Red-emitting salicylaldehyde Schiff base with AIE behaviour and large Stokes shift

Three salicylaldehyde Schiff base (SSB) with AIE behavior were designed and facilely synthesized through a condensation reaction. In solid and aggregation states, these SSB dyes exhibited yellow to red emission with large Stokes shift. One of SSB dyes could specifically stain lipid droplets in living cells.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.     

A rapid method for the detection of humic acid based on the poly(thymine)-templated copper nanoparticles

A label-free fluorescent method for sensitive detection of humic acid based on poly(thymine)-templated copper nanoparticles is reported.     

Synthesis and properties of a new AIE macrocyclic emitter with triarylamine backbone

A new macrocyclic AIE emitter composed of triarylamine backbone was successfully synthesized through convenient homocoupling procedure and easily purified by silica gel column chromatography, and recrystallization. The optical and electrochemical properties of the compound have been investigated. Intriguingly, the compound shows dual emission both 423 nm and 505 nm. This result implied that the violet emission was originated from an isolated component of the emitter, whereas the yellowish-green emission simultaneously exhibited AIE nature. The compound exhibits enough thermal stability and high glass transition temperature to be applied for organic devices.     

Ovalbumin-stabilized gold nanoclusters with ascorbic acid as reducing agent for detection of serum copper

Ovalbumin-stabilized gold nanoclusters(OVA@AuNCs) were prepared with ascorbic acid as a reducing agent. This strategy could realize the synthesis of water-soluble OVA@AuNCs within 20 min. The asprepared fluorescent probe showed a red fluorescence emission at 630 nm. Moreover, the properties of the OVA@AuNCs were characterized by transmission electron microscope, dynamic light scattering,ultraviolet-visible spectroscopy, fluorescent spectroscopy. Based on the surface electron density decrease-induced fluorescence quenching mechanism, the OVA@AuNCs provided high sensitivity and selectivity for sensing copper ions. A good linear relationship was obtained between the fluorescence intensity of OVA@AuNCs and the concentration of copper ions in the range of 5.0-100.0 μmol/L(R~2=0.999) with a detection limit of 640 nmol/L Furthermore, the rat serum copper contents were determined by using the OVA@AuNCs based assay, indicating great potential of fluorescent probes for application in biological and clinical analysis.     

Synthesis and properties of a thiophene-substituted diaza[7]helicene for application as a blue emitter in organic light-emitting diodes

Carbazole-based diaza[7]helicene substituted by thiophene groups, 2,12-dithiophene-5,15-dihexyl-5,15-diaza[7]helicene (6), was synthesised successfully and confirmed by ¹H NMR, ¹³C NMR, High Resolution Mass Spectrometry, Time of Flight Mass Spectrometry. Compound 6 exhibited good solubility and excellent thermal stability with no melting point and a high decomposition temperature of 453.64 °C. A doped device with a structure of ITO/NPB (50 nm)/CBP: 10% 6 (30 nm)/Bphen (20 nm)/Mg:Ag (150 nm)/Ag (50 nm) emitted the blue light at 460 nm with Commission Internationale de LEclairage (CIE) coordinate of (0.176, 0.26). The maximum brightness and external quantum efficiency (EQE) were 2306 cd m^?2 and 0.41%, respectively.     

Synthesis of a reduction-sensitive Bletilla striata polysaccharide amphiphilic copolymer

A reduction-sensitive stearic acid modified-Bletilla striata polysaccharide amphiphilic copolymer is synthesized. The copolymer enabled to spontaneously form micelles which display faster docetaxel release rates under reduction condition and enhanced anticancer activity in vitro after incorporating docetaxel into micelles.     

Highly selective fluorescence turn-on determination of fluoride ions via chromogenic aggregation of a silyloxy-functionalized salicylaldehyde azine

A novel fluorescent chemsensor TBS-protected salicylaldehyde azine (TSAA) for fluoride ion was developed based on aggregation-induced emission (AIE). The probe TSAA was prepared by the reaction of salicylaldehyde azine (SAA) with tert-butyldimethylsilyl chloride (TBS-Cl) via an unusual synthetic methodology and shows only non-emission. Upon treatment with fluoride in aqueous MeCN solution, the TBS protective group of probe TSAA was removed readily and the fluorescence of the probe was switched on, which resulted in a new fluorescence peak around 543 nm. The fluorescent intensity at 543 nm increases linearly with fluoride ion concentration in the range 1–50 μmol L^?1. This proposed probe shows excellent selectivity toward fluoride ion over other common anions and cations.     

