Ligand‐Enabled Alkynylation of C(sp3)−H Bonds with Palladium(II) Catalysts

The palladium(II)‐catalyzed β‐ and γ‐alkynylation of amide C(sp³)−H bonds is enabled by pyridine‐based ligands. This alkynylation reaction is compatible with substrates containing α‐tertiary or α‐quaternary carbon centers. The β‐methylene C(sp³)−H bonds of various carbocyclic rings were also successfully alkynylated.     

Palladium-catalyzed oxidative alkynylation of heterocycles with terminal alkynes under air conditions

Pd-Catalyzed oxidative alkynylation of azoles with terminal alkynes was developed via simultaneous activation of both heterocyclic sp(2) C-H and alkynyl sp C-H bonds. The choice of palladium catalyst source and external base resulted in being important factors for performing the reaction with high efficiency and selectivity, and air was successfully utilized as an environmental oxidant in the present alkynylation procedure.     

Radical‐Induced Metal‐Free Alkynylation of Aldehydes by Direct CH Activation

A direct C(sp²)?H alkynylation of aldehyde C(O)?H bonds with hypervalent iodine alkynylation reagents provides ynones under metal‐free conditions. In this method, 1‐[(triisopropylsilyl)ethynyl]‐1,2‐benziodoxol‐3(1H)‐one (TIPS‐EBX) constitutes an efficient alkynylation reagent for the introduction of the triple bond. The substrate scope is extended to a variety of (hetero)aromatic, aliphatic, and α,β‐unsaturated aldehydes.     

Palladium-catalyzed oxidative alkynylation of arene C–H bond using the chelation-assisted strategy

Palladium-catalyzed alkynylation of arene C–H bonds with (triisopropylsilyl)acetylene was developed for the first time under oxidative conditions in the present study. Among various type of directing groups examined, the N-phenyl-2-aminopyridine skeleton was shown to be most effective and selective for the Pd-catalyzed direct alkynylation reaction, and the desired alkynylated products were obtained in moderate to good yields.     

Iridium-Catalyzed β-Alkynylation of Aliphatic Oximes as Masked Carbonyl Compounds and Alcohols

An Ir-catalyzed C(sp³)−H alkynylation of aliphatic ketones, aldehydes, and alcohols was achieved by using the corresponding oxime derivatives and a Ir^III catalyst. This general reaction is selective towards primary C(sp³)−H bonds and can be used for the late-stage C−H alkynylation of complex molecules.     

Iridium‐Catalyzed β‐Alkynylation of Aliphatic Oximes as Masked Carbonyl Compounds and Alcohols

An Ir‐catalyzed C(sp³)?H alkynylation of aliphatic ketones, aldehydes, and alcohols was achieved by using the corresponding oxime derivatives and a Ir^III catalyst. This general reaction is selective towards primary C(sp³)?H bonds and can be used for the late‐stage C?H alkynylation of complex molecules.     

Directing‐Group‐mediated C−H‐Alkynylations

C?C triple bonds are amongst the most versatile functional groups in synthetic chemistry. Complementary to the Sonogashira coupling the direct metal‐catalyzed alkynylation of C?H bonds has emerged as a highly promising approach in recent years. To guarantee a high regioselectivity suitable directing groups (DGs) are necessary to guide the transition metal (TM) into the right place. In this Focus Review we present the current developments in DG‐mediated C(sp²)?H and C(sp³)?H modifications with terminal alkynes under oxidative conditions and with electrophilic alkynylation reagents. We will discuss further modifications of the alkyne, in particular subsequent cyclizations to carbo‐ and heterocycles and modifications of the DG in the presence of the alkyne.     

Palladium-catalyzed direct ethynylation of C(sp3)-H bonds in aliphatic carboxylic acid derivatives

The first catalytic alkynylation of unactivated C(sp(3))-H bonds has been accomplished. The method allows for the straightforward introduction of an ethynyl group into aliphatic acid derivatives under palladium catalysis. This new reaction can be applied to the rapid elaboration of complex aliphatic acids, for example, via azide/alkyne cycloaddition.     

