Nanochitosan crosslinked with polyacrylamide as the chiral stationary phase for open-tubular capillary electrochromatography

Nanoparticles exhibiting favorable surface-to-volume ratios create efficient stationary phases for electrochromatography. New nanomaterials derived from chitosan (CS) were immobilized onto modified capillaries for use as the chiral stationary phase (CSP) in open-tubular electrochromatography. This immobilization was achieved through the copolymerization of glycidyl methacrylate-modified nano-CS with methacrylamide (MAA) and bis-acrylamide crosslinkers (forming the MAA-CS capillary) rather than the attachment of nano-CS to the copolymer of glycidyl methacrylate, MAA, and bis-acrylamide (forming the MAA+CS capillary). The completed MAA-CS capillary and its precursors were examined by SEM and ATR-IR measurements. Before separating chiral samples, the MAA-CS capillary was characterized by electroosmotic flow measurements at varying pH values, concentrations, and volume percentages of organic modifiers in the running buffers. Tryptophan enantiomers were well separated by the MAA-CS capillary, whereas no enantioselectivity was observed in the MAA+CS capillary. With the addition of 80% MeOH into the phosphate buffer, the chiral separation of (±)-catechin was accomplished in a normal-phase mode. However, the new CSP has its limitations, as only two groups of α-tocopherol stereoisomers were separated.     

Rapid development of the enantiomeric separation of beta-blockers by capillary electrophoresis using an experimental design approach.

A rapid method for determining the separation conditions for chiral resolution of eleven beta-blocking drug substances by capillary electrophoresis is described, using an experimental design approach. An acidic phosphate-triethanolamine buffer and an uncoated fused-silica capillary were used for all experiments. Several modified cyclodextrins were applied as chiral selectors: sulfobutyl ether beta-cyclodextrin (SBE-beta CD), dimethyl beta-cyclodextrin (DM-beta CD), carboxymethyl beta-cyclodextrin (CM-beta CD), and hydroxypropyl beta-cyclodextrin (HP-beta CD). Two different fractional factorial experimental designs were applied: (1) a design examining four factors at three levels (3(4-2)) and (2) one examining three factors at two levels (2(3-1)). The factors studied were: type of cyclodextrin, cyclodextrin concentration, pH of the background electrolyte and percentage of organic modifier. Enough resolution for the separation of the enantiomers and even for their quantification was reached. The same scheme is proposed when a fast chiral separation method needs to be developed for other drug families.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Enantioselective separation of epoxides by capillary electrophoresis employing sulfated beta-cyclodextrin as chiral selector

A capillary electrophoresis method was developed for the enantioseparation of epoxide compounds. Sulfated beta-cyclodextrin was employed as a chiral selector. Phosphate-triethanolamine buffer showed a chiral separation effect when employing charged sulfated beta-cyclodextrin. The effect of pH, triethanolamine concentration and sulfated beta-cyclodextrin concentration on the resolution was studied. Methanol was tested as an organic modifier. Several other epoxides were successfully separated by the proposed method.     

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.     

伊瑞霉素键合手性毛细管整体柱的制备与对映体分离

以具有22个不同种类手性中心的新型大环抗生素伊瑞霉素为手性选择器,基于环氧基团高反应活性的特征,将伊瑞霉素用一步法键合到甲基丙烯酸酯整体柱表面制备伊瑞霉素键合手性毛细管整体柱。通过对制备条件进行优化,证实该制备方法可在较宽的pH范围(6.0～9.0)内进行,方法简单易行,反应条件温和。应用制备的手性毛细管整体柱在毛细管电色谱模式下,对5种手性氨基酸对映体和手性药物罗格列酮对映体进行拆分,均得到了基线分离,说明伊瑞霉素手性固定相具有较强的手性拆分能力。在优化的色谱条件下,6种对映体的分析时间均小于4 min,分析速度快。通过对有机调节剂、缓冲液pH值和缓冲盐浓度等分离条件进行系统考察,初步探讨了该手性毛细管整体柱对不同溶质的手性识别机理。     

Comparative enantioseparations with native beta-cyclodextrin and heptakis-(2-O-methyl- 3,6-di-O-sulfo)-beta-cyclodextrin in capillary electrophoresis

Twenty-three cationic chiral analytes were resolved in capillary electrophoresis using native beta-cyclodextrin and single isomer heptakis-(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin as chiral selectors. For 12 of 16 chiral analytes resolved with both chiral selectors the enantiomer migration order was opposite. In selected cases the structure of cyclodextrin-analyte complexes in aqueous solution was investigated using one-dimensional transverse rotating frame nuclear Overhauser and exchange spectroscopy. It was found that in contrast to mainly inclusion-type complexes between chiral analytes and beta-cyclodextrin, external complexes are formed between the chiral analytes and structurally crowded, highly charged heptakis-(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin.     