Novel phosphorescent neutral iridium(III) complex with the steric hindrance for highly efficient red organic light-emitting diodes

A novel and highly efficient thiophenquinolone-based red iridium(III) complex bearing a bulky fluorophenyl moiety is designed and synthesized. The complex shows intensive red phosphorescence (596 nm with shoulder at 642 nm), high photoluminescence efficiency (0.62) and broad full width at half maximum (81 nm). The bulky fluorophenyl moiety introduced into the complex could improve the efficiency of electroluminescence with the maximum current efficiency, power efficiency and the external quantum efficiency up to 29.0 cd/A, 30.4 lm/W and 17.6% due to the effective steric hindrance in solid states.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

Synthesis and red electroluminescence of a dimesityl-functionalized bistetracene

The single crystal analysis of the as-prepared 8,16-dimesityltetraceno[2,1,12,11-opqra]tetracene (DMTA) suggests that the parent bistetracene backbone is almost in a plane without any intermolecular p-stacking interaction. The fabricated devices based on DMTA as an emitter exhibit a maximum brightness of 632 cd/m² at 14.7 V with the CIE coordinate of (0.623, 0.349).     

A simple and highly selective fluorescent sensor for palladium based on benzofuran-2-boronic acid

Benzofuran-2-boronic acid could be used as a fluorescent sensor for the detection of Pd²⁺ because it was rapidly converted to highly fluorescent derivative after mixing with Pd²⁺ under basic condition at room temperature. We found that dimerization of benzofuran was occurred to form fluorescent derivative by the catalytic activity of palladium. The fluorescence intensity at 360 nm increased with increasing the concentration of Pd²⁺. The excellent selectivity for Pd²⁺ was demonstrated among other metal ions. Based on this findings, we successfully applied benzofuran-2-boronic acid to develop a microplate-based assay for high-throughput measurement of Pd²⁺. The detection limit (blank + 3SD) for Pd²⁺ of the proposed assay was 9.8 nM.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

Super-resolution morphological dissemination of intercalating dye in single DNA molecules via binding activated localization microscopy

Super-localization of intercalating dye YOYO-1 in single λ-DNA at super-resolution by binding activation localization microscopy (BALM).     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

Novel strategy of constructing fluorescent probe for MAO-B via cascade reaction and its application in imaging MAO-B in human astrocyte

A novel strategy was developed to detect MAO-B and image MAO-B in human astrocyte by constructing coumarin via cascade reaction and intramolecular cyclization.     

One-pot photoreduction to prepare NIR-absorbing plasmonic gold nanoparticles tethered by amphiphilic polypeptide copolymer for synergistic photothermal-chemotherapy

We developed one-pot photoreduction strategy to fabricate the NIR-absorbing plasmonic PLC-b-PEO@Au NPs. It possessed strong NIR absorption at 700-1100 nm, an ultrahigh photothermal conversion efficiency of 62.1%, and good photostability.     

Synthesis of 2,3-dihydropyrroles by photo rearrangement of Hantzsch 1,4-dihydropyridines with high diastereoselectivity

The Hantzsch 1,4-dihydropyridines were found to be transforming to the 2,3-dihydropyrroles by photo rearrangement with air under irradiation of LED light (410 nm) with high diastereoselectivity (dr > 20:1). This reaction includes tandem photo oxidation/rearrangement. The 2,3-dihydropyrroles were obtained in moderate yields with successfully one-pot process starting from aldehydes, ammonium acetate and ethyl acetoacetate.     

A study of scandia and rhenium doped tungsten matrix dispenser cathode

Scandia and rhenium doped tungsten powders were prepared by solid–liquid doping combined with two-step reduction method. The experimental results show that scandia was distributed evenly on the surface of tungsten particles. The addition of scandia and rhenium could decrease the particle size of doped tungsten, for example, the tungsten powders doped with Sc₂O₃ and Re had the average size of about 50 nm in diameter. By using this kind of powder, scandia and rhenium doped tungsten matrix with the sub-micrometer sized tungsten grains was obtained. This kind of matrix exhibited good anti-bombardment insensitivity at high temperature. The emission property result showed that high space charge limited current densities of more than 60 A/cm² at 900 °C could be obtained for this cathode. A Ba–Sc–O multilayer about 100 nm in thickness formed at the surface of cathode after activation led to the high emission property.