Development of a carbon quantum dots-based fluorescent Cu2+ probe suitable for living cell imaging

An efficient strategy for selective fluorescent detection of Cu(2+) was developed based on the carbon quantum dots (CQDs) nanoconjugated with a specific organic molecule, amino TPEA, and further applied to intracellular sensing and imaging of Cu(2+) as a consequence of the fluorescence properties and the established low cytotoxicity of CQDs.     

Development of an ICT-based ratiometric fluorescent hypochlorite probe suitable for living cell imaging

We have judiciously constructed a novel ICT-based ratiometric OCl(-) probe capable of ratiometric imaging in the live cells based on the new OCl(-)-promoted de-diaminomaleonitrile reaction.     

Near-infrared cell-permeable Hg2+-selective ratiometric fluorescent chemodosimeters and fast indicator paper for MeHg+ based on tricarbocyanines

Three tricarbocyanine dyes (IR‐897, IR‐877, and IR‐925) with different thiourea substituents that function as dosimeter units through specific Hg²⁺‐induced desulfurization have been demonstrated in a fast indicator paper for Hg²⁺ and MeHg⁺ ions. In comparison with available Hg²⁺‐selective chemodosimeters, IR‐897 and IR‐877 show several advantages, such as convenient synthesis, very long wavelengths falling in the near‐infrared (NIR) region (650–900 nm) with high molar extinction coefficients, a ratiometric response, and quite low disturbance with Ag⁺ and Cu²⁺ ions. They exhibit large redshifts, which result in a clear color change from deep blue to pea green that can be easily monitored by the naked eye for a convenient indicator paper. In emission spectra, they display a characteristic turn‐off mode at 780 nm and turn‐on mode at 830 nm with titration of Hg²⁺ ions. Remarkably, the signal/noise (S/N) ratio with other thiophilic metal ions (Ag⁺ and Cu²⁺) is greatly enhanced with ratiometric measurement of two channels: excitation spectra mode (I_{810 nm}/I_{670 nm}, monitored at 830 nm) and emission spectra mode (I_{830 nm}/I_{780 nm}, isosbestic absorption point at 730 nm as excitation). The distinct response is dependent upon the electron‐donating effect of the thiourea substituents; that is, the stronger the electron‐donating capability of the thiourea substituents, the faster the Hg²⁺‐promoted cyclization. Additionally, experiments with living SW1116 cells show that these three tricarbocyanine dyes with low toxicity can exhibit special characteristics that are favorable for visualizing intracellular Hg²⁺ and MeHg⁺ ions in biological systems, including excellent membrane permeability, minimal interfering absorption and fluorescence from biological samples, low scattering, and deep penetration into tissues.     

A FRET-based fluorescent Zn2+ sensor: 3D ratiometric imaging,flow cytometric tracking and cisplatin-induced Zn2+ fluctuation monitoring

Monitoring labile Zn²⁺ homeostasis is of great importance for the study of physiological functions of Zn²⁺ in biological systems. Here we report a novel ratiometric fluorescent Zn²⁺ sensor, CPBT, which was constructed based on chelation-induced alteration of FRET efficiency. CPBT was readily cell membrane permeable and showed a slight preferential localization in the endoplasmic reticulum. With this sensor, 3D ratiometric Zn²⁺ imaging was first realized in the head of zebra fish larvae via Z-stack mode. CPBT could track labile Zn²⁺ in a large number of cells through ratiometric flow cytometric assay. More interestingly, both ratiometric fluorescence imaging and flow cytometric assay demonstrated that the labile Zn²⁺ level in MCF-7 cells (cisplatin-sensitive) decreased while that in SKOV3 cells (cisplatin-insensitive) increased after cisplatin treatment, indicating that Zn²⁺ may play an important role in cisplatin induced signaling pathways in these cancer cells.

A Zn²⁺ sensor exhibiting 3D ratiometric imaging and flow cytometric ability was constructed based on the FRET mechanism, and cisplatin-induced endogenous labile Zn²⁺ fluctuations were monitored in real time.     

