Analysis of ion-association reaction in aqueous solution and its utilization by capillary zone electrophoresis.

Electrophoretic migration of analytes in capillary zone electrophoresis (CZE) reflects the dissolved status of analytes in solution, and the electrophoretic mobility is controlled to develop the resolution among analytes by adding a "modifier" to the migrating solution. Such addition of modifier is essentially the utilization of molecular interactions. Precise measurement of electrophoretic mobility by CZE allows analyzing molecular interactions, and CZE apparatus is very useful for physicochemical measurements. This review focuses on the advantages on using CZE to analyze equilibrium reaction; the capillary electrophoretic method and mathematical analyses that apply acid dissociation and complex formation reactions are also validated. Ion association reactions are deeply related to analytical chemistry and separation science, and CZE has been used for the investigation of ion-ion interactions. Various types of interactions have been clarified through the CZE measurements: contributions of hydrophobicity, probability, and aromatic-aromatic interaction were quantitatively evaluated. Ion association reaction in aqueous solution also elucidates the stepwise reactions of liquid-liquid distribution of ion associates. Development and applications of ion association reaction in CZE analysis are also introduced.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

Determination of preservatives by integrative coupling method of headspace liquid-phase microextraction and capillary zone electrophoresis

An integrative coupling method of headspace liquid-phase microextraction (HS-LPME) and capillary zone electrophoresis (CZE) was proposed in this paper. In the method, a separation capillary was used to create a microextraction droplet of the running buffer solution of CZE, hold the droplet at the capillary inlet, extract analytes of sample solutions in the headspace of a sample vial, inject concentrated analytes into the capillary and separate the analytes by CZE. The proposed method was applied to determine the preservatives of benzoic acid and sorbic acid in soy sauce and soft drink samples, in which the running buffer solution of 50 mmol/L tetraborate (pH 9.2) was directly used to form the acceptor droplet at the capillary inlet by pressure, and the preservatives in a 6-mL sample solution containing 0.25 g/mL NaCl were extracted at 90°C for 30 min in the headspace of a 14-mL sample vial. Then the concentrated preservatives were injected into the capillary at 10 cm height difference for 20 s and separated by CZE. The enrichment factors of benzoic acid and sorbic acid achieved 266 and 404, and the limits of detection (LODs) were 0.03 and 0.01 μg/mL (S/N=3), respectively. The recoveries were in the range of 88.7-105%. The integrative coupling method of HS-LPME and CZE was simple, convenient, reliable and suitable for concentrating volatile and semi-volatile organic acids and eliminating matrix interferences of real samples.     

Novel polymer monolith microextraction using a poly(methacrylic acid-ethylene glycol dimethacrylate) monolith and its application to simultaneous analysis of several angiotensin II receptor antagonists in human urine by capillary zone electrophoresis

Novel polymer monolith microextraction (PMME) using a poly(methacrylic acid-ethylene glycol dimethacrylate) (poly(MAA-EGDMA)) monolith in conjunction with capillary zone electrophoresis (CZE) was developed for the determination of several angiotensin II receptor antagonists (ARA-IIs) in human urine. The extraction device consisted of a regular plastic syringe (1 mL), a poly(MAA-EGDMA) monolithic capillary (2 cm x 530 microm I.D.) and a plastic pinhead connecting the former two components seamlessly. The extraction was achieved by driving the sample solution through the monolithic capillary tube using a syringe infusion pump, and for the desorption step, an aliquot of organic solvent was injected via the monolithic capillary and collected into a vial for subsequent analysis by CZE. The best separation was realized at 25 kV using a buffer that consisted of 50% acetonitrile and 50% buffer solution (v/v) containing 10 mM disodium hydrogenphosphate (adjusted to pH 2.3 with 1M hydrochloric acid). The method was successfully applied to the determination of telmisartan (T), irbesartan (I) and losartan (L) in urine samples with candesartan (C) as internal standard, yielding the detection limit of 15-20 ng/mL. Close correlation coefficients (R>0.999) and excellent method reproducibility were obtained for all the analytes over a linear range of 0.08-3 microg/mL.     

