Rapid analysis of unsaturated acidic xylooligosaccharides from kraft pulps using capillary zone electrophoresis

Several acidic xylooligosaccharides containing unsaturated “hexenuronic acid” units, i.e. 4-deoxy-L -threo-hex-4-enopyranosy-lurinic acid (4-ΔU) units, were separated as their alditol derivatives by capillary zone electrophoriesis in 438 mM borate buffer (pH 10.3) and were detected selectively at the μM level on-column UV detection at 232 nm. These acidic oligosaccharides were obtained from birch and pine kraft pulps on enzymatic hydrolysis with endoxylanases and subsequent treatment with other Trichoderma reesei enzymes. Under the conditions empolyed, acidic 4-ΔU-containing xylooligosaccharides with a molecular size renging from trisaccharides up to nonasaccharides could be separated. Oligosaccharides with higher molecular mass were detected first. Two 4-ΔU-xylotetraose isomers, with the 4-ΔU-group linked to different xylose units in the iligosaccharide backbone, could be resolved from each other with a resolution of about 1. By using a disaccharide (4-ΔU α-(1 → 4) linked to N-acetyl glucosamine) as a model compound the minimum detectable concentration was determined as 10 μM.     

Determination of aristolochic acid by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis (CZE) method for the determination of aristolochic acid (AA) in dietary supplements and selected herbs is described. A clear separation of AA from other sample constituents was achieved within 5 minutes without any sample clean up. A mixture of 20 mM-morpholinethanesulphonic acid+10 mM-BisTrisPropane+0.2% hydroxyethylcelullose in 10% methanol serves as a background electrolyte. The linearity, accuracy, intra-assay and detection limit of the developed method are 200–6000 ng/mL, 95–103%, 3.5%, and 50 ng/ml, respectively. Ease of use, sufficient sensitivity and low running cost are the most important attributes of the CZE method. The proposed CZE method was compared with HPLC.     

Rapid analysis of alkylphosphonate drugs by capillary zone electrophoresis using indirect ultraviolet detection

A rapid capillary electrophoretic method for the analysis of three alkylphosphonate drugs (i.e. fosfomycin disodium (FOS), clodronate disodium (CLO) and alendronate sodium (ALN)) was developed by using multiple probe BGE and indirect UV detection. BGE containing 30 mM benzoic acid, 5 mM salicylic acid and 0.5 mM CTAB (pH 3.8), temperature of 30°C, applied voltage of ?30 kV and detection at 220 nm provided baseline separation of all analytes (resolution (R)>2.2) in 3.2 min. EOF reversal by addition of CTAB and negative voltage polarity leading to the co‐EOF flow and short analysis time. Two probe BGE greatly improved peak symmetry. The method showed good linearity (r²>0.999 in ranges of 20–1000 μg/mL for FOS, 100–1000 μg/mL for CLO and 100–750 μg/mL for ALN) repeatablitiy (RSD<2.15%), recovery (99.3–101.1%) and sensitivity (LOD<50 μg/mL). Freshly prepared BGE and sample solutions are essential for the method precision and accuracy. This new method can be utilized for routine analysis of FOS, CLO and ALN in dosage forms because of its efficiency, reliability, speed and simplicity.     

Peptide nucleic acid and amino acid modified peptide nucleic acid analysis by capillary zone electrophoresis

A rapid, high resolution, and low sample consumption CZE method is developed for peptide nucleic acid (PNA) analysis for the first time. 30% v/v acetonitrile in PNA sample and 20% v/v acetonitrile in 50 mM borax‐boric acid (pH 8.7) as BGE were employed after optimization. The calibration curves were linear for PNA concentration ranging from 1 to 50 μmol/L. LOD and LOQ of PNA were 0.2 and 1.0 μmol/L, respectively. Since the commercially available reagent gives rise to huge PNA peak and an apparent impurity peak, the purity of PNA was evaluated to be about 81.4% by CZE method, obviously lower than the supplier's purity value of 99.9% evaluated by RP–HPLC, and also lower than 94.8% determined with RP–HPLC by our research group. The CZE method takes only 5 min, needs only 90 nL PNA, much less than 20 min and 20 μL PNA in RP–HPLC method. Moreover, the CZE method is applicable for the analysis of glutamic acid modified and lysine modified PNAs, they show different migration time with their corresponding complementary PNAs. Our results show CZE provides a new choice for PNA and modified PNA analysis, also their purity or quality evaluation.     

