Bismuth-film-plated carbon paste electrodes

In this preliminary note, carbon paste electrodes (CPEs) plated with a bismuth film are presented. The bismuth film can be generated onto the carbon paste surface either from an external plating solution or in situ; the latter being performed in two ways: (i) as a spike of the Bi³⁺ ions to the solution or (ii) via modifying the carbon paste with solid bismuth oxide (5% m/m). As shown on selected examples, bismuth-film-plated CPEs exhibit a good performance in voltammetric stripping analysis of some heavy metals such as Pb, Cd, and Zn.     

Preconcentration and voltammetric measurement of mercury with a crown-ether modified carbon-paste electrode

Carbon-paste electrodes modified with crown-ethers were constructed by mixing the crown-ethers into a graphite powder/Nujol oil matrix. The electrodes so formed were able to bind mercuric ions chemically, and gave greater voltammetric response to mercury than that of ordinary carbon-paste electrodes. The response was characterized with respect to paste composition, crown-ether, preconcentration period, mercury concentration, reproducibility, possible interferences, and other variables. Best results were obtained with 18-crown-6 and an acetate buffer (pH 4.0). The electrode gave good linearity for 1 x 10(-5)-6 x 10(-6)M mercury, a detection limit of 2 x 10(-6)M, and a relative standard deviation of 11%. The investigation may lead to a new class of modified (complexing) electrodes, with different patterns of reactivity.     

Electroanalytical Study of the Antioxidant and Antitumor Agent Curcumin

Curcumin (CU) shows a wide range of pharmacological properties including antioxidant, anti‐inflammatory, and antitumor effects. In order to understand the chemical basis of different activities of curcumin, we have studied the oxidation and reduction of curcumin. Based on cyclic and differential pulse voltammetric methods, using carbon paste and hanging mercury drop electrodes, in the present study we tested different parameters to optimize the conditions for the determination of curcumin and its electrochemical characteristics. Better results were obtained via differential pulse voltammetry using carbon paste electrode. Curcumin yields well‐defined differential pulse voltammetric responses with well‐defined oxidation (in the potential region of 0.3–0.6 V, vs. Ag/AgCl) and reduction (at 0.3 V) peaks using carbon paste electrode.     

Carbon Paste Electrodes Modified with Graphene Oxides – Comparative Electrochemical Studies of Thioguanine

The voltammetric study of thioguanine (TG) was comparatively investigated on bare, graphene oxide and reduced graphene oxide modified carbon paste electrodes using cyclic (CV) and square wave stripping (SWSV) voltammetric techniques. Depending on the working electrode and pH of supporting electrolyte, characteristic electrochemical behaviour of thioguanine was established and the mechanism of TG oxidation was suggested. Based on the obtained results, the new voltammetric method for TG determination in buffer solutions and pharmaceutical formulation was developed. Atomic force microscopy was used to characterize electrodes surfaces.     

Electrochemical Behavior and Determination of Nicardipine

Abstract

The voltammetric behavior and measurement of nicardipine at the glassy carbon, carbon paste and hanging mercury drop electrodes are discussed. Cyclic voltammetry is used to elucidate the redox mechanism. Nicardipine is shown to adsorb on carbon electrodes, with the surface species retaining its electroactive characteristics. The adsorptive accumulation serves as a preconcentration step which improves the voltammetric measurement with respect to selectivity and sensitivity. Coupling this with a medium-exchange step eliminates interferences due to solution-phase electroactive species and permits direct measurement in urine. The inherent sensitivity of differential pulse voltammetry at the mercury electrode permits convenient measurement at the submicromolar level, with detection limit of 2 × 10^?8M. Amperometric detection for a flow injection system is illustrated.     