Enantiomer separation by capillary electrochromatography on a cyclodextrin-modified monolith

A chiral monolithic stationary phase was prepared by packing a capillary with bare porous silica and sintering the silica bed at high temperature. The resulting silica monolith was polymer-coated with Chirasil-Dex, a permethylated beta-cyclodextrin covalently linked via an octamethylene spacer to dimethylpolysiloxane. Subsequently, Chirasil-Dex was thermally immobilized on the silica support and a chiral monolith of very high stability (30 kV, more than 400 bar pressure) was obtained. The enantiomer separation of various chiral compounds by monolithic (rod) capillary electrochromatography (rod-CEC) was feasible. This method was compared with capillary liquid chromatography (LC) in a single-column mode using unified equipment. About two to three times higher efficiency was found in the rod-CEC mode as compared to rod-LC. The influence of pressure-driven flow support on efficiency, resolution, elution time and baseline stability was investigated. The amount and nature of organic modifier strongly influences efficiency and resolution.     

Systematic approach to treatment of enantiomeric separations in capillary electrophoresis and liquid chromatography II. A study of the enantiomeric separation of fluoxetine and norfluoxetine

A systematic approach to enantiomeric separations in capillary electrophoresis (CE) and liquid chromatography (LC) with chiral mobile phase additives (MPA) or a chiral stationary phase (CSP) is used in the study of fluoxetine and norfluoxetine with cyclodextrins as chiral selectors. Binding constants and selectivities are determined under the same experimental conditions (mobile phase, buffer composition). Good agreement is found between results from the three techniques. The role of the buffer salt is investigated by comparison of binding constants obtained with triethylammonium and sodium acetate buffers.

Investigation of the effects of derivatisation of the selector in CE and LC with MPA demonstrates the appropriate choice of cyclodextrin type for use in LC. By studying the influence of organic modifier content on separation parameters, CE can predict a useful solvent working range for a CSP.     

金纳米粒子修饰的手性毛细管电色谱固定相的制备及性能表征

制备了粒径为15 nm的金纳米粒子(GNPs)并将其修饰到氨基衍生化的硅胶整体柱内,通过化学键合法将牛血清白蛋白(BSA)固载到GNPs的表面作为手性固定相。通过透射电子显微镜、扫描电子显微镜等方法进行表征,结果表明,GNPs分散性良好,并被成功地修饰到毛细管柱内,含量高达17.18%。优化了BSA手性柱的制备条件,最终确定了体积分数为10%的3-氨丙基三乙氧基硅烷(APTES)和15 g/L BSA为最佳反应条件。在毛细管电色谱分离模式下,对缓冲液pH值、电压等分离条件进行了考察,最终选择了10 mmol/L pH 7.4的磷酸缓冲液和15 kV运行电压作为最佳分离条件。手性柱对3种手性化合物(色氨酸、阿替洛尔和麻黄碱)有拆分效果,对色氨酸能实现基线分离。与物理吸附法相比,化学键合法制备的手性柱拆分效果好,分析物无需柱前衍生化,且色谱柱稳定性良好。该文的制备方法也为其他类型手性选择剂的引入提供了良好的思路。     

Preparation of novel beta-cyclodextrin chiral stationary phase based on click chemistry

A facile strategy based on click chemistry for preparation of the structurally well-defined native beta-cyclodextrin (beta-CD) based chiral stationary phase (CSP) was proposed. The beta-CD CSP was evaluated by enatioseparation of benzoin, trans-stilbene oxide, Troger's base, bendroflumethiazide, ketoprofen, chlorthalidone, three flavanone compounds and two beta-adrenergic blocking agents under reversed phase high performance liquid chromatography. The chromatographic results demonstrate the chiral separation ability of click beta-CD CSP and illustrate the usefulness of click chemistry in the preparation of beta-CD based CSP.     

