Novel nanocomposite of nano fe(3)o(4) and polylactide nanofibers for application in drug uptake and induction of cell death of leukemia cancer cells

Novel nanocomposites of polylactide (PLA) nanofibers and tetraheptylammonium-capped Fe3O4 magnetic nanoparticles have been prepared and utilized to realize the efficient accumulation of anticancer drug daunorubicin in target cancer cells. The observations of optical microscopy and confocal fluorescence microscopy indicate that the PLA nanofibers and Fe3O4 nanoparticles may contribute to their beneficial effects on intracellular drug uptake of leukemia K562 cell lines in which the efficiently enhanced accumulation of anticancer drug daunorubicin on the membrane of cancer cells could be observed. Meanwhile, the electrochemical detection and the microculture tetrazolium studies were also explored to probe the effect of the relevant nanomaterials on the drug uptake of cancer cells. The results illustrate that the nanocomposites could effectively facilitate the interaction of daunorubicin with leukemia cells and remarkably enhance the permeation and drug uptake of anticancer agents in the cancer cells, which could readily lead to the induction of the cell death of leukemia cells. This observation suggests a new perspective for the targeted therapeutic approaches of cancers.     

Real-time detection of the interaction between anticancer drug daunorubicin and cancer cells by Au-MCNT nanocomposites modified electrodes

In this study,we have prepared the blending of gold nanoparticles-multiwalled nanotubes (Au-MCNTs) and then applied the new nanocomposites to modify the glassy carbon electrode (GCE) for highly sensitive detection of the interaction between anticancer drug daunorubicin (DNR) and cancer cells. Electrochemical analysis indicates that the Au-MCNT modified GCE shows high sensitivity and could track the real time response of cancer cells under DNR treatments. Therefore,this new nano-interface and Au-MCNT modifie...     

Green synthesis of polymer nanofibers and their composites as flame‐retardant materials for polymer nanocomposites

Polyaniline nanofibers and their composites with carbon nanotubes were developed as an effective flame‐retardant material using a facile green method. Polyaniline nanofibers were used as a smart flame‐retardant for acrylonitrile–butadiene–styrene polymer. The polyaniline nanofibers were dispersed in polymer matrix forming well‐dispersed polymer nanocomposites. Effect of polyaniline nanofiber mass ratio on the polymer nanocomposite properties was studied. Polyaniline nanofiber composites with carbon nanotubes were also dispersed in polymer matrix. The thermal stability and flammability properties of the polymer nanocomposites were investigated. The rate of burning of polymer nanocomposites achieved 82.5% reduction (7.32 mm/min) compared with virgin polymer (42.5 mm/min). The reduction in peak heat release rate and total heat release of the polymer nanocomposites containing nanofibers achieved 74 and 34%, respectively. Interestingly, the average mass loss rate was significantly reduced by 58% and the emission of carbon monoxide and carbon dioxide gases were suppressed by 20 and 47%, respectively. The effect of polyaniline nanofibers composites on the flammability of polymer nanocomposites was also studied. Polyaniline nanofibers and their composites were characterized using Fourier transform infrared spectroscopy and transmission and scanning electron microscopy. The dispersion of polyaniline nanofibers in polymer nanocomposites was characterized using transmission electron microscopy. The different polymer nanocomposites were characterized using thermogravimetric analysis, UL94 flame chamber, and cone calorimeter tests. Copyright © 2016 John Wiley & Sons, Ltd.     

PEO/P(VdF-HFP) blend based Li+ ion-conducting composite polymer electrolytes dispersed with dedoped (insulating) polyaniline nanofibers

Composite polymer electrolyte membranes composed of poly(ethylene oxide) (PEO), poly(vinylidene fluoride-hexafluoropropylene) {P(VdF-HFP)} blends, dedoped (insulating) polyaniline (PAni) nanofibers, and LiClO₄ as salt have been synthesized with varying fraction of dedoped PAni nanofibers (from 2 to 10 wt.%). The ionic conductivity of PEO–P(VdF-HFP)–LiClO₄ electrolyte system increases with increase in the fraction of dedoped polyaniline nanofibers. This could be attributed to the incorporation of nanofibers (aspect ratio >50), which may provide high ion conducting path along the interface due to Lewis acid–base interactions between Li⁺ ions and lone pair of electrons of nitrogen atom of polyaniline. However, at higher fraction (>6 wt.%), the nanofibers get phase separated from the polymer matrix and form domain-like structures, which may act as physical barrier to the conduction of Li⁺ ions resulting in decreased ionic conductivity. Electrochemical potential window and interfacial stability of nanofibers dispersed polymer electrolyte membranes are also better than that of nanofibers free membranes.     

