Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.     

Side-chain-controlled H- and J-aggregation of amphiphilic porphyrins in CTAB micelles

The aggregation behavior of a series of amphiphilic 4-hydroxyphenyl porphyrins with one (P1), two (P2) and three (P3) hexadecyl side chains in cetyltrimethylammonium bromide (CTAB) micelles has been studied by means of UV-vis and fluorescence spectra. It was found that the number of hexadecyl side chains not only controls the H- and J-aggregation of the porphyrins in CTAB micelles, but also influences the aggregation concentration and tendency. With increasing porphyrin concentration, P1 and P2 form H-aggregates in CTAB micelles, while P3 forms J-aggregates. Porphyrins with more hexadecyl side chains tend to form aggregates more easily and at lower concentrations in CTAB micellar solutions.     

Core-modified porphyrin based assemblies

Core-modified porphyrins, resulting from the replacement of one or two pyrrolic nitrogens with other hetero atoms such as O, S, Se, and Te possess very interesting and distinct properties compared to tetrapyrrolic porphyrins. Specially, the singlet state energy levels can be fine tuned with suitable modification of porphyrin core by substituting pyrrolic “N” with hetero atoms such as “O” and “S”. In this review, we discuss the synthesis of various core-modified porphyrin building blocks containing one, two, three and four functional groups by following various synthetic methodologies developed in the past decade and the use of these core-modified porphyrin building blocks in the construction of several covalently and non-covalently linked hetero porphyrin dyads, triads, tetrads and pentads containing one or more different types of porphyrin sub-units. The photophysical studies are also described to show the possibility of singlet–singlet energy transfer from one porphyrin sub-unit to another in these hetero porphyrin arrays.     

One-flask synthesis of mono- and trifunctionalized 21-thia and 21-oxaporphyrin building blocks and their application in the synthesis of covalent and noncovalent unsymmetrical porphyrin arrays

A rapid synthetic route has been developed to synthesize mono- and trifunctionalized 21-thia and 21-oxaporphyrin systems using simple precursors such as 2[alpha-(aryl)-alpha-hydroxymethyl] thiophene (thiophene mono-ol) and 2[alpha-(aryl)-alpha-hydroxymethyl] furan (furan mono-ol), respectively. Condensation of one equivalent of thiophene or furan mono-ol with two equivalents of aryl aldehyde and three equivalents of pyrrole under porphyrin forming conditions followed by column chromatography resulted in functionalized 21-thia or 21-oxaporphyrins. To synthesize monofunctionalized porphyrins, the mono-ol containing the functionalized aryl group was used. The functionalized aldehydes were used to synthesize trifunctionalized porphyrins. The mono-ol method is versatile and applicable to synthesize mono- and trifunctionalized 21-thia and 21-oxaporphyrins containing functional groups such as iodophenyl, ethynylphenyl, hydroxyphenyl, bromophenyl, and pyridyl groups. The monofunctionalized porphyrin building blocks containing iodophenyl and ethynylphenyl groups were used further to synthesize four unsymmetrical covalent porphyrin dimers containing two different porphyrin cores such as N3S-N4, N3O-N4, and N3S-N3O bridged via diaryl ethyne group and one symmetrical phenylethyne bridged dimer containing two N3S cores. A preliminary photophysical study on these dimers indicated a possibility of energy transfer from one subunit to another. We also demonstrated the use of trifunctionalized porphyrins in the synthesis of two noncovalent unsymmetrical porphyrin tetramers containing one N3S and three N4 porphyrin subunits.     

Fluorinated photosensitizers: synthesis, photophysical, electrochemical, intracellular localization, in vitro photosensitizing efficacy and determination of tumor-uptake by F in vivo NMR spectroscopy

For in vivo NMR studies, starting from pyrroles, a series of fluorinated porphyrins were synthesized by following the MacDonald reaction conditions. Upon reaction with osmium tetroxide, a fluorinated porphyrin containing four trifluoromethyl groups (12 fluorine units) was converted into the related chlorin and bacteriochlorin which exhibited long-wavelength absorptions at 652 and 720 nm, respectively. All compounds produced good singlet oxygen production efficiency. A comparative study of nine porphyrins with and without fluorine substituents indicated no adverse effects of the presence of fluorinated groups in the photophysical properties of the porphyrins, chlorins or bacteriochlorins. The first and second one-electron reduction potentials (vs SCE) of the investigated compounds range between −1.29 and −1.49 V and between −1.66 and −1.84 V in PhCN containing 0.1 M TBAP. UV-visible spectroelectrochemical data suggested the formation of π-anion and π-cation radicals upon the first reduction and first oxidation. The in vivo ¹⁹F MR study of a representative fluorine labeled compound with twelve equivalent fluorines confirmed the presence of the fluorine labeled sensitizer in mouse (C3H/HeJ) implanted with RIF tumors on mouse foot dorsum by inoculating 2×10⁵ cells (the studies were repeated on four tumored mice to confirm the feasibility and reproducibility). All fluorinated compounds were found to be quite effective in vitro. In a comparative intracellular localization study with Rhodamine-123 in RIF tumor cells, the most soluble porphyrin containing two propionic ester side chains was found to localize in mitochondria as well as the related chlorin and bacteriochlorin.     

