Surface-enhanced Raman spectroscopy of half-mustard agent

The detection and identification of chemical warfare agents is an important analytical goal. Herein, it is demonstrated that 2-chloroethyl ethyl sulfide (half-mustard, CEES) can be successfully analysed using surface-enhanced Raman spectroscopy (SERS). A critical component in this detection system is the fabrication of a robust, yet highly enhancing, sensor surface. Recent advances in substrate fabrication and in the fundamental understanding of the SERS phenomenon enable the development of improved substrates for practical SERS applications.     

Recent progress in surface enhanced Raman spectroscopy for the detection of environmental pollutants

Surface enhanced Raman spectroscopy (SERS) has emerged as one of the most promising analytical tools in recent years. Due to advantageous features such as sensitivity, specificity, ease of operation and rapidity, SERS is particularly well suited for environmental analysis. We summarize here some considerations with respect to the detection of pollutants by SERS and provide an overview on recent achievements in the determination of organic pollutants, heavy metal ions, and pathogens. Following an introduction into the topic and considering aspects of sensitivity, selectivity, reproducibility and portability, we are summarizing applications of SERS in the detection of pollutants, with sections on organic pollutants (pesticides, PAHs and PCBs, explosives), on heavy metal ions, and on pathogens. In addition, we discuss current challenges and give an outlook on applications of SERS in environmental analysis. Contains 174 references.

Ultrasensitive SERS Detection of Lysozyme by a Target‐Triggering Multiple Cycle Amplification Strategy Based on a Gold Substrate

An ultrasensitive surface enhanced Raman scattering (SERS) method has been designed to selectively and sensitively detect lysozyme. The gold chip as the detection substrate, the aptamer‐based target‐triggering cascade multiple cycle amplification, and gold nanoparticles (AuNPs) bio‐barcode Raman probe enhancement on the gold substrate are employed to enhance the SERS signals. The cascade amplification process consists of the nicking enzyme signaling amplification (NESA), the strand displacement amplification (SDA), and the circular‐hairpin‐assisted exponential amplification reaction (HA‐EXPAR). With the involvement of an aptamer‐based probe, two amplification reaction templates, and a Raman probe, the whole circle amplification process is triggered by the target recognition of lysozyme. The products of the upstream cycle (NESA) could act as the “DNA trigger” of the downstream cycle (SDA and circular HA‐EXPAR) to generate further signal amplification, resulting in the immobility of abundant AuNPs Raman probes on the gold substrate. “Hot spots” are produced between the Raman probe and the gold film, leading to significant SERS enhancement. This detection method exhibits excellent specificity and sensitivity towards lysozyme with a detection limit of 1.0×10^?15 M . Moreover, the practical determination of lysozyme in human serum demonstrates the feasibility of this SERS approach in the analysis of a variety of biological specimens.     

Distinguishing breast cancer cells using surface-enhanced Raman scattering

The detection and identification of epidermal growth factor receptor 2 (HER2)-positive breast cancer cells is crucial for the clinic therapy of breast cancer. For the aim of the detection, a novel surface-enhanced Raman scattering (SERS) probe for distinguishing breast cancers at different HER2 statuses is reported in this paper. In such a probe, anti-HER2 antibody-conjugated silver nanoparticles have been synthesized for specific targeting of HER2-positive breast cancer cells. More importantly, different from the previously reported SERS probe for targeting cancer cells, p-mercaptobenzoic acid is utilized as both the Raman reporter and the conjugation agent for attaching antibody molecules, which leads to a much simplified structure. For investigating the ability of such a probe to distinguish breast cancer cells, SKBR3 and MCF7 cells were chosen as two model systems, which are HER2-positive- and HER2-negative-expressing cells, respectively. The experimental results reveal that SKBR3 cells exhibit much stronger SERS signals than MCF7 cells, indicating that the probe could be utilized to distinguish breast cancer cells at different HER2 statuses. This kind of SERS probe holds a potential for a direct detection of living breast cancer cells with the advantages of easy fabrication, high SERS sensitivity, and biocompatibility.     

