Permittivity enhancement of transparent poly(vinylidene fluoride) nanocomposite films by loading titania-coated barium titanate nanoparticles

Barium titanate (BT) nanoparticles are coated by titania and modified by fluoroalkylsilane. The BT nanoparticles are incorporated into polyvinylidene fluoride (PVDF) films to obtain highly dielectric and transparent nanocomposite films at low filler loadings. Incorporation of BT nanoparticles having average sizes of 12 and 22 nm is performed. Incorporation of BT nanoparticles enhances the permittivity of PVDF films. Higher transparency of nanocomposite films is achieved by incorporating 12-nm nanoparticles compared to that by 22-nm nanoparticles. The polarisation mechanism in the nanocomposite films is examined using the Vo–Shi model. The result indicates that even a slight increase in the thickness of titania-coating layer on the BT nanoparticles increase the permittivity of the nanocomposite films. Comparison of the measured and calculated permittivities showed that the incorporation of BT nanoparticles coated with titania provides a practical approach to create transparent nanocomposite films having high permittivity.

Open image in new window

Graphical abstract ?

     

Effect of gamma irradiation on hydrothermally synthesized barium titanate nanoparticles

The effect of gamma irradiation on hydrothermally synthesized BaTiO₃ nanoparticles has been investigated. Gamma irradiation was carried out at room temperature from 0, 50, 100, 150, 200?kGy to a maximum dose up to 250?kGy, source being ⁶⁰Co gamma radiations. The structure, size and chemical changes of the BaTiO₃ were studied using X-ray diffraction, Fourier-transform infrared spectrophotometry (FTIR) techniques and scanning electron microscopy (SEM). The optical band gap has been computed by UV–Visible spectroscopy data. From the results obtained, it is evident that the gamma irradiation increases the crystallinity, whereas the particle size of BaTiO₃ nanoparticles is altered. UV–Visible spectroscopy shows a noticeable change in the energy band gap due to gamma irradiation. Significant changes in anharmonicity constant computed using FTIR data due to irradiation has been observed. SEM shows the size and deviation from uniformity of particles.     

Structural and magnetic properties of single-crystalline Co-doped barium titanate nanoparticles

Undoped and Co-doped BaTiO₃ nanoparticles were synthesized by a one-step sol-precipitation method. For all the samples, X-ray diffraction showed characteristic diffraction lines for BaTiO₃ without the indication of secondary phases. High-resolution transition electron microscopy images showed that BaTiO₃ nanoparticles exhibit the nature of single-crystal. Magnetometry revealed that all the Co-doped BaTiO₃ samples show paramagnetic behaviors and Co ions in BaTiO₃ are present as isolated paramagnetic centers. This is contrasted to several reported cases of ferromagnetism in Co-doped BaTiO₃.     

Ion beam shaping of embedded metal nanoparticles by Si+ ion irradiation

Fine Co and Pt nanoparticles are nucleated when a silica sample is implanted with 400 keV Co⁺ and 1370 keV Pt⁺ ions. At the implanted range, Co and Pt react to form small Co _x Pt_(1?x) nanoparticles during Si⁺ ion irradiation at 300 °C. Thermal annealing of the pre-implanted silica substrate at 1000 °C results in the formation of spherical nanoparticles of various sizes. When irradiated with Si⁺ ions at 300 °C, particles in the size range of 5–17 nm undergo rod-like shape transformation with an elongation in the direction of the incident ion beam, while those particles in the size range of 17–26 nm turn into elliptical shape. Moreover, it is suspected that very big nanoparticles (size >26 nm) decrease in size, while small nanoparticles (size <5 nm) do not undergo any transformation. During Si⁺ ion irradiation, the crystalline nature of the nanoparticles is preserved. The results are discussed in the light of the thermal spike model.     