具有不同取代链长的卟啉衍生物LB膜的结构研究

本文研究了三种羧酸取代的四苯基卟啉衍生物在空气/Cd^2^+水溶液界面上所形成的单层膜及LB膜。这三种卟啉衍生物中, 一种没有脂链, 另外两种具有不同长度的脂链。由π-A等温线得到的平均表观分子面积相差很大。紫外-可见光谱表明, LB膜中卟啉的Soret吸收带相对于溶液的吸收均红移, 但红移程度不同。LB膜的偏振紫外-可见光谱表明, LB膜中三种卟啉衍生物的卟啉环具有基本一致的取向。运用亚相降低法得到了三种卟啉衍生物单层LB膜, 其紫外-可见光谱与用垂直提拉法得到的LB膜的紫外-可见光谱具有一致的特征。这些结果表明: 卟啉衍生物有无取代链及取代链长的不同对平均表观分子面积的大小和膜中环间的距离有影响, 但对环的取向没有影响。环的取向由环本身及环上的亲水取代基来确定。气/液界面上三种卟啉衍生物的单层膜中环也具有一致的取向, 且与LB膜中环的取向相差不大。提拉不会对膜中环的取向及膜的结构造成大的改变。     

Triplet behavior in weakly coupled chromophors in covalent pyridyl porphyrin-polymer systems

The photophysical properties of the 5-(4-pyridyl)-10,15,20-tri(4-methyloxyphenyl)porphyrins covalently linked to polyethylene glycol – PEG of different molecular weights (35000, 20000 and 8000) dissolved in dimethylsulfoxide were studied. The singlet and triplet states of the porphyrin species behavior were discussed in terms of fluorescence and thermal relaxation processes. The absorption, fluorescence and photothermal experiments showed that in the porphyrins linked to the PEG systems in dimethylsulfoxide the dye moieties occur in weakly interacting dimers. The triplet state enhancement in the 5-(4-pyridyl)-10,15,20-tri(4-methyloxyphenyl)porphyrins covalently linked to PEG was discussed.It was shown that even that the weak interaction of the porphyrin species in the covalent systems with PEG is not detectable by the absorption and only slightly by fluorescence, it is possible to be performed by the complementary spectroscopic methods like photoacoustics and photothermal time resolved spectroscopy.     

一种新型枝化聚乙二醇的合成

以谷氨酸作为中心分子,首先对谷氨酸的氨基进行Boc保护,然后在4-二甲基氨基吡啶-二环己基碳二亚胺催化体系的作用下,将两条线性的单甲氧基聚乙二醇(mPEG)链连接到谷氨酸的两个羧基上,合成出含有两条聚乙二醇(PEG)链及一个活性氨基的新型枝化PEG[Glu(PEG)2],其结构经1H NMR,IR,GPC和VPO表征。     

Strategies toward biocompatible artificial implants: Grafting of functionalized poly(ethylene glycol)s to poly(ethylene terephthalate) surfaces

Epoxide and aldehyde end‐functionalized poly(ethylene glycol)s (PEGs) (M_w = 400, 1000, 3400, 5000, and 20,000) were grafted to poly(ethylene terephthalate) (PET) film substrates that contained amine or alcohol groups. PET‐PAH and PET‐PEI were prepared by reacting poly(allylamine) (PAH) and polyethylenimine (PEI) with PET substrates, respectively; PET‐PVOH was prepared by the adsorption of poly(vinyl alcohol) (PVOH) to PET substrates. Grafting was characterized and quantified by the increase of the intensity of the PEG carbon peak in the X‐ray photoelectron spectra. Grafting yield was optimized by controlling reaction parameters and was found to be substrate‐independent in general. Graft density consistently decreased as PEG chain length was increased. This is likely due to the higher steric requirement of higher molecular weight PEG molecules. Water contact angles of surfaces containing long PEG chains (3400, 5000, and 20,000) are much lower than those containing shorter PEG chains (400 and 1000). This indicates that longer PEG chains are more effective in rendering surfaces hydrophilic. Protein adsorption experiments were carried out on PET‐ and PEG‐modified derivatives using collagen, lysozyme, and albumin. After PEG grafting, the amount of protein adsorbed was reduced in all cases. Trends in surface requirements for protein resistance are: surfaces with longer PEG chains and higher chain density, especially the former, are more protein resistant; PEG grafted to surfaces containing branched or network polymers is not effective at covering the underlying substrate, and thus does not protect the entire surface from protein adsorption; and substrates containing surface charge are less protein‐resistant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5389–5400, 2004     

