Economical and ecological utility oriented analysis of the process of anaerobic digestion of waste waters

A problem which has been constantly emphasized is the creation of criteria adequate to characterize the complexity of ecological analysis. The objective of the present paper is to demonstrate the capabilities of multiattribute utility theory in difficult-to-formalize problems. The multiattribute utility and the proposed algorithms provide a logically and operationally tested method which includes value in complex ecological problems. The results obtained and the constructed utility functions should be accepted as an iterative stage in real investigations, rather than as complete research that offer a final decision. The value estimations of the decision maker are the basis for interest in a given ecological problem. But they are often not explicitly or consistently addressed in the real investigations. The proposed methods account for otherwise uninterpretable information. The constructed value function can be used for automatic computer control and monitoring of anaerobic waste water digestion, which could reveal a new potential from the practical point of view.     

碾压混凝土坝施工层面变形分析模型

针对碾压混凝土坝施工层面对大坝变形产生显著影响的问题,深入研究了施工层面的变化性质及规律,提出了层面不同阶段变形的模拟方法,建立了施工层面有厚度和无厚度分析模型,提出的模型能反映层面的弹性变形、衰减蠕变、不可逆变形以及加速蠕变等变形状态．实例分析表明:所提出的碾压混凝土坝施工层面有厚度和无厚度分析模型能较客观地模拟大坝的结构变化形态,尤其是施工层面有厚度分析模型较完整地模拟了层面的渐变规律,其计算结果与原位监测成果吻合较好．同时,提出的方法和建立的分析模型可推广应用于常规混凝土坝,特别是坝基内断层和夹层等变形规律的分析．     

“小麦发育后期茎秆抗倒性的数学模型”综述

2011年第8届全国研究生数学建模竞赛C题是一个农业生产中小麦倒伏问题,在给出3年原始测量数据的基础上要求建立小麦发育后期茎秆抗倒性的数学模型,内容包括小麦性状数据处理和弹性力学模型.综述为C题竞赛总结,含问题的提出、问题的解答与评阅情况、存在问题及研究建议.     

Calculation of the Thermoelastoplastic Nonaxisymmetric Stress-Strain State of Layered Orthotropic Shells of Revolution

The methods for determining the nonaxisymmetric thermoelastoplastic stress-strain state of layered orthotropic shells of revolution are developed. It is assumed that the layered package deforms without mutual slippage or separation of layers. The problem is solved using the geometrically nonlinear theory of shells based on the Kirchhoff-Love hypotheses. In the isotropic layers, plastic deformations may appear, whereas the orthotropic layers deform in the elastic region. It is assumed that the mechanical properties of the materials are temperature-dependent. The thermoplasticity equations are presented in a form corresponding to the method of additional deformations. The order of the system of partial differential equations obtained is reduced with the help of trigonometric series in the circumferential coordinate. The resulting systems of ordinary differential equations are solved by the Godunov technique of discrete orthogonalization. The nonaxisymmetric thermoelastoplastic stress-strain states of layered shells of revolution are considered as examples.     

Absolute Continuity of Measures in the Class of Markov and Semi-Markov Processes of Diffusion Type

The property of absolute continuity of measures in the class of one-dimensional semi-Markov processes of diffusion type is investigated. The measure of such a process can be composed of two measures. The first one is a distribution of a random track, and the second one is a conditional distribution of a time run along the track. The desired density is represented in the form of product of two corresponding densities.     

Specialization of Loop Rules of a Sequent Calculus of Intuitionistic Temporal Logic with Time Gaps

The paper deals with the loop-rule problem in the first-order intuitionistic temporal logic sequent calculus LBJ. The calculus LBJT is intended for the specialization of the antecedent implication rule. The invertibility of some of the LBJT rules and the syntactic admissibility of the structural rules and the cut rule in LBJT, as well as the equivalence of LBJ and LBJT, are proved. The calculus LBJT2 is intended for the specialization of the antecedent universal quantifier and antecedent box rules. The decidability of LBJT2 is proved.     

The effect of modeling of velocity fluctuations on prediction of collection efficiency of cyclone separators

The effect of modeling of velocity fluctuations on the prediction of collection efficiency of cyclone separators has been numerically investigated using the Reynolds stress turbulence model (RSTM) and large eddy simulation (LES). The Eulerian–Lagrangian modeling approach of CFD code Fluent 6.3.26 has been employed to simulate the three dimensional, unsteady turbulent gas–solid flows in a Stairmand high efficiency cyclone. The simulated results have been compared with experimental observations available in the literature. The analysis of results shows that the RSTM and the LES have adequately predicted the mean flow field. Results of the present study demonstrate that the LES has good performance on prediction of fluctuating flow field and collection efficiency for each and every particle size. However, the performance of the RSTM is found poor in terms of prediction of velocity fluctuations and collection efficiency, especially for small particles. This relates to the precessing of the vortex core phenomenon, which is resolved more accurately by LES as compared to the RSTM simulation. The results suggest that the prediction of collection efficiency, especially for small particles is greatly influenced by the simulation of velocity fluctuations in cyclones.     