Graphite multi-micro-disc based mercury film electrode: Comparison of experimental and theoretical anodic stripping results

an ensemble of properly distanced micro mercury film electrodes (MMFE) was used in cyclic and anodic stripping voltammetry. the experimental results were compared with the anodic stripping theory, and the agreement was found to be satisfactory. The MMFE peaks (calculated per unit area) were higher, thinner and shifted towards more negative potentials compared with the large area mercury film electrode (LAMFE) peaks.The initial graphite electrode consisted of 65 independent micro-discs forming a circle, and was prepared from carbon fibres 4.66 μm in radius. The graphite multi-micro-disc electrode was quantitatively checked in a Fe(CN)₆^3? solution under both chronoamperometric and voltammetric conditions. The deposition and oxidation of mercury is discussed also.     

Manganese oxide thin films prepared by potentiodynamic electrodeposition and their supercapacitor performance

Manganese oxide film for supercapacitor applications was prepared by potentiodynamic electrodeposition in a manganese acetate plating solution. The effects of the potential sweep rate on the oxide microstructure, crystallinity, and chemical states were examined using a scanning electron microscope, an X-ray diffractometer, and an X-ray photoelectron spectrometer, respectively. Electrochemical performance of the film electrodes was evaluated using a cyclic voltammetric measurement. The experimental results indicate that the deposition potential sweep rate significantly affected the material properties of the prepared oxide films. The oxide-specific capacitance increased from 262 to 337 F/g when the sweep rate was increased from 100 to 400 mV/s. The key material factors that govern the specific capacitance and cyclic stability of the oxide electrodes were discussed.     

Chemical accumulation and voltammetric determination of traces of nickel(II) at glassy carbon electrodes modified with dimethyl glyoxime containing polymer coatings

The objective of the present study was to develop a solid mercury free electrode for the voltammetric determination of traces of nickel(II) in solution. For this purpose chemically modified electrodes (CME's) were constructed from glassy carbon coated with dimethylglyoxime-containing polymers. CME's based on a composite matrix, which contained polyvinyl chloride, polyaniline, and dimethylglyoxime were shown to possess the ability to accumulate traces of nickel(II) from ammonia buffered aquatic solutions by a purely chemical attachment. Moreover the nickel(II) contents of such solutions could be determined using voltammetric quantitation of the nickel(II) dimethylglyoximate deposits on the CME surfaces and the standard addition technique. The CME surfaces could subsequently be regenerated by acid treatment. The limit of detection for Ni(II) following a 240 s chemical deposition was estimated as 18 mug Ni l(-1), and the CME results for traces of Ni(II) in fresh water compared well with the results obtained by atomic absorption spectroscopy. Moreover the CME's retained their sensitivity for more than two days, i.e. significantly longer than the 3 h, during which analogous carbon paste electrodes completely lost their affinity to nickel(II).     

Stripping voltammetry in environmental and food analysis

The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry. Received: 30 March 2000 / Revised: 30 May 2000 / Accepted: 6 June 2000     

Improvement of alternariol monomethyl ether detection at gold electrodes modified with a dodecanethiol self-assembled monolayer

The electro-oxidation of alternariol monomethyl ether (AME), one of the main metabolites of the Alternaria genus mycotoxins, is studied at 1-dodecanethiol (DDT)-modified gold electrodes, in acetonitrile (ACN) – aqueous phosphate buffer solutions of different pH values, by using cyclic (CV) and square-wave (SWV) voltammetries. The AME voltammetric response at the bare electrode suffers from two drawbacks: it appears at potentials close to the onset of gold oxide formation, and it is hampered by a fouling of the electrode surface due to the accumulation of oxidized products. These shortcomings are circumvented by the use of DDT-coated electrodes, since the intervening monolayer inhibits gold oxide formation and surface passivation by the electrochemical products, without affecting the oxidation kinetics of AME significantly. Diagnostic criteria based on the voltammetric peak parameters show that the electrochemical behavior of AME at the modified electrode is mainly controlled by reactant diffusion from solution, with a weak adsorption of both the mycotoxin and its oxidation products at monolayer defects. Calibration curves were constructed from the AME square-wave voltammetric response and a detection limit of 9.1 × 10⁻⁸ mol dm⁻³ was determined, which is about three times smaller than a previous estimate at platinum and glassy carbon electrodes, and about fifty times smaller than the limit derived from measurements carried out at a polyphenol oxidase-modified carbon paste electrode.     

