Experimental verification of the modified Gran methods applicable to redox systems

This study describes the application of the modified Gran I and II methods for determination of equivalence volume in redox titrations and for calibration, i.e. for determination of the correct slope of the redox indicator electrodes, which appears to be a major problem in using these electrodes. The four new versions of the Gran II method, denoted as MG(II)B, MG(II)C, MG(II)D and MG(II)E methods, in which the problem of calibration and determination of equivalence volume are considered simultaneously are suggested and compared with MG(I)S and MG(II)A methods known hitherto. All the methods are experimentally tested and discussed.     

Ensemble methods and data augmentation by noise addition applied to the analysis of spectroscopic data

Near-infrared spectroscopy has gained great acceptance in the industry due to its multiple applications and versatility. Sometimes, however, the construction of accurate and robust calibration models involves the collection of a large number of samples with related reference analysis that can complicate and prolong the calibration stage.In this paper, ensemble methods and data augmentation by noise simulation have been applied to spectroscopic data in combination with PLSR to obtain robust models able to handle different types of perturbations likely to affect NIR data. Several types of noise have been investigated as well as different ensemble methods focused on obtaining robust PLS models able to predict both the original and the perturbed test data.The suitability of ensemble methods to perform robust calibration models has been investigated and compared to extended multiplicative signal correction (EMSC) and other calibration approaches in a real case of temperature compensation. Extended multiplicative signal correction (EMSC) and ensemble methods seem to be the most appropriate methods yielding the best results in terms of accuracy and prediction ability with a reduced calibration data set.     

Numerical analysis of the Gran methods. A comparative study

The paper concerns mainly the modified Gran methods, considered as extrapolative standard addition methods. Particularly, the approximation:

     

Effects of Ligand Chain Length and Terminal N-Alkylation on the Protonation Constants and Stability Constants of Some Transition Metal Complexes of Linear Tetraaza and Pentaaza Ligands

A number of terminal N-alkylated linear tetraaza and pentaaza ligands were prepared. Their ligand protonation constants and some transition and post-transition metal (Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) complex stability constants were determined by potentiometric titration methods. In general, methylation and ethylation at the terminal nitrogen atoms caused the corresponding ligand nitrogen basicity to increase; however, the corresponding metal complex stabilities were decreased compared to the non-alkylated structural analogs, presumably due to a steric effect.     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.     

A potentiometric titration study on the dissociation of bile acids related to the mode of interaction between different head groups of nonionic surfactants with free bile salts upon mixed micelle formation in water

By constructing an elaborate set of potentiometric titration together with data analysis system, apparent acid dissociation indices (pK _a ^app ) for two bile acids were determined in the mixed surfactant system of bile salts (Sodium Deoxycholate, NaDC, and Sodium Chenodeoxycholate, NaCDC) with nonionic surfactants (Hexaethyleneglycol monon-dodecylether, C₁₂E₆, Decanoyl-N-methylglucamide, MEGA-10) in aqueous solution at ionic strength 1.5 as a function of mole fraction in the surfactant mixture. It was found that with increasing the bile salt concentration, pK _a ^app as well as pH showed an abrupt rise at a certain concentration of the bile salt being regardable as a critical micellization concentration (CMC) and reached a constant value at the range sufficiently higher than CMC for each pure bile salt system, meaning that the dissociation degree of carboxyl group in micelle is smaller than that in bulk. In the mixed systems of free bile salts with nonionic surfactants, the dissociation state of carboxyl groups in mixed micelles depends on the species of hydrophilic group of nonionic surfactants as well as on mole fraction in the surfactant mixture.     

Study on the relationship between intake of trace elements and breast cancer mortality with chemometric methods

Several chemometric methods were employed to survey the interaction among the trace elements and the relationship between the intake of these elements and the breast cancer mortality. It is indicated that there are strong interactions among the trace elements so as to form a dynamic balance; the intake of Cr is the most important factor that could cause the increase of breast cancer mortality; no definite relation can be observed between the intake of Cu and that of Zn. However, either the ratio of the intake of Cu and that of Zn or the intake of Cd could show a certain state of dynamic balance among some of the trace elements. Comparison of the analytical methods reveals that it is important to select a suitable method so as to obtain the most appropriate explanation.     

Spectrophotometric and titrimetric methods for the determination of nordiazepam in pure and pharmaceutical dosage form

A spectrophotometric method and two titrimetric methods for the determination of nordiazepam via its iodobismuthate complex are described. These methods depend on the reaction of nordiazepam with potassium bismuth iodide which give an orange precipitate. Determination of nordiazepam in the precipitated complex is done iodometrically using standard potassium iodate solution or complexometrically using standard EDTA solution and xylenol orange indicator. Alternatively, the complex is dissolved in ethanol and its absorbance is measured at 323 nm. The three methods were applied for the determination of reference samples of nordiazepam in the concentration range of 1–30 mg ml^?1 (for the iodometric method) and of 5–30 mg ml^?1(for the complexometric method) and of 0.04–3.2 mg ml^?1 (for the spectrophotometric method). The proposed methods were applied for the determination of nordiazepam in madar tablets and the validity of the proposed methods was assessed by applying the standard addition technique.     