Synthesis of porphyrin-quinolone conjugates

meso-Tetrakis(pentafluorophenyl)porphyrin reacts with propargyl alcohol to afford porphyrins substituted with one, two, three or four prop-2-yn-1-yloxy groups in the 4-position of the meso-aryl groups. These new porphyrin derivatives react with a 6-azidoquinolone under ‘click-chemistry’ conditions to give porphyrin-quinolone conjugates linked by 1,2,3-triazole units.     

Effect of pH on complexation in mixed dilute aqueous solutions of poly(acrylic acid), poly(ethylene glycol), and Cu2+ ions

The phase states of mixed dilute solutions of PAA, PEG, and Cu²⁺ ions largely determines the mechanism governing the growth of metal nanoparticles during the subsequent reduction of copper ions. Mixtures with PAA: PEG > 1 base-mol/base-mol and PAA: Cu²⁺ ≥ 5 base-mol/mol are studied. It is shown that the simultaneous complexation of PAA with PEG and Cu²⁺ ions in these mixtures at pH values below the intrinsic pH of a solution is accompanied by phase separation related to insolubility of PAA-PEG interpolymer complexes. A decrease in the pH of the ternary mixture is caused by the release of a strong low-molecular-mass acid due to complexation with Cu²⁺ ions. The minimum pH value, above which the PAA-PEG-Cu²⁺ system becomes single-phase (a transparent solution), depends on the concentration ratio between PAA and PEG chains (the mean degree of polymerization). This value is either 6.8–7.0 (if all macromolecules are incorporated in the insoluble interpolymer complex with PEG) or 4.0 (if chains occur in excess). Methods of preparing single-phase systems in the pH range 4.0–7.0 via exchange reactions of the PAA-Cu²⁺ complex with PEG or the nonstoichiometric soluble interpolymer complex PAA-PEG are developed. Viscometry, electron microscopy, and dynamic light scattering are used to investigate the compositions and structures of soluble complexes, in which either each chain (if the chain is long) may be linked with both PEG and Cu²⁺ ions or PAA chains are redistributed between two complexes (at comparable lengths of PAA and PEG chains).     

Synthesis of covalently linked porphyrin dimers and trimers

The synthesis of covalently linked porphyrin dimers and trimers is described. Mono- and dihydroxyporphyrins were synthesized by transeslerifying 5,10,15,20-tetra(4-carbomethoxy-phenyl)porphyrin with ethylene glycol. The mixture of transesterified porphyrins were separated by preparative thin layer chromatography. Metal derivatives were made of the mono- and dihydroxyporphyrins and these were reacted with the acid chloride of a monocarboxyporphyrin to yield hybrid dimers and trimers containing one melalloporphyrin and either one or two free base porphyrins. The structures and purity of the dimers and trimers were established by measuring the absorbance spectra, nmr spectra, and molecular weight by gel permeation chromatography.     

双头基两亲分子在气液界面的Langmuir铺展膜结构

用表面压-面积等温线,原子力显微镜（AFM）和X射线衍射（XRD）对两种具有不同取代位置的新型双头基两亲分子（bolaamphiphile）A和B在气液界面形成的Langmuir铺展膜的结构进行了研究,化合物1,20-二十碳二β-萘酯（B）在气液界面形成了拉伸型 Langmuir单分子膜,而化合物1,20-二十碳二α-萘酯（A）在气液界面则形成了具有三层分子厚度的二维结晶膜.     