Catalytic enantioselective alkynylation of prochiral sp3 C-H bonds adjacent to a nitrogen atom

[reaction: see text] The construction of chiral carbon centers via the first catalytic asymmetric alkynylation of prochiral CH2 groups was developed by using a copper-catalyzed double activation of sp3 and sp C-H bonds. Optically active 1-alkynylated tetrahydroisoquinolines were obtained by this method.     

Diels-Alder reaction of anthracene on carbosilane dendrimer

The dendritic macromolecule with 4, 8, 16 and 32 bicyclo end groups on the periphery has been created by the Diels-Alder reaction of anthracene and maleimide. The dendritic skeleton with triple bonds has been prepared by the hydrosilation and the alkynylation of bis(phenylethynyl)dimethylsilane as a core. The peripheral anthracene on dendrimers has been substituted by the reaction of chlorosilyl groups containing dendritic generations and 9-anthracenecarbinol. NMR and MALDI-TOF mass spectrum has characterized these Diels-Alder products.     

Visible Light-Enabled sp3-C−H Functionalization with Chloro- and Bromoalkynes: Chemoselective Route to Vinylchlorides or Alkynes

An unprecedented direct atom-economic chemo- and regioselective hydroalkylation of chloroalkynes and an sp³-C−H alkynylation of bromoalkynes was achieved. The reaction partners are unfunctionalized ethers, alcohols, amides, and even non-activated hydrocarbons. We found that a household fluorescent bulb was able to excite a diaryl ketone, which then selectively abstracts a H-atom from an sp³-C−H bond. The product of a formal alkyne insertion into the sp³-C−H bond was obtained with chloroalkynes, providing valuable vinyl chlorides. The photo-organocatalytic hydrogen atom transfer strategy gives rise to a broad range of diversely functionalized olefins. When bromoalkynes are applied in the presence of a base, a chemoselectivity switch to an alkynylation is observed. This reaction can even be performed for the alkynylation of unactivated sp³-C−H bonds, in this case with a preference of the more substituted carbon. Accompanying quantum chemical calculations indicate a vinyl radical intermediate with pronounced linear coordination of the carbon radical center, thus enabling the formation of both diastereoisomers after H-atom abstraction, suggesting that the (Z)-diastereoisomer is preferred, which supports the experimentally observed (E/Z)-distribution.     

Cobalt-mediated cross-coupling reactions of primary and secondary alkyl halides with 1-(trimethylsilyl)ethenyl- and 2-trimethylsilylethynylmagnesium reagents

[reaction: see text] This paper describes cobalt-mediated cross-coupling reactions of alkyl halides with 1-(trimethylsilyl)ethenylmagnesium bromide and 2-(trimethylsilyl)ethynylmagnesium bromide, respectively. The cobalt system allows for employing secondary as well as primary alkyl halides as the substrates. The reactions offer facile formations of alkyl-alkenyl and alkyl-alkynyl bonds. The reaction mechanism would include single-electron transfer from a cobalt complex to alkyl halide to generate the corresponding alkyl radical. The cobalt system thus enables sequential radical cyclization/alkenylation and cyclization/alkynylation reactions of 6-halo-1-hexene derivatives.     

Synthesis of Highly Functionalized Propargylic Alcohols: Direct Addition of Epoxy Acetylides to Aldehydes and Ketones

Direct nucleophilic addition of terminal alkynes comprising an epoxy group to aldehydes and ketones is reported with BuLi or lithium diisopropylamide for the generation of the corresponding lithium acetylides. This alkynylation reaction tolerates a wide variety of different functional groups (e.g., alcohols, silyl ethers, halides, double bonds) in the carbonyl compound, as well as in the acetylenic nucleophile, and furnishes highly functionalized propargylic alcohols in good‐to‐excellent yields. The method is particularly useful for the regioselective introduction of an epoxide function into multiply unsaturated target molecules.     

First total synthesis of murisolin

The first and concise total synthesis of murisolin (1) was accomplished using asymmetric alkynylation and Sonogashira coupling as the key steps. The threo/trans/threo-type THF ring moiety was constructed with excellent stereoselectivity by asymmetric alkynylation of 1,6-heptadiyne to alpha-tetrahydrofuranic aldehyde, which was also prepared via the asymmetric alkynylation.     

