纳米尺度氧化石墨烯层作为高效碳催化剂用于苄醇与芳香醛的绿色氧化

合成了纳米尺度氧化石墨烯(NGO)层,用作碳催化剂高效催化苄醇与芳香醛的氧化反应.对于醇氧化反应,当80℃时H2O2存在下,NGOs(20 wt％)可高效催化醇选择性生成醛,其反应速率和产率取决于醇上取代基的性质.对于4-硝基苄醇,反应24 h后,只有10％可转换为相应羧酸.相反,4-甲氧基苄醇和二苯基甲醇分别反应仅9和3h则可完全转化为对应的羧酸和酮.NGO碳催化剂上芳香醛氧化速率高于醇氧化速率.对于所有的醛,采用7 wt％ NGO作催化剂,在70℃反应2-3 h后,就可完全转化为相应羧酸.我们讨论了NGO催化剂结构对苄醇和芳香醛氧化反应影响的可能机理.     

Catalyzed oxidation of alcohols and aldehydes with iodosylbenzene

RuCl₂(PPh₃)₃ catalyzes oxidation of alcohols to carbonyi compounds by iodosylbenzene and that of aldehydes to carboxylic acids. Catalyzed oxidation of primary alcohols with phenyliodosodiacetate affords aldehydes.     

An efficient and practical system for the catalytic oxidation of alcohols, aldehydes, and alpha,beta-unsaturated carboxylic acids

Upon exposure to commercial bleach (approximately 5% aqueous sodium hypochlorite), nickel(II) chloride or nickel(II) acetate is transformed quantitatively into an insoluble nickel species, nickel oxide hydroxide. This material consists of high surface area nanoparticles (ca. 4 nm) and is a useful heterogeneous catalyst for the oxidation of many organic compounds. The oxidation of primary alcohols to carboxylic acids, secondary alcohols to ketones, aldehydes to carboxylic acids, and alpha, beta-unsaturated carboxylic acids to epoxy acids is demonstrated using 2.5 mol % of nickel catalyst and commercial bleach as the terminal oxidant. We demonstrate the controlled and selective oxidation of several organic substrates using this system affording 70-95% isolated yields and 90-100% purity. In most cases, the oxidations can be performed without an organic solvent, making this approach attractive as a "greener" alternative to conventional oxidations.     

Catalytic Oxidation of Alcohols to Corresponding Aldehydes or Ketones with TEMPO-Mediated Iodosobenzene in Water in the Presence of a Surfactant

An efficient, facile, and rapid oxidation of alcohols to the corresponding aldehydes or ketones with a stoichiometric amount of iodosobenzene (PhIO) in the presence of catalytic amounts of 2,2,6,6-tetramethyl-1-piperidinyloxyl free radical (TEMPO), KBr, and a surfactant, such as SDS (sodium dodecylsulfate), was reported. The oxidation proceeded in water at room temperature to afford aldehydes or ketones in excellent yields and high selectivity without overoxidation to carboxylic acids. Selective oxidation of primary alcohols in the presence of secondary alcohols was also achieved with the catalytic system of PhIO/TEMPO/KBr/SDS. A possible mechanism for the oxidation was supposed.     

Copper(II)-catalysed aerobic oxidation of primary alcohols to aldehydes

[CuBr2(2,2'-bipyridine)] catalyses the selective and very mild aerobic oxidation of primary alcohols to aldehydes in acetonitrile:water (2:1) in the presence of 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) and a base as cocatalysts.     

Ruthenium-catalyzed oxidative cleavage of olefins to aldehydes.

Three oxidation protocols have been developed to cleave olefins to carbonyl compounds with ruthenium trichloride as catalyst (3.5 mol %). These methods convert olefins that are not fully substituted to aldehydes rather than carboxylic acids. While aryl olefins were cleaved to aromatic aldehydes in excellent yields by using the system of RuCl3-Oxone-NaHCO3 in CH3CN-H2O (1.5:1), aliphatic olefins were converted into alkyl aldehydes with RuCl3-NaIO4 in 1,2-dichloroethane-H2O (1:1) in good to excellent yields. It is noteworthy that terminal aliphatic olefins were cleaved to the corresponding aldehydes in excellent yields by using RuCl3-NaIO4 in CH3CN-H2O (6:1).     

TEMPO-catalyzed aerobic oxidation of alcohols to aldehydes and ketones in ionic liquid [bmim][PF6

[reaction: see text]. A simple and mild TEMPO-CuCl catalyzed aerobic oxidation of primary and secondary alcohols to the corresponding aldehydes and ketones in ionic liquid [bmim][PF6] with no trace of overoxidation to carboxylic acids has been developed. The product can be isolated by a simple extraction with organic solvent, and the ionic liquid can be recycled or reused.     

A new oxidation of aldehydes to carboxylic acids

2-Hydroperoxyhexafluoro-2-propanol (HPHI) is a selective catalytic and stoichiometric reagent for the oxidation of aldehydes to acids under mildly basic conditions.     