I-V and C-V characteristics of ceramic materials based on barium strontium titanate

The properties of ferroelectric ceramics based on barium strontium titanate and doped by admixtures with low permittivity and dielectric loss tangent are studied experimentally. These ceramics are viewed as a promising material for microwave devices applied in the acceleration technology. Ceramic samples the I-V characteristics of which contain long horizontal segments are found to have good insulating properties. Various conductivity mechanisms in these ceramics are discussed, and their effect on the amount and character of dielectric hysteresis in these samples is considered.     

Thermostable ferroelectric capacitors based on graded films of barium strontium titanate

Technical Physics - The influence of the pressure of working gas during the ion–plasma sputtering on properties of deposited ferroelectric barium strontium titanate coatings has been...     

Ion beam synthesis and carrier dynamics of ZnO nanoparticles embedded in a SiO2 matrix

Zinc oxide (ZnO) nanostructures have been synthesized by the implantation of ZnO molecular ions into SiO₂ followed by high temperature thermal annealing. 35 keV ZnO^? ions were implanted to a fluence of 5×10¹⁶ ions/cm² into SiO₂ at room temperature (RT). The implanted sample was annealed in an oxygen environment to allow the growth of ZnO precipitates. In the as-implanted sample, Zn nanoparticles up to 4.5 nm in diameter were observed and were distributed throughout the implanted depth in the SiO₂. The highest concentration of Zn from the implantation was at a depth of 25 nm. During annealing, Zn diffused into the substrate and combined with oxygen to form ZnO. ZnO nanostructures thus formed had diameters up to 8 nm, embedded in SiO₂. Donor-bound exciton (D, X), acceptor-bound exciton (A, X), and donor–acceptor-pair (DAP) transitions were observed in low temperature photoluminescence (PL) measurements on an annealed sample. RT-PL measurement showed band-edge emission in the ultraviolet region with a full width at half maximum of 121 meV. Time-resolved PL measurements performed at 4 K revealed an excitonic lifetime of 160 ps.     

Structure and optical and dielectric properties of barium titanate nanoparticles obtained by the mechanochemical method

The parameters of mechanochemical synthesis of barium titanate nanoparticles from barium titanyl oxalate and an oxide mixture are optimized. X-ray phase analysis, infrared and Raman scattering spectroscopy, differential scanning calorimetry, and dielectric spectroscopy are applied to demonstrate that the nanoparticles contain the cubic and tetragonal crystal lattice modifications. The impurity spectra for the particles obtained by the mechanochemical method from different initial substances are identical. The ferroelectric phase volume increases as hydroxyl groups are annealed from the crystal lattice and decreases upon annealing of metal atom vacancies.     

Structure and lattice dynamics of heterostructures based on bismuth ferrite and barium strontium titanate

The surface morphology, lattice parameters, and Raman spectra have been investigated at the stages of successive formation of a three-layer heterostructure consisting of epitaxial layers Ba_0.8Sr_0.2TiO₃ (BST) and (Bi_0.98Nd_0.02)FeO₃ (BNFO). The structural distortions arising from sequential deposition of BST/BNFO/BST layers of equal thickness have been determined using X-ray diffraction. It has been found that the degree of tetragonal distortion of the BST film on MgO increases after deposition of the BNFO film on the BST film surface, indicating the appearance of compressive stresses in BST. Based on the analysis of polarized Raman spectra, it has been shown that, in the BNFO layer, there is a new phase state which is not observed in the bulk samples. It has been demonstrated that the degree of tetragonality of the BST film grown on the BNFO surface is higher than that of the BST film grown directly on MgO.     

Investigation of thermal and dielectric properties of tin-doped piezoelectric ceramics based on barium titanate

The temperature dependences of the permittivity and pyroelectric coefficient of BaTi_{1 − x} Sn _x O₃ piezoelectric ceramics with a homogeneous composition and a tin concentration gradient have been studied. The thermal diffusion coefficient has been measured. The polarization profiles of the materials under study have been calculated by the thermal square wave method at a single frequency.     

