Determination of the iodine value and the free fatty acid content of waste animal fat blends using FT-NIR

This study determined iodine value (IV) and free fatty acids (FFA) content of four different animal fat wastes and their blends using Fourier transform near-infrared spectroscopy (FT-NIR). Chemometric analysis by partial least squares (PLS) regression was used to correlate spectral data with IV and FFA reference values of the samples. The effects of four spectra pre-processing (first derivative (FD), second derivative (SD), multiplicative scatter correction (MSC) and vector normalization (VN)) methods were investigated to predict the reproducibility and robustness of the PLS-NIR model developed. A set of 70% of animal fat wastes and their blends were used for developing PLS calibration models for measuring IV and FFA content using the remaining 30% samples as an independent test set validation. The coefficient of determination (R²), the root mean square error estimation (RMSEE), and the residual prediction deviation (RPD) were used as indicators for the predictability of the PLS models. PLS-NIR models developed using first derivative and second derivative spectral preprocessing methods were the best for both IV and FFA content analysis (For IV, FD; R² = 0.9870, RMSEE = 1.40 gI₂/100 g, RPD = 8.76, SD; R² = 0.9892, RMSEE = 1.28 gI₂/100 g, RPD = 9.64 while For FFA, FD; R² = 0.9991, RMSEE = 0.195%, RPD = 34.00, SD; R² = 0.9993, RMSEE = 0.182%, RPD = 36.8). Overall, the results of this study demonstrate the suitability of FT-NIR spectroscopy for the quality control analysis of feedstocks for biodiesel production.     

Characterization and quantification of secondary metabolite profiles in leaves of red and white clover species by NIR and ATR-IR spectroscopy

Different varieties of two clover species (Trifolium pratense L. and Trifolium repens L.), cultivated in 2008 and 2009 were analysed by near-infrared (NIR) and mid-infrared (MIR) spectroscopy for establishing a fast and reliable quantification protocol for isoflavones and phenolic acids. Based on HPLC–UV/MS reference data, good results were obtained by PLS regression for the prediction of total isoflavone (R² = 0.90) as well as for glycitin content (R² = 0.88). Because of the lower concentration of formononetin and phenolic acids, their prediction quality was generally slightly lower (R² = 0.73 and R² = 0.64, respectively) compared to those of the isoflavones. The applicability of ‘leave one out’ cross validation for such a large data set is proven by comparison to an averaged randomized test-set validation leading to similar results. Additionally, the large sample set (n = 624) was screened by hierarchical cluster analysis allowing a fast evaluation of influences resulting from different cultivation parameters on the isoflavone and phenolic acid content. Climatic changes (cultivation year, date of harvest) seem to have the most impact on the metabolic profile as indicated by higher variability in the referring spectra when both cultivation years were simultaneously regarded. This work offers a new vibrational spectroscopic approach for the qualitative and quantitative determination of isoflavone and phenolic acid profiles, directly performed in the plant material without any laborious sample preparation and time-consuming chromatography. Once validated by HPLC reference, MIR and NIR spectroscopy can be used for the reliable prediction of secondary metabolites in clover as well as for fast screening and pre-evaluation of the diversity of a large sample set, aiming to reduce analytical costs, chemical waste and expenditure of time.     

A novel design of a temperature-controlled FT-ICR cell for low-temperature black-body infrared radiative dissociation (BIRD) studies of hydrated ions

A novel design for a temperature-controlled ICR cell is described for use in black-body infrared radiative dissociation (BIRD) studies of weakly bound systems like water clusters. Due to several improved design features, it provides a very uniform black-body radiation environment, and at the same time maintains efficient pumping for a low collision rate on the order of 10^?2 s^?1. At the lowest temperatures reached, nominally 89 K cell plate temperature, water evaporation effectively ceases, while intracluster reactions in V⁺(H₂O)_n with a small activation energy are still observed. BIRD rate constants for Ag⁺(H₂O)_n, n = 4–6, are shown in the temperature range T = 160–320 K. For n = 6, a linear Arrhenius plot with R² = 0.9943 is obtained without any calibration, confirming the suitability of the cell for quantitative BIRD studies.     