General Method to Increase Carboxylic Acid Content on Nanodiamonds

Carboxylic acid is a commonly utilized functional group for covalent surface conjugation of carbon nanoparticles that is typically generated by acid oxidation. However, acid oxidation generates additional oxygen containing groups, including epoxides, ketones, aldehydes, lactones, and alcohols. We present a method to specifically enrich the carboxylic acid content on fluorescent nanodiamond (FND) surfaces. Lithium aluminum hydride is used to reduce oxygen containing surface groups to alcohols. The alcohols are then converted to carboxylic acids through a rhodium (II) acetate catalyzed carbene insertion reaction with tert–butyl diazoacetate and subsequent ester cleavage with trifluoroacetic acid. This carboxylic acid enrichment process significantly enhanced nanodiamond homogeneity and improved the efficiency of functionalizing the FND surface. Biotin functionalized fluorescent nanodiamonds were demonstrated to be robust and stable single-molecule fluorescence and optical trapping probes.     

A very mild and chemoselective oxidation of alcohols to carbonyl compounds

Efficient oxidation of primary alcohols and beta-amino alcohols to the corresponding aldehydes and alpha-amino aldehydes can be carried out at room temperature and in methylene chloride, using trichloroisocyanuric acid in the presence of catalytic TEMPO: aliphatic, benzylic, and allylic alcohols, and beta-amino alcohols are rapidly oxidized without no overoxidation to carboxylic acids. Secondary carbinols are slowly oxidized so that the reaction is highly chemoselective. Reaction: see text.     

Rhodium-catalyzed addition of alkynes to activated ketones and aldehydes

[reaction: see text] The rhodium-catalyzed addition of alkynes to 1,2-diketones, 1,2-ketoesters, and aldehydes provides a method for the synthesis of tertiary alkynyl alcohols under mild conditions. The reaction tolerates many functional groups (such as carboxylic acids) that are incompatible with other methods. The alkyne addition reaction proceeds best using bulky phosphine ligands such as 2-(di-tert-butylphosphino)biphenyl. This method fills a void in the more common zinc-catalyzed processes, which give poor yields with enolizable 1,2-dicarbonyl substrates.     

Facile Oxidation of Aldehydes to Carboxylic Acids with Chromium(V) Reagents

Recently we reported a convenient method of oxidation of alcohols to carbonyl compounds using chromium(V) reagents.¹ Although a variety of reagents are available for effecting this transformation, there are only a few reagents which have been successfully used for the oxidation of aldehydes to carboxyllc adds. Chromic acid, silver oxide and potassium permanganate are commonly employed for this purpose and reactions are performed in protic media under conditions which are not that mild.² The “non-aqueous” chromium(VI) reagent, pyridinium dichromate, recently reported by Corey³ oxidises alcohols and aldehydes to carboxylic acids in DMF at room temperature. Although Cr(V) species is postulated as an intermediate in all oxidations with Cr(VI), no systematic oxidation studies have been reported with these reagents. This note reports the results of some fruitful investigations on aldehyde → carboxylic acid conversion involving some “non-aqueous” chromium (V) complexes 1, 2, 3 and 5 under anhydrous conditions.     

N-heterocyclic carbene-catalyzed oxidation of unactivated aldehydes to esters

N-Heterocyclic carbenes catalyze the oxidation of unactivated aldehydes to esters with manganese(IV) oxide in excellent yield. The reaction proceeds through a transient activated alcohol, which when generated in situ allows for the selective oxidation of the aldehyde under mild conditions. These conditions successfully oxidize potentially epimerizable aldehydes and alcohols while preserving stereochemical integrity. A variety of ester derivatives can be synthesized with variation of the acylated alcohol as well as the unactivated aldehyde.     

HIGHLY SELECTIVE OXIDATION OF PRIMARY AND SECONDARY BENZYLIC ALCOHOLS BY KMnO4/ZrOCI2 8H2O IN DIETHYL ETHER

Zirconyl chloride octahydrate-potassium permanganate is used for highly selective and efficient oxidation of primary and secondary benzylic alcohols to the corresponding carbonyl compounds under mild condition. Over-oxidation of aldehydes to carboxylic acids and damage to carbon–carbon double bond is not observed by this method.     

Bis(trimethylsilyl)chromate catalyzed oxidations of alcohols to aldehydes and ketones with periodic acid

A facile, selective and high yielding bis(trimethylsilyl) chromate (BTSC) catalyzed selective oxidation of alcohols to aldehydes and ketones with periodic acid is reported.     