Synthesis and characterization of novel pyrene-dendronized porphyrins exhibiting efficient fluorescence resonance energy transfer: optical and photophysical properties

A novel series of pyrene dendronized porphyrins bearing two and four pyrenyl groups (Py(2)-TMEG1 and Py(4)-TMEG2) were successfully synthesized. First and second generation Fréchet type dendrons (Py(2)-G1OH and Py(4)-G2OH) were prepared from 1-pyrenylbutanol and 3,5-dihydroxybenzyl alcohol. These compounds were further linked to a trimesitylphenylporphyrin containing a butyric acid spacer via an esterification reaction to obtain the desired products. Dendrons and dendronized porphyrins were fully characterized by FTIR and (1)H NMR spectroscopy and their molecular weights were determined by matrix-assisted laser desorption ionization time of flight mass spectrometry. Their optical and photophysical properties were studied by absorption and fluorescence spectroscopies. The formation of dynamic excimers was detected in the pyrene-labeled dendrons, with more excimer being produced in the higher generation dendron. The fluorescence spectra of the pyrene dendronized porphyrins exhibited a significant decrease in the amount of pyrene monomer and excimer emission, jointly with the appearance of a new emission band at 661 nm characteristic of porphyrin emission, an indication that fluorescence resonance energy transfer (FRET) occurred from one of the excited pyrene species to the porphyrin. The FRET efficiency was found to be almost quantitative ranging between 97% and 99% depending on the construct. Model Free analysis of the fluorescence decays acquired with the pyrene monomer, excimer, and porphyrin core established that only residual pyrene excimer formation in the dendrons could occur before FRET from the excited pyrene monomer to the ground-state porphyrin core.     

Dynamic Molecular Invasion into a Multiply Interlocked Catenane

A multiply interlocked catenane with a novel molecular topology was synthesized; a phthalocyanine bearing four peripheral crown ethers was quadruply interlocked with a cofacial porphyrin dimer bridged with four alkylammonium chains. The supramolecular conjugate has two nanospaces surrounded by a porphyrin, a phthalocyanine, and four alkyl chains to accommodate guest molecules. Because the phthalocyanine can move along the alkyl chains, it acts as an adjustable wall, thus permitting the invasion of large molecules into the nanospaces without spoiling the affinity of the association. The dynamic molecular invasion allowed the intercalation of dianionic porphyrins into both nanospaces with high affinity. A photometric titration experiment revealed the two‐step inclusion phenomenon. The multiply interlocked catenane complexed with three Cu²⁺ ions, and the spin–spin interaction was switched off by the intercalation of dianionic porphyrins.     

Effect of PEG crystallization on the self-assembly of PEG/peptide copolymers containing amyloid peptide fragments

The effect of poly(ethylene glycol) PEG crystallization on beta-sheet fibril formation is studied for a series of three peptide/PEG conjugates containing fragments modified from the amyloid beta peptide, specifically KLVFF, FFKLVFF, and AAKLVFF. These are conjugated to PEG with M n = 3300 g mol (-1). It is found, via small-angle X-ray scattering, X-ray diffraction, atomic force microscopy, and polarized optical microscopy, that PEG crystallinity in dried samples can disturb fibrillization, in particular cross-beta amyloid structure formation, for the conjugate containing the weak fibrillizer KLVFF, whereas this is retained for the conjugates containing the stronger fibrillizers AAKLVFF and FFKLVFF. For these two samples, the alignment of peptide fibrils also drives the orientation of the attached PEG chains. Our results highlight the importance of the antagonistic effects of PEG crystallization and peptide fibril formation in PEG/peptide conjugates.     

Masked imidazolyl-dipyrromethanes in the synthesis of imidazole-substituted porphyrins

Imidazole-substituted metalloporphyrins are valuable for studies of self-assembly and for applications where water solubility is required. Rational syntheses of porphyrins bearing one or two imidazol-2-yl or imidazol-4-yl groups at the meso positions have been developed. The syntheses employ dipyrromethanes, 1-acyldipyrromethanes, and 1,9-diacyldipyrromethanes bearing an imidazole group at the 5-position. The polar, reactive imidazole unit was successfully masked by use of (1) the 2-(trimethylsilyl)ethoxymethyl (SEM) group at the imidazole pyrrolic nitrogen, and (2) a dialkylboron motif bound to the pyrrole of the dipyrromethane and coordinated to the imidazole imino nitrogen. The nonpolar nature of such doubly masked imidazolyl-dipyrromethanes facilitated handling. Selected masked dipyrromethanes were characterized by 11B and 15N NMR spectroscopy. Five distinct methods were examined to obtain trans-A2B2-, trans-AB2C-, and trans-AB-porphyrins. Each porphyrin contained one or two SEM-protected imidazole units. The SEM group could be removed with TBAF or HCl. Two zinc(II) porphyrins and a palladium(II) porphyrin bearing a single imidazole moiety were prepared and subjected to alkylation (with ethyl iodide, 1,3-propane sultone, or 1,4-butane sultone) to give water-soluble imidazolium- porphyrins. This work establishes the foundation for the rational synthesis of a variety of porphyrins containing imidazole units.     