Localized flexible integration of high-efficiency surface enhanced Raman scattering (SERS) monitors into microfluidic channels

We report here a facile approach for flexible integration of high efficiency surface enhanced Raman scattering (SERS) monitors in a continuous microfluidic channel. In our work, femtosecond laser direct writing was adopted for highly localizable and controllable fabrication of the SERS monitor through a multi-photon absorption (MPA) induced photoreduction of silver salt solution. The silver substrate could be shaped into designed patterns, and could be precisely located at the desired position of the microchannel bed, giving the feasibility for real-time detection during reactions. SEM and TEM images show that the silver substrates were composed of crystallized silver nanoplates with an average thickness of 50 nm. AFM results reveal that the substrates were about 600 nm in height and the surface was very rough. As representative tests for SERS detection, p-aminothiophenol (p-ATP) and flavin adenine dinucleotide (FAD) were chosen as probing molecules for microfluidic analysis at visible light (514.5 nm) excitation, exhibiting an enhancement factor of ~10(8). In addition, the combination of the SERS substrate with the microfluidic channel allows detection of inactive analytes through in situ microfluidic reactions.     

Direct detection of DNA using 3D surface enhanced Raman scattering hotspot matrix

Silver nanoparticles (AgNPs) are evaporatively self‐assembled into the 3D surface enhanced Raman scattering (SERS) hotspot matrix with the assistant of glycerol to improve the spectral reproducibility in direct DNA detection. AgNPs and DNA in the glycerol‐stabilized 3D SERS hotspot matrix are found to form flexible sandwich structures through electrostatic interaction where neighboring AgNPs create uniform and homogeneous localized surface plasmon resonance coupling environments for central DNA. Nearly two orders of magnitude extra SERS enhancement, more stable peak frequency and narrower peak full width at half maximum can therefore be obtained in DNA SERS spectra, which ensures highly stable and reproducible SERS signals in direct detection of both single strand DNA and double strand DNA utilizing the 3D SERS hotspot matrix. By normalizing the SERS spectra using phosphate backbone as internal standard, identification of single base variation in oligonucleotides, determination of DNA hybridization events and recognition of chemical modification on bases (hexanethiol‐capped at 5’ end) have been demonstrated experimentally. This proposed 3D SERS hotspot matrix opens a novel perspective in manipulating plasmonic nanoparticles to construct SERS platforms and would make the surface enhanced Raman spectroscopy a more practical and reliable tool in direct DNA detection.     

SERS in Salt Wells

We report herein a simple, inexpensive fabrication methodology of salt microwells, and define the utility of the latter as nanoparticle containers for highly sensitive surface‐enhanced Raman scattering (SERS) studies. AFM characterization of Ag and Au loaded salt microwells reveal the ability to contain favorable nanostructures such as nanoparticle dimers, which can significantly enhance the Raman intensity of molecules. By performing diffraction‐limited confocal Raman microscopy on salt microwells, we show high sensitivity and fidelity in the detection of dyes, peptides, and proteins, as a proof of our concept. The SERS limit of detection (accumulation time of 1 s) for rhodamine B and TAT contained in salt mircowells is 10 pM and 1 nM , respectively. The Raman characterization measurements of salt microwells with three different laser lines (532 nm, 632.81 nm, 785 nm) reveal low background intensity and high signal‐to‐noise ratio upon nanoparticle loading, which makes them suitable for enhanced Raman detection. SERS mapping of these sub‐femtoliter containers show spatial confinement of the relevant analyte to a few microns, which make them potential candidates for microscale bioreactors.     

Surface Enhanced Raman Spectroscopy of 4-Mercaptopyridine Molecules on Pb3O4 Nanoparticles

The surface enhanced Raman scattering(SERS)technique has been developed greatly since its first dis-covery nearly twenty-nine years ago.It is a very attrac-tive technique for the detection of various organic andinorganic molecules due to its sensitivity a…     

Detection of viral nucleoprotein binding to anti-influenza aptamers via SERS

A highly sensitive surface-enhanced Raman (SERS)-based method for detection of influenza viral nucleoproteins is described. The intrinsic SERS spectrum of the aptamer-nucleoprotein complex provides direct evidence of binding between a polyvalent anti-influenza aptamer and the nucleoproteins of three influenza strains.     

Ultrasensitive detection of malondialdehyde with surface-enhanced Raman spectroscopy

Malondialdehyde (MDA) is a biomarker of lipid peroxidation that has been widely associated with food rancidity as well as many human diseases. Most current MDA detection methods involve MDA reaction with thiobarbituric acid (TBA), followed by UV-visible and/or fluorescence detection of high-performance liquid chromatography (HPLC)-separated TBA-MDA. Herein, we report the first proof-of-concept study of surface-enhanced Raman detection of a TBA-MDA adduct using silver nanoparticles as the SERS substrate and the 632.8 nm HeNe laser as a Raman excitation source. Current SERS detection limit of TBA-MDA is 0.45 nM, ~100 times higher than the 36 nM fluorescence sensitivity recently reported with the HPLC-purified TBA-MDA. Molecular specificity of the SERS technique was studied by comparing the SERS spectrum of TBA-MDA with those acquired with TBA adducts of other TBA-reactive compounds (TBARCs) that includes formaldehyde, acetaldehyde, butyraldehyde, trans-2-hexenal, and pyrimidine. Compared to TBA and TBA adducts with those TBARCs, the SERS activity of TBA-MDA adduct is significantly higher. The possibility of direct SERS detection of TBA-MDA in a reaction mixture (without HPLC separation) has also been investigated.     