Determination of soil properties using Fourier transform mid-infrared photoacoustic spectroscopy

Photoacoustic spectroscopy (PAS) is based on the absorption of electromagnetic radiation by analyte molecules, and this technique has emerged as a valuable tool for the study of materials like biological, chemical and geological samples. In this paper, Fourier transform mid-infrared photoacoustic spectroscopy (FTIR-PAS) was used in the prediction of soil properties. Air-dried soil samples (n = 56) from Fengqiu Ecology Experimental Station Chinese Academy of Sciences were involved in this experiment, and FTIR-PAS spectra of these soil samples were recorded. These FTIR-PAS spectra indicated abundant soil information, but overlapping of absorption made it difficult to make direct measurement of soil properties. Partial least squares (PLS) models based on soil FTIR-PAS spectra was developed to predict available nitrogen (N), phosphorus (P), potassium (K) and organic matter content of soil. 42 soil samples were firstly used in leave-one-out cross-validation, and calibration error, calibration coefficient, validation error and ratio of standard deviation to prediction error (RPD) were obtained to optimize the PLS factor number; then based on the optimized PLS models the soil properties of the other 14 soil samples were predicted. The calibration statistics showed that the PLS model was suitable to use in the prediction of available N, P, K and organic matter content of soil. This prediction technique was non-destructive, and no sample pre-treatment was needed, which made FTIR-PAS a very promising method for fast evaluation of soil properties as well as soil quality.     

Application of Box–Behnken design in the optimisation of an on-line pre-concentration system using knotted reactor for cadmium determination by flame atomic absorption spectrometry

The present paper proposes an on-line pre-concentration system for cadmium determination in drinking water using flame atomic absorption spectrometry (FAAS). Cadmium(II) ions are retained as 1-(2-pyridylazo)-2-naphthol (PAN) complex at the walls of a knotted reactor, followed of elution using hydrochloric acid solution. The optimization was performed in two steps using factorial design for preliminary evaluation and a Box–Behnken design for determination of the critical experimental conditions. The variables involved were: sampling flow-rate, reagent concentration, pH and buffer concentration, and as response the analytical signal (absorbance). The validation process was performed considering the parameters: linearity and other characteristics of the calibration curve, analytical features of on-line pre-concentration system, precision, effect of other ions in the pre-concentration system and accuracy. Using the optimized experimental conditions, the procedure allows cadmium determination with a detection limit (3 σ / S) of 0.10 μg L^− 1, a quantification limit (10 σ / S) of 0.33 μg L⁻¹, and a precision, calculated as relative standard deviation (RSD) of 2.7% (n = 7) and 2.4% (n = 7) for cadmium concentrations of 5 and 25 μg L^− 1, respectively. A pre-concentration factor of 18 and a sampling frequency of 48 h⁻¹ were obtained. The recovery for cadmium in the presence of several ions demonstrated that this procedure could be applied for the analysis of water samples. The method was applied for cadmium determination in drinking water samples collected in Salvador City, Brazil. The cadmium concentrations found in five samples were lower than the maximum permissible levels established by the World Health Organization.     

A quality control method for geranium oil based on vibrational spectroscopy and chemometric data analysis

Rose-scented geranium, a commercially important cultivar originating from Pelargonium graveolens L’Her. ex Ait., is a high value essential oil extensively used in flavour and fragrance formulations. The oil is variable in composition with ‘Bourbon geranium’ (from Reunion Island) regarded as the highest quality geranium oil. Quality assessment of geranium oil involves profiling seven major volatile constituents (geraniol, citronellol, geranyl formate, citronellyl formate, linalool, isomenthone and guaia-6,9-diene) using gas chromatography (GC). The aim of this study was to explore the feasibility of vibrational spectroscopy in tandem with chemometric methods as a rapid and low-cost alternative quality control method. Geranium oil samples (n = 70) were obtained from different suppliers representing cultivation sites in South Africa, Egypt, India, Reunion Island, China and Madagascar. Reference analysis was performed using gas chromatography coupled to mass spectrometry (GC–MS). The mid-infrared (MIR) and near-infrared (NIR) spectra of the oils were recorded with a total of 32 scans accumulated for each sample. Partial least squares (PLS) multivariate calibration models were developed. The calibration models obtained for both MIR and NIR data produced good correlation coefficients (R² > 0.90) between the predicted and reference values for all seven marker molecules. Generally, the error parameters (RMSEE and RMSEP) after external validation were low (<1.0%) for all compounds guaranteeing reliable predictions. The results show convincingly the potential of both MIRS and NIRS as alternative methods that can be used in quality assessment of geranium oil providing sufficiently accurate results.     