Ion synthesis and laser annealing of Cu nanoparticles in Al2O3

Al₂O₃ samples with Cu nanoparticles, synthesised by ion implantation at 40 keV with a dose of 1×10¹⁷ ion/cm² and a current density from 2.5 to 12.5 μA/cm², were annealed using ten pulses from a KrF excimer laser with a single pulse fluence of 0.3 J/cm². The copper depth distribution, formation and modification of metal nanoparticles under the ion implantation and laser treatment were studied by Rutherford backscattering (RBS), energy dispersive X-ray (EDX) analysis, atomic force microscopy (AFM) and optical spectroscopy. It was found that laser annealing leads to a reduction in the nanoparticle size without diffusion of metal atoms into the bulk. The change in particle size and the possibility for oxidation of the copper particles are examined in the framework of Mie theory. Calculations presented show that under excimer laser treatment, Cu nanoparticles are more likely to be reduced in size than to undergo oxidation. Received: 19 April 2001 / Accepted: 7 November 2001 / Published online: 23 January 2002     

Effect of barium titanate nanoparticles of different particle sizes on electro-optic and dielectric properties of ferroelectric liquid crystal

A comparative study of two different particle sizes of ferroelectric barium titanate (BaTiO₃) nanoparticles as a dopant on the molecular structure, spontaneous polarization and dielectric behavior of a pure ferroelectric liquid crystal 6F₆T have been studied. It has been found that there is a remarkable decrease in isotropic temperature of both doped samples as compared to the pure 6F₆T sample. The spontaneous polarization also decreases for both the doped samples and the reduction is more pronounced in case of the dopant with large particle size. The dielectric spectroscopy confirms the presence of soft mode as well as Goldstone mode and also shows the decrease in the value of dielectric permittivity ?' as a function of frequency for both doped samples. The improvised properties of liquid crystal host doped with BaTiO₃ nanoparticles mainly depend upon the synthesis method of nanoparticles and also upon the particle size of dopant.     

Photo-chemical synthesis and deposition of noble metal nanoparticles

Highly dispersed nanoparticles of transition and noble metals are utilized for hydrocarbon reactions and rearrangements important to the chemical industry. The need to obtain 1 to 3 nm particles with narrow size distributions has prompted the development of alternative processing methods. In this paper, a novel, dry method to synthesize nanoparticles from a frozen salt solution is reported. Pd nanoparticles were synthesized by photo-chemical decomposition of palladium acetate (PdAc) within a host matrix of chloroform using an excimer laser operating at 248 nm. Frozen composite targets were ablated at fluences ranging from 0.25 J/cm² to 0.75 J/cm² at a processing pressure of 10 mTorr. The ejected nanoparticles were deposited on continuous carbon coated and lacey carbon transmission electron microscopy (TEM) grids at ambient temperature. Characterization was performed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDXS). High-resolution TEM analysis showed definitive evidence that the size distributions of the nanoparticles were narrow, exhibiting mean diameters ranging from 2.15 nm to 2.62 nm. PACS 81.15.Fg; 68.37.Lp; 81.07.Wx; 81.07.Bc; 81.10.Dn     

Magnetostrictive strains in weak band ferromagnets based on 3d metal monosilicides

The relative volume variables [ω(H, T)] caused by magnetostrictive strains in alloys of solid solutions of manganese, iron, and cobalt monosilicides are studied over a wide range of magnetic fields and temperatures. The results are discussed within the framework of spin-fluctuation theory. The observed anomalies in ω(H, T) are shown to be linked to the growth and saturation of the amplitude of the spin fluctuations. Ural Polytechnical Institute. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 102–107, February, 1993.     