微波消解高碳铬铁样品及其中铬硅磷的测定

提出了微波消解法溶解高碳铬铁。将粒径小于0.076 mm样品0.200 0 g置于消解罐中,加入高氯酸5 mL,氢氟酸1 mL,按设定程序消解。于消解所得溶液中加入饱和硼酸溶液5 mL后,定容至200 mL。分取100.0 mL溶液用过硫酸铵氧化,硫酸亚铁铵标准溶液电位滴定法测定其铬量。另分取50.00 mL溶液,用电感耦合等离子体原子发射光谱法测定硅及磷量,选择251.612,213.618 nm分别作为测定硅和磷的分析线。按此方法分析了3个标准样品,测得结果与认定值一致。铬、硅、磷3元素测定值的平均相对标准偏差(n=6)依次为0.09%,0.49%和2.2%。     

Thallimetric photochemical oxidation in titrimetric and spectrophotometric methods for the analysis of mixtures of oxalate and hydrogen peroxide

Thallium(III) in the presence of bromide photochemically oxidizes oxalate and hydrogen peroxide, whereas in the presence of a large excess of chloride, only oxalate is oxidized. Two procedures are based on these observations. In the titrimetric method (applied to mmol amounts of analytes) the thallium(I) formed is determined with bromate. In the spectrophotometric procedure (μmol amounts of analytes) unreduced thallium(III) is determined at 260 nm. In each case measurements are made after reaction under both conditions, so that both analytes can be determined.     

Use of chemometric and geostatistical methods to evaluate pesticide pollution in the irrigation and drainage channels of the Ebro river delta during the rice-growing season

Data sets obtained from quantitative analysis of seventeen pesticides in water samples from a network of irrigation and drainage channels in the Ebro river delta (Catalonia, NE Spain) have been analysed by chemometric and geostatistical methods. Samples were taken at fourteen locations during the main rice-growing season, from May to August 2005. Principal-component analysis enabled investigation of the spatial and temporal distribution of the main pollution patterns caused by application of pesticides in the region under study. A first pesticide-contamination pattern from the Ebro river was differentiated from a second more specific pattern from the water-drainage channels of the delta, collected from the rice fields. The seasonal peak in this more specific rice pesticide source was observed in July. Coupling the results from chemometric data analysis with use of geostatistical methods was shown to be a useful procedure for discovery of the most significant spatial and monthly variations of the main pesticide-contamination patterns, taking into account the particular geographical structure of the area under study.     

Application of chemometric methods to the simultaneous kinetic spectrophotometric determination of iodate and periodate based on consecutive reactions

A kinetic spectrophotometric method for the simultaneous determination of iodate and periodate in mixtures was proposed. The method is established on the different kinetic behaviours of the analytes which react with starch–iodide in the presence of sodium chloride in sulfuric acid medium. The kinetic data were collected from 260 to 900 nm every 10 nm, within a time range of 0–180 s at 1 s interval, and the absorbance collected at 291, 354 and 585 nm, respectively, increased linearly with the concentration between 0.1–1.2 mg L^− 1 for both iodate and periodate. The mechanism investigation revealed that the iodate/periodate–iodide–starch system is a consecutive reaction. Subsequently, the mathematical model for the quantitative kinetic determination based on the consecutive reactions by utilizing chemometric methods was deduced, and the simultaneous determination of synthetic mixtures of iodate and periodate was then applied. Kinetic data collected at 291, 354 and 585 nm, were processed by chemometric methods, such as classical least square (CLS), principal component regression (PCR), partial least square (PLS), back-propagation artificial neural network (BP-ANN), radial basis function–artificial neural network (RBF-ANN) and principle component–radial basis function–artificial neural network (PC-RBF-ANN). The results showed that calibration model with the data collected at 354 nm had some advantages for the prediction of the analytes as compared with the ones of other two wavelengths, and the PLS and PC-RBF-ANN gave the lower prediction errors than other chemometric methods. The proposed method was applied to the simultaneous determination of iodate and periodate in several real samples; and the standard addition method yielded satisfactory recoveries in all instances.     