Electrospun nanofibers for drug delivery applications: Methods and mechanism

Electrospinning procedures such as blend electrospinning, coaxial electrospinning, and emulsion electrospinning have been used for the fabrication of electrospun nanofibers (ENFs) for biomedical applications. These ENFs are attracted great interest especially in drug delivery applications due to their small size, high surface area-to-volume, and porosity. The aim of this review is to focus on the controlled release mechanism among the different electrospinning methods, and the selectivity of hydrophilic, water-soluble polymers as a carrier for drug. The mechanism for the drug delivery depends mainly on the method of drug loading, polymeric interactions, and the nature of polymer swelling, erosion, or degradation. This review compressed on the literature survey about the fabrication of nanofibers by different electrospinning methods, factors affecting the nanofiber morphologies, selectivity of polymeric blends for successful controlled release behavior, and the mechanism involved in the drug release steps.     

Electro-responsive transdermal drug delivery behavior of PVA/PAA/MWCNT nanofibers

The electro-responsive transdermal drug delivery system was prepared by electrospinning of poly(vinyl alcohol)/poly(acrylic acid)/multi-walled carbon nanotubes (MWCNTs) nanocomposites. The surface modification of MWCNTs was carried out by oxyfluorination to introduce the functional groups on the hydrophobic MWCNTs. The dispersion of MWCNTs and the compatibility with polymer matrices were improved by oxyfluorination. The MWCNT content and oxyfluorination condition played important roles in the swelling and drug release characteristics of nanofibers. The conductivity of nanofibers increased by increasing the content of MWCNTs and performing oxyfluorination with higher oxygen content. Uniform distribution of the oxyfluorinated MWCNTs in the nanofibers was crucial to the electro-responsive swelling and drug releasing behaviors of nanofibers.     

Synergistic cytotoxic effect of different sized ZnO nanoparticles and daunorubicin against leukemia cancer cells under UV irradiation

Failure of chemotherapy to the malignant tumor is usually induced by multidrug resistance (MDR). The development of anti-MDR agents for efficient drug delivery is of great importance in cancer therapy. Recent reports have demonstrated that some anticancer drugs could be readily self-assembled on some biocompatible nanomaterials covalently or non-covalently, which could effectively afford the sustained drug delivery for the target cancer cells and reduce the relevant toxicity towards normal cells and tissues. Thus these biocompatible nanomaterials may play an important role in the relevant biological and biomedical system. In this paper, we have explored the cytotoxic effect of anticancer drug daunorubicin on leukemia cancer cells in the absence and presence of different sized ZnO nanoparticles via fluorescence microscopy, UV-Vis absorption spectroscopy, electrochemical analysis as well as MTT assay. Meanwhile, the cytotoxicity suppression of daunorubicin together with different sized ZnO nanoparticles in the absence and presence of UV irradiation on leukemia cancer cells were also investigated using MTT assay. The results indicate that the combination of the different sized ZnO nanoparticles and daunorubicin under UV irradiation could have synergistic cytotoxic effect on leukemia cancer cells, indicating the great potential of ZnO nanoparticles in relevant clinical and biomedical applications.     

Synthesis of TiO(2)-PMMA nanocomposite: using methacrylic acid as a coupling agent

Inorganic-polymer nanocomposites are of significant interest for emerging materials due to their improved properties and unique combination of properties. Methacrylic acid (MA), a functionalization agent that can chemically link TiO2 nanomaterials (n-TiO2) and polymer matrix, was used to modify the surface of n-TiO2 using a Ti-carboxylic coordination bond. Then, the double bond in MA was copolymerized with methyl methacrylate (MMA) to form a n-TiO2-PMMA nanocomposite. The resulting n-TiO2-PMMA nanocomposite materials were characterized by using thermal analysis, electron microscopy, and elemental analysis. The dynamic mechanical properties (Young's and shear modulus) were measured using an ultrasonic pulse technique. The electron microscopy results showed a good distribution of the nanofillers in the polymer matrix. The glass transition temperature, thermal degradation temperature, and dynamic elastic moduli of the nanocomposites were shown to increase with an increase in the weight percentage of nanofibers in the composite. The resulting nanocomposites exhibited improved elastic properties and have potential application in dental composites and bone cements.     

