuTABQ) distinguished performance with a much higher NH₃ FE of 97.7 %. This molecular engineering strategy is also universal, as verified by the improved NO₃⁻-to-NH₃ conversion performance on different metal centers, including Co and Ni. Furthermore, the assembled rechargeable Zn−NO₃⁻ battery based on CuTABQ cathode can deliver a high power density of 12.3 mW cm⁻². This work provides advanced insights into the rational design of metal complex catalysts through the molecular-level regulation for NO₃⁻ electroreduction to value-added NH₃.     

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal–organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from −0.6 V to −1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.     

Metal-Organic Frameworks for Breakthrough Separation of 2-Butene Isomers with High Dynamic Selectivity and Capacity

Developing porous sorbents represents a potential energy-efficient way for industrial gas separation. However, a bottleneck for reducing the energy penalty is the trade-off between dynamic adsorption capacity and selectivity. Herein, we showed this problem can be overcome by modulating the kinetic and thermodynamic separation behaviours in metal–organic frameworks for sieving 2-butene geometric isomers, which are desired for upgrading the raffinates to higher value-added end products. We found that the iron-triazolate framework can realize the selective shape screening of 2-butene isomers assisted by electrostatic interactions at the pore apertures. Further introducing uncoordinated N binding sites by ligand substitution lowered the gas diffusion barrier and greatly boosted the dynamic separation performance. In breakthrough tests under ambient conditions, trans-2-C₄H₈ can be efficiently separated from cis-2-C₄H₈ with a record capacity of 2.10 mmol g⁻¹ with high dynamic selectivity of 2.39.     

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2O2 Production

Developing highly efficient catalytic sites for O₂ reduction to H₂O₂, while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H₂O₂ photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal–organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H₂O₂ production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O₄) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e⁻ O₂ reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H₂O₂ production activity and excellent stability under visible light irradiation.     

A Bismuth-Based Zeolitic Organic Framework with Coordination-Linked Metal Cages for Efficient Electrocatalytic CO2 Reduction to HCOOH

Zeolitic metal–organic frameworks (ZMOFs) have emerged as one of the most promsing catalysts for energy conversion, but they suffer from either weak bonding between metal-organic cubes (MOCs) that decrease their stability during catalysis processes or low activity due to inadequate active sites. In this work, through ligand-directing strategy, we successfully obtain an unprecedented bismuth-based ZMOF (Bi-ZMOF) featuring a ACO topological crystal structure with strong coordination bonding between the Bi-based cages. As a result, it enables efficient reduction of CO₂ to formic acid (HCOOH) with Faradaic efficiency as high as 91 %. A combination of in situ surface-enhanced infrared absorption spectroscopy and density functional theory calculation reveals that the Bi−N coordination contributes to facilitating charge transfer from N to Bi atoms, which stabilize the intermediate to boost the reduction efficiency of CO₂ to HCOOH. This finding highlights the importance of the coordination environment of metal active sites on electrocatalytic CO₂ reduction. We believe that this work will offer a new clue to rationally design zeolitic MOFs for catalytic reaction     

Catalyst Engineering for the Selective Reduction of CO2 to CH4: A First-Principles Study on X-MOF-74 (X=Mg,Mn, Fe,Co, Ni,Cu, Zn)

The conversion of carbon dioxide (CO₂) into more valuable chemical compounds represents a critical objective for addressing environmental challenges and advancing sustainable energy sources. The CO₂ reduction reaction (CO₂RR) holds promise for transforming CO₂ into versatile feedstock materials and fuels. Leveraging first-principles methodologies provides a robust approach to evaluate catalysts and steer experimental efforts. In this study, we examine the CO₂RR process using a diverse array of representative cluster models derived from X-MOF-74 (where X encompasses Mg, Mn, Fe, Co, Ni, Cu, or Zn) through first-principles methods. Notably, our investigation highlights the Fe-MOF-74 cluster's unique attributes, including favorable CO₂ binding and the lowest limiting potential of the studied clusters for converting CO₂ to methane (CH₄) at 0.32 eV. Our analysis identified critical factors driving the selective CO₂RR pathway, enabling the formation CH₄ on the Fe-MOF-74 cluster. These factors involve less favorable reduction of hydrogen to H₂ and strong binding affinities between the Fe open-metal site and reduction intermediates, effectively curtailing desorption processes of closed-shell intermediates such as formic acid (HCOOH), formaldehyde (CH₂O), and methanol (CH₃OH), to lead to selective CH₄ formation.     