Rapid analysis of antimicrobial metabolites monoacetylphloroglucinol and 2,4-diacetylphloroglucinol using capillary zone electrophoresis

A rapid capillary electrophoretic (CE) method was developed for the determination of phloroglucinol compounds, monoacetylphloroglucinol (MAPG) and 2,4-diacetylphloroglucinol (DAPG), in microbial supernatants of Pseudomonas fluorescens F113 over a 24-h growth cycle. Prior to electrophoretic separation, solid-phase extraction of supernatant samples on octadecylsilica for the purpose of sample cleanup is recommended. The optimum electrophoretic conditions were found to be 25 mM sodium tetraborate running buffer at pH 9.3, temperature at 25 degrees C with an applied voltage of 25 kV. The capillary was an Agilent fused-silica capillary of total length 33 cm x 50 microm inner diameter, 375 microm outer diameter, with effective length 24.5 cm. While MAPG and DAPG were monitored at selected wavelengths in the range of 214-320 nm, analysis at 214 nm was used and a CE separation time of less than 2 min was achieved. A partial method validation study was performed in accordance with European Agency for Evaluation of Medicinal Products (EMEA) guidelines. The method displayed linearity over the investigated range of 10-200 microg/mL, with limits of detection of 1.2 microg/mL for MAPG and 1.3 microg/mL for DAPG.     

Separation and direct UV detection of lanthanides complexed with pyridine-2-carboxylic acid by capillary electrophoresis

Separation and detection of lanthanides by capillary zone electrophoresis in the presence of pyridine-2-carboxylic acid (picolinic acid) as UV-absorbing complexing agent were investigated. The resolution of partially complexed positively charged complexes is improved by using two buffer ligands competing with picolinic acid for metal ions. When hydroxyisobutyric acid (HIBA) and formic acid are used together as competing ligands, this provides complete separation of all 14 lanthanides with good peak shapes. An on-column separation of 14 lanthanides was achieved in only 9 min using 0.8 mmol/l picolinic acid, 10 mmol/l HIBA and 25 mmol/l formic acid at pH 4.7. Determination of lanthanide complexes was performed by direct detection at 210 nm. Detection limits (signal-to-noise ratio=3) are ca. 0.53-0.96 microg/ml.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

Rapid quantitative capillary zone electrophoresis method for monitoring the micro-heterogeneity of an intact recombinant glycoprotein

A simple high-resolution capillary zone electrophoresis (CZE) method capable of rapidly assessing the micro-heterogeneity of a 24 kDa molecular weight glycoprotein, has been developed. Separation is carried out using a bare silica capillary at a pH of 2.5 in a commercially available electrophoresis buffer system composed of triethanolamine and phosphoric acid. Over 30 peaks were detected within a run time of 15 min using a 27 cm capillary and approximately 60 peaks were detected using a 77 cm capillary. Although most of the peaks arise from differences in the oligosaccharide structures present on the one glycosylation site on this molecule, other forms of micro-heterogeneity due to the presence of the nonglycosylated form of this glycoprotein and various types of chemical degradation, e.g., deamidation, are also responsible for the multitude of peaks observed. Although the exact chemical identity of each peak in the resulting electropherogram of this glycoprotein is not known, useful information can be obtained for assessing comparability, stability, and batch consistency. Factors impacting the resolution, precision, accuracy, and robustness of the assay are also discussed along with inherent advantages and limitations associated with measuring the micro-heterogeneity of intact glycoproteins.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

Determination of domoic acid by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis--capillary zone electrophoresis (cITP-CZE) method for the determination of domoic acid in shellfish and algae is described. The optimised cITP-CZE electrolyte system was 10 mM HCl + 20 mM beta-alanine (BALA) + 0.05% hydroxyethylcellulose (leading electrolyte), 5 mM caproic acid (terminating electrolyte) and 20 mM caproic acid + 20 mM BALA + 0.1% HPMC (background electrolyte). A clear separation of the domoic acid from the other components of methanolic sample extract was achieved within 25 min. Method characteristics, i.e., linearity (0-200 microg/l), accuracy (recovery 101+/-3%), intra-assay repeatability (2.4%) and detection limit (1.5 microg/l) were determined. Speed of analysis, low laboriousness, high sensitivity and low running cost are the typical attributes of the cITP-CZE method. Developed method was successfully applied to analysis of shellfish samples and food supplements containing algae extract.     