An Overview of Linear Dielectric Polymers and Their Nanocomposites for Energy Storage

As one of the most important energy storage devices, dielectric capacitors have attracted increasing attention because of their ultrahigh power density, which allows them to play a critical role in many high-power electrical systems. To date, four typical dielectric materials have been widely studied, including ferroelectrics, relaxor ferroelectrics, anti-ferroelectrics, and linear dielectrics. Among these materials, linear dielectric polymers are attractive due to their significant advantages in breakdown strength and efficiency. However, the practical application of linear dielectrics is usually severely hindered by their low energy density, which is caused by their relatively low dielectric constant. This review summarizes some typical studies on linear dielectric polymers and their nanocomposites, including linear dielectric polymer blends, ferroelectric/linear dielectric polymer blends, and linear polymer nanocomposites with various nanofillers. Moreover, through a detailed analysis of this research, we summarize several existing challenges and future perspectives in the research area of linear dielectric polymers, which may propel the development of linear dielectric polymers and realize their practical application.     

纳米金-多壁碳纳米管复合物修饰电极对柔红霉素作用癌细胞的实时检测

本文通过制备纳米金-多壁碳纳米管复合物(Au-MCNT)修饰玻碳电极,建立了抗癌药物柔红霉素(DNR)作用癌细胞的高灵敏检测方法,研究并追踪了DNR与癌细胞相互作用过程中细胞对DNR的电化学实时响应.结果表明,Au-MCNT修饰电极能实现抗癌药物DNR作用癌细胞的高灵敏实时检测.基于该纳米复合材料的电化学药物传感分析方法可作为抗癌研究中一种方便、快捷、灵敏的实时检测手段,在生物医学等领域具有良好的应用前景.     

Desorption-limited mechanism of release from polymer nanofibers

This work examines the release of a model water-soluble compound from electrospun polymer nanofiber assemblies. Such release attracts attention in relation to biomedical applications, such as controlled drug delivery. It is also important for stem cell attachment and differentiation on biocompatible electrospun nanofiber scaffolds containing growth factors, which have been encapsulated by means of electrospinning. Typically, the release mechanism has been attributed to solid-state diffusion of the encapsulated compound from the fibers into the surrounding aqueous bath. Under this assumption, a 100% release of the encapsulated compound is expected in a certain (long) time. The present work focuses on certain cases where complete release does not happen, which suggests that solid-state diffusion may not be the primary mechanism at play. We show that in such cases the release rate can be explained by desorption of the embedded compound from nanopores in the fibers or from the outer surface of the fibers in contact with the water bath. After release, the water-soluble compound rapidly diffuses in water, whereas the release rate is determined by the limiting desorption stage. A model system of Rhodamine 610 chloride fluorescent dye embedded in electrospun monolithic poly(methylmethacrylate) (PMMA) or poly(caprolactone) (PCL) nanofibers, in nanofibers electrospun from PMMA/PCL blends, or in core-shell PMMA/PCL nanofibers is studied. Both the experimental results and theory point at the above mentioned desorption-related mechanism, and the predicted characteristic time, release rate, and effective diffusion coefficient agree fairly well with the experimental data. A practically important outcome of this surface release mechanism is that only the compound on the fiber and pore surfaces can be released, whereas the material encapsulated in the bulk cannot be freed within the time scales characteristic of the present experiments (days to months). Consequently, in such cases, complete release is impossible. We also demonstrate how the release rate can be manipulated by the polymer content and molecular weight affecting nanoporosity and the desorption enthalpy, as well as by the nanofiber structure (monolithic fibers, fibers from polymer blends, and core-shell fibers). In particular, it is shown that, by manipulating the above parameters, release times from tens of hours to months can be attained.     