On-line microwave-induced helium plasma atomic emission detection for capillary zone electrophoresis

We report a feasibility study on using a microwave-induced helium plasma atomic emission detector (MIP-AED) as an on-line detector in capillary zone electrophoresis (CZE). To couple CZE to MIP-AED, we used an ion exchange membrane capillary to connect the separation capillary to the interfacing capillary. The outlet end of the interfacing capillary was placed directly in the discharge tube of the MIP-AED system. The electroosmotic flow generated in the separation capillary carried the analytes and the electrolyte buffer solution through the interfacing capillary into the MIP-AED discharge tube where the analytes were detected. The performance of the CZE/MIP-AED system was evaluated with trimethyltin chloride, dimethyltin dichloride, n-propanol, and 2-butanone. The preliminary results indicate that the MIP-AED can be used in CZE to provide element-specific detection for target analytes.     

Capillary electrochromatography of peptides on a neutral porous monolith with annular electroosmotic flow generation

A new kind of monolithic capillary column was prepared for capillary electrochromatography (CEC) with a positively charged polymer layer on the inner wall of a fused-silica capillary and a neutral monolithic packing as the bulk stationary phase. The fused-silica capillary was first silanized with 3-glycidoxypropyltrimethoxysilane (GPTMS). Polyethyleneimine (PEI) was then covalently bonded to the GPTMS coating to form an annular positively charged polymer layer for the generation of electroosmotic flow (EOF). A neutral bulk monolithic stationary phase was then prepared by in situ copolymerization of vinylbenzyl chloride (VBC) and ethylene glycol dimethacrylate in the presence of 1-propanol and formamide as porogens. Benzyl chloride functionalities on the monolith were subsequently hydrolyzed to benzyl alcohol groups. Effects of pH on the EOF mobility of the column were measured to monitor the completion of reactions. Using a column with this design, we expected general problems in CEC such as irreversible adsorption and electrostatic interaction between stationary phase and analytes to be reduced. A peptide mixture was successfully separated in counter-directional mode CEC. Comparison of peptide separations in isocratic monolithic CEC, gradient HPLC and capillary zone electrophoresis (CZE) indicated that the separation in CEC is governed by a dual mechanism that involves a complex interplay between selective chromatographic retention and differential electrophoretic migration.     

Capillary electrophoresis of neurotransmitters using in-line solid-phase extraction and preconcentration using a methacrylate-based weak cation-exchange monolithic stationary phase and a pH step gradient

A novel approach for in-line solid-phase extraction capillary electrophoresis (SPE-CE) for basic analytes was developed. The method is based on the use of a weak cation-exchange monolith synthesised in situ in the front end of the CE capillary via photoinitiated polymerization to form poly(methacrylic acid-co-ethylene glycol dimethacrylate), which was used to create the SPE phase in-line with the CE separation capillary. The monolithic SPE material exhibited a surface area of 23.1 m2/g and a capacity of 403 nM for dopamine. Adsorption of the analytes as protonated, cationic species onto the SPE phase was achieved using an electrolyte of 6 mM phosphate and 12 mM sodium ion, buffered at pH 7.0, which is above the pKa of the monolith but below the pKa of the analytes. Elution of the analytes from the SPE phase was achieved using an electrolyte with a pH below that of the pKa of the monolith, namely 12 mM phosphate and 12 mM sodium ion, buffered at pH 3.0. Due to the discontinuous electrolyte combination, analytes were simultaneously eluted and focused as the electrophoretically mobilised pH step boundary moved through the SPE monolith, after which the analytes were separated by conventional CZE in the remainder of the capillary. Quantitative extraction from a solution of 0.5 microg/ml dopamine and epinephrine was achieved when flushing up to 15 column volumes of sample through the capillary. The limits of detection (S/N=3) for dopamine and epinephrine were 3.7 and 4.3 ng/ml, and this method provided a sensitivity enhancement for dopamine of 462 times compared to CZE using hydrodynamic injection. The developed method was used to preconcentrate a test mixture of neurotransmitters comprising dopamine, epinephrine, 5-hydroxytryptamine, metanephrine and also histamine. The applicability of this approach to real life samples was demonstrated by using a urine sample from a healthy person to detect dopamine at sub-ppm levels.     

