Crystallographic characterisation of Ti(IV) piperazine complexes and their exploitation for the ring opening polymerisation of rac-lactide

In this paper a series of eight Ti(IV) piperazine based complexes have been prepared and fully characterised in the solid-state by X-ray crystallography and in solution via NMR spectroscopy. In the solid-state either Ti(2)(L)(O(i)Pr)(6) or Ti(2)(L)(2)(O(i)Pr)(4) were observed depending upon the nature of the starting ligand. For complexes with less sterically demanding ligands (1H(2) and 2H(2)) an equilibrium was observed: 2 Ti(2)(L)(O(i)Pr)(6) ? Ti(2)(L)(2)(O(i)Pr)(4) + 2 Ti(O(i)Pr)(4). The thermodynamic properties (ΔG, ΔH and ΔS) have been investigated via variable temperature NMR spectroscopy. With more sterically demanding ligands (3-8H(2)) the Ti(2)(L)(O(i)Pr)(6) form was the most prevalent in the solid-state and in solution. These complexes have been tested for the production of polylactide under melt and solution conditions with high conversions being obtained.     

Titanium-salen complexes as initiators for the ring opening polymerisation of rac-lactide

A family of bis(iso-propoxide) titanium(IV) complexes supported by tetradentate Schiff base (salen) ligands has been synthesised and characterised, including a structural determination of N,N'-bis(6'-methylenimino-2',4'-di-tert-butylphenoxy)cyclohexyl-(1R,2R)-diamino titanium(IV) bis(iso-propoxide). Their suitability for initiating the ring-opening polymerisation of rac-lactide has been investigated. Polymerisation activities are shown to correlate with the electronic properties of the substituents within the salen ligand. In contrast to aluminium-salen initiators, electron-withdrawing substituents on the Schiff base ligand have a detrimental influence upon polymerisation activities, whereas the use of electron-donating alkoxy-functionalized ligands has allowed the highest recorded activity to date for a titanium-based initiator.     

A high-throughput approach to lanthanide complexes and their rapid screening in the ring opening polymerisation of caprolactone

Libraries of lanthanide complexes supported by nitrogen and oxygen containing ligands have been synthesised using a high-throughput approach. The complexes were employed in the ring-opening polymerisation of epsilon-caprolactone, in some cases giving polycaprolactone of controlled molecular weight and narrow polydispersity. The libraries, based on twenty-one ligands and eight lanthanide reagents, were developed in order to determine the best combination of lanthanide metal and ligand. They were prepared via transamination reactions of [Ln[N(SiMe(3))(2)](3)] complexes with tetradentate dianionic ligands containing oxygen and nitrogen donors. 1H NMR spectroscopy was used to screen polymerisation activity. The steric demand of the ligand has a significant effect on the polymerisation process, as do the type of nitrogen donor and the size of the central Ln(3+) ion. Ligands containing aryl rings with bulky substituents such as tert-pentyl groups afforded species capable of performing controlled polymerisation of caprolactone, whereas less bulky groups such as methyl were not effective. Yttrium and mid-sized lanthanides such as samarium showed increased activity compared with the larger lanthanides, lanthanum and praseodymium, and the smaller lanthanides like ytterbium. X-ray crystal structures of a sterically demanding chelating amine-bis((2-hydroxyaryl)methyl) ligand and a chloride bridged dinuclear gadolinium complex are reported. The centrosymmetric molecule contains gadolinium in distorted capped trigonal prismatic environments bonded to two amine, two phenolate, one THF and two chloride donors.     

Cationic and charge-neutral calcium tetrahydroborate complexes and their use in the controlled ring-opening polymerisation of rac-lactide

The first cationic main group tetrahydroborate complexes are reported. [Ca(BH(4))(THF)(5)][BPh(4)] and the charge neutral (Tp((t)Bu,Me))Ca(BH(4))(THF) are initiators for the living ring opening polymerization of rac-lactide, the latter producing PLA with high levels of heterotactic enrichment. These represent a new class of ROP initiators for main group metals.     

Group 4 complexes of amine bis(phenolate)s and their application for the ring opening polymerisation of cyclic esters

A series of amine bis(phenolate) ligand precursors and their group 4 metal complexes have been prepared, characterised by single-crystal X-ray diffraction, and tested for ring opening polymerisation of epsilon-caprolactone.     

Heterogeneous catalysts for the controlled ring-opening polymerisation of rac-lactide and homogeneous silsesquioxane model complexes

In this communication we report, for the first time, the ring-opening polymerisation in the melt of rac-lactide with heterogeneous catalysts. Homogeneous model systems based on silsesquioxanes have been prepared for comparison.     

Simultaneous enzymatic ring opening polymerisation and RAFT-mediated polymerisation in supercritical CO2

This report presents the first simultaneous, metal-free synthesis of block copolymers through combination of enzymatic ring-opening polymerisation of epsilon-caprolactone with RAFT-mediated controlled radical polymerisation of styrene.     

