A reusable polymer supported copper catalyst for the C–N and C–O bond cross-coupling reaction of aryl halides as well as arylboronic acids

A simple and industrially viable protocol for C–N and C–O coupling was reported here. The polymer supported heterogeneous copper catalyst was prepared from chloromethyl polystyrene using a simple procedure. O-Arylation of substituted phenols with various aryl halides was achieved using this copper catalyst in DMSO medium. This heterogeneous copper catalyst, also efficiently works for the N-arylation of N–H heterocycles with aryboronic acids in methanol. This catalyst was also effective in amination reaction of primary amines with aryl halides as well as arylboronic acids in DMSO medium. The effects of solvent, base and temperature for the O-Arylation and amination reactions were reported. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused up to several times without sufficient loss of its catalytic activity.     

A reusable polymer supported copper catalyst for the C–N and C–O bond cross-coupling reaction of aryl halides as well as arylboronic acids

A simple and industrially viable protocol for C–N and C–O coupling was reported here. The polymer supported heterogeneous copper catalyst was prepared from chloromethyl polystyrene using a simple procedure. O-Arylation of substituted phenols with various aryl halides was achieved using this copper catalyst in DMSO medium. This heterogeneous copper catalyst, also efficiently works for the N-arylation of N–H heterocycles with aryboronic acids in methanol. This catalyst was also effective in amination reaction of primary amines with aryl halides as well as arylboronic acids in DMSO medium. The effects of solvent, base and temperature for the O-Arylation and amination reactions were reported. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused up to several times without sufficient loss of its catalytic activity.     

Synthesis of substituted acetylenes, aryl-alkyl ethers, 2-alkene-4-ynoates and nitriles using heterogeneous mesoporous Pd-MCM-48 as reusable catalyst

Pd-MCM-48 has been employed as a heterogeneous catalyst for the synthesis of substituted acetylenes via Sonogashira reactions under copper and amine-free reaction conditions. In addition, the catalyst exhibited excellent regioselectivity for primary alcohols towards C-O coupling leading to formation of alkyl-aryl ethers in high yields. A green procedure for the stereoselective synthesis of 2-alkene-4-ynoates and nitriles from the reactions of vic-(E)-diiodoalkenes with activated alkenes has also been demonstrated using Pd-MCM-48 catalyst. The catalyst was easily recovered from the reaction mixture by filtration and reused for at least six times with minimal loss of activity.     

Preparation of a novel CuI/PCMS heterogeneous catalyst for Heck-type cross-coupling reactions

A novel and environmentally friendly heterogeneous catalyst has been prepared through the wet impregnation of copper(I) species onto the highly porous chitosan microspheres (CuI/PCMS). This novel CuI/PCMS heterogeneous catalyst with no additional ligands is much better than CuI homogeneous catalysts when applied in Heck reactions. Moreover, the reaction conditions are much milder than those for the similar copper catalysts mediated cross-coupling reactions reported in the literature. PCMS has been demonstrated not only the excellent solid support, but also have many unique functional groups to chelate the copper (I) species to enhance its catalytic activity.     

Recyclable Porous Polymer‐Supported Copper Catalysts for Glaser and Huisgen 1,3‐Diolar Cycloaddition Reactions

A family of polymer‐attached phenanthrolines was prepared from solvothermal copolymerization of divinylbenzene with N‐(1,10‐phenanthroline‐5‐yl)acrylamide in different ratios. The polymer‐supported copper catalysts were obtained through typical impregnation with copper(II) salts. The polymers and supported copper catalysts have been characterized by N₂ adsortion, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TG); they exhibit a high surface area, hierarchical porosity, large pore volume, and high thermal and chemical stabilities. The copper catalyst has proved to be highly active for Glaser homocoupling of alkynes and Huisgen 1,3‐diolar cycloaddition of alkynes with benzyl azide under mild conditions at low catalyst loading. The heterogeneous copper catalyst is more active than commonly used homogeneous and nonporous polystyrene‐supported copper catalysts. In particular, the catalyst is easily recovered and can be recycled at least ten times without any obvious loss in catalytic activity. Metal leaching was prevented due to the strong binding ability of phenanthroline and products were not contaminated with copper, as determined by ICP analysis.     

Copper supported on phenanthroline-functionalized porous polymer as an active catalyst for the oxidative carbonylation of methanol

Porous organic polymer has recently attracted tremendous interest because of its potential to combine the best features of homogeneous and heterogeneous catalysts. In this study, copper supported on phenanthroline-functionalized porous polymer (Cu@PCP-Phen) was prepared by a co-polymerization method and used as a heterogeneous catalyst for dimethyl carbonate synthesis via the oxidative carbonylation of methanol. The catalyst was characterized by N₂ adsorption, scanning electron microscopy, transmission electron microscopy, ¹³C solid-state nuclear magnetic resonance, and X-ray photoelectron spectroscopy, which suggested that it possessed a big surface area, hierarchical porous structure, and strong electron-donating effect toward copper species. The Cu@PCP-Phen catalyst showed high catalytic activity, which was significantly higher than those achieved with Cu-based catalysts under similar reaction conditions. In addition, the catalyst can be easily separated and reused at least six times with only a slight decrease in activity. The salient features of this protocol are the simplicity in handling of the catalyst, high catalytic activity, excellent selectivity, low copper leaching, and good catalyst recyclability.     

