低温热处理氧化钨电致变色薄膜的制备与性质

低温热处理氧化钨电致变色薄膜的制备与性质;电致变色;溶胶 凝胶法;聚乙烯醇;氧化钨     

三联吡啶铁配位聚合物电致变色材料的合成及性能

将芳环作为桥联基团引入到2个三联吡啶单元之间构建多齿配体，与四氟硼酸亚铁六水合物配位，制备了一类新型的三联吡啶铁配位聚合物，并研究了其在水系电解液中的电致变色性能。研究结果表明，芳环上氟原子的引入对材料电致变色性能具有一定的影响。其中，采用含有2个氟原子的配体F2制备的铁配位聚合物Fe-F2表现出优异的电致变色性能(光学对比度高达69%，响应时间短至0.5 s，着色效率超过320 cm²·C^-1)。     

介孔氧化钨电色薄膜的制备与性能研究

采用一种新的非离子型gemini表面活性剂结构导向模板, 成功制备了介孔氧化钨薄膜. 通过SAXRD, TEM和N₂吸附-脱附等方法考察薄膜的制备和微结构特性, 发现获得的产物具有三维蠕虫介孔结构, 比表面积可达145.5 m²• g^－1. 测定了该薄膜在无水高氯酸锂/碳酸丙烯酯电解质溶液中的循环伏安和电致变色性能, 并与无模板薄膜进行了对比研究. 研究表明, 由于具有更大的电化学活性比表面, 纳米介孔氧化钨薄膜表现出增强的电色性能, 在633 nm波长处的透过率调制幅度可达60%以上, 着色效率为51.7 cm²•C^－1.     

盘状多酸P_5W_(30)/阳离子聚电解质/氧化石墨烯杂化多层膜的电致变色性能

为了提高薄膜[PEI/P_5W_(30)]_(30)的电致变色性能,将具有大的二维尺寸和良好导电性的氧化石墨烯引入该薄膜中。通过层层自组装(LBL)技术构筑了基于盘状多酸K12.5Nal.5[Na P_5W_(30)O_(110)]·15H_2O(P_5W_(30))、氧化石墨烯(GO)的复合薄膜[PEI/P_5W_(30)/PEI/GO]_(30)(PEI:聚乙烯亚胺),并利用UV-Vis光谱对薄膜的组成及增长进行监测;通过原子力显微镜对薄膜的表面形貌进行考察,利用循环伏安法对薄膜电化学氧化还原性质进行研究;薄膜在外加氧化还原电位下呈现出无色/蓝色的可逆变化,电致变色响应时间在10 s以内;此外,薄膜在阶跃电位0.75 V/-0.75 V下循环150次,电致变色性能没有明显减弱,体现了薄膜良好的电致变色可逆性。氧化石墨烯的引入使薄膜[PEI/P_5W_(30)/PEI/GO]_(30)呈现出响应速度快、抗电疲劳强的电致变色性能,将在电致变色器件领域有广阔的应用前景。     

MoO_3电致变色薄膜的XPS研究

近年来 ,随着人们提倡节能和使用洁净能源 ,无机电致变色材料在建筑物采光控制系统和反射率可调表面的应用研究 ,已成为材料领域的一个新热点 .WO3、 MoO3等过渡金属氧化物薄膜具有良好的电致变色效应 ,是人们研究的重点 .其中 MoO3的电致变色效果要好于 IrO2、 TiOx、 CoO及 NiOx等电致变色材料 [1],而且它在可见光区有比 WO3更柔和的色彩 ,使人眼更易于适应其颜色变化 .着色态的 MoO3称为钼青铜 ,其开路记忆也好于钨青铜 [2].故 MoO3电致变色薄膜是极有潜力用于实用化的电致变色器件 .MoO3薄膜常用的制备方法有真空蒸 发、化学气…     

三联吡啶铁配位聚合物电致变色材料的合成及性能

将芳环作为桥联基团引入到2个三联吡啶单元之间构建多齿配体,与四氟硼酸亚铁六水合物配位,制备了一类新型的三联吡啶铁配位聚合物,并研究了其在水系电解液中的电致变色性能。研究结果表明,芳环上氟原子的引入对材料电致变色性能具有一定的影响。其中,采用含有2个氟原子的配体F2制备的铁配位聚合物Fe-F2表现出优异的电致变色性能（光学对比度高达69%,响应时间短至0.5 s,着色效率超过320 cm²·C^-1）。     

获得高性能电致变色薄膜的ITO表面修饰方法

氧化铟锡玻璃(ITO)以其优良的导电性能和透过率以及相对低的反应活性使其在显示器和电致变色器件中有广泛的应用. 然而, ITO表面的金属氧化物基团也带来了一些问题, 如通过物理方法沉积的电致变色薄膜易从ITO基底上脱离, 从而降低器件寿命, 此种问题在使用液体电解质时显得尤为突出. 为此, 我们利用有机酸小分子对ITO基底表面进行修饰, 继而利用电化学沉积的方法制备聚3,4-(2,2-二甲基丙烯二氧基)噻吩电致变色薄膜. XPS结果表明基底与修饰物间以化学键结合, 超声波处理可以看出电致变色薄膜在修饰后的基底上有更好的稳定性. 本研究提供了一种简单易行的方法来获得高性能的高分子电致变色薄膜.     