Reactivity of intramolecularly coordinated aluminum compounds to R3EOH (E = Sn,Si). Remarkable migration of N,C,N and O,C,O pincer ligands

The reaction of organoaluminum compounds containing O,C,O or N,C,N chelating (so called pincer) ligands [2,6-(YCH₂)₂C₆H₃]AlⁱBu₂ (Y = MeO 1, ^tBuO 2, Me₂N 3) with R₃SnOH (R = Ph or Me) gives tetraorganotin complexes [2,6-(YCH₂)₂C₆H₃]SnR₃ (Y = MeO, R = Ph 4, Y = MeO, R = Me 5; Y = ^tBuO, R = Ph 6, Y = ^tBuO, R = Me 7; Y = Me₂N, R = Ph 8, Y = Me₂N, R = Me 9) as the result of migration of O,C,O or N,C,N pincer ligands from aluminum to tin atom. Reaction of 1 and 2 with (ⁿBu₃Sn)₂O proceeded in similar fashion resulting in 10 and 11 ([2,6-(YCH₂)₂C₆H₃]SnⁿBu₃, Y = MeO 10; Y = ^tBuO 11) in mixture with ⁿBu₃SnⁱBu. The reaction 1 and 3 with 2 equiv. of Ph₃SiOH followed another reaction path and ([2,6-(YCH₂)₂C₆H₃]Al(OSiPh₃)₂, Y = MeO 12, Me₂N 13) were observed as the products of alkane elimination. The organotin derivatives 4–11 were characterized by the help of elemental analysis, ESI-MS technique, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and in the case 6 and 8 by single crystal X-ray diffraction (XRD). Compounds 12 and 13 were identified using elemental analysis,¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

DFT study of group 8 catalysts for the hydrophenylation of ethylene: Influence of ancillary ligands and metal identity

Computational methods are used to investigate catalytic hydrophenylation of ethylene using complexes of the type [(Y)M(L)(CH₃)(NCMe)]ⁿ⁺ [Y = Mp, n = 1; Y = Tp, n = 0; M = Ru or Os; L = PMe₃, PF₃, or CO; Mp = tris(pyrazolyl)methane; Tp = hydrido-tris(pyrazolyl)borate]. The conversion of ethylene and benzene to ethylbenzene with [(Y)M(L)(Ph)]ⁿ⁺ as catalyst involves four steps: (1) ethylene coordination, (2) ethylene insertion into the M–Ph bond, (3) benzene coordination, and (4) benzene C–H activation. DFT calculations form the basis to compare stoichiometric benzene C–H activation by [(Y)M(L)(CH₃)(NCMe)]ⁿ⁺ complexes to yield methane and [(Y)M(L)(Ph)(NCMe)]ⁿ⁺. In addition, starting from the 16-electron species [(Y)M(L)(Ph)]ⁿ⁺, potential energy surfaces for the formation of ethylbenzene are calculated to reveal the impact of modifications to the scorpionate ligand (Mp or Tp), co-ligand (L) and metal center (M).     