Heterogeneous asymmetric Diels–Alder reactions using a copper–chiral bis(oxazoline) complex immobilized on mesoporous silica

A chiral bis(oxazoline)–copper complex was immobilized onto mesoporous silica and the resulting heterogeneous catalyst was employed in asymmetric Diels–Alder reactions. Reactions using the catalyst exhibited good enantioselectivity of 78% enantiomeric excess and endo/exo-selectivity (17:1) better than the corresponding homogeneous reaction. The catalyst could be easily recovered and reused several times without significant loss of the remarkable reactivity, diastereoselectivity and enantioselectivity.     

CS@Cu2O and magnetic Fe3O4@SiO2-pAMBA-CS-Cu2O as heterogeneous catalysts for CuAAC click reaction

The recovery of agricultural and food wastes are one of the main areas of current research for optimal biowaste management to reduce greenhouse gas (GHG) emissions that are generated when it is not properly treated. Corn silk (CS) as biowaste from the agricultural sector is a rich source of natural compounds especially polysaccharides. We present here a chemical activation method to convert CS to values added heterogeneous catalyst for the synthesis of triazoles compounds via copper catalyzed azide–alkyne cycloaddition (CuAAC) reaction. For this purpose, cuprous oxide coated CS (CS@Cu₂O) and multifunctional Fe₃O₄@SiO₂–para-aminomethyl benzoic acid–CS–Cu₂O composite (denoted as Fe₃O₄@SiO₂‐pAMBA-CS‐Cu₂O) were fabricated. Different analytical techniques have been used to describe the size, crystal structure, elemental composition and other physical properties of the fabricated catalysts. These heterogeneous catalysts showed excellent catalytic activities for the synthesis of 1,4-disubstituted-1,2,3-triazoles via click reaction in H₂O at 70 °C under base and external-reductant-free conditions. The magnetic properties of the catalyst allowed easy separation after reaction by simply applying an external magnet. Other advantages of this work are the recyclability of the catalyst, the absence of reducing agent and base, besides utilisation of bio wastes for the production of heterogeneous catalyst.     

Electrospun copper oxide nanoparticles as an efficient heterogeneous catalyst for N-arylation of indole

The N-arylation of indoles with a variety of aryl bromides is reported using copper oxide nanoparticles as a heterogeneous catalyst. These copper oxide nanoparticles, which were produced in a novel, facile, and scalable fashion via an electrospinning technique, resulted in an excellent product yield under mild conditions. Moreover, the catalyst was easily recovered and reused several times without significant loss of activity.     

A recyclable/reusable hydrotalcite supported copper nano catalyst for 1,4-disubstituted-1,2,3-triazole synthesis via click chemistry approach

Using hydrotalcite as solid support, copper nano particles were synthesized and used in azide-alkyne cycloaddition reaction en route to the synthesis of 1,4-disubstituted-1,2,3-triazoles. The catalyst is heterogeneous and can be recycled and reused easily. Room temperature reaction condition and the use of ethylene glycol as solvent make it an environment friendly system.     

Metal salt catalyzed carbenoids—XV: The synthetic and structural aspects of copper salt catalyzed additions of bis-methoxycarbonyl carbene to olefins

Experimental and structural details are presented for the addition of bis-methoxycarbonyl carbene to a number of olefins employing homogeneous and heterogeneous catalyzed decompositions of dimethyl diazomalonate by copper and silver salts. The cyclopropanations are stereospecific and are accompanied by appreciable amounts of allylic C-H insertion products which could formally be derived from allylic radical or ionic intermediates. Cyclopropanation with cis 2-heptene proceeds 5.20 times as fast as with the trans isomer and cyclohexene reacts 4.90 times faster than 1-methyl cyclohexene when the catalyst is iodo(trimethyl phosphite)copper(I).     

Copper‐Polymer Nanocomposite Catalyst for Synthesis of 1,4‐Diphenylbutadiyne‐1,3

A new catalyst for cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3 was prepared by thermolysis of copper(II) poly‐5‐vinyltetrazolate. It presents heterogeneous catalyst, in which copper nanoparticles are supported on polymeric matrix surface. The catalyst is recovered, recycled, and shows high catalytic activity in cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3. The reaction proceeds in aerobic conditions at room temperature in the presence of pyridine.     