Development of FRET-based dual-excitation ratiometric fluorescent pH probes and their photocaged derivatives

Dual-excitation ratiometric fluorescent probes allow the measurement of fluorescence intensities at two excitation wavelengths, which should provide a built-in correction for environmental effects. However, most of the small-molecule dual-excitation ratiometric probes that have been reported thus far have shown rather limited separation between the excitation wavelengths (20-70 nm) and/or a very small molar absorption coefficient at one of the excitation wavelengths. These shortcomings can lead to cross-excitation and thus to errors in the measurement of fluorescence intensities and ratios. Herein, we report a FRET-based molecular strategy for the construction of small-molecule dual-excitation ratiometric probes in which the donor and acceptor excitation bands exhibit large separations between the excitation wavelengths and comparable excitation intensities, which is highly desirable for determining the fluorescence intensities and signal ratios with high accuracy. Based on this strategy, we created a coumarin-rhodamine FRET platform that was then employed to develop the first class of FRET-based dual-excitation ratiometric pH probes that have two well-resolved excitation bands (excitation separations>160 nm) and comparable excitation intensities. In addition, these pH probes may be considered as in a kind of "secured ratioing mode". As a further application of these pH probes, the dual-excitation ratiometric pH probes were transformed into the first examples of photocaged dual-excitation ratiometric pH probes to improve the spatiotemporal resolution. It is expected that the modular nature of our FRET-based molecular strategy should render it applicable to other small-molecule dual-dye energy-transfer systems based on diverse fluorescent dyes for the development of a wide range of dual-excitation ratiometric probes with outstanding spectral features, including large separations between the excitation wavelengths and comparable excitation intensities.     

Construction of a FRET-based ratiometric fluorescent thiol probe

We have rationally constructed a novel FRET-based ratiometric thiol probe suitable for ratiometric imaging in living cells based on the native chemical ligation reaction.     

A FRET-based fluorescent probe for imaging H2S in living cells

A FRET-based fluorescence probe was developed for selective detection of H₂S in aqueous buffer and inside living cells. For this probe, the FRET probe could be cleaved by H₂S, and the fluorescence of FRET donor is released. The probe is highly selective to H₂S over other biologically relevant species to give color change for naked eye observation. Confocal imaging indicated that the probe could monitor intracellular H₂S level changes.     

A ratiometric fluorescent chemosensor for iron: discrimination of Fe2+ and Fe3+ and living cell application

A newly designed probe, 6-thiophen-2-yl-5,6-dihydrobenzo[4,5]imidazo-[1,2-c] quinazoline (HL(1)) behaves as a highly selective ratiometric fluorescent sensor for Fe(2+) at pH 4.0-5.0 and Fe(3+) at pH 6.5-8.0 in acetonitrile-HEPES buffer (1/4) (v/v) medium. A decrease in fluorescence at 412 nm and increase in fluorescence at 472 nm with an isoemissive point at 436 nm with the addition of Fe(2+) salt solution is due to the formation of mononuclear Fe(2+) complex [Fe(II)(HL)(ClO(4))(2)(CH(3)CN)(2)] (1) in acetonitrile-HEPES buffer (100 mM, 1/4, v/v) at pH 4.5 and a decrease in fluorescence at 412 nm and increase in fluorescence at 482 nm with an isoemissive point at 445 nm during titration by Fe(3+) salt due to the formation of binary Fe(3+) complex, [Fe(III)(L)(2)(ClO(4))(H(2)O)] (2) with co-solvent at biological pH 7.4 have been established. Binding constants (K(a)) in the solution state were calculated to be 3.88 × 10(5) M(-1) for Fe(2+) and 0.21 × 10(3) M(-1/2) for Fe(3+) and ratiometric detection limits for Fe(2+) and Fe(3+) were found to be 2.0 μM and 3.5 μM, respectively. The probe is a "naked eye" chemosensor for two states of iron. Theoretical calculations were studied to establish the configurations of probe-iron complexes. The sensor is efficient for detecting Fe(3+)in vitro by developing a good image of the biological organelles.     

A ratiometric fluorescent probe for imaging hydroxyl radicals in living cells

A novel fluorescent probe, the detection mechanism of which is based on the 'on-off' switching of a FRET triggered by the *OH-induced cleavage of a DNA strand, has been developed for the ratiometric imaging of *OH.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

A 4-hydroxynaphthalimide-derived ratiometric fluorescent chemodosimeter for imaging palladium in living cells

A highly selective ratiometric fluorescent chemodosimeter derived from 4-hydroxynaphthalimide was designed and synthesized to image palladium species in living cells by virtue of a palladium-catalyzed depropargylation reaction, and it could monitor three typical palladium species (0, + 2 and + 4) without additional reagents.     

Self-organized fluorescent nanosensors for ratiometric Pb2+ detection

Silica nanoparticles (60 nm diameter) doped with fluorescent dyes and functionalized on the surface with thiol groups have been proved to be efficient fluorescent chemosensors for Pb2+ ions. The particles can detect a 1 microM metal ion concentration with a good selectivity, suffering only interference from Cu2+ ions. Analyte binding sites are provided by the simple grafting of the thiol groups on the nanoparticles. Once bound to the particles surface, the Pb2+ ions quench the emission of the reporting dyes embedded. Sensor performances can be improved by taking advantage of the ease of production of multishell silica particles. On one hand, signaling units can be concentrated in the external shells, allowing a closer interaction with the surface-bound analyte. On the other, a second dye can be buried in the particle core, far enough from the surface to be unaffected by the Pb2+ ions, thus producing a reference signal. In this way, a ratiometric system is easily prepared by simple self-organization of the particle components.     