Synthesis and asymmetric catalytic application of chiral imidazolium–phosphines derived from (1R,2R)-trans-diaminocyclohexane

Reaction between a chiral imidazole–amine precursor derived from (1R,2R)-trans-diaminocyclohexane and P¹Cl (where P¹ = PPh₂, P(1,3,5-Me₃C₆H₃)₂, P(2,2′-O,O′-(1,1′-biphenyl), P((R)-(2,2′-O,O′-(1,1′-binaphthyl))) and P((S)-(2,2′-O,O′-(1,1′-binaphthyl)))) followed by RX (where R = ⁿPr, ⁱPr, CHPh₂, X = Br; R = ⁱPr, X = I), respectively, gives a selection of chiral imidazolium–phosphine compounds. Deprotonation of the imidazolium salt gives the corresponding NHC–P ligands that can be used in metal-mediated asymmetric catalytic applications. Catalytic reactions show that NHC–P ligands give a significantly greater rate of reaction for a palladium catalysed allylic substitution reaction in comparison to analogous di-NHC or NHC–imine ligands and that NHC–P hybrids are also effective for iridium catalysed transfer hydrogenation.     

Copper film electrode for anodic stripping voltammetric determination of trace mercury and lead

A novel in-situ prepared copper film electrode (CuFE) for anodic stripping voltammetric measurement of trace levels of Hg(II) and Pb(II) is presented. The optimal electroanalytical performance of the CuFE was achieved in electrolyte solution comprising 0.1 M HCl and 0.4 M NaCl. The CuFE exhibited excellent operation in the presence of dissolved oxygen with calculated LoD of 0.1 μg L^− 1 Hg(II) and 0.06 μg L^− 1 Pb(II) in combination with 300 s accumulation time, repeatability with RSD of 4.5% for Hg(II) and 0.9% for Pb(II) (n = 12), and favourable linear response in the examined concentration range of 10–100 μg L^− 1 (R² = 0.997) for Hg and 5–70 μg L^− 1 (R² = 0.999) for Pb after 120 s accumulation. The electrode enabled also simultaneous detection of both investigated metal ions and revealed promising electroanalytical characteristics similar to or in certain cases surpassing those of commonly used gold electrodes.     

Synthesis and characterization of novel intramolecularly O,C,O-coordinated heteroleptic organostannylenes and their tungstenpentacarbonyl complexes

The syntheses are reported of the novel heteroleptic organostannylenes [2,6-(ROCH₂)₂C₆H₃]SnCl (1, R = Me; 2, R = t-Bu) and of their tungstenpentacarbonyl complexes [2,6-(ROCH₂)₂C₆H₃](X)SnW(CO)₅ (3, X = Cl, R = Me; 4, X = Cl, R = t-Bu; 5, X = H, R = Me). The compounds were characterized by means of elemental analyses, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopies, electrospray mass spectrometry and in case of 3 and 4 also by single crystal X-ray diffraction analysis. For the two latter compounds the substituents bound at the ether oxygen atom control the strength of intramolecular O → Sn coordination. Thus, the O–Sn distances amount to 2.391(5)/2.389(5) (3) and 2.464(3)/2.513(3) Å (4).     

In-line Raman spectroscopy and advanced process control for the extraction of anethole and fenchone from fennel (Foeniculum vulgare L. MILL.)

Plants are a desirable source for molecules of all kinds and for every purpose. Besides traditional techniques for extraction, plants are challenging for modern process engineering due to great variations because of their natural origin. One way to ensure high quality and low costs, as well as highly resource-efficient extraction, is in-line monitoring and process control. This study demonstrates the use of in-line Raman spectroscopy for monitoring the extraction of anethole and fenchone from fennel seed as a typical example. A partial least square calibration model with high accuracy was created. (Anethole: R² = 0.99, root mean square error of calibration (RMSEC) = 0.01256 g/L, root mean square error of validation (RMSEV) = 0.02608 g/L, and calibration range up to 2 g/L. Fenchone: R² = 0.98, RMSEC = 0.01188 g/L, RMSEV = 0.01945 g/L, and calibration up to 0.75 g/L.) These data are directly linked to a physicochemical process model to control the extraction process in real time and to perform predictive simulations while processing. The added value of this approach for modern phytoextraction is highlighted and exemplified as a major step toward sustainable Green Extraction processes.     