Sensitive amperometric detection for capillary electrophoresis of phenol carbamates with in‐line thermal hydrolysis strategy

A strategy on amperometric detection for CZE of phenol carbamates as model analytes with a facile in‐line thermal hydrolysis was presented, in which a thermal hydrolysis, subsequent CZE separation and final column‐end amperometric detection were accomplished in an intact capillary. Key parameters of hydrolysis dynamics of carbamates and electrochemical detection of the hydrolysates were studied, as well as electrophoretic conditions. Under the optimal conditions, the capillary was utilized as chambers for in situ hydrolysis, CZE separation, and electrochemical detection. The successive separation of hydrolysates of five carbamates (propoxur, carbofuran, 3‐OH‐carbofuran, carbaryl and bendiocarb) were achieved within 17 min. Applied to vegetable samples, the recoveries of carbamates fortified at 0.02 and 0.05 mg/kg were ranging in 88–107.2 and 86.3–107.3%, respectively. The success in the implementation of such a scheme resulted in a simple instrument as compared with those current analytical methods with post‐column derivization or pre‐column hydrolysis, or online enrichment in chip, respectively. This protocol might possess a potential utility for the sensitive amperometric detection of phenol carbamates.     

Study of the Electrophoretic Behaviour of Flavonoids

The electrophoretic behaviour of 13 flavonoids commonly found in medicinal plants has been studied. The performance of two modes of separation, capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC), was assessed and compared. MEKC was found to be more effective for separation of the analytes. The effect of structure on the electrophoretic behaviour of the flavonoids is also discussed.     

Large-volume sample on-line concentration of angiotensins in non-aqueous capillary electrophoresis

A single step on-line concentration and separation method for peptides in non-aqueous capillary electrophoresis was developed. ACN containing 50 mM tetraethylammonium perchlorate was used as the electrophoretic medium; angiotensins I-IV were separated as a result of the differences in the magnitudes of their interactions with perchlorate anions. When the sample solution (ACN containing 0.5% trifluoroacetic acid and angiotensins) was injected as a large-volume plug, the analytes were concentrated at the inlet end of the capillary by both sweeping and stacking mechanisms; the separation procedure then started automatically without any operations such as polarity change. It was found that the concentration of analytes, injection period, and concentration of tetraethylammonium perchlorate in the electrophoretic medium were important factors for both separation and concentration efficiencies. The angiotensins were concentrated and separated with the large-volume injection of up to 80% of the effective capillary length.     

In‐capillary microextraction using monolithic polymers: Application to preconcentration of carbamate pesticides prior to their separation by MEKC

In the present work we report a novel procedure for in‐capillary microextraction using a monolithic polymeric sorbent. In the proposed methodology, sample treatment takes place in the CE instrument but in a different capillary from that used for the electrophoretic separation. Polymers based on butyl methacrylate and divinylbenzene formed in situ inside a capillary column were assayed. The best results were found with the divinylbenzene‐based polymers. The usefulness of the proposed procedure was checked for the determination of carbamate pesticides (Methomyl, Asulam, Carbendazim, Aldicarb, Carbetamide, Propoxur, Pirimicarb, Carbaryl, Carbofuran and Methiocarb) and three of their degradation compounds (Aldicarb sulphoxide, 2‐isopropoxyphenol and α‐naphthol) using MEKC. The optimization of the MEKC is reported, a good separation of the 13 analytes being obtained in less than 6 min. The analytical method using in‐capillary microextraction was validated in terms of linearity, repeatability, precision (RSD≤18% for 50 μg/L), and LODs (1–16 μg/L), and it revealed the usefulness of this in‐capillary preconcentration procedure for the determination of analytes of intermediate polarity.     

Separation of nicotine metabolites by capillary zone electrophoresis and capillary zone electrophoresis/mass spectrometry

The use of capillary zone electrophoresis (CZE) and capillary zone electrophoresis/mass spectrometry (CZE/MS) has been demonstrated, in principle, for the separation of nicotine and nicotine metabolites. The buffer system developed for separation and detection by CZE/UV was modified for use in CZE/MS analysis. Several of the metabolites are isobaric and tandem mass spectrometric (MS/MS) techniques have been used to differentiate such analytes.     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

Iron protoporphyrin-modified monolithic support for on-line preconcentration of angiotensin prior to CE analysis