A ratiometric fluorescent core-shell nanoprobe for sensing and imaging of zinc(II) in living cell and zebrafish

A zinc(II)-responsive ratiometric fluorescent core-shell nanoprobe (referred to as QPNPs) is described. It consist of an optimized combination of an internal reference dye (TBAP) encapsulated in the core, and a Zn(II)-specific indicator dye (PEIQ) in the shell. The nanoprobe was synthesized via single-step graft copolymerization induced by tert-butyl hydroperoxide at 80 °C. QPNPs exhibit a well-defined core-shell nanostructure and well-resolved dual emissions after photoexcitation at 380 nm. After exposure to Zn(II), the QPNPs display a green fluorescence peaking at ~500 nm that increases with the concentration of Zn(II), while the pink fluorescence of the porphine-derived reference dye peaking at ~650 nm remains unchanged. This results in color change from pink to green and thus enables Zn(II) to be detected both spectroscopically and with bare eyes. Zn(II) can be quantified with a 3.1 nM detection limit. The core-shell structured nanoprobe was also applied to real-time imaging of Zn(II) in living HeLa cells and in zebrafish. This work establishes a reliable approach to synthesize ratiometric fluorescent nanoprobes. It enables such nanoprobes to be prepared also by those not skilled in nanomaterial synthesis.

Open image in new window

Graphical abstract A zinc(II)-responsive core-shell nanoprobe (referred to as QPNP) is synthesized via single-step graft copolymerization. Zn(II) can be quantitated with a 3.1 nM detection limit by the QPNPs through ratiometric fluorescence strategy (PEIQ as the Zn(II) indicator and TBAP as the reference dye).

     

A naphthalene-based Al3+ selective fluorescent sensor for living cell imaging

An efficient fluorescent Al(3+) receptor, N-(2-hydroxy-1-naphthalene)-N'-(2-(2-hydroxy-1-naphthalene)amino-ethyl)-ethane-1,2-diamine (L) has been synthesized by the condensation reaction between 2-hydroxy naphthaldehyde and diethylenetriamine. High selectivity and affinity of L towards Al(3+) in ethanol (EtOH) as well as in HEPES buffer at pH 7.4, makes it suitable to detect intracellular Al(3+) with fluorescence microscopy. Metal ions, viz. Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+) and Pb(2+) do not interfere. The lowest detection limit for Al(3+) is 3.0 × 10(-7) M and 1.0 × 10(-7) M in EtOH and HEPES buffer respectively.     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

FRET-based ratiometric fluorescent detection of arginine in mitochondrion with a hybrid nanoprobe

A ratiometric fluorescent hybrid nanoprobe CDs-1 for arginine(Arg),exhibiting high sensitivity(the limit of detection,LOD,being 6.5×10^-8 mol/L) and excellent selectivity and anti-interference ability,was fabricated through fluorescence resonance energy transfer(FRET) and the electrostatic attraction between positively-charged hemicyanine molecules and negatively-charged carbon dots(CDs).Arg can be quantitatively detected in the concentration range from 6.0×10^-5 mol/L to 2.7×10^-4 mol/L.Further,due to its ability to target mitochondrion and low cytotoxicity,intracellular Arg was succes s fully tracked through ratiometric fluorescence imaging.     

A highly selective colorimetric and ratiometric fluorescent chemodosimeter for imaging fluoride ions in living cells

A simple but highly selective colorimetric and ratiometric fluorescent chemodosimeter was designed and synthesized to detect fluoride ions (F(-)) in aqueous solution and living cells by virtue of the strong affinity of F(-) toward silicon.     

Highly green fluorescent Nb2C MXene quantum dots for Cu2+ ion sensing and cell imaging

Niobium carbide MXene quantum dots (Nb₂C MQDs) derived from 2D Nb₂CT_x (MXene) are the rising-star material recently. Herein, a sulfur and nitrogen co-doped Nb₂C MQDs (S, N-MQDs) were synthesized through a hydrothermal method. The obtained Nb₂C MQDs have excellent green fluorescence with a quantum yield (QY) of 17.25%. In addition, they exhibited excitation-dependent photoluminescence, anti-photobleaching and dispersion stability. They emit light at 520 nm when excited at 390 nm. The Nb₂C MQDs could be successfully applied to copper ion detection with detection limit of 2 μmol/L and Caco-2 cells imaging.