离子液体中聚3-己基噻吩的制备及电致变色性质和器件的研究

以室温离子液体1-丁基-3-甲基咪唑六氟磷酸盐[BMIM]PF₆为溶剂及支持电解质,通过电化学方法制备聚(3-己基噻吩)(PHexT)膜。采用循环伏安法和扫描电子显微镜,对膜的电化学性质及形貌结构进行表征。同时通过紫外可见光谱、计时电流、计时库仑以及计时吸收曲线等方法研究聚合物膜的光谱电化学和电致变色特性,并在此基础上制备PHexT膜的电致变色器件。实验结果表明,在离子液体中制备的PHexT膜光滑致密,掺杂态时为蓝色,脱掺杂时为桔红色,并且具有高的颜色对比度 (40%),较短的响应时间 (2.5 s) 和高的电致变色着色效率 (230cm²/C),该膜制成的固态电致变色器件具有很好的电致变色性能和长的循环寿命。     

多酸/邻菲罗啉钌LBL薄膜的制备及电化学调控荧光开关性能

通过层层静电自组装技术制备了基于电致变色多酸P_8W_(48)与发光邻菲罗啉钌Ru(phen)的杂化红光薄膜[(PEI/P_8W_(48))_m/PEI/PSS/Ru(phen)/PSS]_(15)[m=1,3,5;PEI=聚乙烯亚胺;PSS=聚(4-苯乙烯磺酸钠)].利用紫外-可见光谱对薄膜的组成及增长进行了表征;通过循环伏安法对薄膜的电化学氧化还原性质进行了考察;通过荧光光谱对薄膜的发光性质进行了研究.结果表明,薄膜在外加氧化还原电位下呈现出可逆的电致变色-荧光开关性质;在阶跃电位-0.85 V/0.85 V下循环50次,其电致变色及荧光开关性能没有明显的减弱,体现了良好的电化学稳定性.     

氧化铑变色薄膜的制备及其电变色研究

采用溶胶-凝胶方法制备了氧化铑电致变色薄膜。通过施加阴极或阳极电位, 薄膜在碱性电解液中呈现从亮黄（还原态）到深绿（氧化态）的可塑颜色变化,而 且可达到上千次循环而性能不变。采用XRD,SEM,TG,DTA,UVV,FTIR和循环伏安 等技术对薄膜的晶态、形貌、热处理过程和电变色过程进行了研究。得出100 ℃处 理的膜内含有一定量的结晶水,其性能最好。对薄膜的电致变色性能如：着色效率 、响应时间及循环寿命、开路记忆等进行了测试,并讨论了氧化铑薄膜电变色的反 应机理。     

Acidichromism in the LB film of bolaform Schiff base

A bolaform(BNC 10)and single-headed(HNOA)amphiphilic Schiff bases containing naphthyl group were designed and their Langmuir-Blodgett films were investigated.It was found that both the LB films show acidichromism,i.e.a reversible color change upon alternatively exposing the films to HCl and NH_3 gases,respectively.It was further found that the bolaform Schiff bases film could trap NH_3 gas during the acidichromic process.     

Colorimetric Solvent Indicators Based on Nafion Membranes Incorporating Nickel(II)‐Chelate Complexes

To develop solvent‐recognition films, Nafion membranes incorporating cationic nickel‐chelate complexes, that is, [Ni(L¹)(L²)]⁺ (HL¹=acetylacetone, 2,2,6,6‐tetramethyl‐3,5‐heptanedione; L²=N,N‐diethylethylenediamine, N‐butyl‐N,N′,N′‐trimethylethylenediamine), were prepared. Immersion of the films in various solvents effected the color changes varying from red to pale blue green depending on the donor number of the solvents. The color change is based on an equilibrium shift between square‐planar and solvent‐coordinated octahedral geometries of the cations. The degree of the color change depended on the affinity of the incorporated complex to the solvent molecules. The films were robust and exhibited a reversible solvent response. The films exhibited thermochromism when a small amount of appropriate solvents were incorporated and changed from pale blue green at low temperatures to red at high temperatures.     

Mechano- and Photoresponsive Behavior of a Bis(cyanostyryl)benzene Fluorophore

The mechanoresponsive behavior and photochemical response of a new bis(cyanostyryl)benzene fluorophore (CSB-5) were investigated. Green fluorescence with λ_em,max of 507 nm was found for CSB-5 in chloroform solution, mirroring the behavior of a previously reported similar dye (CSB-6). Alternatively, crystalline samples of CSB-5 exhibited orange fluorescence with λ_em,max of 620 nm, attributable to excimer emission. Although the emission color change was not clearly noticeable by naked eye, CSB-5 exhibited mechanochromic luminescence, due to transformation into the amorphous state upon grinding the crystalline powder. Interestingly, rubbed films of CSB-5 prepared on glass substrates exhibited a pronounced emission color change from orange to green when exposed to UV light. This response is the result of a photochemical reaction that occurs in the amorphous state and which causes a decrease of the excimer emission sites so that the emission color changes from excimer to monomer. The crystalline material did not display such a photoinduced emission color change and the difference in photochemical reactivity between crystalline and amorphous states was exploited to pattern the emission color of rubbed films.     