Ion synthesis and optical properties of gold nanoparticles in an Al2O3 matrix

Single-crystal Al₂O₃(0001) and Al₂O₃(1120) substrates are implanted by 160-keV Au⁺ ions with doses from 10¹⁵ to 10¹⁷ cm^?2. Some of the implanted samples are air-annealed at 800–1200°C. The properties of the synthesized composite layers are studied by Rutherford backscattering and linear optical reflection measurements, and their nonlinear optical characteristics are examined by RZ-scanning using a picosecond Nd: YAG laser operating at a wavelength of 1064 nm. The Rutherford backscattering spectra indicate that the implanted impurity concentrates near the surface of the Al₂O₃. The formation of gold nanoparticles in the Al₂O₃ can be judged from the characteristic optical plasmon resonance band in the reflectance spectra of the samples irradiated to a dose higher than 6.0 × 10¹⁶ cm^?2. The synthesized particles are shown to be responsible for nonlinear optical refraction in the samples. The nonlinear refractive index, n ₂, and the real part of the third-order susceptibility, Rex⁽³⁾, of the composite layers are determined.     

Structure and lattice dynamics of heterostructures based on bismuth ferrite and barium strontium titanate on magnesium oxide substrates

Bismuth ferrite films doped with neodymium on MgO single-crystal substrates with an epitaxial barium strontium titanate thin (1–2 nm) sublayer have been prepared by rf sputtering of ceramic targets at an elevated oxygen partial pressure and at temperatures below the ferroelectric and magnetic transition temperatures. It has been revealed using X-ray diffraction and Raman scattering spectroscopy that, in these bismuth ferrite films, a new phase (not observed in bulk samples) is formed. The symmetry of this phase is monoclinic, the unit cell contains two formula units, and the spontaneous polarization vector deviates from the [111]_cub direction and can have different components along the x, y, and z axes.     

Magnetic properties of 3d transition metal monolayers on metal substrates

We report results of systematic calculations for magnetic properties of 3d transition metal monolayers on Pd(001) and Ag(001). We find large similarities to interactions of magnetic 3d impurities in the bulk. Therefore the overlayer results are supplemented with results for 3d dimers in Cu, Ag, and Pd. Differences between the two classes of systems are utilized to reveal the interaction within the overlayers and between overlayers and substrates. In virtually all cases we find both ferromagnetic and antiferromagnetic solutions, showing large magnetic moments and similar densities of states. From the trend of the calculations we conclude that V, Cr, and Mn overlayers favor the antiferromagnetic c(2×2) structure, while Ti, Fe, Co, and Ni prefer the ferromagnetic one.     

Optical properties of nanocomposites based on polymers and metal nanoparticles

The optical properties of nanocomposites of metal nanoparticles and polymers of two types have been studied. Gold and silver nanoparticles were obtained by laser ablation of corresponding metal targets in acetone and chloroform. The thus formed colloidal solutions were used to prepare nanocomposites of these nanoparticles in polymer matrices of polymethylmethacrylate (PMMA) and fluorine-containing polymer LF-32. The polymer matrix is found to promote aggregation of the metal nanoparticles under study into elongated chains. In turn, metal nanoparticles affect the polymer matrix. In the case of PMMA, suppression of the vibrational peaks of polymer in the low-frequency region of its Raman spectrum occurs. In the case of LF-32, gold and silver nanoparticles amplify the Raman signal of the polymer matrix. In addition, the Raman spectra of nanocomposites indicate aggregation of disordered carbon around the nanoparticles obtained by laser ablation in organic solvents. The possibilities of studying the ultrafast (about 1 ps) optical response of the nanocomposites obtained in order to use it in photonics elements are discussed.     

Design of antireflection composite coating based on metal nanoparticles

A design of ultrathin composite layer with metal nanoparticles on a dielectric surface is proposed for interference reduction of Fresnel reflection. The structural and material parameters of the antireflection composite are calculated within the Maxwell-Garnett effective-medium approximation. The results of the approximate analytical calculation are in good agreement with the exact numerical solution to the Maxwell equations.