Formation of sodium 6-hydroxy-2-naphthoate in the <Emphasis Type="Italic">Kolbe-Schmitt</Emphasis> reaction

This work is an extension of our investigation of the mechanism of the Kolbe-Schmitt reaction of sodium 2-naphthoxide. The carboxylation reaction of sodium 2-naphthoxide in the position 6 is examined by means of the B3LYP/LANL2DZ method. After the initial formation of sodium 2-naphthoxide-CO₂ complex, the carbon of the CO₂ moiety performs an electrophilic attack on the naphthalene ring in position 8. Further transformations lead to the formation of sodium 6-hydroxy-2-naphthoate. Our findings are in good agreement with the experimental results on the carboxylation reaction of sodium 2-naphthoxide. Correspondence: Svetlana Marković, Faculty of Science, University of Kragujevac, 34000 Kragujevac, Serbia.     

Formation of sodium 6-hydroxy-2-naphthoate in the Kolbe-Schmitt reaction

This work is an extension of our investigation of the mechanism of the Kolbe-Schmitt reaction of sodium 2-naphthoxide. The carboxylation reaction of sodium 2-naphthoxide in the position 6 is examined by means of the B3LYP/LANL2DZ method. After the initial formation of sodium 2-naphthoxide-CO₂ complex, the carbon of the CO₂ moiety performs an electrophilic attack on the naphthalene ring in position 8. Further transformations lead to the formation of sodium 6-hydroxy-2-naphthoate. Our findings are in good agreement with the experimental results on the carboxylation reaction of sodium 2-naphthoxide.     

Rapid SnCl<Subscript>2</Subscript> catalyzed phenylselenoetherification of (<Emphasis Type="Italic">Z</Emphasis>)- and (<Emphasis Type="Italic">E</Emphasis>)-hex-4-en-1-ols

A fast and efficient method for intramolecular heterocyclization of (Z)- and (E)-hex-4-en-1-ols was developed. The method does not cause side reactions of the substrates and provides the cyclic phenylselenoethers in high yields after only few minutes. A catalytic amount of SnCl₂ increased the yield, but in the presence of an equimolar amount of SnCl₂, formation of corresponding cyclic ethers were almost quantitative and reaction occurred instantaneously under extremely mild experimental conditions. Correspondence: Zorica M. Bugarčić, Department of Chemistry, Faculty of Science, University of Kragujevac, Radoja Domanovića 12, P.O.Box 60, YU-34000 Kragujevac, Serbia.     

Condensation of Stereoisomeric 2-Acetyl-2,3-diphenyloxiranes with Ethyl Trifluoroacetate

The reaction of E-2-acetyl-2,3-diphenyloxirane with ethyl trifluoroacetate in the presence of sodium isopropoxide leads to 3-hydroxy-2,3-diphenyl-6-trifluoromethyl-2,3-dihydro-4H-pyran-4-one. Under the same conditions Z-acetyloxirane forms 3-hydroxy-2-phenyl-5-trifluoromethylfuran as a result of retroaldol cleavage of the initial cyclocondensation product.     

Effect of sodium cation on the electrochemical reduction of CO<Subscript>2</Subscript> at a copper electrode in methanol

The electrochemical reduction of CO₂ with a Cu electrode in methanol was investigated with sodium hydroxide supporting salt. A divided H-type cell was employed; the supporting electrolytes were 80 mmol dm⁻³ sodium hydroxide in methanol (catholyte) and 300 mmol dm⁻³ potassium hydroxide in methanol (anolyte). The main products from CO₂ were methane, ethylene, carbon monoxide, and formic acid. The maximum current efficiency for hydrocarbons (methane and ethylene) was 80.6%, at −4.0 V vs Ag/AgCl, saturated KCl. The ratio of current efficiency for methane/ethylene, r _f(CH₄)/r _f(C₂H₄), was similar to those obtained in LiOH/methanol-based electrolyte and larger relative to those in methanol using KOH, RbOH, and CsOH supporting salts. In NaOH/methanol-based electrolyte, the efficiency of hydrogen formation, a competing reaction of CO₂ reduction, was suppressed to below 4%. The electrochemical CO₂ reduction to methane may be able to proceed efficiently in a hydrophilic environment near the electrode surface provided by sodium cation.     