Optimization of the chiral resolution of baclofen by capillary electrophoresis using beta-cyclodextrin as the chiral selector

The chiral resolution of baclofen was achieved by capillary electrophoresis using a fused-silica capillary (60 cm x 75 microm ID). The background electrolyte (BGE) was phosphate buffer (pH 7.0, 50 mM)-acetonitrile (95:5 v/v) containing 10 mM beta-cyclodextrin. The applied voltage was 15 kV. The values of alpha and R(s) were 1.06 and 1.00, respectively. The electrophoretic conditions were optimized varying the pH and the ionic strength of the BGE, concentrations of beta-cyclodextrin and acetonitrile and the applied voltage.     

Simultaneous determination of dopa and carbidopa enantiomers by capillary zone electrophoresis

Dopa and carbidopa, components of the dual therapy for Parkinson's disease treatment, are both provided as single enantiomers, since their D-forms are inactive. To ensure the efficiency and safety of the therapy, these D-enantiomers, therefore, should be considered as impurities. In this paper, the enantioseparation power of different types of cyclodextrins, both neutral and charged ones, on dopa and carbidopa enantiomers was tested. Three methods of simultaneous separation of dopa and carbidopa enantiomers were developed, using highly sulfated beta-cyclodextrin and sulfated beta-cyclodextrin as chiral selector, in normal and reversed polarity mode. Two methods among these three were found sensitive enough for the quantitation of 0.1% D-enantiomers in L-forms (impurity level). After the optimization study, the best method was selected, using 16 mM sulfated beta-cyclodextrin in 15 mM sodium phosphate buffer pH 2.45, an uncoated fused-silica capillary (50 num inner diameter, 30 cm total length), and an applied voltage of -12 kV. This method is robust and efficient, with very high resolution for all peaks within a short analysis time of 10 min. Quantitatively, the method offers a limit of detection (LOD) of 0.2 nug/mL and a limit of quantitation (LOQ) of 0.5 nug/mL for both D-dopa and D-carbidopa, which is equivalent to 0.02% and 0.05% against the respective L-enantiomers. A linear relationship was found between the concentration of the analyte and the corresponding peak area in a range of 0.5-2.0 nug/mL.     

Preparation of a positively charged cellulose derivative chiral stationary phase with copolymerization reaction for capillary electrochromatographic separation of enantiomers

A positively charged chiral stationary phase (CSP) was prepared by chemically immobilizing cellulose 3,5-dimethylphenylcarbamate onto methacryloyldiethylenetriaminopropylated silica (MCDEAPS) via a radical copolymerization reaction. The prepared CSP was evaluated for enantiomer separation in nonaqueous capillary electrochromatography (CEC). Electroosmotic flow (EOF) generated on the prepared CSP could be significantly improved with introduction of positive charges into the CSP, and separation of enantiomers in CEC has been achieved with mobile phases of ethanol and hexane-ethanol, respectively. In addition, we investigated the solvent versatility of the immobilized CSP on enantioseparations in CEC and capillary liquid chromatography (CLC) due to the elimination of dissolution of chiral selector in a number of solvents. Chiral resolution of some enantiomers was improved by adopting tetrahydrofuran (THF) and chloroform as mobile-phase modifiers, respectively.     

Chiral separations in capillary high-performance liquid chromatography and nonaqueous capillary electrochromatography using helically chiral poly(diphenyl-2-pyridylmethyl methacrylate) as chiral stationary phase.

Enantioseparations in nonaqueous capillary electrochromatography (CEC) are reported in this study for the first time, using wide-pore aminopropyl silica gel coated with helically chiral poly(diphenyl-2-pyridylmethyl methacrylate) (PDPM) as chiral stationary phase (CSP). The anodic electroosmotic flow (EOF) in a methanolic solution of ammonium acetate was used for the migration of neutral analytes through the packed bed in the capillaries. Four different techniques, high-performance liquid chromatography (HPLC) in common-size columns, capillary HPLC, pressure-assisted CEC and CEC were compared from the viewpoint of separation parameters. The latter three were performed with the same experimental setup, varying the relative contribution of the pressure-driven and the electrically driven flow to the overall mobility of the analyte. Capillary HPLC offers clear advantages compared to enantioseparations in common-size columns. However, for a given particle size of the packing material, CEC was not obviously advantageous compared to pressure-driven separations.     