对微环境敏感的系列双亲卟啉的光谱研究

研究了系列双亲卟啉(四苯酚基卟啉P₀及其烷氧基衍生物P₁,P₂,P₃)在不同微环境下的电子吸收光谱和荧光发射及荧光激发光谱.研究发现,卟啉在THF溶液中以单体形式存在,并且其侧链取代基对卟啉电子态的影响很小;然而卟啉在CTAB胶束溶液中的光谱特性却表现出很大差异,由此分析了不同侧链取代基对卟啉分子聚集行为和定位性质的影响,初步解释了卟啉在CTAB胶束溶液中随体系pH值改变而发生的荧光猝灭现象.     

Determination of phosphorylation sites in lipooligosaccharides from Pseudoalteromonas haloplanktis TAC 125 grown at 15 degrees C and 25 degrees C by nano-electrospray ionization quadrupole time-of-flight tandem mass spectrometry

Lipooligosaccharides (LOSs) are macromolecules present on the external cellular membrane of Gram-negative bacteria, structurally made of two distinct regions, lipid A and Core. By varying their growth temperature, bacteria such as psychrophiles change the phosphorylation distribution of the LOSs produced. The level of phosphorylation and the phosphate group positions in LOSs produced by the extremophile psychrophilic bacterium Pseudoalteromonas haloplanktis TAC 125, grown at 15 degrees C and 25 degrees C, were investigated by nano-electrospray ionization quadrupole time-of-flight mass spectrometry (nanoESI-QTOF-MS) and tandem mass spectrometry (MS/MS). The samples, obtained by phenol/chloroform/petroleum ether (PCP) extraction of dried cells, were treated with hydrazine at 37 degrees C in order to reduce the heterogeneity by removal of the ester-linked fatty acid moieties. The molecular ion distributions in these LOS fractions were investigated in negative ion mode. Based on these data it was postulated that the sample grown at 25 degrees C contained four phosphate groups while that at 15 degrees C contained three. In order to determine phosphorylation sites in sugar chains, the samples were submitted to low collision energy MS/MS for sequencing. In the sample with three phosphates, one was found to be linked to the tetrasaccharide Core region, more precisely to position C-4 of the Kdo unit. The two remaining phosphate groups were both linked to the 2-acylamide-2-deoxy-D-glucopyranose of the lipid A moiety, and two possible distributions could be postulated on the basis of the fragmentation pattern obtained; in the first case both phosphate groups are linked as a pyrophosphate moiety to position C-1 of the proximal glucosamine (reducing residue), while in the second case one phosphate is linked to position C-1 of the proximal glucosamine and the other to position C-4' of the distal glucosamine (non-reducing residue). This distribution was also found in the lipid A moiety of the tetraphosphorylated sample grown at 25 degrees C, which bears two phosphate groups on the Core region, one on position C-4 of the Kdo and the other on position C-7 or C-8 of the same residue. The phosphate locations were derived from the intra-ring cleavage ions of sugar moieties in the LOSs obtained by an optimized CID procedure using negative ion QTOF-MS/MS.     

Cleavage of Multiple Disulfide Bonds in Insulin via Gold Cationization and Collision-induced Dissociation

Intact bovine insulin, with its two chains linked via two disulfide linkages, has been used as a model system to study the incorporation of one or more gold cations as means for facilitating the cleavage of multiple disulfide bonds in a tandem mass spectrometry experiment. Gas-phase ion/ion reactions involving Au(I)Cl(2) (-) or Au(III)Cl(4) (-) were used to incorporate either one or two gold cations into multiply-protonated insulin cations, followed by ion trap collision-induced dissociation (CID) of the products. The incorporation of a single gold cation followed by CID showed little evidence for disulfide bond cleavage. Rather, the CID spectra were similar to those acquired for the same charge state with only excess protons present. However, the incorporation of two gold cations, regardless of oxidation state, resulted in efficient cleavage of the disulfide bonds connecting the two chains of insulin. Furthermore, ion trap CID of the insulin complexes containing two gold cations showed more sequence information compared to the complexes containing only one gold cation or no gold cations. The partitioning of the gold cations between the two chains upon CID proved to be largely asymmetric, as both gold cations tended to stay together. There appeared to be a slight preference for both gold cations to partition into the B-chain. However, the relatively low contribution from single chain ions with only one gold ion suggests a degree of cooperativity in the overall mechanism for separation of the two chains.