Synthesis and some properties of 6-di(tri)fluoromethyl-and 5-di(tri)fluoroacetyl-3-methyl-1-phenylpyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazol-4(1<Emphasis Type="Italic">H</Emphasis>)-ones

Condensation of 4-acetyl-5-hydroxy-3-methyl-1-phenylpyrazole with R^FCO₂Et (R^F = CF₂H, CF₃) in the presence of LiH affords 4-di(tri)fluoroacetoacetyl-5-hydroxy-3-methyl-1-phenylpyrazoles from which 6-di(tri)fluoromethyl-and 5-di(tri)fluoroacetyl-3-methyl-1-phenylpyrano[2,3-c]pyrazol-4(1H)-ones were synthesized. The reactions of pyrano-pyrazoles with hydrazine hydrate, ethyl mercaptoacetate, or aromatic amines proceed at the C(6) atom with pyrone ring opening and formation of aminoenones, pyrazoles, or thiophenes with the 5-hydroxy-3-methyl-1-phenyl-4-pyrazolyl fragment. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2750–2754, December, 2005.     

A kinetic study on the bioremediation of sodium cyanide and acetonitrile by free and immobilized cells ofPseudomonas putida

Pseudomonas putida capable of utilizing organic nitrile (acetonitrile) and inorganic cyanide (sodium cyanide) as the sole source of carbon and nitrogen was isolated from contaminated industrial sites and waste water. The bacterium possesses nitrile aminohydrolase (EC 3.5.5.1) and amidase (EC 3.5.1.4), which are involved in the transformation of cyanides and nitriles into ammonia and CO₂ through the formation of amide as an intermediate. Both of the enzymes have a high selectivity and affinity toward the⁻Cn group. The rate of degradation of aceotnitrile and sodium cyanide to ammonia and CO₂ by the calcium-alginate immobilized cells ofP. putida was studied. The rate of reaction during the biodegradation of acetonitrile and sodium cyanide, and the substrate- and product-dependent kinetics of these toxic compounds were studied using free and immobilized cells ofP. putida and modeled using a simple Michaelis-Menten equation.     

g-C3N4/Bi2O2CO32D纳米片复合材料的制备及可见光催化性能研究

采用自组装和化学沉淀法分别制得两种可见光驱动复合材料石墨相氮化碳/碳酸氧铋(g-C_3N_4/Bi_2O_2CO_3).采用X射线衍射光谱(XRD),紫外可见光谱、扫描电镜(SEM)、N_2吸附、电化学阻抗谱(EIS)和X射线光电子能谱(XPS)等分析手段对制备的催化剂进行了表征.结果表明,制备方法对纳米复合材料的晶相、形态及光学性能没有影响,但是影响g-C_3N_4和Bi_2O_2CO_3之间的相互作用力,导致光生电子-空穴对的分离速率存在显著差异.以可见光驱动苯酚和罗丹明B的降解实验为探针反应检测催化剂的光催化性能.实验结果表明自组装法得到的异质结催化剂中相互作用力更强,催化效果最高.O_2-是罗丹明B降解反应的主要活性物种,染料的光敏化、Bi_2O_2CO_3与g-C_3N_4综合效应,导致光生载流子电荷分离效率更高.     

Methane Decomposition in a Barium Titanate Packed-Bed Nonthermal Plasma Reactor

The behavior of lattice oxygen species of the ferroelectric material during methane oxidation was investigated using a nonthermal plasma reactor packed with BaTiO ₃ pellets. Lattice oxygen species in BaTiO ₃ play an important role in the formation of N ₂ O and the oxidation of CH ₄ . The oxidation products such as CO and CO ₂ were formed from independent reaction pathways. Lattice oxygen species were able to preferentially oxidize the carbon species deposited on the pellet surface into CO. Also, N ₂ O and NO _x were independently formed in the N ₂–O ₂ reaction, suggesting that different oxygen species give N ₂ O and NO _x. N ₂ O was produced by the oxidation of molecular nitrogen with lattice oxygen species.     

