The authors report on a novel sorbent (thermally treated natural zeolite; clinoptilolite) for use in dispersive micro-solid phase extraction (D-μ-SPE) of polycyclic aromatic hydrocarbons (PAHs) from water samples. The method was applied to the D-μ-SPE of 16 priority PAHs which then were quantified by gas chromatography with mass spectrometric detection (GC-MS). The method was validated in terms of specificity and selectivity, linearity and linear range, accuracy, precision, uncertainty, limits of detection and quantification. Figures of merit include (a) linear analytical ranges between 2.08 and 208 ppb, and (b) detection limits in the range from 0.01 to 0.92 ppb. The method was successfully applied to the determination of PAHs in river waters.
Graphical abstract Schematic representation of dispersive micro-solid phase extraction (D-μ-SPE) of trace levels of PAHs in water samples by using thermally treated clinoptilolite as sorbent prior to gas chromatography-mass spectrometry analysis (GC-MS).
A binary nanocomposite of type copper tungstate and polyaniline (CuWO4@PANI) is described that was obtained by single step polymerization on the surface of a glassy carbon electrode (GCE). The resulting electrode is shown to be a viable tool for voltammetric sensing of quercetin (Qn) in blood, urine and certain food samples. The nanocomposite was characterized by UV-visible absorption spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and high-resolution transmission electron microscopy. Differential pulse voltammetry was applied to quantify Qn, typically at the relatively low working potential of 0.15 V (vs. Ag/AgCl). The modified GCE has a wide analytical range (0.001–0.500 μM) and a low detection limit (1.2 nM). The sensor is reproducible, selective and stable. This makes it suitable for determination of Qn in real samples without complicated sample pretreatment.
Graphical abstract Schematic of a copper tungstate and polyaniline nanocomposite modified glassy carbon electrode for voltammetric determination of quercetin in real samples.
This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives.
A photoelectrochemical wire microelectrode was constructed based on the use of a TiO2 nanotube array with electrochemically deposited CdSe semiconductor. A strongly amplified photocurrent is generated on the sensor surface. The microsensor has a response in the 0.05–20 μM dopamine (DA) concentration range and a 16.7 μM detection limit at a signal-to-noise ratio of 3. Sensitivity, recovery and reproducibility of the sensor were validated by detecting DA in spiked human urine, and satisfactory results were obtained.
Graphical abstract Schematic of a sensitive photoelectrochemical microsensor based on CdSe modified TiO2 nanotube array. The photoelectrochemical microsensor was successfully applied to the determination of dopamine in urine samples.
An efficient approach is demonstrated for preparing particles consisting of a silver core and a shell of molecularly imprinted polymer (Ag@MIP). The MIP is prepared by using bisphenol A (BPA) as the template and 4-vinylpyridine as the functional monomer. The Ag@MIP fulfills a dual function in that the silver core acts as a SERS substrate, while the MIP allows for selective recognition of BPA. The Ag@MIP is characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis and Raman spectroscopy. The Raman intensity of Ag@MIP is higher than that of bare silver microspheres. The detection limit for BPA is as low as 10?9 mol·L?1.
Graphical abstract Schematic illustration of the preparation of silver microspheres coated with a molecularly imprinted polymer (Ag@MIPs) for detecting bisphenol A (BPA) by surface enhanced Raman scattering (SERS).
We report on a sensitive and selective fluorescent assay utilizing native carbon dots (CDs) as signal transducers. The optical probes 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) or 3,3′-diaminobenzidine (DAB) were employed as substrates of horseradish peroxidase (HRP). It was found that the corresponding oxidation products (ox-ABTS or ox-DAB) quench the fluorescence of CDs, mainly via photoinduced electron transfer in case of ox-ABTS, and via aggregation and inner filter effect in case of ox-DAB. By coupling with bienzyme (glucose oxidase and HRP)-mediated biocatalytic reactions, the method was applied to the determination of hydrogen peroxide and glucose. In case of ABTS as the substrate of HRP, a wide linear range (0.05 to 100 μM) and a very low detection limit (10 nM) for glucose were attained. The method was applied to the determination of glucose in human serum and the results were found to agree well with data provided by a local hospital.
Graphical abstract In this work, a sensitive and selective fluorescent assay was developed for probing the enzymatic substrates of hydrogen peroxide and glucose which utilized native carbon dots (CDs) as signal transducer.