Rapid titrimetric and spectrophotometric assay methods for the determination of lamivudine in pharmaceuticals using iodate and two dyes

One titrimetric and two spectrophotometric methods, which are simple, sensitive and rapid, are described for the assay of lamivudine in bulk drug and in tablet dosage forms using potassium iodate and two dyes, methyl orange and indigocarmine, as reagents. In titrimetry, an aqueous solution of lamivudine is titrated directly with iodate in an acidic medium, and in the presence of an excess of bromide using methyl orange as an indicator. After the decoloration of the red color of methyl orange, the residual bromine is titrated iodometrically to a starch endpoint. Spectrophotometric methods involve the addition of a known excess of iodate in an acidic medium and in the presence of an excess of bromide followed by the determination of residual bromine by the reaction with a fixed amount of either methyl orange and measuring the absorbance at 520 nm (method A), or indigo carmine and measuring the absorbance at 610 nm (method B). In all methods, the amount of iodate which reacted corresponds to the amount of lamivudine content. The titrimetric method is applicable over the 1.5–8.0 mg range. The systems obey Beer’s law for 0.5–5.0 μg/mL (method A) and 1.25–12.5 μg/mL (method B). The calculated apparent molar absorptivity values are found to be 3.3 × 10⁴ and 9.3 × 10³ L mol⁻¹ cm⁻¹, for method A and method B, respectively, and the corresponding Sandell sensitivity values are 6.94 and 24.62 ng/cm². The limits of detection and quantification are also reported for both spectrophotometric methods. Intra-and interday precision and accuracy for the developed methods have been evaluated. The methods were successfully applied to the assay of lamivudine in tablet form and the results were compared with those of a reference method by applying the Student’s t-test and F-test. No interference was observed from common tablet adjuvants. The accuracy and reliability of the methods were further ascertained by recovery experiments using the standard addition technique. The text was submitted by the authors in English.     

Theory of the surface acoustic wave/impedance sensor system and its application to the end-point determination in titrimetry

Theory and characteristics of the surface acoustic wave (SAW)/impedance sensor system in electrolyte solution are reported. This kind of sensor was constructed by a 62-MHz SAW resonator and a pair of conductive electrodes in series. By using the circuit network analysis theory, two oscillation equations were derived and used to explain the frequency-shift response to solution conductance. Results showed that the sensor possesses high sensitivity to the solution conductivity and can be applied to conductivity measurements in solution. Its sensitivity and accuracy could be improved in the presence of a large amount of unreacting foreign electrolytes. The sensor was successfully applied to four types of titration (acid-base, precipitation, oxidation-reduction and compleximetric titration) by monitoring the frequency-shift response. Factors influencing the frequencimetric titration curve were also investigated. Analytes at levels down to 1 × 10⁻⁵ M could be determined by the proposed titration technique. The total acidity in several food samples was determined and the results were consistent with those obtained by conventional methods.     

Development of flow injection potentiometric methods for the off-line and on-line determination of fluoride to monitor the biodegradation of a monofluorophenol in two bioreactors

Water treatment has become a source of concern as new pollutants and higher volumes of waste water must be treated. Emerging biological approaches, namely the use of bioreactors, for cleaning processes have been introduced. The use of bioreactors requires the development of efficient monitoring tools, preferably with real-time measurements. In this work, a couple of flow injection systems were developed and optimized for the potentiometric determination of fluoride to monitor a rotating biological contactor (RBC) bioreactor and a sequencing batch reactor (SBR) with off-line and on-line sampling. Both the RBC and the SBR bioreactors were set up for the biodegradation of the halogenated organic compound 2-fluorophenol and, as fluoride was a degradation byproduct, the process was monitored by following up its concentration.The described flow injection potentiometric methods enabled the fluoride determination within the required quantification range 0.10-100 mM. The possible interferences from the growth medium were minimized in-line. The determination rate was 78 h⁻¹ for the off-line monitoring of RBC and 50⁻¹ h for the on-line monitoring of the SBR, with a sample consumption of 0.500 mL and 0.133 mL per determination, respectively. Furthermore, the overall reagent consumption was quite low. The accuracy of the system was evaluated by comparison with a batch procedure. The SBR efficiency was monitored both on-line by the flow system and off-line by HPLC, for comparison purposes.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.     

茉莉酸甲酯和超氧化物歧化酶相互作用的光谱法研究

通过荧光光谱法和紫外吸收光谱法研究了超氧化物歧化酶和茉莉酸甲酯之间的相互作用。经过荧光光谱法的研究表明,超氧化物歧化酶和茉莉酸甲酯的相互作用是一个静态猝灭的过程,它们之间是以氢键和范德华力结合的,同时得到超氧化物歧化酶和茉莉酸甲酯的结合位点数n,表观结合常数K和热力学参数ΔH,ΔG,ΔS。而根据非放射性能量转移的F rster理论和同步荧光光谱证明茉莉酸甲酯和超氧化物歧化酶的相互作用位点同时接近超氧化物歧化酶色氨酸(Trp)和酪氨酸(Tyr)残基。     

The application of thermoanalytical methods in studies on the pathomechanism of human diseases