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The thickness of the films formed is found to be limited to several monolayer equivalents. The photochromic properties and stability of the polymer films have been investigated by UV/vis spectroscopy, electrochemistry, and XPS. Although the films are electrochemically and photochemically stable, their mechanical stability with respect to adhesion to the electrode was found to be sensitive to both the solvent and the electrode material employed, with more apolar solvents, glassy carbon, and ITO electrodes providing good adhesion of the polymer film. The polymer film is formed consistently as a thin film and can be switched both optically and electrochemically between the open and closed state of the photochromic dithienylethene moiety.     

Accumulation and voltammetric determination of cobalt at zeolite-modified electrodes

Chemically modified electrodes based on zeolite-containing graphite pastes were constructed and evaluated as sensor electrodes for the voltammetric determination of trace cobalt in solution. Zeolite molecular sieves with pore sizes of 3, 4, and 5 Å were all suitable for chemical deposition and subsequent voltammetric quantitation of trace Co(II). In order to cover a large range of parameters, the investigations were carried out using three zeolites (A, X, and Y), selected for their different cation-exchange capacities and ion-sieving properties. The analytical scheme, “preconcentration/voltammetric detection” for the determination of cobalt(II) species using zeolite-modified carbon paste electrodes (ZMCPE) was chosen. Compared to the corresponding unmodified electrodes, improvements in sensitivity were observed when using ZMCPEs due to analyte accumulation at the electrode’s surface by ion exchange in zeolite particles. The detection limit obtained for Co(II) was 3 ppm following 15 min of chemical deposition. A good correlation was found between the results obtained by ion exchange voltammetry and conventional ion-exchange characterization.     

Voltammetry of osmium-modified DNA at a mercury film electrode: application in detecting DNA hybridization

Mercury film electrodes (MFE) have recently been used in nucleic acid electrochemical analysis as alternatives to the classical mercury drop ones. DNA modified with osmium tetroxide, 2,2'-bipyridine (Os,bipy) can be detected with a high sensitivity at mercury electrodes via measurements of a catalytic osmium signal. In this paper we show that mercury film on a glassy carbon electrode can be used in voltammetric analysis of Os,bipy-modified DNA. Application of the MFE as a detection electrode in double-surface electrochemical DNA hybridization assay involving osmium labeling of target DNA is demonstrated.     

Adsorptive Stripping Voltammetric Measurements of Trace Molybdenum at the Bismuth Film Electrode

Bismuth‐film electrodes on glassy‐carbon substrates have been successfully applied for adsorptive‐stripping voltammetric measurements of trace molybdenum in the presence of chloranilic acid (CAA). The procedure is based on the preconcentration of the molybdenum‐chloranilic acid complex at a preplated bismuth film electrode held at ?0.55 V (vs. Ag/AgCl), followed by a negatively‐sweeping square‐wave voltammetric scan. Factors influencing the adsorptive stripping performance, including different ligands, solution pH, CAA concentration, preconcentration time and potential, have been optimized. The response compares favorably with that observed at mercury film electrodes, and is linear over the 5–50 μg/L Mo concentration range (one min preconcentration). A detection limit of 0.2 μg/L molybdenum is obtained following a 10 min accumulation. High stability is indicated from the reproducible response of a 100 μg/L molybdenum solution (n= 60; RSD=2.6%). Applicability to seawater samples is demonstrated.     

Bismuth modified carbon-based electrodes for the determination of selected neonicotinoid insecticides

Two types of bismuth modified electrodes, a bismuth-film modified glassy carbon (BiF-GCE) and a bismuth bulk modified carbon paste, were applied for the determination of selected nitroguanidine neonicotinoid insecticides. The method based on an ex situ prepared BiF-GCE operated in the differential pulse voltammetric (DPV) mode was applied to determine clothianidin in the concentration range from 2.5 to 23 μg cm?3 with a relative standard deviation (RSD) not exceeding 1.5%. The tricresyl phosphate-based carbon paste electrodes (TCP-CPEs), bulk modified with 5 and 20 w/w% of bismuth, showed a different analytical performance in the determination of imidacloprid, regarding the peak shape, potential window, and noise level. The TCP-CPE with 5% Bi was advantageous, and the developed DPV method based on it allowed the determination in the concentration range from 1.7 to 60 μg cm?3 with an RSD of 2.4%. To get a deeper insight into the morphology of the bismuth-based sensor surfaces, scanning electron microscopic measurements were performed of both the surface film and the bulk modified electrodes.     