Graphite furnace atomic absorption spectrometric determination of Ni and Pb in diesel and gasoline samples stabilized as microemulsion using conventional and permanent modifiers

A procedure for the graphite furnace atomic absorption spectrometric determination of Ni and Pb in diesel and gasoline samples was developed. Sample stabilization was necessary because of evident analyte losses that occurred immediately after sampling. Excellent long-term sample stabilization was observed by mixing different organic solvents with propan-1-ol and 50% vol/vol HNO₃ at a 3.3:6.5:1 volume ratio. For Pb, efficient thermal stabilization was obtained using aqueous Pd–Mg modifier as well as for Ir as permanent modifier. The drying temperature and ramp rate influenced the sensitivity obtained for Ni, and had to be carefully optimized. Taking this into account, the same sensitivity was attained in all investigated organic media stabilized as microemulsion. Thus, calibration with microemulsions prepared with a single organic solvent was possible, using aqueous or organic stock solutions. Commercial gasoline and diesel samples were directly analyzed after stabilization as microemulsion and by comparative UOP procedures. n-Hexane microemulsions were used for calibration, and good agreement was obtained between the results using the proposed and comparative procedures. Typical coefficients of variation (n = 6) ranged from 1% to 4%, and from 1% to 3% for Ni and Pb, respectively. Detection limits (k = 3) in the original gasoline or diesel samples, derived from 10 blank measurements, were 4.5 and 3.6 μg l^− 1 for Ni and Pb, respectively, comfortably below the values found in the analyzed samples.     

Quantification of erythromycin in pharmaceutical formulation by transmission Fourier transform infrared spectroscopy

A simple, cost-effective and environmental friendly analytical method was developed for the quantification of erythromycin in tablet formulation using transmission Fourier Transform Infrared (FT-IR) spectroscopy for routine quality control analysis. There is no need of sample preparation except pellet formation for FT-IR analysis. Use of solvent was totally avoided in this method. Calibration was carried out by using simple Beer’s law in the FT-IR region between 1743 and 1697 cm⁻¹. The excellent coefficient of determination (R² = 0.998) was achieved with 0.0247 and 1.14 root mean square error of prediction (RMSEP) and root mean square error of cross validation (RMSECV), respectively. The results of the study revealed that the transmission FT-IR spectroscopy could be effectively used for rapid determination of active ingredients like erythromycin in pharmaceutical formulations to control the quality of finished products.     

Polyaniline-nylon-6 electrospun nanofibers for headspace adsorptive microextraction

A headspace adsorptive microextraction technique was developed using a novel polyaniline-nylon-6 (PANI-N6) nanofiber sheet, fabricated by electrospinning. The homogeneity and the porosity of the prepared PANI-N6 sheet were studied using the scanning electron microscopy (SEM) and nanofibers diameters were found to be around 200 nm. The novel nanofiber sheet was examined as an extracting medium to isolate some selected chlorobenzenes (CBs), as model compounds, from aquatic media. The extracted analytes were desorbed using μL-amounts of solvent and eventually an aliquot of extractant was injected into gas chromatography–mass spectrometry (GC–MS). Various parameters affecting the extraction and desorption processes were optimized. The developed method proved to be convenient and offers sufficient sensitivity and a good reproducibility. Limits of detection achieved for CBs with the developed analytical procedure ranged from 19 to 33 ng L^?1, while limits of quantification were from 50 to 60 ng L^?1. The relative standard deviations (RSD) at a concentration level of 0.1 ng mL^?1 and 1 ng mL^?1 were in the range of 8–14% and 5–11% (n = 3), respectively. The calibration curves of analytes were investigated in the range of 50–1000 ng L^?1 and R² between 0.9739 and 0.9932 were obtained. The developed method was successfully applied to the extraction of selected CBs from tap and river water samples. The relative recovery (RR) percentage obtained for the spiked real water samples at 0.1 ng mL^?1 and 1 ng mL^?1 level were 93–103% and 95–104%, respectively. The whole procedure showed to be conveniently applicable and quite easy to handle.     