Cobalt oxyhydroxide (CoOOH) nanosheets are efficient fluorescence quenchers due to their specific optical properties and high surface area. The combination of CoOOH nanosheets and carbon dots (CDs) has not been used in any aptasensor based on fluorescence quenching so far. An aptamer based fluorometric assay is introduced that is making use of fluorescent CDs conjugated to the aptamer against methamphetamine (MTA), and of CoOOH nanosheets which reduce the fluorescence of the CDs as a quencher. The results revealed that the conjugated CDs with aptamers were able to enclose the CoOOH nanosheets. Consequently, fluorescence is quenched. If the aptamer on the CD binds MTA, the CDs are detached from CoOOH nanosheets. As a result, fluorescence is restored proportionally to zhe MTA concentration. The fluorometric limit of detection is 1 nM with a dynamic range from 5 to 156 nM. The method was validated by comparing the results obtained by the new method to those obtained by ion mobility spectroscopy. Theoretical studies showed that the distance between CoOOH nanosheet and C-Ds is approximately 7.6 Å which can illustrate the possibility of FRET phenomenon. The interactions of MTA and the aptamer were investigated using molecular dynamic simulation (MDS).
Graphical abstract Carbon dots (C-Ds) were prepared from grape leaves, conjugated to aptamer, and adsorbed on CoOOH nanosheets. So, the fluorescence of C-Ds is quenched. On addition of MTA, fluorescence is restored.
An electrochemical approach is introduced for synthesis of carbon dots (CDs) by exfoliating graphite rods at a voltage of 15 V in an electrolyte consisting of a mixture of water and two ionic liquids. It is found that the size of the CDs can be tuned by varying the fraction of water in the mixed electrolyte; CDs in sizes of 4.9, 4.1 and 3.1 nm are obtained if the electrolyte contains water in fractions of 24, 38 and 56 %, respectively. The CDs have a quantum yield of almost 10 % and display the typical excitation wavelength-dependent maxima of photoluminescence, strongest at excitation/emission wavelengths of 360/440 nm. Fourier transform infrared and X-ray photoelectron spectroscopy show the CDs to have oxygen functional groups on their surface which strongly improve solubility. The CDs were applied to image cells of the electricity-producing bacteria Shewanellaoneidensis MR-1.
Graphical Abstract An electrochemical approach is introduced to synthesize carbon dots by exfoliating graphite rods in mixed electrolyte of water and ionic liquids. The increasing size of carbon dots was realized by reducing the volume of water in the mixed electrolyte. The carbon dots were used to fluorescently image the electricity-producing bacterium Shewanellaoneidensis MR-1.
This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed.
Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.
The authors describe a fluorometric aptamer based assay for adenosine triphosphate (ATP). It is based on the use of carbon dots (CDs) and graphene oxide (GO). The resultant CD-aptamer is adsorbed on the surface of GO via π-stacking and hydrophobic interaction, and the fluorescence of CD-aptamer is quenched via fluorescence resonance energy transfer (FRET) between CDs and GO. If ATP is present, it will bind to the aptamer and the CD-aptamer will be desorbed from GO. This will suppress FRET and the fluorescence of the CDs is restored. Under the optimal conditions and at typical excitation/emission wavelengths of 358/455 nm, the assay has a 80 pM detection limit and a linear range that extends from 0.10 to 5.0 nM concentrations of ATP. The method was successfully applied to the determination of ATP in yogurt samples. This method can also be conceivably applied to the detection of other analytes for which appropriate aptamers are available.
Graphical abstract Schematic of a novel fluorometric ATP assay based on the fluorescence resonance energy transfer (FRET) between aptamer modified carbon dots (CD-aptamer) and graphene oxide (GO). CD-aptamer was used as the energy donor and molecular recognition probe, and GO acted as energy acceptor. This assay exhibits high sensitivity and selectivity with a detection limit as low as 80 pM.
A fluorometric ATP assay is described that makes use of carbon dots and graphene oxide along with toehold-mediated strand displacement reaction. In the absence of target, the fluorescence of carbon dots (with excitation/emission maxima at 360/447 nm) is strong and in the “on” state, because the signal probe hybridizes with the aptamer strand and cannot combine with graphene oxide. In the presence of ATP, it will bind to the aptamer and induce a strand displacement reaction. Consequently, the signal probe is released, the sensing strategy will change into the “off” state with the addition of graphene oxide. This aptasensor exhibits selective and sensitive response to ATP and has a 3.3 nM detection limit.