Electrochemical behaviour of carbon paste electrodes enriched with tin oxide nanoparticles using voltammetry and electrochemical impedance spectroscopy

The effect of the SnO(2) nanoparticles (SNPs) on the behaviour of voltammetric carbon paste electrodes were studied for possible use of this material in biosensor development. The electrochemical behaviour of SNP modified carbon paste electrodes (CPE) was first investigated by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. The performance of the SNP modified electrodes were compared to those of unmodified ones and the parameters affecting the response of the modified electrode were optimized. The SNP modified electrodes were then tested for the electrochemical sensing of DNA purine base adenine to explore their further development in biosensor applications.     

Stripping voltammetry in environmental and food analysis

The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry.     

Zeolite-modified solid carbon paste electrodes

New zeolite-modified carbon-based electrodes are described. They are based either on the physical anchoring of zeolite particles on the surface of solid carbon paste (the viscosity of which can be tuned by temperature change or controlled dissolution by an organic solvent), or on the dispersion of zeolite particles in the bulk of a carbon paste matrix containing solid paraffin as a binder. Both these systems display superior electrochemical performance in comparison to corresponding "classical" zeolite-modified carbon paste electrodes using mineral oil as binder. These well-described composites usually suffer from poor mechanical stability in stirred media as well as memory effects due to significant ingress of the external solution into the bulk electrode. Advantages of the zeolite-modified solid carbon paste electrodes are reported mostly on the basis of two electroanalytical applications: the voltammetric detection of Cu²⁺ ions after accumulation by ion exchange at open circuit, and the indirect amperometric detection of non-electroactive species (i.e. Na⁺) in flow injection analysis.     

Electrochemical Studies on New Chelating Compounds of the Mono‐ and Bis(imidazolyl)pyridine Type

Recently designed and synthetized mono‐imidazolinone (I and III) and bisimidazolinone (II and IV) chelating ligands were electrochemically characterized at mercury and carbon paste electrodes. Based on polarographic, voltammetric and coulometric investigations in buffered aqueous media, the general reduction pathway has been suggested. Reduction of the mono‐imidazolinone derivatives proceeds in acidic and neutral media in two two‐electron steps. In the first step, the 2,3‐C?N double bond of the imidazolone ring is reduced yielding a mixture of two diastereoisomers (V and VI). In the second step, the 2,3‐C? N single bond (in protonated form) is further reductively split and as the only final product the compound VII was formed. Both intermediates (V and VI) as well as the final product (VII) were prepared using controlled potential electrolysis on the first and second wave, respectively, isolated and identified by means of NMR. The reduction of bis‐derivatives proceeds most probably in an analogical way: in the first step, both imidazoles are reduced simultaneously at the same potential, whereas the following reduction (ring‐opening) proceeds stepwise. In the case of compound III, the covalent hydration of the parent compound takes place in acidic media, partially preventing its reduction. Finally, voltammetric behaviour of mono‐ and bisimidazolinones at carbon paste electrode is also discussed and, in prospect, possible electroanalytical applications outlined.     

Characteristics of Voltammetric Determination and Speciation of Chromium – A Review

This article reviews the voltammetric methods of chromium determination, including adsorptive and catalytic adsorptive stripping voltammetry at liquid mercury, metallic films, and modified carbon paste electrodes. The principle applications of the catalytic adsorptive stripping voltammetric method of chromium(VI) determination in the presence of DTPA and nitrate, most useful in the analysis of chromium traces and its speciation, is presented in detail. Special emphasis is put on the presentation and characterization of the voltammetric procedures which make it possible to conduction speciation studies of chromium(VI) in the presence of a great excess of chromium(III) and surfactants. This survey is based on 173 articles.