聚乙二醇/功能化石墨烯层状纳米复合材料热稳定性的提高

通过溶液共混技术成功制备了一系列聚乙二醇功能化石墨烯(GO-PEG)填充的聚乙二醇4000(PEG4000)基纳米复合材料.利用红外(FT-IR)、X衍射(XRD)、扫描电镜(SEM)、热重(TG)及玻璃化转变温度(Tg)等表征手段详细研究了复合材料的结构和热性能.结果表明:GO-PEG可均匀分散在聚合物基体中,纳米复合材料呈层状结构;组分间的较强界面相互作用协同增强了纳米复合材料的热稳定性能.最终提出了层状纳米复合材料的形成过程及机理.     

Structure–property relationships of polymer blend/clay nanocomposites: Compatibilized and noncompatibilized polystyrene/propylene/clay

Polymer blends represent an important class of materials in engineering applications. The incorporation of clay nanofiller may provide new opportunities for this type of materials to enhance their applications. This article reports on the effects of clay on the structure and properties of compatibilized and noncompatibilized polymer blends and presents a detailed process for quantitative analysis of the elastic moduli of polymer blend/clay nanocomposites, based on immiscible polystyrene/polypropylene (PS/PP) blends with or without maleated PP as the compatibilizer. The results show that in the noncompatibilized PS/PP/clay nanocomposite clay locates solely in the PS phase, whereas in the compatibilized nanocomposite clay disperses in both phases. The addition of clay to both polymer blends reduces the domain size significantly, modifies the crystallinity and improves the stiffness. The Mori–Tanaka and Christensen's models offer a reasonably good prediction of the elastic moduli of both types of nanocomposites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Modeling of Polymer Structure and Conformations in Polymer Nanocomposites from Atomistic to Mesoscale: A Review

Over the past two decades polymer nanocomposites have received tremendous interest from industry and academia due to their advanced properties comparative to polymer blends. Many computational studies have revealed that the macroscopic properties of polymer nanocomposites depend strongly on the microscopic polymer structure and conformations. In this article we review computer simulation studies of the fundamental problem of homopolymers structure and dimensions in nanocomposites containing bare or grafted spherical or rod nanoparticles. Experimentally, there is controversy over whether the addition of nanoparticles in a polymer matrix can perturb the polymer chains.     

Chemical‐Bonding‐Directed Hierarchical Assembly of Nanoribbon‐Shaped Nanocomposites of Gold Nanorods and Poly(3‐hexylthiophene)

Nanoribbon‐shaped nanocomposites composed of conjugated polymer poly(3‐hexylthiophene) (P3HT) nanoribbons and plasmonic gold nanorods (AuNRs) were crafted by a co‐assembly of thiol‐terminated P3HT (P3HT‐SH) nanofibers with dodecanethiol‐coated AuNRs (AuNRs‐DDT). First, P3HT‐SH nanofibers were formed due to interchain π–π stacking. Upon the addition of AuNRs‐DDT, P3HT‐SH nanofibers were transformed into nanoribbons decorated with the aligned AuNRs on the surface (i.e., nanoribbon‐like P3HT/AuNRs nanocomposites). Depending on the surface coverage of the P3HT nanoribbons by AuNRs, these hierarchically assembled nanocomposites exhibited broadened and red‐shifted absorption bands of AuNRs in nIR region due to the plasmon coupling of adjacent aligned AuNRs and displayed quenched photoluminescence of P3HT. Such conjugated polymer/plasmonic nanorod nanocomposites may find applications in fields, such as building blocks for complex superstructures, optical biosensors, and optoelectronic devices.     

基于静电纺丝技术的多级结构聚合物纳米纤维复合材料的研究进展

静电纺丝技术是目前制备纳米纤维最重要的方法之一,以其制备的纤维具有直径可控、比表面积大、孔隙率高等优点,因而被广泛应用于过滤、催化、传感器及生物医学等众多领域.以静电纺丝纤维为模板可进一步构建多级结构的功能性聚合物纳米纤维复合材料,拓宽其应用范围.本文着重概述了近年来基于静电纺丝技术的简单共混型、核壳结构及多级结构的聚合物纳米纤维复合材料的制备、结构及性能,并展望了其应用研究前景.     