A novel hydrophobic copper complex supported on γ‐Fe2O3 as a magnetically heterogeneous catalyst for one‐pot three‐component synthesis of α‐aminophosphonates

A novel hydrophobic copper complex supported on γ‐Fe₂O₃ is synthesized and characterized by different methods such as FT‐IR, XRD, TEM, SEM, TGA, VSM, ICP and CHN analysis. It was used as a magnetically recyclable heterogeneous catalyst for the efficient synthesis of α‐aminophosphonates via a one‐pot three‐component reaction under solvent‐free conditions. The present catalytic system worked extremely well for the synthesis of α‐aminophosphonates even up to five subsequent trails without significant loss of its catalytic activity or copper leaching. The TEM image and FT‐IR spectrum of the catalyst after five times recovery showed that the structure of the catalyst was stable under the reaction conditions with no change being observed. The strong magnetic properties of the reused catalyst were revealed by complete and easy attraction using an external magnet and also by VSM curve. This work represents the first and unique example of a hydrophobic copper complex for catalysis in water generating reactions.     

CuBTC在苯甲醇需氧氧化反应中的催化性能

CuBTC(BTC:1,3,5-均苯三酸)作为一种高效、可重复利用的非均相催化剂,在催化领域有着重要的应用。论文主要研究了在Cu-TEMOP体系下,CuBTC对苯甲醇的需氧氧化反应的催化效果。研究表明,在CuBTC的催化下,多种苯甲醇衍生物被有效的氧化成相应的醛,并且该催化体系有着较高的选择性,能高效氧化伯醇。与传统的均相铜盐催化剂相比,Cu(II)能稳定的固定在CuBTC的刚性结构骨架中,并且催化活性不会降低。但是,羧酸类物质会使CuBTC催化剂中毒,所以CuBTC不适用于原料、产物或者副产物中存在羧酸的反应体系。     

Graphene oxide/poly(vinyl imidazole) nanocomposite: an effective support for preparation of highly loaded heterogeneous copper catalyst

A heterogeneous polymeric catalyst was synthesized by immobilization of copper ions in a graphene oxide/poly(vinyl imidazole) nanocomposite. This catalyst has proven to be highly active in a practical protocol for click synthesis of 1,2,3‐triazole via one‐pot three‐component cycloaddition of halides, terminal alkynes and sodium azide. The reaction was carried out in water medium and good to excellent yields of products were obtained using only 1.0 mol% of catalyst. The catalyst can be readily recovered and reused eight times under the described reaction conditions without significant loss of activity. The reaction also proceeded well with only 0.002 mol% of catalyst, which shows the high activity of the resulting copper‐loaded nanocomposite. Copyright © 2015 John Wiley & Sons, Ltd.     

Iron‐catalyzed cross‐coupling reaction: Heterogeneous palladium and copper‐free Heck and Sonogashira cross‐coupling reactions catalyzed by a reusable Fe(III) complex

An interesting silica‐supported iron catalyst was successfully prepared and demonstrated as an efficient heterogeneous catalyst for cross‐coupling reactions of aryl halides. The as‐prepared nanocatalyst was well characterized and found to be highly efficient in Heck reaction under mild and sustainable conditions (water as solvent at 80 °C in short reaction time). Furthermore, the obtained catalyst was used as an efficient, inexpensive and green heterogeneous catalyst for Sonogashira cross‐coupling reactions of various aryl iodides and provided the corresponding products with moderate to good yields. This phosphine, copper and palladium‐free catalyst was simply recovered from the reaction mixture and recycled five times without substantial decrease in its catalytic activity.     

The first heterogeneous Sonogashira coupling reaction of aryl halides with terminal alkynes catalyzed by diatomite‐supported palladium(II) salophen complex

We report here our observation that, using appropriate reaction conditions, the Sonogashira reaction can be performed without the need for copper catalyst and solvent. Our approach involves the use of diatomite‐supported palladium(II) salophen complex as a catalyst and triethylamine as a base. The methodology works, to differing extents, for aryl iodides and bromides. This heterogeneous catalyst can be reused at least five times without any decrease in activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Copper‐ and phosphine‐free Sonogashira coupling reaction catalyzed by silica–(acac)‐supported palladium nanoparticles in water

A palladium‐based catalyst supported on acac‐functionalized silica was used as a heterogeneous catalyst for the Sonogashira cross‐coupling reaction of various aryl halides and phenylacetylene under copper‐ and phosphine‐free conditions. This catalytic system serves as an efficient and stable catalyst for this cross‐coupling reaction and allows easy separation and recycling of the catalyst. The catalyst could be recycled for five runs without appreciable loss of its catalytic activity. In addition, the reaction was carried out in water as a green solvent. Copyright © 2014 John Wiley & Sons, Ltd.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Copper-free Sonogashira cross-coupling reaction catalyzed by polymer-supported N-heterocyclic carbene palladium complex

A core-shell type of polymer-supported N-heterocyclic carbene (NHC) palladium catalyst was applied to Sonogashira cross-coupling reactions without copper cocatalyst under ambient atmosphere. This supported NHC-palladium complex efficiently catalyzed the copper-free Sonogashira reaction of various aryl iodides and bromides with terminal alkynes; the reaction exhibited high dependency on the temperature and the amount of base as well as its nature. In addition, this heterogeneous catalyst exhibited good reusability for the copper-free Sonogashira reaction.