Well-defined crosslinked materials via ring opening metathesis polymerisation

The work reported here is part of our ongoing programme of work directed. towards the synthesis and characterisation of polymeric materials via ROMP-RIM and ROMP-RTM. It describes the synthesis and characterisation of well-defined linear and crosslinked polymeric materials via ROMP-RTM. The process involves in-mould polymerisation of monofunctional imidonorbornene monomers, with different alkyl side chain lengths, to give a range of linear polymers. The process also involves in-mould copolymerisation of monofunctional imidonorbornene monomers, with different alkyl side chain lengths and difunctional monomers with different alkylene spacer lengths, to produce well-defined crosslinked polymers. The glass transition temperature (T_g) of the linear polymers was found to depend on the length of the alkyl side chain. For the crosslinked materials the results show that as the percentage of the difunctional, crosslinking unit, is increased (1, 5 and 10 molar percentage of the difunctional monomer) the glass transition shifts to a higher temperature, the height of the tanδ peak decreases and the plateau shear modulus above T_g increases. These results are as expected for an increase in the crosslink density of a polymer.     

Ring-opening polymerisation of rac-lactide mediated by cationic zinc complexes featuring P-stereogenic bisphosphinimine ligands

The diastereomerically pure P-stereogenic bis(phosphinimine) ligands 4,6-(ArN[double bond, length as m-dash]PMePh)(2)dbf [Ar = 4-isopropylphenyl (Pipp): rac-4, meso-4; Ar = 2,6-diisopropylphenyl (Dipp): rac-4a; dbf = dibenzofuran] were synthesised and complexed to zinc using a protonation-alkane elimination strategy. The cationic alkylzinc complexes thus obtained, RZn[4,6-(ArN[double bond, length as m-dash]PMePh)(2)dbf][B(Ar')(4)] [Ar = Pipp, Ar' = C(6)H(3)(CF(3))(2): rac-6 (R = Et), meso-6 (R = Et), rac-7 (R = Me) meso-7 (R = Me); Ar = Dipp: rac-6a (R = Et, Ar' = C(6)H(3)(CF(3))(2)), rac-6b (R = Et, Ar' = C(6)F(5))] were investigated for their competency as initiators for the ring-opening polymerisation of rac-lactide. The formation of polylactide was achieved under relatively mild conditions (40 °C, 2-4 h) and the microstructures of the resulting polymers exhibited a slight heterotactic bias [polymer tacticity (P(r)) = 0.51-0.63].     

Multinuclear alkylaluminium macrocyclic Schiff base complexes: influence of procatalyst structure on the ring opening polymerisation of epsilon-caprolactone

Two remote dialkylaluminium centres supported by a macrocyclic Schiff base ligand exhibited beneficial cooperative effects, whilst aluminoxane-type bonding proved to be detrimental to activity for the ring opening polymerisation of epsilon-caprolactone.     

New reactivity of the uranyl ion: ring opening polymerisation of epoxides

The uranyl aryloxide, [UO(2)(OAr)(2)(THF)(2)], and uranyl chloride, [UO(2)Cl(2)(THF)(3)] or [UO(2)Cl(2)(THF)(2)](2) act as pre-catalysts for the ring opening polymerization of propylene oxide and cyclohexene oxide. Coordination of the monomers has been investigated using (1)H EXSY spectroscopy and kinetic and thermodynamic parameters reported. NMR analyses of the polymers suggest a bimetallic mechanism for the polymerization.     

Robust chiral zirconium alkoxide initiators for the room-temperature stereoselective ring-opening polymerisation of rac-lactide

Chiral Schiff bases (1H to 4H) and a series of their Group 4 metal alkoxide complexes [(R-1)2Ti(O(i)Pr)2, (R-2)2Ti(O(i)Pr)2, (R-1)(2)Zr(O(i)Pr)2, (R-2)2Zr(O(i)Pr)2, (R-3)2Zr(O(i)Pr)2, (R-4)2Zr(O(i)Pr)2, (S-1)2Zr(O(i)Pr)2 and (rac-1)2Zr(O(i)Pr)2] have been prepared and characterised by 1H, and 13C NMR spectroscopy. In solution, both Lambda and Delta isomers were observed, suggesting a low degree of chiral induction from the ligand. One ligand (R-4H) and three complexes [Delta-(R,R-2)2Ti(O(i)Pr)2, Lambda-(R,R-1)2Zr(O(i)Pr)2 and Delta-(R,R-3)2Zr(O(i)Pr)2] have also been characterised by single crystal X-ray diffraction. All complexes were found to have a pseudo-octahedral alpha-cis geometry. The complexes were tested as initiators for the ring-opening polymerisation of rac-lactide in solution and in the melt. The titanium complexes are inactive in solution and afford atactic polylactide in the melt. Zr(iv) complexes afford heterotactically enriched polylactide both in toluene solution (at 20 degrees C and 80 degrees C) and in the melt. Polymerisations were generally found to be well-controlled, giving predictable molecular weights and low molecular weight distributions. Ligand variation (substituents and/or chirality) has little effect on either the activity or selectivity of initiators. Zirconium initiators were found to be unusually robust as they were able to maintain well-controlled polymerisation following addition of water to reactions in solution and when using unpurified monomer for reactions in the melt.     