Preparation of <Emphasis Type="Italic">α</Emphasis>-methyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactone: Mechanism of its formation and utilization in 2-methyl-1-tetralone synthesis

α-Methyl-γ-butyrolactone (III) has been prepared directly from γ-butyrolactone (I) in 89 % yield by selective monomethylation conditions: K₂CO₃/DMC/210°C/7 h. The reaction mechanism was elucidated and described. An intermediate and two byproducts: methyl tetrahydro-3-methyl-2-oxofuran-3-carboxylate (II), 3-(methoxycarbonyl)propyl methyl carbonate (IV) and 3-(methoxycarbonyl)butyl methyl carbonate (V) were identified. The high temperature disproportionation of K₂CO₃ in the presence of dimethyl carbonate to MeOK was observed. The new selective synthesis of 2-methyl-1-tetralone (VI) from α-methyl-γ-butyrolactone (III) by Friedel-Crafts conditions was performed in 79 % yield.     

Catalyzed Peptide Bond Formation in the Gas Phase. Role of Bivalent Cations and Water in Formation of 2-Aminoacetamide from Ammonia and Glycine and in Dimerization of Glycine

The formation of 2-aminoacetamide from ammonia and glycine and N-glycylglycine from two glycine molecules with and without Mg²⁺, Cu²⁺, and Zn²⁺ cations as catalysts have been studied as model reactions for peptide bond formation using the B3LYP functional with 6–311+G(d,p) and 6–31G(d) basis sets. The B3LYP method was also used to characterize the nine gas–phase complexes of neutral glycine, its amide (2-aminoacetamide), and N-glycylglycine with Lewis acids Mg²⁺, Cu²⁺, and Zn²⁺, respectively. Further, the gas-phase hydration of metal-coordinated complexes of glycine, 2-aminoacetamide, and N-glycylglycine was also investigated. Finally, the effect of water on the structure and reactivity of the metal coordinated complexes was determined. Enthalpies and Gibbs energies for the stationary points of each reaction have been calculated to determine the thermodynamics of the reactions investigated. A substantial decrease in reaction enthalpies and Gibbs energies was found for glycine–ammonia and glycine–glycine reactions coordinated by Mg²⁺, Cu²⁺, and Zn²⁺ ions compared to those of the uncoordinated 2-aminoacetamide bond formation. The formation of a dipeptide is a more exothermic process than the creation of simple 2-aminoacetamide from glycine. The energetic effect of the transition metal ions Cu²⁺ and Zn²⁺ is of similar strength and more pronounced than that of the Mg²⁺ cation. The basicity order of the amides investigated shows the order: NH₂CH₂CO₂H < NH₂CH₂CONH₂ < NH₂CH₂CONHCH₂CO₂H. Interaction enthalpies and Gibbs energies of metal ion–amide complexes increase as Mg²⁺2+2+. In both reactant (glycine) and reaction products (2-aminoacetamide, N-glycylglycine) dihydration caused considerable reduction (about 200–500 kJ-mol^–1) of the strength of the bifurcated metal–amide bonds. Solvent effects also reduce the reaction enthalpy and Gibbs energy of reactions under study.     

Lipase-catalyzed enantioselective transesterification of 3-hydroxy-3-(2-thienyl) propanenitrile in liquid carbon dioxide

The transesterification of 3-hydroxy-3-(2-thienyl) propanenitrile catalyzed by Pseudomonas fluorescens lipase (PFL) in liquid carbon dioxide (CO₂) was reported. Compared with that in organic solvent (n-hexane), the catalytic performance of PFL was dramatically enhanced in liquid CO₂. Under the optimal reaction conditions, PFL exhibited an excellent enantioselectivity (E-value: 92.9) with a high enzyme activity (82.5?μmol/g/min). Besides, the remained (S)-3-hydroxy-3-(2-thienyl) propanenitrile with high enantiomeric purity (ee?>?99%) was obtained in 4?h when the conversion was about 52%.