Graphical abstract Schematic of signal amplification by strand displacement in a carbon dot based fluorometric assay for ATP. This strategy exhibits high sensitivity and selectivity with a detection limit as low as 3.3 nM.
We describe a highly sensitive glucose probe based on carbon dots modified with MnO2. A strong reduction of the green fluorescence of the carbon dots (CDs) happened due to the surface energy transfer (SET) from CDs to the deposited MnO2. In the presence of H2O2 (formed via enzymatic oxidation of glucose), fluorescence is restored because the MnO2 nanosheets are reduced to form colorless Mn(II) ions. These findings were used to design a fluorometric glucose assay that has a detection limit as low as 44 nM (at an S/N ratio of 3).
Graphical Abstract A strong reduction of the green fluorescence of the carbon dots (CDs) occurs due to surface energy transfer (SET) from CDs to the deposited MnO2. In the presence of H2O2 (formed by enzymatic action of glucose oxidase) the MnO2 nanosheets are reduced to form colorless Mn(II) ions, and glucose can be quantified by the fluorescence restored.
A method is described for the synthesis of a nanocomposite containing FeOOH and N-doped carbon nanosheets. The nanocomposite was synthesized by a hydrothermal method using a Fe3O4/chitosan nanocomposite as the precursor. The nanocomposite displays peroxidase-like activity and catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H2O2. This results in the formation of a blue colored product with an absorption maximum at 652 nm in the UV-vis spectra. Based on these findings, colorimetric assays were worked out for both hydrogen peroxide and glucose. The H2O2 assay works in the 5 to 19 μM concentration range, and the limit of detection is 5 nM. The glucose assay works in the 8 μM to 0.8 mM concentration range and has a 0.2 μM detection limit. The method was successfully applied to the determination of glucose in human urine.
Graphical abstract Schematic of the hydrothermal synthesis of a FeOOH/N-doped carbon nanocomposite. It was used to replace peroxidase enzyme for the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in a visual colorimetric test for glucose in human urine.
The authors describe an ethylene glycol assisted precipitation method for synthesis of Er(III)/Yb(III)-doped BiF3 nanoparticles (NPs) at room temperature. Under 980-nm light irradiation, the NPs emit upconversion (UC) emission of Er(III) ions as a result of a two-photon absorption process. The temperature-dependent green emissions (peaking at 525 and 545 nm) are used to establish an unambiguous relationship between the ratio of fluorescence intensities and temperature. The NPs have a maximum sensitivity of 6.5?×?10?3 K?1 at 619 K and can be applied over the 291–691 K temperature range. The results indicate that these NPs are a promising candidate for optical thermometry.
Graphical abstract Schematic of the room-temperature preparation of Er(III)/Yb(III)-doped BiF3 nanoparticles with strongly temperature-dependent upconversion emission.
It is found that the fluorescence of carbon dots (CD) with an emission peak at 459 nm is strongly quenched by silver nanoparticles (AgNPs) with their absorption peak at 430 nm. The finding was applied in a fluorescence quenchometric lateral flow immunochromatographic assay for detection of zearalenone (ZEN) with CDs conjugated to ovalbumin (OVA) as donor signal probe and AgNP-Ab as acceptor signal probe. The assay has an LOD of 0.1 μg·L?1 for ZEN. This is 10 times better than the respective “turn-off” AgNP-based LFIA. In case of cereal samples and their products, the LODs range from 1 to 2.5 μg·kg?1. Only minor cross reactivity is found for fusarium toxins, and no cross-sensitivity for aflatoxin B1, T-2 mycotoxin, ochratoxin A, deoxynivalenol, and fumonisin B1. The assay represents a simple, sensitive, and rapid tool for determination of ZEN in cereal samples and their products.
Graphical abstract Schematic presentation of fluorescence quenching lateral flow immunochromatographic assay (FLFIA) based on carbon dots (CD) and silver nanoparticle (AgNP) fluorescence resonance energy transfer (FRET) system for the rapid high sensitive detection of zearalenone (ZEN) in cereal samples.
