Nonstationary indentation of a rigid blunt indenter into an elastic layer: A plane problem

The nonstationary indentation of a rigid blunt indenter into an elastic layer is studied. An approach to solving a mixed initial-boundary-value problem with an unknown moving boundary is developed. The problem is reduced to an infinite system of integral equations and the equation of motion of the indenter. The system is solved numerically. The analytical solution of the nonmixed problem is found for the initial stage of the indentation process __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 3, pp. 55–65, March 2008.     

Steady-state vibrations of an elastic beam on a visco-elastic layer under moving load

Summary  The steady-state response of an elastic beam on a visco-elastic layer to a uniformly moving constant load is investigated. As a method of investigation the concept of “equivalent stiffness” of the layer is used. According to this concept, the layer is replaced by a 1D continuous foundation with a complex stiffness, which depends on the frequency and the wave number of the bending waves in the beam. This stiffness is analyzed as a function of the phase velocity of the waves. It is shown that the real part of the stiffness decreases severely as the phase velocity tends to a critical value, a value determined by the lowest dispersion branch of the layer. As the phase velocity exceeds the critical value, the imaginary part of the equivalent stiffness grows substantially. The dispersion relation for bending waves in the beam is studied to analyze the effect of the layer depth on the critical (resonance) velocity of the load. It is shown that the critical velocity is in the order of the Rayleigh wave velocity. The smaller the layer depth, the higher the critical velocity. The effect of viscosity in the layer on the resonance vibrations is studied. It is shown that the deeper the layer, the smaller this effect. Received 22 March 1999; accepted 26 July 1999     

Nonstationary indentation of a blunt rigid body into an elastic layer: An axisymmetric problem

The nonstationary indentation of a blunt rigid body into an elastic layer is studied. The general formulation of the problem includes different boundary conditions in the contact area and on the free surface of the layer. The simplified nonmixed problem that arises at the early stage of interaction and allows obtaining approximate results for later times is solved exactly. The solution obtained is compared with that for the plane case __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 35–46, July 2008.     

Oscillations of a cylinder piercing a linearly stratified fluid layer

The plane problem of the small steady-state oscillations of a horizontal cylinder arbitrarily located in a three-layer fluid whose upper and lower layers are homogeneous and whose middle layer is linearly stratified is considered in the linear formulation using the Boussinesq approximation. The fluid is assumed to be ideal and incompressible. The method of mass sources distributed along the body contour is used in the internal wave generation regime and an integral equation for the fluid pressure is derived in the non-wave regime. The hydrodynamic load acting on the body is calculated as a function of the oscillation frequency of the cylinder and its location. The results are compared with experimental data.     

Axisymmetric problem of a nonhomogeneous elastic layer

Summary The paper deals with a theoretical treatment of elastic behavior for a medium with nonhomogeneous materials property, which is defined by the relation , i.e., shear modulus of elasticity G varies with the dimensionless axial coordinate by the power product form, arbitrarily. Fundamental differential equation for such nonhomogeneous medium has been already proposed in [5]. It is given by a second-order partial differential equation. However, it was found that the fundamental equation is not sufficient in general to solve several kinds of boundary-value problems. On the other hand, it is shown in the present paper making use of the fundamental equations system for a nonhomogeneous medium, which has been proposed in our previous paper [7], it is possible to solve axisymmetric problems for a thick plate (layer) subjected to an arbitrarily distributed load or a concentrated load on its surfaces. Numerical calculations are carried out for several cases, taking into account the variation of the nonhomogeneous parameter m. The numerical results for displacements stress and components are shown in graphical form. Accepted for publication 25 March 1997     

Rayleigh waves in an isotropic elastic half-space coated by a thin isotropic elastic layer with smooth contact

In the present paper, we are interested in the propagation of Rayleigh waves in an isotropic elastic half-space coated with a thin isotropic elastic layer. The contact between the layer and the half space is assumed to be smooth. The main purpose of the paper is to establish an approximate secular equation of the wave. By using the effective boundary condition method, an approximate, yet highly accurate secular equation of fourth-order in terms of the dimensionless thickness of the layer is derived. From the secular equation obtained, an approximate formula of third-order for the velocity of Rayleigh waves is established. The approximate secular equation and the formula for the velocity obtained in this paper are potentially useful in many practical applications.     