高效钴氧化物催化羧酸可控加氢制醇（英文）

羧酸选择加氢是合成醇的重要方法,廉价高效的催化体系仍然在探索中.我们利用地球上储量丰富的钴氧化物作为催化剂,通过控制催化反应过程,进而实现高选择性地催化羧酸加氢制备醇.一系列含有不同官能团的羧酸可以被选择加氢至相应的醇类化合物,反应选择性可以满足工业生产要求.通过一系列的谱学表征以及理论计算,我们证实了钴氧化物在羧酸选择加氢反应中的优选活性位点位为氧化亚钴,从而建立了催化剂与反应活性之间的构效关系,为催化剂的理性设计提供指导.首先,我们选取硬脂酸加氢反应作为模型反应,通过对地球上储量丰富的氧化镍、四氧化三铁和四氧化三钴的催化活性对比发现,四氧化三钴催化剂活性最高,在473 K,2 MPa氢气条件下,反应速率可以达到1.2 mmol/(h·g).对四氧化三钴催化剂进行不同温度的预还原处理,我们发现催化剂的活性得到显著提高,其中573 K还原的样品活性最高,反应速率可以达到7.3 mmol/(h·g),要远远高于贵金属催化剂Pd/C(0.6 mmol/(h·g))和Pt/C(1.8 mmol/(h·g)).XRD结果表明,随着还原处理温度的不断升高,催化剂由四氧化三钴变为氧化亚钴,最终变为金属态的钴.当还原温度为573 K时,催化剂的组成为单一相氧化亚钴.XPS测试结果表明,当还原温度为573 K时,样品中只含有Co~(2+)的信号峰,并且Co/O的比例为1/1,进一步证明样品是纯态的氧化亚钴.从TEM照片中可以发现,在原始的四氧化三钴样品中观察到晶面间距为0.467和0.244 nm,分别对应四氧化三钴的(111)和(311)晶面.而对于573 K还原的样品只观察到一种晶面间距(0.246 nm),对应氧化亚钴的(111)晶面.结合表征手段和硬脂酸催化加氢活性结果,我们得出氧化亚钴是573 K还原样品催化羧酸加氢反应的活性位点.理论计算结果进一步证实了这个实验结论.理论计算结果表明,在氧化亚钴(111)晶面,硬脂酸加氢转换为十八醇是非常快速和高效的,然而,对于氢解C-C键和C-O键,需要耗费更高的能量,能垒约为1.2 e V.因为硬脂酸的吸附远远强于十八醇的吸附,硬脂酸的存在会抑制十八醇氢解形成烯烃的反应,只有当硬脂酸酸完全转化为十八醇,才会发生随后的氢解反应.通过控制催化反应过程,可以实现在氧化亚钴(111)晶面高选择性催化酸加氢至醇,也就是反应控制催化过程.基于氧化亚钴在硬脂酸加氢制备十八醇上的优异催化性能,我们进一步研究了一系列含有不同官能团的羧酸化合物的催化加氢,发现氧化亚钴表现出良好的官能团容忍度,可以实现高效、广谱的酸选择加氢至醇反应.     

Polymer-supported nitroxyl radical catalyst for selective aerobic oxidation of primary alcohols to aldehydes

PS-TEMPO, a polymer-supported 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), was successfully applied as a recyclable, active and selective catalyst for the oxidation of primary aliphatic and benzylic alcohols to aldehydes by molecular oxygen in the presence of Co(NO3)2 and Mn(NO3)2 as co-catalysts.     

Efficient and Highly Selective Oxidation of Primary Alcohols to Aldehydes by N-Chlorosuccinimide Mediated by Oxoammonium Salts

2,2,6,6-Tetramethyl-1-piperidinyloxy catalyzes efficient oxidation of primary alcohols to aldehydes by N-chlorosuccinimide, in a biphasic dichloromethane-aqueous pH 8.6 buffer system in the presence of tetrabutylammonium chloride. Aliphatic, benzylic, and allylic alcohols are readily oxidized with no overoxidation to carboxylic acids. Secondary alcohols are oxidized to ketones with a much lower efficiency. Very high chemoselectivities are observed when primary alcohols are oxidized in the presence of secondary ones. Primary-secondary diols are selectively transformed into hydroxy aldehydes, with, in some cases, no detectable formation of the isomeric keto alcohols.     

CuCl catalyzed oxidation of aldehydes to carboxylic acids with aqueous tert-butyl hydroperoxide under mild conditions

Oxidation of aldehydes to the corresponding carboxylic acids can be performed highly efficiently at room temperature with 70% tert-butyl hydroperoxide (in water) in the presence of a catalytic amount of easily available ligand free CuCl in acetonitrile as solvent under very mild conditions. This oxidation protocol works well for various aldehydes including aliphatic aldehydes and aliphatic dialdehydes.     

Montmorillonite clay-catalyzed cyclotrimerization and oxidation of aliphatic aldehydes

A temperature-dependent equilibrium is observed for the cyclotrimerization of aliphatic aldehydes in the presence of Montmorillonite K10 clay, while aerobic oxidation of aliphatic aldehydes to the corresponding carboxylic acids is favored at room temperature in the presence of Montmorillonite KSF clay.