HA/Ag纳米复合材料的制备与性能

采用一锅热熔胶法制备出多孔花状羟基磷灰石/银(HA/Ag)纳米复合材料。通过检测罗丹明B揭示了HA/Ag作为SERS活性底物的独特拉曼增强效应,其检测极限为10~(-8) mol·L~(-1)。在检测中,改变拉曼激光强度,取点位置等手段能有效提高检测的灵敏度。此外,所制备的多孔纳米复合材料HA/Ag作为对硝基苯酚(4-NP)还原为对氨基苯酚(4-AP)反应的催化剂,可以大大缩短反应时间40 min。     

Silver nanoparticle aggregates on copper foil for reliable quantitative SERS analysis of polycyclic aromatic hydrocarbons with a portable Raman spectrometer

Silver nanoparticle aggregates were synthesized on copper foil, which was used for the surface-enhanced Raman spectroscopy (SERS) detection of polycyclic aromatic hydrocarbons (PAHs) with a portable Raman spectrometer. Silver nanoparticle aggregates were prepared by immersing copper foil in the solution of Sn(2+) and AgNO(3) in a cyclic fashion. A four-cycle process was selected for the following experiments due to its high enhancement and relatively convenient experimental procedure. The substrate has greater temporal stability under continuous laser radiation, good uniformity and reproducibility, which indicated that the substrate could provide reliable measurements. The relationship between SERS intensity and concentrations of PAHs was studied. Quantitative analysis of PAHs in aqueous solution was further performed based on the prepared substrate. The log-log plot of normalized SERS intensity to PAHs concentration exhibited a good linear relationship, with the detection limits in the range of 5-500 μg L(-1). Thus, due to the stability, reproducibility and quantitative results, the prepared substrate could be used as a potential SERS sensor for the analysis of environmental pollutants.     

Wide range temperature detection with hybrid nanoparticles traced by surface-enhanced Raman scattering

We report on the fabrication of a class of surface-enhanced Raman scattering(SERS)active thermometers,which consists of60 nm gold nanoparticles,encoded with Raman-active dyes,and a layer of thermoresponsive poly(N-isopropylacrylamide)(PNIPAM)brush with different chain lengths.These SERS-active nanoparticles can be optimized to maintain spectrally silent when staying as single particles in dispersion.Increasing temperature in a wide range from 25 to 55°C can reversibly induce the interparticle self-aggregation and turn on the SERS fingerprint signals with up to 58-fold of enhancement by taking advantage of the interparticle plasmonic coupling generated in the process of thermo-induced nanoparticles self-aggregation.Moreover,the most significative point is that these SERS probes could maintain their response to temperature and present all fingerprint signals in the presence of a colored complex.However,the UV-Vis spectra can distinguish the differences faintly and the solution color shows little change in such complex mixture.This proof-of-concept and Raman technique applied here allow for dynamic SERS platform for onsite temperature detection in a wide temperature range and offer unique advantages over other detection schemes.     

Large-area organization of pNIPAM-coated nanostars as SERS platforms for polycyclic aromatic hydrocarbons sensing in gas phase

Here, a new surface enhanced Raman spectroscopy (SERS) platform suitable for gas phase sensing based on the extended organization of poly-N-isopropylacrylamide (pNIPAM)-coated nanostars over large areas is presented. This system yields high and homogeneous SERS intensities, and simultaneously traps organic chemical agents as pollutants from the gas phase. pNIPAM-coated gold nanostars were organized into parallel linear arrays. The optical properties of the fabricated substrates are investigated, and applicability for advanced sensing is demonstrated through the detection in the gas phase of pyrene traces, a well-known polyaromatic hydrocarbon.     

Plasmonic rhenium trioxide self-assembled microtubes for highly sensitive,stable and reproducible surface-enhanced raman spectroscopy detection

Compared with noble metals, improving the sensitivity of semiconducting surface-enhanced Raman scattering (SERS) substrates is of great significance to their fundamental research and practical application of Raman spectroscopy. Herein, a simple chemical method is developed to synthesize a rhenium trioxide (ReO₃) microtubes assembled with highly crystalline nanoparticles. The ReO₃ microtubes show a strong and well-defined surface plasmon resonance (SPR) behavior in visible region, which is rare for non-noble metals. As a low-cost SERS substrate, the plasmonic ReO₃ microtubes exhibit a Raman enhancement factor of 8.9 × 10⁵ and a lowest detection limit of 1.0 × 10^?9 mol/L for phenolic pollutants. Moreover, these ReO₃ microtubule SERS substrates show excellent chemical stability and can resist the corrosion of strong acids and bases.     