Fluorescence Enhancement of a Metal-Organic Framework for Ultra-Efficient Detection of Trace Benzene Vapor

Indoor detection of volatile organic compounds (VOCs) concentration is necessary due to the serious toxicity hazards even at trace level. However, physisorbents usually exhibit weak interactions especially in the presence of trace concentrations of VOCs, thus exhibiting poor responsive signal. Herein, we report a new flexible metal–organic framework (MOF) that exhibits interesting pore-opening behavior after immersing in H₂O. The pore-opening phase shows significant (≈116 folds) and extremely fast (<1 minute) fluorescence enhancement after being exposed to saturated benzene vapor. The limit of detection concentration for benzene vapor can be calculated as 0.133 mg L⁻¹. Thus this material represents the first MOF to achieve visual detection of trace benzene vapor by the naked eyes. Theoretical calculations and single-crystal structure reveal that the special “bilateral π–π stacking” interactions between the host and guest, which facilitate electron transfer and greatly enhance the intensity of fluorescence.     

Structure Regulation of MOF Nanosheet Membrane for Accurate H2/CO2 Separation

High-purity H₂ production accompanied with a precise decarbonization opens an avenue to approach a carbon-neutral society. Metal–organic framework nanosheet membranes provide great opportunities for an accurate and fast H₂/CO₂ separation, CO₂ leakage through the membrane interlayer galleries decided the ultimate separation accuracy. Here we introduce low dose amino side groups into the Zn₂(benzimidazolate)₄ conformation. Physisorbed CO₂ served as interlayer linkers, gently regulated and stabilized the interlayer spacing. These evoked a synergistic effect of CO₂ adsorption-assisted molecular sieving and steric hinderance, whilst exquisitely preserving apertures for high-speed H₂ transport. The optimized amino membranes set a new record for ultrathin nanosheet membranes in H₂/CO₂ separation (mixture separation factor: 1158, H₂ permeance: 1417 gas permeation unit). This strategy provides an effective way to customize ultrathin nanosheet membranes with desirable molecular sieving ability.     

Sculpting In-plane Fractal Porous Patterns in Two-Dimensional MOF Nanocrystals for Photoelectrocatalytic CO2 Reduction

Herein, by choosing few-nm-thin two-dimensional (2D) nanocrystals of MOF-5 containing in-planner square lattices as a modular platform, a crystal lattice-guided wet-chemical etching has been rationally accomplished. As a result, two attractive pore patterns carrying Euclidean curvatures; precisely, plus(+)-shaped and fractal-patterned pores via ⟨100⟩ and ⟨110⟩ directional etching, respectively, are regulated in contrast to habitually formed spherical-shaped random etches on MOF surface. In agreement with the theoretical calculations, a diffusion-limited etching process has been optimized to devise high-yield of size-tunable fractal-pores on the MOF surface that tenders for a compatibly high payload of catalytic Re^I-complexes using the existing large edge area once modified into a free amine-group-exposed inner pore surface. Finally, on benefiting from the long-range fractal opening in 2D MOF support structure, while loaded on an electrode surface, a facilitated cross-interface charge-transportation and well-exposure of immobilized Re^I-catalysts are anticipated, thus realizing enhanced activity and stability of the supported catalyst in photoelectrochemical CO₂-to-CO reduction.     

Controlled Partial Linker Thermolysis in Metal-Organic Framework UiO-66-NH2 to Give a Single-Site Copper Photocatalyst for the Functionalization of Terminal Alkynes

Metal–organic frameworks (MOFs) with expanding porosity and tailored pore environments are intriguing for catalytic applications. We report herein a straightforward method of controlled partial linker thermolysis to introduce desirable mesopores into mono-ligand MOFs, which is different from the classical thermolyzing method that starts from mixed-linker MOFs. UiO-66-NH₂, after partial ligand thermolysis, exhibits significant mesoporosity, retained crystal structure, improved charge photogeneration and abundant anchoring sites, which is ideal to explore single-site photocatalysis. Atomically dispersed Cu is then accommodated in the tailored pore. The resulting single-site Cu catalyst exhibits excellent performance for photocatalytic alkylation and oxidation coupling for the functionalization of terminal alkynes. The study highlights the advantage of controlled partial linker thermolysis to synthesize hierarchical MOFs to achieve the advanced single-site photocatalysis.     

Graphdiyne:a Highly Sensitive Material for ppb-Level NO2 Gas Sensing at Room Temperature

Detection of a trace amount of NO2 at room temperature has very important applications in air quality monitoring,protection of human health and medical diagnose.However,the existing NO2 sensors often suffer from low sensitivity when the concentration at the ppb-level.Here,we report a new kind of materials based on graphdiyne(GDY)for highly sensitive detection of ppb-level(ppb:part per billion)NO2 at room temperature.After thermal treatment of the as-prepared GDY at 600℃under argon atmosphere for 2 h(the obtained sample denoted as GDY-600),the prepared sensor with GDY-600 displays excellent sensitivity with a response value of 6.2％towards 250 ppb NO2 at room temperature,which is better than most of reported sensing materials.In addition,the sensor exhibits significantly high selectivity to NO2 against typical interfering gases including CO,CO2,NH3,H2,H2S and toluene.Moreover,the sensor shows remarkable stability after repetitive measurements.The superior sensing performance of GDY-600 can be ascribed to the highly π-conjugated structure with special acetylenic bonds and abundant oxygen-containing functional groups,which are all beneficial for the gas adsorption and redox reaction on the surface.     