Rapid determination of momordicoside in Momoradica charantia seeds by capillary zone electrophoresis

A novel method is described for the rapid determination of momordicoside in bitter melon based on capillary zone electrophoresis. Electrophoresis conditions, including the pH value and concentration of running buffer, as well as the voltage applied were optimized. The contents of momordicoside in 52 samples originating from different agricultural areas in China were determined. The results showed an excellent linearity in the concentration range of 0.50–2.51 mg mL^?1 for all samples (R ²?>?0.9999), with a recovery of 96.0% and a relative standard deviation of 1.4%. The method is characterized by rapidity, accuracy, the need for small samples only, and is suitable for analyses at a large scale.     

Fenofibrate and fenofibric acid analysis by capillary electrophoresis

A capillary electrophoresis method has been developed to measure fenofibrate in capsules based on micellar electrokinetic capillary chromatography with detection at 280 nm using a borate buffer containing sodium dodecyl sulfate (SDS). However, the metabolite of this drug (fenofibric acid) in serum and whole blood was analyzed by capillary zone electrophoresis (CZE) in a borate-carbonate buffer using acetonitrile stacking. The analysis is rapid, < 7 min with no interferences. Incubation of fenofibrate in whole blood caused hydrolysis of the ester bond with the release of fenofibric acid.     

高效毛细管区带电泳法快速测定尿液中的肌酐

建立了一种快速测定尿中肌酐浓度的高效毛细管电泳方法。利用非涂层石英毛细管(64.5 cm×50μm i.d),以pH 2.5,0.1 mmol/L H3PO4作为电泳缓冲液,检测波长191 nm,用0.05 Pa压力进样4 s,在电压16 kV快速分离尿液中的肌酐,采用外标法定量。肌酐的迁移时间约为5.5 min,肌酐浓度在34.5~8840μmol/L范围内呈良好的线性(r2=0.999)。平均日内精密度为2.5%,日间精密度为3.0%。回收率94.1%~99.0%。与全自动生化分析仪碱性苦味酸速率法相比有良好的相关性(r=0.990,n=56)。高效毛细管电泳法测定尿肌酐可应用于临床样品的检测。     

毛细管区带电泳法快速测定人血血清蛋白

人血血清蛋白电泳分析是临床上诊断多种疾病的常用生化指标 ,也是临床实验室检查的常规项目。目前采用的方法有醋酸纤维薄膜电泳和琼脂糖电泳 ,尤以前者为主。由于醋酸纤维薄膜电泳法操作繁琐 ,每一步骤均需手工完成 ,影响因素较多 ,初学者往往不易掌握 ,且测定的重复性较差。高效毛细管电泳是近几年来迅速发展起来的分离分析技术 [1,2 ]。用该技术分析人血清蛋白国内外虽有报道 ,但由于人血清中蛋白质组分甚为复杂 ,采用不同的分离方法和条件可出现不同数量的组分峰 ( 6、7个甚至 1 0个以上组分 ) ,与目前临床上常用的醋酸纤维薄膜电泳图谱…     

Rapid analysis of spent fixing solutions by capillary electrophoresis

Summary A capillary electrophoretic method for the determination of thiosulphate, bromide, Fe(III)-EDTA chelate and free EDTA in spent fixing solutions has been developed. Free EDTA was complexed with Ni(II) ions prior to analysis. The optimised separations were carried out in a fused silica capillary (57 cm×75 μm I.D.) filled with a borate buffer (100mmol L⁻¹ borate, 0.2 mmol L⁻¹ tetradecyltrimethylammonium hydroxide, pH 8.5; applied voltage, −30kV) using direct UV detection at 214 nm. All four anions were well separated in less than 4 min. The method was applied to the rapid monitoring of spent fixing solutions.     