Synthesis and X-ray structures of new titanium(IV) aryloxides and their exploitation for the ring opening polymerization of epsilon-caprolactone

A series of titanium catecholates have been prepared and characterized by single-crystal X-ray diffraction studies. Complexes 1a-7a were synthesized by the reaction of 1 equiv of ligand with Ti(OiPr)4. All are dimers in the solid-state, in which a catechol bridges between two titanium centers. Electronic (nitro and methoxy groups) and steric (tert-butyl groups) effects of the ligand have been investigated. Complex 1b was synthesized by reaction of 2 equiv of ligand with Ti(OiPr)4. A dimer is again observed with the same bridging ligand together with a terminal catechol moiety. All complexes contain a coordinated 2-propanol ligand on each titanium center forming pseudo-octahedral metal centers. All complexes were tested for the ring-opening-polymerization of epsilon-caprolactone to afford polycaprolactone (PCL). Reasonable yields (up to 79%) were obtained at room temperature, and narrow molecular weight distributions (1.13-1.27) were observed for the PCL produced. The most active complex was found to be complex 1a, containing unsubsituted catechol ligands.     

Zinc(II) silsesquioxane complexes and their application for the ring-opening polymerization of rac-lactide

In this Communication, we report the unprecedented solid-state structures for a series of zinc(II) silsesquioxane complexes. Initial catalytic data for the ring-opening polymerization of rac-lactide are also presented together with analogous heterogeneous species.     

Zinc anilido-oxazolinate complexes as initiators for ring opening polymerization

Three new anilido-oxazolines, ortho-C(6)H(4)(NHAr')(4,4-dimethyl-2-oxazoline) [Ar'=2,4,6-trimethylphenyl, HNPh(TriMe)Oxa (1); 2,6-diisopropylphenyl, HNPh(DiiPr)Oxa (2); 2-methoxyphenyl, HNPh(OMe)Oxa (3)], have been prepared. Reactions of 1 or 2 with one molar equivalent of ZnEt(2) in tetrahydrofuran or hexane solution give the zinc ethyl complexes (NPh(TriMe)Oxa)ZnEt (4) and (NPh(DiiPr)Oxa)ZnEt (5). The dinuclear zinc benzyloxide complexes, [(NAr'Oxa)Zn(mu-OBn)](2), [Ar'=2,4,6-trimethylphenyl, (6); 2-methoxyphenyl, (7)], were synthesized by the reaction of 4 with one molar equivalent of benzyl alcohol in tetrahydrofuran solution (for 6) or by treatment of with 3 one molar equivalent of ZnEt(2) in tetrahydrofuran solution followed by the addition of one molar equivalent of benzyl alcohol (for 7). The molecular structures are reported for compounds 6 and 7. Their catalytic activities toward the ring opening polymerization reactions are under investigation.     

Novel co-catalytic activity of zinc metal with classical initiators for the ring opening polymerisation of norbornene

Zinc metal was shown to considerably increase the activity of the metal(III) chloride salts of ruthenium, iridium and osmium as metathesis initiators for the ROMP of norbornene. The stereochemistry of the polymers formed was determined by ¹H and ¹³C NMR. Formation of the initial carbene species is not via the normally accepted vinyl hydride mechanism. An alternative mechanism involving a metallacyclopentane intermediate is postulated.     

Oxirane ring opening reactions with thiols catalyzed by lanthanide complexes

LnCl₃ (Ln = Ce,Sm) and Eu(fod)₃ act as Lewis-acid catalysts in stereo- and regioselective epoxide ring opening reactions with thiols under mild conditions in CH₂Cl₂.     

Hydrolytic ring opening reactions of anhydrides for first row transition metal dicarboxylate complexes

Ring opening reactions of 2,3-pyridine dicarboxylic anhydride are studied with hydrated salts of cobalt, nickel and zinc. The hydrated metal salts preferentially hydrolyze 2,3-pyridine dicarboxylic anhydride rather than causing esterification in methanol medium. Hydrolytic opening of 2,3-pyridine dicarboxylic anhydride by hydrated cobalt(II) acetate and nickel(II) acetate resulted in the corresponding chelate complexes of monodeprotonated 2,3-pyridine dicarboxylic acid. The reaction of copper acetate with pyromellitic dianhydride in the presence of 1,10-phenanthroline gives a dinuclear copper complex whereas a similar reaction with copper(II) chloride gives a mononuclear copper complex.