利用去湿现象制备具有SERS活性的银纳米粒子图案

构建了具有表面增强拉曼散射(SERS)活性的二维有序环状与盘状的银纳米粒子结构, 利用CTAB包覆银纳米粒子的氯仿溶液直接在图案化的金基底上进行去湿, 当改变银纳米粒子的浓度时可以得到不同的图案. 利用原子力显微镜(AFM)对其结构进行了表征, 以4-巯基吡啶作为探针分子, 采用表面增强拉曼成像技术研究了这种基底的SERS活性, 这将为SERS的研究开拓新的领域.     

Quantitative SERS sensors for environmental analysis of naphthalene

In the investigation of chemical pollutants, such as PAHs (Polycyclic Aromatic Hydrocarbons) at low concentration in aqueous medium, Surface-Enhanced Raman Scattering (SERS) stands for an alternative to the inherent low cross-section of normal Raman scattering. Indeed, SERS is a very sensitive spectroscopic technique due to the excitation of the surface plasmon modes of the nanostructured metallic film. The surface of quartz substrates was coated with a hydrophobic film obtained by silanization and subsequently reacted with polystyrene (PS) beads coated with gold nanoparticles. The hydrophobic surface of the SERS substrates pre-concentrates non-polar molecules such as naphthalene. Under laser excitation, the SERS-active substrates allow the detection and the identification of the target molecules localized close to the gold nanoparticles. The morphology of the SERS substrates based on polystyrene beads surrounded by gold nanoparticles was characterized by scanning electron microscopy (SEM). Furthermore, the Raman fingerprint of the polystyrene stands for an internal spectral reference. To this extent, an innovative method to detect and to quantify organic molecules, as naphthalene in the range of 1 to 20 ppm, in aqueous media was carried out. Such SERS-active substrates tend towards an application as quantitative SERS sensors for the environmental analysis of naphthalene.     

Surface‐Enhanced Raman Scattering Based on Controllable‐Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection

Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene‐encapsulated CuNPs (G/CuNPs) hybrid system for surface‐enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal‐to‐noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10^?8 and 10^?10 M , respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates.     

Batch fabrication of disposable screen printed SERS arrays

A novel facile method of fabricating disposable and highly reproducible surface-enhanced Raman spectroscopy (SERS) arrays using screen printing was explored. The screen printing ink containing silver nanoparticles was prepared and printed on supporting materials by a screen printing process to fabricate SERS arrays (6 × 10 printed spots) in large batches. The fabrication conditions, SERS performance and application of these arrays were systematically investigated, and a detection limit of 1.6 × 10(-13) M for rhodamine 6G could be achieved. Moreover, the screen printed SERS arrays exhibited high reproducibility and stability, the spot-to-spot SERS signals showed that the intensity variation was less than 10% and SERS performance could be maintained over 12 weeks. Portable high-throughput analysis of biological samples was accomplished using these disposable screen printed SERS arrays.     

Metal-polymer nanocomposites for integrated microfluidic separations and surface enhanced Raman spectroscopic detection

The widespread development of microfluidics (microfluidics) has allowed the extension of efficient separations, fluid handling, and hyphenation with many detection modes to a small, portable, highly controllable physico-chemical platform. Surface enhanced Raman spectroscopy (SERS) offers the powerful advantage of obtaining vibrational spectroscopic information about analytes in an aqueous matrix with negligible background. The mating of electrophoretic separations with vibrational spectroscopy on a microfluidic device will allow the chromatographic efficiency of capillary electrophoresis (CE) with the unequivocal analyte "fingerprinting" capability of detailed structural information. By utilizing SERS as a means of detection, this work promises to yield redress for the hindrances of electrophoretic separations, including uncertainty in analyte band identification due to changing migration times as well as compromised detection sensitivity for non-fluorescent analytes. Our work represents the first steps toward developing CE-SERS on a microfluidic platform with a region of novel metal-pliable polymer nanocomposite SERS substrate fabricated directly into the device. The device fabrication material has been extensively employed by the microfluidics community for over five years. SERS detection can be achieved in real time or after the separations, with on-column laser-induced fluorescence employed as a secondary detection mode used for confirmation of efficiencies and band locations.