Photocatalytic Oxidation of NO2 on TiO2: Evidence of a New Source of N2O5

N₂O₅ is an important intermediate in the atmospheric nitrogen cycle. Using a flow tube reactor, N₂O₅ was found to be released from the TiO₂ surface during the photocatalytic oxidation of NO₂, revealing a previously unreported source of N₂O₅. The rate of N₂O₅ release from TiO₂ was dependent on the initial NO₂ concentration, relative humidity, O₂/N₂ ratio, and irradiation intensity. Experimental evidence and quantum chemical calculations showed that NO₂ can react with the surface hydroxyl groups and the generated electron holes on the TiO₂, followed by combining with another NO₂ molecule to form N₂O₅. The latter was physisorbed on TiO₂ and had a low adsorption energy of −0.13 eV. Box model simulations indicated that the new source of N₂O₅ released from TiO₂ can increase the daytime N₂O₅ concentration by up to 20 % in urban areas if abundant TiO₂-containing materials and high NOx concentrations were present. This joint experimental/theoretical study not only demonstrates a new chemical mechanism for N₂O₅ formation but also has important implications for air quality in urban areas.     

Boosting Electroreduction of CO2 over Cationic Covalent Organic Frameworks: Hydrogen Bonding Effects of Halogen Ions

We present the first example of charged imidazolium functionalized porphyrin-based covalent organic framework (Co-iBFBim-COF-X) for electrocatalytic CO₂ reduction reaction, where the free anions (e.g., F⁻, Cl⁻, Br⁻, and I⁻) of imidazolium ions nearby the active Co sites can stabilize the key intermediate *COOH and inhibit hydrogen evolution reaction. Thus, Co-iBFBim-COF-X exhibits higher activity than the neutral Co-BFBim-COF, following the trend of F⁻<Cl⁻<Br⁻<I⁻. Particularly, the Co-iBFBim-COF-I⁻ showed nearly 100 % CO₂ selectivity at a low full-cell voltage of 2.3 V, and achieved a high CO₂ partial current density of 52 mA cm⁻² with a turnover frequency of 3018 h⁻¹ at 2.4 V in the anion membrane electrode assembly, which is 3.57 times larger than that of neutral Co-BFBim-COF. This work provides new insight into the importance of free anions in the stabilization of intermediates and decreasing the local binding energy of H₂O with active moiety to enhance CO₂ reduction reaction.     

Facile Synthesis of Ultra‐wide Two Dimensional Bi2S3 Nanosheets: Characterizations,Properties and Applications in Hydrogen Peroxide Sensing and Hydrogen Storage

The ultra‐wide two dimensional Bi₂S₃ nanosheets (2D Bi₂S₃ Ns) as non‐toxic graphene‐like nanomaterials have been prepared through solvothermal decomposition of a single‐source precursor, Bi(S₂CNEt₂)₃, in ethylenediamine media for 2 h in 180 °C. The morphology, structure, properties and catalytic activity of prepared 2D Bi₂S₃ Ns were characterized with XRD, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV‐Visible spectroscopy, cyclic voltammetry (CV), amperometry, electrochemical charge/discharge technique and electrochemical impedance spectroscopy (EIS). The SEM image showed the 2D Bi₂S₃ Ns with a thickness of 15±4 nm and lengths of several micrometers is synthesized. The UV−Vis spectrum of 2D Bi₂S₃ Ns showed high sensitivity to visible‐near infrared light with its direct energy band gap of ≈1.22 eV. These Bi₂S₃ Ns showed high electron transfer ability and good electrochemical behavior and also exhibited electro‐catalytic activity toward the reduction‐oxidation of hydrogen peroxide. It is found that Bi₂S₃ Ns could detect H₂O₂ at wide linear concentration range (50.0 μM–8.0 mM) with detection limit 8 μM, using amperometry as measuring technique. Also the synthesized Bi₂S₃ Ns exhibited excellent electrochemical H₂ storage properties. As a result, based on above properties, the Bi₂S₃ Ns can be used as a valuable and useful nanomaterial for H₂ storage, high‐energy batteries, electrocatalytic fields and electrochemical sensing.