仿花瓣表面多功能高分子纳米薄膜的制备

以红玫瑰花瓣为模板, 用纳米压印图案转移法进行仿生合成, 获得具有多功能性的高分子薄膜. 通过将薄膜进行染色, 制得了具有特殊花瓣颜色的人工薄膜, 并探讨了化学色与结构色之间的关系.     

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.     

Dynamic Color‐Switching of Plasmonic Nanoparticle Films

The fast and reversible switching of plasmonic color holds great promise for many applications, while its realization has been mainly limited to solution phases, achieving solid‐state plasmonic color‐switching has remained a significant challenge owing to the lack of strategies in dynamically controlling the nanoparticle separation and their plasmonic coupling. Herein, we report a novel strategy to fabricate plasmonic color‐switchable silver nanoparticle (AgNP) films. Using poly(acrylic acid) (PAA) as the capping ligand and sodium borate as the salt, the borate hydrolyzes rapidly in response to moisture and produces OH^? ions, which subsequently deprotonate the PAA on AgNPs, change the surface charge, and enable reversible tuning of the plasmonic coupling among adjacent AgNPs to exhibit plasmonic color‐switching. Such plasmonic films can be printed as high‐resolution invisible patterns, which can be readily revealed with high contrast by exposure to trace amounts of water vapor.     

Multicolor Fluorescence Writing Based on Host–Guest Interactions and Force‐Induced Fluorescence‐Color Memory

A new strategy is reported for multicolor fluorescence writing on thin solid films with mechanical forces. This concept is illustrated by the use of a green‐fluorescent pentiptycene derivative 1 , which forms variably colored fluorescent exciplexes: a change from yellow to red was observed with anilines, and fluorescence quenching (a change to black) occurred in the presence of benzoquinone. Mechanical forces, such as grinding and shearing, induced a crystalline‐to‐amorphous phase transition in both the pristine and guest‐adsorbed solids that led to a change in the fluorescence color (mechanofluorochromism) and a memory of the resulting color. Fluorescence drawings of five or more colors were created on glass or paper and could be readily erased by exposure to air and dichloromethane fumes. The structural and mechanistic aspects of the observations are also discussed.     

聚苯胺电致变色薄膜在不同颜色区间的电化学循环稳定性研究

本文采用电位阶跃和循环伏安法结合紫外可见光光度法研究了聚苯胺薄膜的电致变色性质. 聚苯胺薄膜颜色多变,颜色在浅黄色到绿色再到蓝色之间变化,本文研究在不同的颜色变化区间内聚苯胺薄膜的电化学循环稳定性. 研究结果表明,薄膜在黄色到蓝色(0.4 V ~ 1.2 V)以及绿色到蓝色(0.8 V ~ 1.2 V)区间变化时,电致变色循环性能较差,而在黄色和绿色(0.4 V ~ 0.8 V)之间变化时循环稳定性能良好,着色时间为4.5 s,着色效率高达159.48 cm²·C^-1.     

Printable optical sensors based on H-bonded supramolecular cholesteric liquid crystal networks

A printable H-bonded cholesteric liquid crystal (CLC) polymer film has been fabricated that, after conversion to a hygroscopic polymer salt film, responds to temperature and humidity by changing its reflection color. Fast-responding humidity sensors have been made in which the reflection color changes between green and yellow depending on the relative humidity. The change in reflection band is a result of a change in helix pitch in the film due to absorption and desorption of water, resulting in swelling/deswelling of the film material. When the polymer salt was saturated with water, a red-reflecting film was obtained that can potentially act as a time/temperature integrator. Finally, the films were printed on a foil, showing the potential application of supramolecular CLC materials as low-cost, printable, battery-free optical sensors.     

Optical Properties of Swift Heavy Ion Beam Irradiated Polycarbonate/Polystyrene Composites Films

Polycarbonate/polystyrene composites films were irradiated by 55 MeV Carbon ion beam with fluence ranging from 1 × 10¹¹ to 1 × 10¹³ ions/cm². The polymer composites films were prepared by solution mixing method. The effects of ion beam on structural, optical and surface morphology of PC/PS composites films were investigated by X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis), Fourier Transform Infrared Spectroscopy (FT-IR) and Optical Microscope. The XRD pattern shows the average crystallite size, percentage of crystallinity and inter-chain separation, which decreases with increase in ion fluences. UV-vis spectra show that the energy band gap and transmittance decreases while number of carbon atoms increases with fluences. The FT-IR spectra evidenced very small change in cross linking and chain scissoring at high ion fluences, while the optical microscopy shows a color change with ion fluence.