On Basis Properties of a Part of Eigenfunctions of the Problem of Vibrations of a Smooth Inhomogeneous String Damped at the Midpoint

The boundary problem is considered which occurs in the theory of small transversal vibrations of a smooth inhomogeneous string. The ends of the string assumed to be fixed and the midpoint of the string is damped by a pointwise force. The problem is reduced to a spectral problem for a nonmonic quadratic operator pencil. The spectrum of the pencil (i. e. the set of normal eigenvalues) can be presented as a union of two subsequences. One of the subsequences approaches the real axis. Under an additional condition the second branch approaches a horizontal line located in the upper half–plane. The basis properties of the sets of projections (onto the corresponding subintervals) of eigenfunctions corresponding to each of the subsequences are investigated.     

Complete system of two-dimensional invariants for formulation of triangular finite element of composite shells

The paper describes a system of invariants of symmetric two-dimensional tensors defined on a plane or a surface. The system comprises the well-known first and second invariants and a new quantity called the combined invariant of two tensors. The focus is on the expression for the invariants in terms of normal components of the tensors determined in three different directions on the surface. The system of invariants is used to construct a triangular finite element for geometrically nonlinear analysis of shear deformable anisotropic shells subject to the Reissner–Mindlin assumptions. The relations obtained allow one to readily determine the strain energy of the element for the normal components of the stress and strain tensors in the direction of the element edges. Numerical examples are given to demonstrate some nonlinear capabilities of the element.     

快速分析松脂澄清脂液中松节油含量的新方法

本文用统计方法研究思茅松松脂澄清脂液中松节油含量与酸值的相关关系，建立了不同于通常所用蒸馏法的新分析方法──酸值法。新方法快速、简捷、准确、经济、缩短分析时间５０分钟（７１％）；重复试验的极差的均值为０．１％，降低分析成本７０％；已用于云南省地方标准。     

Approximate Description of the Dynamics of Thin Isotropic Elastic Coatings and Interlayers by Using Asymptotics of High Order of Accuracy

Asymptotically accurate low-frequency models for isotropic elastic coatings and interlayers are developed. The main constraint is the requirement on contact conditions for the layer and the base that at least one of the boundary conditions must include the displacement component in an explicit form. The displacement and stress fields in the three-dimensional elastic system are sought in the form of asymptotic expansion into power series of a small parameter — the ratio between the half-thickness of the layer and the minimum length of the wave in the longitudinal direction. The action of the layer is approximated by impedance boundary conditions, which are transferred to the contact surface with the basic, more thick body. These conditions are obtained with an asymptotic error up to and including the sixth order of magnitude. A numerical testing, which is carried out with the example of partial waves, shows a satisfactory accuracy, comparable with that of high-order theories of plates. The results obtained can be utilized in fast algorithms for calculating spectra of natural waves in half-spaces, thick laminated plates, and shallow shells with coatings and interlayers. The physical limit of applicability of the theory developed is the frequency of the first quasi-resonance in the corresponding deformable system. The number of alternating interlayers is unlimited. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 783–794, November–December, 2005.     

The application of a mathematical model of sustainability to the results of a semi-quantitative Environmental Impact Assessment of two iron ore opencast mines in Iran

The paper outlines the application of a mathematical model of sustainability to an Environmental Impact Assessment (EIA) of two opencast iron ore mines in Iran. The model’s application to the EIA, which used the Folchi method, was undertaken for the purpose of indicating the potential level and nature of sustainability (if appropriate) of the two mines.The results indicated that both Chogart and Gol-e-Gohar iron ore mine were deemed to be potentially unsustainable. The results suggests the delicate balance and failure of achieving some form of sustainability in regards to mining in Iran, due to the impacts it has upon the local environment and community affected. The paper concludes as to the potential significance of the model’s application in the attainment of the goal of sustainable mining.     

The distribution of normalized zero-sets of random meromorphic functions

This paper is concerned with the distribution of normalized zero-sets of random meromorphic functions.The normalization of the zero-set plays the same role as the counting function for a meromorphic function in Nevanlinna theory.The results generalize the theory of Shiffman and Zelditch on the distribution of the zeroes of random holomorphic sections of powers of positive Hermitian holomorphic line bundles.As in a very special case,our paper resembles a form of First Main Theorem in classical Nevanlinna The...     

对国际投资盈利机会的比较分析

本文应用优劣解距离法对国际投资的盈利机会进行比较分析，该方法不仅简单和直观，而且计算结果有较高的满意度，具有良好的实用价值．     

On the construction and investigation of solutions of boundary value problems of thermoviscoelasticity

The uncoupled mixed boundary value problem of thermoviscoelasticity is considered in a quasistatic formulation. The temperature distribution is assumed nonstationary and inhomogeneous. The influence of the temperature on the viscoelastic properties of the material is taken into account by the introduction of a reduced time. The equations of state of the material are written in differential form as a system of kinetic equations in some tensor-type strain parameters. The system mentioned is equivalent to a Volterra integral equation with kernel in the form of a sum of exponents. The differential approach used is apparently more convenient for numerical realization /1/ (especially in nonuniform problems) and results in a substantially different mathematical formulation as compared with that based on the integral form of writing the equations of state investigated in /2,3/. Precisely for going over to the boundary value problem are the kinetic differential equations converted into an operator differential equation in Hubert space. The existence, uniqueness, and stability of the solution of the problem formulated are established, and conditions for the convergence of the Galerkin approximations and the stability of the difference approximations in time are formulated.     