Determination of cinnamic acid by capillary zone electrophoresis using ion-pair reagents

The behavior of cinnamic acid in the presence of ion-pair reagents has been studied. Conditions have been chosen for the selective determination of cinnamic acid by capillary zone electrophoresis with normal and reversed polarity and spectrophotometric detection; the results have been applied for the analysis of drinks and milk hydrolysates. The influence of surfactants (sodium dodecyl sulfate, sodium octyl sulfonate) present in the buffer electrolyte on the efficiency of cinnamic acid determination is discussed.     

Determination of lipoic acid in human urine by capillary zone electrophoresis

Fast, simple, and accurate CE method enabling determination of lipoic acid (LA) in human urine has been developed and validated. LA is a disulfide‐containing natural compound absorbed from the organism's diet. Due to powerful antioxidant activity, LA has been used for prevention and treatment of various diseases and disorders, e.g. cardiovascular diseases, neurodegenerative disorders, and cancer. The proposed analytical procedure consists of liquid–liquid sample extraction, reduction of LA with tris(2‐carboxyethyl)phosphine, derivatization with 1‐benzyl‐2‐chloropyridinium bromide (BCPB) followed by field amplified sample injection stacking, capillary zone electrophoresis separation, and ultraviolet‐absorbance detection of LA‐BCPB derivative at 322 nm. Effective baseline electrophoretic separation was achieved within 6 min under the separation voltage of 20 kV (∼80 μA) using a standard fused‐silica capillary (effective length 51.5 cm, 75 μm id) and BGE consisted of 0.05 mol/L borate buffer adjusted to pH 9. The experimentally determined limit of detection for LA in urine was 1.2 μmol/L. The calibration curve obtained for LA in urine showed linearity in the range 2.5–80 μmol/L, with R ² 0.9998. The relative standard deviation of the points of the calibration curve was lower than 10%. The analytical procedure was successfully applied to analysis of real urine samples from seven healthy volunteers who received single 100 mg dose of LA.     

Rapid analysis of charge variants of monoclonal antibodies with capillary zone electrophoresis in dynamically coated fused-silica capillary

A capillary zone electrophoresis (CZE) method was developed for the rapid analysis of charge heterogeneity of immunoglobulin G (IgG) monoclonal antibodies (mAbs). The separation was carried out in a short, dynamically coated fused-silica capillary. A number of separation parameters were investigated and optimized, including pH, concentration of the separation buffer (ε-amino caproic acid), concentration of the triethylenetetramine (TETA) dynamic coating, the capillary internal diameter and the field strength used for the separation. The effects of between-run flushing of the capillary and the data acquisition rate were also evaluated. Under the optimized conditions, a fast (<5 min), selective and reproducible separation of mAb charge variants was achieved under a very high electric field strength (1000 V/cm). This method also requires only a short conditioning of the capillary, with between-run conditioning completed within 2 min. The method was evaluated for specificity, sensitivity, linearity, accuracy and precision. The same separation conditions were applied to the rapid separation (2-5 min) of charge variants of multiple monoclonal antibodies with pI in the range of 7.0-9.5. Compared with other existing methods for charge variants analysis, this method has several advantages including a short run time, rapid capillary conditioning and simple sample preparation.     

Rapid separation of protein isoforms by capillary zone electrophoresis with new dynamic coatings

Many cellular functions are regulated through protein isoforms. Changes in the expression level or regulatory dysfunctions of isoforms often lead to developmental or pathological disorders. Isoforms are traditionally analyzed using techniques such as gel- or capillary-based isoelectric focusing. However, with proper electro-osmotic flow (EOF) control, isoforms with small pI differences can also be analyzed using capillary zone electrophoresis (CZE). Here we demonstrate the ability to quickly resolve isoforms of three model proteins (bovine serum albumin, transferrin, alpha1-antitrypsin) in capillaries coated with novel dynamic coatings. The coatings allow reproducible EOF modulation in the cathodal direction to a level of 10(-9) m2V(-1)s(-1). They also appear to inhibit protein adsorption to the capillary wall, making the isoform separations highly reproducible both in peak areas and apparent mobility. Isoforms of transferrin and alpha1-antitrypsin have been implicated in several human diseases. By coupling the CZE isoform separation with standard affinity capture assays, it may be possible to develop a cost-effective analytical platform for clinical diagnostics.