多金属氧酸盐催化苯甲醇的选择性氧化：一个绿色可循环的高效催化氧化体系

以Keggin结构的几类杂多酸和三乙胺（TEA）为原料,通过简单的酸碱反应合成了相应杂多酸的TEA盐。 并以它们作为催化剂,30％H2O2作氧化剂,在不使用长链相转移剂的条件下,研究了它们催化苯甲醇选择氧化制备苯甲醛的反应性能。 结果表明,该类催化剂在苯甲醇的选择氧化反应中具有比相应杂多酸更高的催化活性或选择性。 其中[TEAH]H2PW12O40为最佳催化剂,在适宜的反应条件下,该催化剂上苯甲醇转化率可达99.5％以上,苯甲醛选择性达~100％。 催化剂可以被分离和循环使用多次,活性、选择性基本不变。 用水作溶剂,避免了有机溶剂的使用,是一个高效、绿色的苯甲醛选择氧化体系。     

Keggin杂多酸负载型催化剂研究及在有机合成中的应用

评述了负载型杂多酸Keggin结构催化剂的制备、表征及其表面作用机理, 阐述了在非均相催化酯化反应、Friedel-Crafts烷基化和酰基化反应、选择氧化、不对称催化反应、异构化反应、缩合反应、裂解反应、水合反应、脱水反应、水解反应、重排反应、Diels-Alder反应及醚化反应等作为探针反应的催化性能, 总结了重排反应、醇氧化等不同类型催化反应的反应机理和催化剂失活的主要原因以及影响负载型催化剂水热稳定性能的因素, 指出了负载型杂多酸Keggin结构催化剂研究中有待解决的问题及今后的发展方向..     

丙烷选择氧化制丙烯醛催化剂中Ce的作用

考察了一系列助剂如:Cu、Zn、Mn、W、Ce、Pr、Nd等对Ag-Mo-P-O催化剂丙烷选择氧化制丙烯醛的影响.其中添加助剂Ce的Ag-Mo-P-O催化性能较好.添加Ce降低了丙烷氧化反应的活化能并有利于中间产物丙烯转化为丙烯醛.采用BET、XRD、H2-TPR、O2-TPD、C3H8-TPD和EPR等方法,研究了含Ce催化剂的结构和性质.结果表明,助剂Ce改善了催化剂的可还原性,并调变了催化剂中Mo5＋/Mo6＋比例,有利于催化剂上丙烷选择氧化生成丙烯醛,这可能归因于催化剂中形成Ce3＋＋Mo6＋Ce4＋＋Mo5＋氧化-还原循环的缘故.     

结构原子组成对Keggin型杂多酸铯盐上丙烷选择氧化性能的影响

系统地研究了具有不同结构原子组成的Keggin型杂多酸铯盐上丙烷选择氧化性能,重点考察了H3+n-xCsxPMo12-nVnO40(n=0-4,x=0-3)系列化合物以及H0.5Cs2.5PW12O40,H1.5Cs2.5PW11VO40和H1.5Cs2.5SiMo12O40样品.应用BET,UV-Vis,FTIR,XRD,TPR和SEM等手段研究了催化剂的物化性质.V取代Mo增加了H3+nPMo12-nVnO40(n=0-4)系列杂多酸的酸量和氧化性能.Cs+对质子的取代调变了样品的表面酸性以及氧化还原性,同时催化剂的热稳定性也随着Cs+取代数的递增而增强,当Cs+的取代数达到2以上时催化剂的热稳定性较好.Cs+取代对H3+n-xCsxPMo12-nVnO40(n=0-4,x=0-3)催化剂上丙烷选择氧化性能有重要影响.随着一级结构中V5+取代数目的增多,可能的Cs+取代数目相应减少;而对丙烯酸的选择性则存在一适宜的Cs+取代数目.Keggin型杂多阴离子的结构原子组成及平衡离子的种类和数量决定了其酸性、氧化还原性和热稳定性,这是影响该类催化剂上丙烷选择氧化性能的首要因素.研究结果表明,以P为中心原子,以Mo和V为配位原子的杂多酸铯盐[x(Cs+)=2.5]具有较好的催化性能.     

Te掺杂对MoPO/SiO2催化剂上丙烷选择氧化制丙烯醛反应的影响

 考察了Te的添加及Te含量对MoPO/SiO2催化剂催化丙烷选择氧化制丙烯醛反应性能的影响. MoPO/SiO2催化剂对丙烷选择氧化制丙烯醛反应的中间产物丙烯选择性较高,而Te的添加促进了丙烯向丙烯醛的转化. N2吸附、XRD、Raman、XPS、H2-TPR、丙烷脉冲、NH3-TPD和Py-IR等实验结果表明,催化剂添加Te后虽然比表面积有所下降,但单位比表面积上的酸量增加,催化剂低温可还原性得到改善,从而有利于丙烷的转化. Te可能有利于丙烯α-H的脱除和/或烯丙基的插氧反应.     