An on-line preconcentration method using a polymeric monolithic support is proposed for the retention of the decapeptide angiotensin I and its subsequent analysis by CZE. Monolithic capillary columns were prepared in fused-silica (FS) capillaries of 150 microm id by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iron protoporphyrin IX (Fe-ProP). Monolithic microcolumns (8 mm long) were coupled on-line to the inlet of the separation capillary (FS capillary, 75 microm id x10 cm from the inlet to the microcolumn and 27 cm from the microcolumn to the detector). Angiotensin I was released from the sorbent by a 50 mM sodium phosphate, pH 2.5/ACN, 75:25 v/v solution and then analyzed by CZE with UV absorption detection at 214 nm. The concentration LOQ (CLOQ) was 0.5 ng/mL. The Fe-ProP-derivatized monolithic microcolumn coupled to the separation capillary exhibited a high retention capacity for peptide angiotensin I, and showed as much as 10,000-fold improvement in concentration sensitivity.     

Salt effects in capillary zone electrophoresis. V. Adsorption and retention of electrically neutral analytes

Two electrically neutral analytes previously observed to be separated from the neutral marker in capillary zone electrophoresis (CZE) experiments [sulphanilamide (SAA) and sulphaguanidine (SGW)] have been examined to determine the basis for separation. The degree of separation increases markedly with buffer concentration and improves with increasing field strength. On the basis of the apparent electrophoretic mobilities in conventional CZE, migration times in a zero EOF environment were calculated for SAA, SGW and six other sulphonamides that were known to be ionized. These six markers were used to test the legitimacy of our predictions and to correct for small discrepancies between the predicted and observed migration times. It was concluded that SAA and SGW have negligible electrophoretic mobilities and that they are retained in the electrical double layer close to the capillary wall. A mechanism for adsorption is proposed and the generality of the phenomenon is discussed.     

Liposome electrokinetic capillary chromatography in the study of analyte-phospholipid membrane interactions. Application to pesticides and related compounds

Interactions between low-molar mass analytes and phospholipid membranes were studied by liposome electrokinetic capillary chromatography (LEKC). The analytes were pesticides, some degradation products, and compounds associated with the manufacture of pesticides. Negatively charged liposome dispersions with different zwitterionic lipids (PC) were applied to the determination of retention factors (k) of 15 charged and uncharged compounds. The liposome dispersions consisted of 80:20 mol% of 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/POPS, and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/POPS. Retention factors were calculated from the effective electrophoretic mobilities of the analytes under LEKC and CZE conditions and from the effective electrophoretic mobilities of the liposomes, determined by CZE with a polyacrylamide-coated capillary. Determining the liposome mobilities in this way proved to be a good alternative to the conventional method employing a liposome marker compound. The log k values of the analytes for the different liposome dispersed phases were correlated with one another. In addition, correlation curves were determined between log k and calculated octanol-water partition coefficients. The results showed that the zwitterionic phospholipid in the liposome has a major impact on the interactions between the tested compounds and the lipid membranes.     

Theoretical models of separation selectivity for charged compounds in micellar electrokinetic chromatography

Equations and theoretical models for MEKC separation selectivity (α(MEKC) ) were established to explain a change in separation and electrophoretic mobility order of fully charged analytes, in which α(MEKC) is related to the dimensionless values of mobility selectivity in CZE (α(CZE)) and retention selectivity (α(k)) in MEKC, and where α(CZE) and α(k) are defined as the ratio of electrophoretic mobility in CZE and the ratio of retention factor (k) in MEKC for two charged analytes, respectively. Using four alkylparabens as test analytes, excellent agreement was found between the observed α(MEKC) and the proposed α(MEKC) models of test analytes in MEKC over a wide range of SDS concentrations and values of k. For example, in comparison with CZE separation of charged analytes, MEKC separation can enhance separation selectivity up to the maximum value when the selectivity ratio (ρ) is greater than 1.0 (ρ=α(k)/α(CZE)), while lower separation selectivity is obtained with ρ<1.0 (α(CZE) >α(k) >1).     