Effective elastic moduli of an inhomogeneous medium with cracks

In the present paper, the effective elastic moduli of an inhomogeneous medium with cracks are derived and obtained by taking into account its microstructural properties which involve the shape, size and distribution of cracks and the interaction between cracks. Numerical results for the periodic microstructure of different dimensions are presented. From the results obtained, it can be found that the distribution of cracks has a significant effect on the effective elastic moduli of the material. The project supported by the National Education Committee for Doctor     

The parameter perturbation method on elastic wave equation in inhomogeneous medium

I.IntroductionTheelasticwaveininhomogeneousmediumiscomplicatedbecauseofthediffracting,scattering,andtransmutingofthewavetapes.Exceptforsomesimpleandregularmediummode1s,thesolutionofelasticwavehasnotbeengotyet.Nowadays,theresearchoftheelasticwavescattering…     

Three-dimensional elastic behavior of a nonhomogeneous layer

Summary  This paper deals with the theoretical treatment of a three-dimensional elastic problem governed by a cylindrical coordinate system (r,θ,z) for a medium with nonhomogeneous material property. This property is defined by the relation G(z)=G ₀(1+z/a) ^m where G ₀,a and m are constants, i.e., shear modulus of elasticity G varies arbitrarily with the axial coordinate z by the power product form. We propose a fundamental equation system for such nonhomogeneous medium by using three kinds of displacement functions and, as an illustrative example, we apply them to an nonhomogeneous thick plate (layer) subjected to an arbitrarily distributed load (not necessarily axisymmetric) on its surfaces. Numerical calculations are carried out for several cases, taking into account the variation of the nonhomogeneous parameter m. The numerical results for displacement and stress components are shown graphically. Received 10 May 1999; accepted for publication 15 August 1999     

POINT FORCE SOLUTION FOR A TRANSVERSELY ISOTROPIC ELASTIC LAYER

ＰＯＩＮＴＦＯＲＣＥＳＯＬＵＴＩＯＮＦＯＲＡＴＲＡＮＳＶＥＲＳＥＬＹＩＳＯＴＲＯＰＩＣＥＬＡＳＴＩＣＬＡＹＥＲＰＯＩＮＴＦＯＲＣＥＳＯＬＵＴＩＯＮＦＯＲＡＴＲＡＮＳＶＥＲＳＥＬＹＩＳＯＴＲＯＰＩＣＥＬＡＳＴＩＣＬＡＹＥＲ￥ＤｉｎｇＨａｏｊｉａｎｇ（丁...     

Contact interaction of a rigid heat-conducting punch with an elastic layer involving nonstationary frictional heating

A mathematical formulation is given and a solution is found to the quasistatic contact problem of thermoelasticity for a rigid heat-conducting punch moving over an elastic layer with fixed base. The interaction is accompanied by heating due to frictional forces obeying Amonton’s law. The problem is reduced to a system of integral equations with time-varying limits of integration. The structure of these equations depends on the type of thermal and physical conditions on the contact surface. An algorithm is proposed for the numerical solution of this kind of equations. The variation in the contact pressure and contact area with time is studied __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 35–46, December 2005.     

On the dynamic behavior of gas bubbles in an inhomogeneous standing wave

The motion of gas bubbles in an inhomogeneous standing wave is examined. The nonlinear system of equations is solved by the averaging method. Stationary solutions (bubble clusters) are found, and the conditions for their stability are established __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 5, pp. 88–94, May 2006.     

Forced Oscillations of a Submerged Axisymmetric Jet Membrane

The forced oscillations of a submerged elastic jet membrane modelling an axisymmetric counter-flow sound source are analyzed. The dependence of the amplitude-frequency response on the geometrical and hydrodynamic parameters of the membrane is studied. The influence of the properties of the fluid and the hydrodynamic pressure on the amplitude-frequency response is analyzed. The theoretical and experimental results are compared__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 60–65, April 2005.     

Scattering of love waves by an interface crack between a piezoelectric layer and an elastic substrate

The scattering of Love waves by an interface crack between a piezoelectric layer and an elastic substrate is investigated by using the integral transform and singular integral equation techniques. The dynamic stress intensity factors of the left and the right crack tips are determined. It is found from numerical calculation that the dynamic response of the system depends significantly on the crack configuration, the material combination and the propagating direction of the incident wave. It is expected that specifying an appropriate material combination may retard the growth of the crack for a certain crack configuration. Project supported by the National Natural Science Foundation of China (No. 19891180), the Fundamental Research Foundation of Tsinghua University (JZ 2000.007) and the Fund of the Education Ministry of China.     

Asymptotic solution of the problem of the action of a stamp on an elastic layer lying on the surface of a compressible fluid of infinite depth

This paper considers a two-dimensional linear unsteady problem of rigid-stamp indentation on an elastic layer of finite thickness lying on the surface of a compressible fluid of infinite depth. The Lamé equations holds for the elastic layer, and the wave equation for the fluid velocity potential. Using the Laplace and Fourier transforms, the problem is reduced to determining the contact stresses under the stamp from the solution of an integral equation of the first kind, whose kernel has a logarithmic singularity. An asymptotic solution of the problem is constructed for large times of interaction. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 2, pp. 131–142, March–April, 2008.     

Propagation of nonlinear waves in an inhomogeneous gas-liquid medium. Derivation of wave equations in the Korteweg-de Vries approximation

Equations describing the propagation of waves of small but finite amplitude in a liquid with gas bubbles are derived. The bubble distribution density is a continuous function of bubble size and spatial coordinates. It is found that, for a uniform bubble distribution, the obtained equations become the Korteweg-de Vries, Kadomtsev-Petviashvili and Khokhlov-Zabolotskaya equations. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 2, pp. 188–197, March–April, 2009.