高比表面介孔MoVTeNbO催化剂的制备及其催化性能

采用水热法添加模板剂十六烷基三甲基溴化铵(CTAB)和配合剂柠檬酸(CA)制备了Mo VTe Nb O系列催化剂,并将其应用于丙烯一步氧化制备丙烯酸的反应.结果表明,CA的添加量对催化剂的形貌、孔结构、比表面积及催化性能具有明显的影响.当n(CA)/n(Mo)=0.36时,Mo VTe Nb O催化剂为介孔纳米催化剂,其平均孔径为4.9 nm,具有较高的比表面积(37.8 m2/g)和较小的催化剂晶粒(粒径范围为10~16 nm),与常规水热法制备的催化剂相比,Mo VTe Nb O介孔纳米催化剂的晶粒变小、催化性能得到了显著提高,丙烯一步氧化制丙烯酸的转化率可由53.9%提高至71.2%,丙烯酸收率可提高到45.8%.     

BiMo基复合氧化物催化剂晶格氧性质与丙烷选择氧化性能

研究了不同组成、结构的BiMo基复合氧化物催化剂的丙烷选择氧化至丙烯醛的性能.X射线衍射(XRD)、X光电子能谱(XPS)、原位傅里叶变换激光拉曼光谱(FT-LRS)、电子顺磁共振(ESR)等多种表征结果表明,BiMo基复合氧化物催化剂上丙烷经由中间物丙烯选择氧化至丙烯醛,催化剂的晶格氧为选择性活性氧物种.丙烷直接氧化下丙烷至丙烯醛的选择性和收率与催化剂的Mo=O物种的氧化-还原性质密切关联,而Mo=O物种的性质又取决于Mo离子的配位环境,Mo=O物种的选择性转化丙烷经由丙烯至丙烯醛活性随畸变MoO6八面体、共顶点八面体、共边八面体、MoO4四面体配位环境递增.组成、结构优化调变的催化剂上丙烷选择氧化至丙烯醛选择性和收率可达45%和13.5%,催化剂中具有选择氧化活性的晶格氧物种数可达258 μmol/g.     

丙烷选择氧化催化剂AgMoO2PO4*MoO3活性表面结构研究

丙烷选择氧化制丙烯、丙烯醛 (酸 )是低碳烷烃优化利用的重要催化课题 .这类反应中烷烃的高效活化和定向转化很难兼得 .阐明有关催化剂的体相和活性表面结构具有重要意义[1～ 3] .由于受原位实验技术的限制 ,相关研究较少 [4 ,5] .本文采用原位共焦显微拉曼光谱、XRD及 XPS技术考察了丙烷选择氧化催化剂 Ag Mo O2 PO4 · Mo O3的活性表面结构 .1　实验部分1 .1　催化剂的制备　Ag Mo O2 PO4 ·Mo O3以 Ag2 O,Mo O3和 (NH4 ) H2 PO4 粉末为原料 ,采用湿混合法制备 :将上述原料加入适量的去离子水充分混合 ,在 1 1 0℃烘干 ,在 55…     

MOPO/SiO2催化剂上丙烷选择氧化制丙烯醛反应机理

 考察了丙烷以及丙烷选择氧化反应的有关中间体或其探针分子(如丙烯、烯丙醇、异丙醇和正丙醇)和产物(如丙烯醛、丙酮和丙醛)在MoPO/SiO2催化剂上的反应行为,用以探明该催化剂上丙烷选择氧化制丙烯醛反应的可能路径. 结果表明,异丙氧基是MoPO/SiO2催化剂上丙烷选择氧化制丙烯醛反应的主要中间体,异丙氧基脱β-H生成丙烯或脱α-H生成丙酮,而丙烯则经σ-氧烯丙基转化为丙烯醛.     

钼钒砷三元杂多酸氧化还原性能研究

杂多酸应用十分广泛 ,作为催化剂是迄今为止的一项最广泛、最重要、最具前途的应用。已经用杂多化合物作为催化剂实现工业化的大型项目有八个[1] ,创造了良好的经济效益和社会效益。杂多酸具有酸性和氧化性 ,作为酸型、氧化型或双功能催化剂 ,应用于许多均相和多相催化反应中。其中 ,具有 Keggin结构的杂多酸显示出良好的催化活性 ,是被广泛应用的酸种之一。杂多酸组成元素众多 ,可以通过调变元素的组成和比例来调变其氧化还原性 ,以适应各种不同的催化需要 ,这对于开发新型催化剂具有重要意义。本文合成了四种钼钒砷三元杂多酸 ,经表征确…     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.