Lipase-catalyzed transesterification of 3-hydroxy-3-(2-thienyl) propanenitrile in liquid CO₂     

Acetylenchemie, 33. Mitt.: Synthese von 2-substituierten Dihydrofuro[2,3-b]chinolinen

Summary The reaction of 3-iodo-4-methoxy-2(1H)-quinolinone (1) and 3-iodo-4,6,8-trimethoxy-2(1H)-quinolinone (2) with 2-methyl-3-butyn-2-ol under modified Heck-conditions gave the 2-substituted derivatives 2-(1-hydroxy-1-methylethyl)-4-methoxyfuro[2,3-b]-quinoline (3) and 2-(1-hydroxy-1-methylethyl-4,6,8-trimethoxyfuro[2,3-b]-quinoline (4). By a subsequent hydrogenation-reaction with a homogeneous catalyst (PtO₂/Rh₂O₃), the furoquinoline-derivatives yielded the dihydrofuro-[2,3-b]quinolines, identified as 2-(1-hydroxy-1-methylethyl-4-methoxy-2,3-dihydrofuro[2,3-b]quinoline (5) (racemic platydesmine) and 2-(1-hydroxy-1-methylethyl)-4,6,8-trimethoxy-2,3-dihydrofuro-[2,3-b]quinoline (6) (racemic precursor of O⁴-methylptelefolonium salt).

     

A selective convenient ruthenium-mediated synthesis of mixed acetals

Addition of alcohols and phenols to allyl ethers catalyzed mainly by ruthenium complexes was studied. Complexes of ruthenium generated in situ from precursors such as {[RuCl₂(1,5-COD)]_x} or [Ru₃(CO)₁₂] and from external ligands such as phosphines (e.g. PPh₃, PBu₃, BINAP) or phosphites (e.g. P(OPh)₃, P(OMe)₃) were found to be particularly efficient catalysts of the studied reactions. Transacetalization reaction could be practically completely eliminated by the addition of a base (particularly Na₂CO₃) to the catalytic systems. It was observed that the selectivity of mixed acetals formation increases with increasing value of Θ parameter of phosphines. Especially interesting results (0–5% of transacetalization) have been obtained for catalytic systems generated from {[RuCl₂(1,5-COD)]_x} or [Ru₃(CO)₁₂], phosphines (PPh₃, BINAP, dppe, tris(2,4,6-tri-metylphenyl)phosphine, or dppf) and Na₂CO₃. The mechanism of mixed acetals formation has been investigated using deuterated reagents. It is postulated that the examined reaction is a nucleophilic addition of ROH to a hydrido-π-allyl complex formed during oxidative addition of allyl substrate to metal complex. As a result, a new, selective, and convenient method of the synthesis of symmetrical and, in particular, unsymmetrical (mixed) acetals has been developed. Mixed acetals CH₃CH₂CH(OR¹)(OR²) may be obtained in the reaction of R¹-O-allyl with R²OH or R¹OH with R²-O-allyl, depending on the structure of R¹ and R².     

XPS Study of group IA carbonates

The results of systematic XPS measurements of all alkali metal carbonates (Li, Na, K, Rb and Cs) are presented. The first set of experiments was performed with “as received” commercial carbonate powders under liquid nitrogen conditions using a precooling procedure. A second set of experiments was performed under similar experimental conditions after a preliminary grinding (mechanical activation) of the carbonates. In addition, Na₂CO₃ ^*1H₂O, NaHCO₃ and KHCO₃ powders were studied. It was found that sample pre-cooling allows distinction between hydrocarbonates and carbonate hydrates. Storage in air leads to formation of hydrocarbonates at the surface of Li₂CO₃ and Na₂CO₃. This phenomenon being more pronounced in the former. In contrast, K₂CO₃ forms a hydrate with one H₂O molecule. Rb₂CO₃ and Cs₂CO₃ have hydrocarbonates as well as hydrates at the surface and this is more pronounced for Cs₂CO₃. Grinding of the carbonates results in the formation of hydrocarbonates at the surface, the tendency to do so was found to increase down the group IA, namely, K<Rb≪Cs. For the most part, the hydrocarbonates formed were unstable in vacuum even under liquid nitrogen conditions. Chemical trends in C 1s and O 1s binding energies in carbonates and hydrocarbonates of the Group IA are discussed and related to the nature of the anion and alkali cation.     