This mini-review attempts to give a short summary of the application of temperature-dependent techniques in bio-medical research. Results obtained by thermal analysis provide valuable support to scientific theories on various human pathophysiological processes as well as to several therapeutic approaches. Special attention is focussed on cardiovascular disease, since of approx. 11 million deaths occurring per annum in developed countries more than 3.9 million were due to this disease, as recorded by WHO. Recent research on the pathogenesis of atherosclerosis has concentrated on the physico-chemical nature of the arteries and on the roles of serum lipoproteins and defects in cellular metabolism of cholesterol. An understanding of the physical and chemical nature of lipids accumulated in the arterial wall may help explain how it gets into the artery and how it can be removed. Smectic cholesteryl-ester phases had been observed in a number of fatty streaks and advanced atherosclerotic lesions within the arteries. These phases have physical characteristics that can be identified with the polarizing or electron microscope, by calorimetry, by NMR spectrometry or by X-ray diffraction.

---

Zusammenfassung Es wird versucht, einen kurzen überblick über die Anwendung temperaturabhängiger Techniken in der biomedizinischen Forschung zu geben. Thermoanalyti-sche Ergebnisse bieten eine wertvollen Beitrag für wissenschaftliche Theorien zu verschiedenen pathophysiologischen Vorgängen beim Menschen als auch für verschiedene therapeutische Methoden. Besondere Aufmerksamkeit wird Herzkreislaufkrankheiten geschenkt, da laut WHO-Berichten von den jährlich etwa 11 Millionen Todesfällen in den hochentwickelten Ländern mehr als 3,9 Millionen auf diese Krankheiten zurückzuführen sind. Die jüngste Forschung auf dem Gebiete der Pathogenese von Atherosklerose konzentrierte sich auf die physikalisch-chemische Natur der Arterien sowie auf die Rolle von Serumlipoproteinen und Defekte im Zellmetabolismus von Cholesterol. Eine eingehende Untersuchung der physikalischen und chemischen Natur von den in der Arterienwand angehäuften Lipiden kann helfen zu erklären, wie diese in die Arterie gelangen und wie sie von dort entfernt werden können. In einer Anzahl von fettigen Bändern und krankhaften atherosklerotischen Veränderungen im fortgeschrittenen Stadium in den Arterien wurden smektische Cholesterylesterphasen beobachtet. Diese Phasen besitzen physikalische Eigenschaften, die mittels Polarisations- oder Elektronenmikroskop, Kalorimetrie, NMR-Spektroskopie und Röntgendiffraktion identifiziert werden können.

     

The effects of high concentrations of aqueous tetramethylammonium chloride and other salts on the dissociation of phenylphosphonic acid and on the enolization of acetone

The dissociation constants of benzoic acid and phenylphosphonic acid have been determined in aqueous solutions containing tetramethylammonium chloride at concentrations up to 15 and 13 molal, respectively. The second dissociation constant of phenylphosphonic acid has also been determined in concentrated solutions of alkali halides. Whereas the organic electrolyte increases the observed pK values of the acids, the inorganic electrolyte idecrease them. The rate of enolization of acetone, catalyzed by phenylphosphonate dianion is increased by the presence of tetramethylammonium chloride, but is decreased by the presence of inorganic salts, in accordance with the changes in the apparent acidity constants of phenylphosphonate monoanion that the two different kinds of electrolyte bring about. The slope of the Brónsted plot for the inorganic salts is 0.76; that for the organic electrolyte is 0.46. Non-quaternary ammonium salts also increase the rate of the phenylphosphonate dianion catalyzed enolization of acetone, but this appears to be due to a considerable extent to the formation of reactive iminium ion intermediates.     

Vapour-liquid equilibrium of the acetone---methanol system in the presence of KSCN and comparison with other salts

The effect of KSCN at salt mole fractions of 0.01–0.05 and at saturation on the VLE of the binary acetone-methanol system has been experimentally investigated at 101.32 kPa using a modified Othmer equilibrium still. The experimental data were correlated by the electrolytic NRTL model [B. Mock, L.B. Evans and C.C. Chen, AIChE J., 32 (1986) 1655–1664], the extended UNIQUAC equation [B. Sander, A. Fredensland and P. Rasmussen, Chem. Eng. Sci., 41 (1986) 1171–1183] and the modified Wilson and NRTL models proposed by Tan [T.C. Tan, AIChE J., 31 (1985) 2083–2085; Chem. Eng. Res. Des., 65 (1987) 355–366; Trans. Inst. Chem. Eng., 68 (1990) 93–102]. The results were compared with those obtained by Tan's predictive models. A crossover between the salting-out and salting-in effects on acetone and a non-azeotropic minimum in the temperature-composition diagram were observed at low and high salt concentrations. Based on the solubility data in the mixture, comparisons with the effect of other salts on the same mixed solvent were made.