A voltammetric sensor is described for the quantitation of propyl gallate (PG). A screen-printed carbon electrode (SPCE) was modified with reduced graphene sheets that were decorated with cobalt diselenide nanoparticles (CoSe2@rGO). The material was hydrothermally prepared and characterized by several spectroscopic techniques. The modified SPCE displays excellent electrocatalytic ability towards PG. Differential pulse voltammetry, with a peak voltage at 0.34 V (vs. Ag/AgCl) has a sensitivity of 12.84 μA·μM?1·cm?2 and a detection limit as low as 16 nM. The method is reproducible, selective, and practical. This method was applied to the determination of PG in spiked meat samples, and the result showed an adequate recovery.
The authors report that sulfide ions are capable of inhibiting the peroxidase-like activity of copper nanoclusters (CuNCs). The catalytic activity of CuNCs toward the oxidation of the chromogenic substrate 3,3′,5,5′-tetramethylbenzidine by H2O2 is remarkably decreased in the presence of sulfide. Based on this finding, a colorimetric assay was developed for the rapid determination of sulfide. Best operated at a wavelength of 652 nm, it has a 0.5 μM detection limit. The method is highly selective and has been successfully applied to the quantification of sulfide in environmental water samples.
Graphical abstract The catalytic activity of CuNCs toward the oxidation of 3,3′,5,5′-tetramethylbenzidine by H2O2 is remarkably decreased in the presence of sulfide ions. This finding has been applied to design a method for colorimetric quantification of sulfide ions in environmental samples.
This article reports on the synthesis of water dispersible carbon quantum dots (CDs) by a one-step hydrothermal method using polyamidoamine (PAMAM) and (3-aminopropyl)triethoxysilane (APTES) as a platform and passivant. The resulting CDs are highly uniform and finely dispersed. The synergistic effect between PAMAM and APTES on the surface of the CDs results in a fluorescence that is much brighter than that of CDs modified with either APTES or PAMAM only. The fluorescence of the co-modified CDs is quenched by Hg(II) ions at fairly low concentrations. Under the optimum conditions, the intensity of quenched fluorescence drops with Hg(II) concentration in the range from 0.2 nM to 10 μM, and the detection limit is 87 fM. The effect of potentially interfering cations on the fluorescence revealed a high selectivity for Hg2+. The fluorescent probe was applied to the determination of Hg(II) in (spiked) waters and milk and gave recoveries between 95.6 and 107 %, with relative standard deviation between 4.4 and 6.0 %.
Graphical abstract Strongly fluorescent carbon quantum dots (CDs) modified with polyamidoamine (PAMAM) and 3-aminopropyltriethoxysilane (APTES) were synthesized by one-step hydrothermal strategy. The resulting co-modified CD s were used as fluorescent probe for sensitive and selective detection of Hg2+.
An electrochemical nanoaptasensor is described that is based on the use of a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs). An aptamer (Apt) against trinitrotoluene (TNT) was then immobilized on the AgNPs. The addition of TNT to the modified GCE leads to decrease in peak current (typically measured at a potential of ?0.45 V vs. Ag/AgCl) of riboflavin which acts as an electrochemical probe. Even small changes in the surface (as induced by binding of Apt to TNT) alter the interfacial properties. As a result, the LOD is lowered to 33 aM, and the dynamic range extends from 0.1 fM to 10 μM without sacrificing specificity.
Graphical abstract Schematic presentation of a nanoaptasensor which is based on a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs) and aptamer (Apt). It was applied to the detection of 2,4,6-trinitrotoluene (TNT) with the help of riboflavin (RF) as a redox probe.
Hydroxyapatite nanoparticles (HAP-NPs) were rendered fluorescence by doping with Eu(III) ion. The resulting fluorescent NPs are shown to be viable probes for sensitive and selective determination of dipicolinic acid (DPA), a major constituent of bacterial spores as used in bioterrorism. It is found that the addition of DPA to solutions of such HAP-NPs result in an enhancement of fluorescence due to the coordination of DPA with the Eu(III) dopant. The assay allows DPA to be detected in the 0.1 to 40 μM concentration range and with a 77 nM detection limit. The assay was applied to the detection of spores of Bacillus subtilis. The attractive properties of the probe make it a promising candidate for used in rapid detection of pathogenic bacterial spores.
Graphical abstract Fluorescent hydroxyapatite nanoparticles (HAP-NPs) are shown to be a viable probe for detection of dipicolinic acid, a major constituent of bacterial spores. The red asterisks represent the fluorescence intensity of the HAP-NPs.