From monomeric nanofibers to PbS nanoparticles/polymer composite nanofibers through the combined use of gamma-irradiation and gas/solid reaction

Organic metal-salt (lead dimethacrylate (Pb(MA)2)) nanofibers are prepared, and these Pb(MA)2 monomeric nanofibers are successfully converted into PbS nanoparticles/polymer composite nanofibers through the combined use of gamma-irradiated polymerization and gas/solid reaction. The resulting composite nanofibers have excellent thermal and chemical stability, and the PbS nanoparticles (with diameters of about 4 nm) are well dispersed in the polymer-fiber matrices. This approach could also be extended to methacrylates containing other metal ions. We anticipate that this method would provide a platform for the fabrication of diverse and multifunctional polymer nanocomposite fibers, which would have potential applications in fabricating devices with optical, electric, and magnetic properties.     

Electrospinning fabrication of partially crystalline bisphenol A polycarbonate nanofibers: Effects on conformation, crystallinity, and mechanical properties

The application of an electrostatic and centrifugal field (1800 rpm) in a novel electrospinning process was shown to improve the degree of uniaxial alignment in polymer nanofibers and to enhance orientational order in polymer chains, producing bisphenol A polycarbonate (BPAPC) nanofibers with superior mechanical properties. High-speed videography showed that the additional centrifugal field effectively removed electrical bending instability and promoted molecular orientation during the electrospinning process. Infrared spectroscopic (IR) characterization revealed that the fraction of trans–trans conformers in BPAPC nanofibers reached 67% under optimal electrospinning conditions (25 kV and 1800 rpm at 25 °C). Modulated differential scanning calorimetry (MDSC) and wide-angle X-ray diffraction (WXRD) assays showed that a degree of crystallinity of 6.5% could be achieved. Moreover, two crystal phases at angles of 2θ = 17.3° and 21.9° were produced in BPAPC nanofibers. The elastic modulus of BPAPC nanofibers with a crystallinity of 6.5% was 7.11 and 5.13 GPa, as measured via atomic force microscopy (AFM) and nanoindenter (NI) experiments, respectively. These results demonstrated that the mechanical behavior of BPAPC nanofibers could be improved by conducting the proposed electrospinning technique. Moreover, BPAPC nanofibers produced through the proposed method could be potentially applied for the reinforcement of composites.     

Design and fabrication of thermally stable nanoparticles for well-defined nanocomposites

The nanocomposites consisted of polymer and nanoparticles (NPs) have been regarded as one of core materials in the nanotechnology. From the practical viewpoint, the heat treatment is often required in many nanocomposite fabrication processes. However, some NPs such as gold NPs exhibit the low thermal stability due to the dissociation of ligands from the nanoparticle surface at elevated temperature, limiting their use in many applications. Herein, we provide an overview of the recent efforts in strategies for the design and fabrication of inorganic NPs which have enhanced thermal stability. The recent investigation on the phase behavior of thermally stable NPs within the polymer matrices (polymer blends and block copolymer), morphologies of nanocomposites induced by NPs, and examples of their applications are also discussed. These approaches may provide useful strategy to employ the NPs for the fabrication of nanocomposites in diverse applications especially where heat treatment are required. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Reactive Polymer as a Versatile Toolbox for Construction of Multifunctional Superparamagnetic Nanocomposites

The development of magnetic nanoparticles with multiple functions has been an ever‐growing field because of their diverse applications in drug delivery, biosensing, cell labeling, and so on. In this study, a facile method was developed to construct multifunctional magnetic nanocomposites. The approach is based on the use of poly(glycidyl methacrylate), PGMA, with numerous epoxy groups as reactive polymer to combine with fluorescent dye, the surface of magnetic nanoparticles, and targeting ligands directly without expatiatory functionality design. The resultant nanocomposites with good superparamagnetic and fluorescent properties could be exploited for bioimaging. Moreover, after conjugation with a model protein, namely, transferrin, which specifically targets cells overexpressing transferrin receptors, the nanocomposites could be used selectively to recognize Hela cells in comparison with nonconjugated ones. These results indicate that the newly designed magnetic nanocomposites with PGMA as functional polymer could serve as a novel versatile platform to conjugate with various molecules for construction of diverse multifunctional magnetic nanocomposites to meet different requirements and potential uses in nanomedicine and biological chemistry.