Iron(II)‐Catalyzed Site‐Selective Functionalization of Unactivated C(sp3)−H Bonds Guided by Alkoxyl Radicals

An alkoxyl radical guided strategy for site‐selective functionalization of unactivated methylene and methine C?H bonds enabled by an Fe^II‐catalyzed redox process is described. The mild, expeditious, and modular protocol allows efficient remote aliphatic fluorination, chlorination, amination, and alkynylation of structurally and electronically varied primary, secondary, and tertiary hydroperoxides with excellent functional‐group tolerance. The application for one‐pot 1,4‐hydroxyl functionalization of non‐oxygenated alkane substrates initiated by aerobic C?H oxygenation is also demonstrated.     

Density functional computations of alkynylation of ethanimine catalyzed by chiral zinc(II)‐complexes

The alkynylation of ethanimine catalyzed by chiral zinc(II)‐complexes was studied by means of the density functional theory (DFT). All the intermediates and transition states were optimized completely at the B3LYP/6‐31G(d,p) level. Calculation results confirm that the alkynylation of ethanimine is exothermic and the total released energy is about ?13 kJ/mol. The formation of the catalyst–alkynyl complexes M4 is the rate‐determining step for this alkynylation, and the formation of the catalyst–amine complexes M5 is the chirality‐limiting step for this alkynylation. The transition states for the chirality‐limiting step have a H? O? Zn? C? C? N six‐membered ring. The dominant products predicted theoretically for this alkynylation are, respectively, S‐amine for ethanimine anti and R‐amine for ethanimine syn . © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

亚胺及其类似物的催化不对称炔基化反应新进展

手性炔丙胺是天然产物和药物活性分子不对称全合成中常用的关键中间体,亚胺及其类似物的不对称炔基化反应可以为该砌块提供高效高对映选择性的合成路径;此外通过合理的底物和反应设计,亚胺的不对称炔基化反应还能作为一系列串联反应的起点,来合成多种结构新颖的含氮杂环化合物.因此,亚胺及其类似物的高效高对映选择性炔基化反应得到合成化学...     

Carbosilane dendrimers based on siloxane polymer

A method for synthesizing growth ring‐type dendritic macromolecules starting from siloxane polymer with Si H bonds [Me₃SiO(MeSiOH)_nSiMe₃] as the core and dichlorovinylsilane, dichloromethylsilane, lithium phenylacethylide, and allylmagnesium bromide as the building blocks is described. The siloxane polymer was produced to the second dendritic generation by the repetition of hydrosilation and alkenylation as well as by an alkynylation process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 724–729, 2000     

Photoinduced Remote Functionalization of Amides and Amines Using Electrophilic Nitrogen Radicals

The selective functionalization of C(sp³)?H bonds at distal positions to functional groups is a challenging task in synthetic chemistry. Reported here is a photoinduced radical cascade strategy for the divergent functionalization of amides and protected amines. The process is based on the oxidative generation of electrophilic amidyl radicals and their subsequent transposition by 1,5‐H‐atom transfer, resulting in remote fluorination, chlorination and, for the first time, thioetherification, cyanation, and alkynylation. The process is tolerant of most common functional groups and delivers useful building blocks that can be further elaborated. The utility of this strategy is demonstrated through the late‐stage functionalization of amino acids and a dipeptide.     

Systematic construction of a monotetrahydrofuran-ring library in annonaceous acetogenins by asymmetric alkynylation and stereodivergent tetrahydrofuran-ring formation

All eight diastereoisomers of the monotetrahydrofuran-ring cores of annonaceous acetogenins have been synthesized through utilization of asymmetric alkynylation and stereodivergent one-pot tetrahydrofuran-ring formation. In all cases, the asymmetric alkynylation proceeded with very high diastereoselectivity to give eight kinds of optically pure tetrahydrofuran core from a common alpha-oxyaldehyde. We also describe a comparison of the (1)H NMR, (13)C NMR, and CD spectral data of the eight isomers and give full details of the tetrahydrofuran-ring construction including a model study of asymmetric alkynylation.