Die Darstellung der Oligosilane Si8 X 18 (X-Cl,OCH3) durch Photolyse von Silylquecksilberverbindungen

The formation of SiSi-bonds by a photochemical reaction of silylmercury compounds is described. The silylmercury compounds [(X ₃Si)₃Si]₂Hg (X=Cl, OCH₃) were synthesized via theVyazankin Hydrid method with (X ₃Si)₃SiH and Bis(t-butyl)mercury. By UV-irradiation of these products in hexane as a solvent, the oligosilanes [(X ₃Si)₃Si]₂ are formed in good yields. All these compounds are charactericed by spectroscopical methods.

     

Cross-condensation of derivatives of cyanoacetic acid and carbonyl compounds. 2. One-pot synthesis of substituted 2-amino-7-methyl-5-oxo-4,5-dihydropyrano[4,3-b]pyrans in ethanol and ionic liquid [bmim][PF6]

The three-component reaction of 4-hydroxy-6-methylpyran-2(2H)-one with cyanoacetic acid derivatives and carbonyl compounds in EtOH or in the ionic liquid, viz., 1-butyl-3-methylimidazolinium hexafluorophosphate ([bmim][PF₆]), affords substituted 2-amino-7-methyl-5-oxo-4,5-dihydropyrano[4,3-b]pyrans. The yield of substituted pyrano[4,3-b]pyrans in [bmim][PF₆] is by 10—14% higher than that in EtOH.     

Condensed Pyridine Bases. Synthesis and Reactions of Benzofuro[2,3-c]indeno[2,1-e]-, Benzothieno[2,3-c]Indeno[2,1-e]-, Benzofuro-[3,2-c]Indeno[2,1-e]- and Thieno[2,3:4′,5′]-thieno[3,2-c]indeno[2,1-e]pyridines

Condensation of hetarene carboxaldehydes with phthalide gave 2-(3-hydroxy-1-oxoinden-2-yl)benzo[b]furan and 2-(3-hydroxy-1-oxoinden-2-yl)-5-ethylthieno[2,3-b]thiophene. Starting from hetaryl acetic acids gave 3-(3-hydroxy-1-oxoinden-2-yl)benzo[b]furan and 3-(3-hydroxy-1-oxoinden-2-yl)benzo[b]thiophene. Acylation of 3-hydroxy-1-oxoinden-2-yl-substituted heterocycles using acetic anhydride in the presence of 70% HClO₄ leads to the formation of pentacyclic pyrilium salts. Pentacyclic indenopyridines are prepared by treating the pyrilium salts with ammonia. The reaction of the carbonyl group in the indenopyridines with hydroxylamine, hydrazine hydrate, and in reduction using NaBH₄ has been studied.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 435–443, March, 2005.     

基于密度泛函理论对等离子体中H/CO2相互作用的第一性原理研究

深入理解辐照条件下氢同位素与CO₂反应的微观机制,可为聚变堆氘氚燃料循环工艺的优化设计提供数据支撑。基于此,采用第一性原理计算研究了等离子体放电条件下H₂和CO₂的微观反应机制,研究了不同温度和氢同位素效应对反应过程的影响。通过内禀反应坐标（IRC）算法结合反应过渡态获得4条初始反应路径,并对比研究了生成产物CH₄及CH₃OH的2条路径在热力学上的容易程度,以及不同氢同位素对各个反应的影响。研究发现,氚的自发衰变或等离子体中的高能电子都会诱导氢同位素与CO₂发生反应,形成CO、H₂O、CH₄及CH₃OH等产物;在高能电子诱导CO₂的离解后,由4条初始反应路径组成的复杂反应可以自持发生,且该复杂反应中存在2种倾向;升高反应温度对CO₂转化为有机物（CH₄和CH₃OH）具有一定的促进作用。     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-(2-chloroethyl)glycine and -<Emphasis Type="SmallCaps">DL</Emphasis>-alanine esters

Two methods for the synthesis of N-(2-chloroethyl)glycine and-DL-alanine esters are proposed: 1) reductive amination of the C=O group of glyoxilic or pyruvic acids upon treatment with 2-chloroethylamine and sodium cyanoborohydride in methanol and 2) alkylation of 2-chloroethylamine with α-haloalkanoic acid esters in K₂CO₃-MeCN two-phase system. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2372–2374, December, 2007.