Electrophoretic behaviour of oligonucleotides and mono-, di- and triphosphate nucleotides by capillary zone electrophoresis

A systematic investigation has been made into the mechanisms of the capillary zone electrophoresis (CZE) separation of 12 common nucleotides (mono-, di- and triphosphorylated) and polydeoxythymidylic acid oligonucleotides (pd(T)5-18) using electrophoretic mobility values calculated from migration time data. Relationships between electrophoretic mobility and the physicochemical characteristics of the analytes (charge, dissociation constants, charge-to-mass ratio) and the background electrolyte conditions (buffer strength, percentage organic modifier and buffer pH) were characterised. Nucleotide migration was dominated by the negatively charged phosphate groups. Additionally, there were important contributions to migration behaviour from the ionised amide groups of the nucleobases guanine and uracil at higher buffer pH values or with the presence of methanol in the electrolyte. Calculated electrophoretic mobility values for the nucleotides showed a substantially improved (5-fold) inter-run repeatability compared with migration time data. These studies show the value of representing nucleotide migration data as electrophoretic mobility in CZE for obtaining a more thorough analysis of separation mechanisms and to compensate for variation in migration time data caused by small changes in electrosmotic flow. Oligonucleotides pd(T)5-11 could be adequately resolved from their nearest neighbour, but the limit of single-base separation was pd(T)10 from pd(T)11 under the conditions used. It was calculated that a difference in charge-to-mass ratio of 2.64 x 10(-5) was required for resolution under the CZE conditions used.     

Combining poly (methacrylic acid‐co‐ethylene glycol dimethacrylate) monolith microextraction and octadecyl phosphonic acid‐modified zirconia‐coated CEC with field‐enhanced sample injection for analysis of antidepressants in human plasma and urine

A method based on poly (methacrylic acid‐co‐ethylene glycol dimethacrylate) monolith microextraction and octadecylphosphonic acid‐modified zirconia‐coated CEC followed by field‐enhanced sample injection preconcentration technique was proposed for sensitive CE‐UV analysis of six antidepressants (doxepin, clozapine, imipramine, paroxetine, fluoxetine and chlorimipramine) in human plasma and urine. A poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) monolithic capillary column was introduced for the extraction of antidepressants from urine and plasma samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the desorption solvent, which normally provided an excellent medium to ensure direct compatibility for field‐enhanced sample injection in CE, was analyzed by CE directly. By the use of alkylphosphonate‐modified zirconia‐coated CEC for separation of the basic compounds of antidepressants, high separation efficiency and resolution were achieved because that both hydrophobic interaction between analytes and alkylphosphonate‐modified zirconia coat and electrophoretic effect work on the separation of antidepressants. The best separation was achieved using a buffer composed of 0.3 M ammonium acetate (adjusted to pH 4.5 with 1 M acetic acid) and 35% ACN v/v, with a temperature and voltage of 20°C and 20 kV, respectively. By applying both preconcentration procedures, LODs of 11.4–51.5 and 3.7–17.0 μg/L were achieved for the six antidepressants in human plasma and urine, respectively. Excellent method of reproducibility was found over a linear range of 50–5000 μg/L in plasma and urine sample.     

Preparation of a neutral porous monolith and its evaluation in pressurized capillary electrochromatography with neutral and charged solutes

A neutral, nonpolar monolithic capillary column was evaluated as a hydrophobic stationary phase in pressurized CEC system for neutral, acidic and basic solutes. The monolith was prepared by in situ copolymerization of octadecyl methacrylate and ethylene dimethacrylate in a binary porogenic solvent consisting of cyclohexanol/1,4‐butanediol. EOF in this hydrophobic monolithic column was poor; even the pH value of the mobile phase was high. Because of the absence of fixed charges, the monolithic capillary column was free of electrostatic interactions with charged solutes. Separations of neutral solutes were based on the hydrophobic mechanism with the pressure as the driving force. The acidic and basic solutes were separated under pressurized CEC mode with the pressure and electrophoretic mobility as the driving force. The separation selectivity of charged solutes were based on their differences in electrophoretic mobility and hydrophobic interaction with the stationary phase, and no obvious peak tailing for basic analytes was observed. Effects of the mobile phase compositions on the retention of acidic compounds were also investigated. Under optimized conditions, high plate counts reaching 82 000 plates/m for neutral compounds, 134 000 plates/m for acid compounds and 150 000 plates/m for basic compounds were readily obtained.