Enantioseparations in non-aqueous capillary electrochromatography using polysaccharide type chiral stationary phases

Enantioseparations of chiral compounds with different structures were studied in non-aqueous capillary electrochromatography (NAQ CEC). Three different polysaccharide derivatives, cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD), amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) were used as chiral stationary phases (CSPs). Methanolic or ethanolic ammonium acetate solutions served as a mobile phase. The effect of the type of the CSP, the loading of the chiral selector on wide-pore aminopropyl derivatized silica gel and operational parameters such as apparent pH, applied voltage, etc. on the EOF and chromatographic characteristics (alpha, N, Rs) were studied. NAQ CEC represents a valuable alternative and an extension to chiral separations by HPLC with common-size columns as well as to capillary LC and CEC in aqueous buffers.     

A glycopeptide antibiotic chiral stationary phase for the enantiomer resolution of hydroxy acid derivatives by capillary electrochromatography

Separation of hydroxy acid enantiomers was achieved by using capillary electrochromatography (CEC) employing a chiral stationary phase (CSP) based on MDL 63,246 (Hepta-Tyr), a macrocyclic antibiotic of the teicoplanin family. The chiral selector was chemically bonded to 5 num diol-modified silica particles and the CSP mixed with amino silica (3:1 w/w) was packed into a 75 num ID fused-silica capillary. The CEC experiments were carried out by using an aqueous reversed-phase mode for the enantiomeric resolution of hydroxy acid compounds. Good enantioresolution was achieved for mandelic acid (MA), m-hydroxymandelic acid (m-OH-MA), p-OH-MA, and 3-hydroxy-4-methoxymandelic acid (3-OH-4-MeO-MA). The CEC system was less enantioselective towards 2-phenyllactic acid (2-PhL) and 3-PhL while mandelic acid methyl ester (MA-Et-Est) enantiomers were not resolved. Several experimental parameters, such as organic solvent type and concentration, buffer pH, capillary temperature, on enantioresolution factor, retention time, and retention factor were studied.     

Investigation of capillary electrochromatography with brush-type chiral stationary phases

Fused-silica capillaries (100 microm ID) were packed with the (3R, 4S)-Whelk-O chiral stationary phase (CSP) bonded on 3.0 microm silica particles. The enantiomers of 41 neutral analytes containing stereogenic centers, axes or planes were examined by packed capillary electrochromatography. More than 30 of these were cleanly resolved, owing to the selectivities and efficiencies afforded by this CSP. High reproducibility with no indication of diminished performance was observed using the same capillary for hundreds of runs (including intermediate change of the buffer system) over a period of several weeks. Acetate, 2-(N-morpholino)ethanesulfonic acid, or phosphate buffers, each modified with either acetonitrile or methanol, were used as mobile phases. The influence of buffer concentration, modifier amount, temperature, applied voltage, and pH on performance of the brush-type CSP was investigated.     

Vinylpyrrolidine-beta-cyclodextrin copolymer: a novel chiral selector for capillary electrophoresis.

The synthesis and characterization of a novel polymer consisting of an alkyl backbone and pendant beta-cyclodextrin units, obtained by radical copolymerization of vinylpyrrolidone and methacryloyl-beta-cyclodextrin (PVP-beta-CD), was reported. The ability of this copolymer to act as a capillary electrophoresis (CE) chiral selector was investigated in the separation of a mixture of basic drugs. The influence of polymeric cyclodextrin concentration, temperature, and pH on the separation of the test analytes was assessed and the advantage of using the polymeric selector over native beta-cyclodextrin was demonstrated.     

Chiral separations by open tubular capillary electrokinetic chromatography.

The inner walls of 50 microns fused-silica capillaries are etched by ammonium hydrogendifluoride and then modified by the silanization/hydrosilation method with a chiral selector. Three different types of selectors were evaluated: lactone, beta-cyclodextrin and naphthylethylamine. Each of the bonded chiral stationary phases provided at least partial separation for one type of racemic solute. These results confirm that bonded organic moieties on the etched inner wall of a capillary can provided sufficient solute-bonded phase interactions to influence the retention of molecules driven through a capillary by electroosmosis or a combination of electroosmosis and electrophoretic mobility.