Stability of solutions of Volterra integrodifferential equations

Systems with past memory (or after-effect), the state of which is given by nonlinear Volterra- type integrodifferential equations with small perturbations, are investigated. The equations depend on functionals in integral form and, in particular, on analytic functionals represented by Fréchet series. The integral kernels can allow for singularities with Abel’s kernel. The stability under persistent disturbances, and the structure of the general solution, are investigated in the neighborhood of zero for an equation with holomorphic nonlinearity assuming asymptotic stability of the trivial solution of the linearized unperturbed equation. Stability in the critical cases (in Lyapunov’s sense) of a single zero root and of pairs of pure imaginary roots for the unperturbed equation is analyzed.     

Analysis of Compression Stress of a Filler and Bending of a Sandwich Panel under Multipoint Loading

The distribution of transverse stresses in the midlayer of a composite sandwich panel under multipoint loading is investigated. The stresses averaged across the thickness of a soft filler are estimated using a discrete model. Finite expressions for the compression of the filler along the length of the panel are derived by means of superposition of the local effects from the bending of face layers under an infinite system of transverse point forces constant across the panel thickness. The effects of compression and transverse extension of the filler, in the case of a high distribution frequency of these forces, i.e., when the distance between the forces is comparable to the panel thickness, are revealed. Compression of the panel by two systems of forces applied symmetrically or nonsymmetrically to the upper and lower faces is considered. The bending characteristics in the cases of loading with point forces and piecewise distributed loads are compared. The formulas obtained are used to determine the length of a small region on the panel surface for which the local effects from the distributed pressure and the point force are equivalent. The corresponding estimates are obtained in a closed form. The analysis, carried out with varied parameters of the structure, allows us to elucidate the peculiarities of the effect of discontinuous loads on the design characteristics in the local zones, using finite expressions derived by the operational method.     

平衡单向分类随机效应模型中的多个异常值检验

该文研究平衡单向分类随机效应模型中多个异常值的检验问题. 在基于随机效应上的均值滑动模型下导出了似然比检验统计量, 并给出了其精确分布及水平异常值的检验过程. 在基于观测误差上的均值滑动模型下,利用得分检验统计量给出了多个异常值的检验过程.     

Numerical and experimental study of mitigation of welding distortion

Welding stresses and deformations are closely related phenomena. During the heating and cooling cycles thermal strains may occur in the weld and adjacent area. The strains produced during the heating stage of welding are always accompanied by plastic deformation of the metal. The stresses resulting from these strains combine and react to produce internal forces that cause a variety of welding distortions. Welding deformation needs to be minimized and also the designer should know before hand the extent of deformation so that it can be accounted for in the design as well as in the construction stages.In this paper, heat sinking as a method of distortion mitigation has been studied. Heat sinking has been affected by circulating water through channel clamped at the bottom surface of the plates undergoing welding. The pseudolinear equivalent constant rigidity concept has been used in this investigation for thermo-mechanical analysis of plates undergoing welding with simultaneous heat sinking. The initial nonlinear problem with varying modulus dependent on temperature is transformed into a pseudolinear equivalent system of constant rigidity that is solved by linear analysis.The numerical results compared very well with those of the experimental ones. The proposed concept is found to be computationally more efficient and simpler to model compared to FEM for solving similar thermo-elasto-plastic nonlinear problems. The procedure presented in this work and the results thus obtained, holds a great promise for determining the heat sinking parameters for effectively controlling welding distortion.     

Modelling and analysis of dynamics of viral infection of cells and of interferon resistance

Interferons are active biomolecules, which help fight viral infections by spreading from infected to uninfected cells and activate effector molecules, which confer resistance from the virus on cells. We propose a new model of dynamics of viral infection, including endocytosis, cell death, production of interferon and development of resistance. The novel element is a specific biologically justified mechanism of interferon action, which results in dynamics different from other infection models. The model reflects conditions prevailing in liquid cultures (ideal mixing), and the absence of cells or virus influx from outside. The basic model is a nonlinear system of five ordinary differential equations. For this variant, it is possible to characterise global behaviour, using a conservation law. Analytic results are supplemented by computational studies. The second variant of the model includes age-of-infection structure of infected cells, which is described by a transport-type partial differential equation for infected cells. The conclusions are: (i) If virus mortality is included, the virus becomes eventually extinct and subpopulations of uninfected and resistant cells are established. (ii) If virus mortality is not included, the dynamics may lead to extinction of uninfected cells. (iii) Switching off the interferon defense results in a decrease of the sum total of uninfected and resistant cells. (iv) Infection-age structure of infected cells may result in stabilisation or destabilisation of the system, depending on detailed assumptions. Our work seems to constitute the first comprehensive mathematical analysis of the cell-virus-interferon system based on biologically plausible hypotheses.