Mesoporous silica thin films for molecular sieving and electrode surface protection against biofouling

Electrode fouling is a major challenge for the long term use of sensors in real samples as it leads to the decay of the electroanalytical signal and is often caused by the formation of an inhibiting layer formed by biomolecules. We demonstrate here that ordered and vertically aligned mesoporous silica generated at the surface of an indium tin oxide electrode by electrochemically assisted self-assembly act as a molecular sieve and a protective layer for the electrode surface. They indeed prevent the adsorption of size excluded large undesired molecules (e.g. haemoglobin) while allowing the detection of small redox active molecules likely to reach the electrode surface through the film (e.g. propranolol) with almost no loss of sensitivity. At a bare electrode, the oxidation of propranolol is completely inhibited in the presence of 5 μM haemoglobin. At a modified electrode, the sensitivity for propranolol in the absence of haemoglobin is (72.8 ± 2.9) mA mol^− 1 (R² = 0.992, N = 7) and it remains similar in the presence of 5 μM haemoglobin with a value of (67.4 ± 7.2) mA mol^− 1 (R² = 0.992, N = 7).     

Application of a laser produced plasma: Experimental Stark widths of single ionized lead lines

The optical emission spectroscopy from laser produced plasma generated by a 10,640 Å radiation, with an irradiance of 1.4 × 10¹⁰ W cm^− 2 on several lead targets, in vacuum and in an atmosphere of argon, was recorded and analyzed between 1900 and 7000 Å. The Local Thermodynamic Equilibrium conditions and plasma homogeneity have been checked. Stark widths for 31 lines of Pb II have been measured. These lines measured in this work correspond to the transitions 7s → 6p, n(n = 8, 9, 10)s → 7p, n(n = 7, 8)p → 7s, n(n = 7, 8)p → 6p², n(n = 7, 8)d → 7p, n(n = 5, 6)f → 6d, n(n = 5, 6)f → 6p². The population level distribution and the corresponding temperatures were obtained using Boltzmann plots. The plasma electron densities were determined using well-known Stark broadening parameters of spectral lines. Special attention was dedicated to the possible self-absorption of the different transitions. Temporal evolution of the plasma parameters was studied between 0.1 and 9 μs. Stark broadening parameters of the spectral lines were measured at 2.5 μs where the electron temperature was close to 11,300 K and the electron density to 0.8 × 10¹⁶ cm^− 3. The experimental results obtained have been compared with the experimental and theoretical values given by other authors. A systematic trend of this parameter versus temperature of 4244.9 Å Pb II line has been presented.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Insertion of ketenes into lanthanocene n-butylamide and imidazolate complexes

Reaction of Cp₂LnNHⁿBu with 1 equiv. of Ph₂CCO in toluene affords dimeric complexes [Cp₂Ln(OC(CHPh₂)NⁿBu)]₂ [Ln = Yb (1), Dy (2)], derived from a formal insertion of the CC bond of the ketene into the N–H bond. Treatment of CpErCl₂ with 2 equiv. of LiNHⁿBu followed by reacting with Ph₂CCO affords a rearrangement product [Cp₂Er(OC(CHPh₂)NⁿBu)]₂ (3). Treatment of [Cp₂Ln(μ-Im)]₃ (Im = imidazolate) with PhRCCO gives [Cp₂Ln(μ-OC(Im)CPhR)]₂ [R = Et, Ln = Yb (4); R = Ph, Ln = Yb (5), Er (6)]. In contrast to the previous observations that [Cp₂ErNⁱPr₂]₂ and [Cp₂ErNHEt]₂ react with ketenes to give di-insertion products, in the present cases the presence of excess of ketenes has no influence on the final product even with prolonged heating and only monoinsertion products are isolated. All these complexes were characterized by elemental analysis, IR and mass spectroscopies. The structures of complexes 1 and 3–6 were also determined through X-ray single crystal diffraction analysis.     

Rhizopus arrhizus-mediated asymmetric reduction of arylalkanones: unusual anti-Prelong products with benzyl alkyl ketones

Rhizopus arrhizus-mediated microbial reduction of various aryl alkyl ketones afforded chiral carbinols in good yields and high enantiomeric purity. The most striking feature was the formation of the anti-Prelog (R)-alcohols with the benzyl alkyl ketones, while the other ketones ArXCOR (X = (CH₂)_n, n = 0 or 2, OCH₂ or SCH₂ and R = Me/Et/n-Bu) furnished (S)-alcohols.