Simultaneous laser-induced fluorescence and contactless-conductivity detection for microfluidic chip

A combined detection system involving simultaneous LIF and contacfless-conductometric measurements at the same place of the microfluidic chip was described. The LIF measurement was designed according to the confocal principle and a moveable contactless-conduetivity detector was used in C^4D. Both measurements were mutually independent and advantageous in analyses of mixtures. Various experimental parameters affecting the response were examined and optimized. The performances were demonstrated by simultaneous detection of Rhodamine B. And the results showed that the combined detection system could be used sensitively and reliably.     

Dual fluorescence/contactless conductivity detection for microfluidic chip

A new dual detection system for microchip is reported. Both fluorescence detector (FD) and contactless conductivity detector (CCD) were combined together and integrated on a microfluidic chip. They shared a common detection position and responded simultaneously. A blue light-emitting diode was used as excitation source and a small planar photodiode was used to collect the emitted fluorescence in fluorescence detection, which made the device more compact and portable. The coupling of the fluorescence and contactless conductivity modes at the same position of a single separation channel enhanced the detection characterization of sample and offered simultaneous detection information of both fluorescent and charged specimen. The detection conditions of the system were optimized. K⁺, Na⁺, fluorescein sodium, fluorescein isothiocyanate (FITC) and FITC-labeled amino acids were used to evaluate the performance of the dual detection system. The limits of detection (LOD) of FD for fluorescein Na⁺, FITC, FITC-labeled arginine (Arg), glycine (Gly) and phenylalanine (Phe) were 0.02 μmol L⁻¹, 0.05 μmol L⁻¹, 0.16 μmol L⁻¹, 0.15 μmol L⁻¹, 0.12 μmol L⁻¹ respectively, and the limits of detection (LOD) of CCD achieved 0.58 μmol L⁻¹ and 0.39 μmol L⁻¹ for K⁺ and Na⁺ respectively.     

Cocaine detection by a mid-infrared waveguide integrated with a microfluidic chip

A germanium (Ge) strip waveguide on a silicon (Si) substrate is integrated with a microfluidic chip to detect cocaine in tetrachloroethylene (PCE) solutions. In the evanescent field of the waveguide, cocaine absorbs the light near 5.8 μm, which is emitted from a quantum cascade laser. This device is ideal for (bio-)chemical sensing applications.     

Fluorescent sensor array in a microfluidic chip

Miniaturization and automation are highly important issues for the development of high-throughput processes. The area of micro total analysis systems (muTAS) is growing rapidly and the design of new schemes which are suitable for miniaturized analytical devices is of great importance. In this paper we report the immobilization of self-assembled monolayers (SAMs) with metal ion sensing properties, on the walls of glass microchannels. The parallel combinatorial synthesis of sensing SAMs in individually addressable microchannels towards the generation of optical sensor arrays and sensing chips has been developed. [figure: see text] The advantages of microfluidic devices, surface chemistry, parallel synthesis, and combinatorial approaches have been merged to integrate a fluorescent chemical sensor array in a microfluidic chip. Specifically, five different fluorescent self-assembled monolayers have been created on the internal walls of glass microchannels confined in a microfluidic chip.     

Ultra-sensitive microfibre absorption detection in a microfluidic chip

We report a microfibre absorption sensor by using a 900 nm diameter silica microfibre embedded in a 125 μm wide microchannel with a detection length of 2.5 cm. Investigated by measuring the absorbance of methylene blue (MB), the sensor shows a detection limit down to 50 pM with excellent reversibility in a concentration range of 0-5 nM. The sensor has also been applied to bovine serum albumin (BSA) measurement, with a detection limit of 10 fg mL(-1). In addition, the sample volume requirement is merely 500 nL with a probing light power of about 150 nW, which is very promising for safe detection of single or a few molecules of biological specimens.     

Quantitative analysis of thiols in consumer products on a microfluidic CE chip with fluorescence detection

A microchip CE-based method for the quantification of the thiols mercaptoethanoic acid (MAA) and 2-mercaptopropionic acid (2-MPA) in depilatory cream and cold wave lotions was developed. The thiols were first derivatized with the fluorogenic reagent ammonium-7-fluorobenzo-2-oxa-1,3-diazole-4-sulfonate (SBD-F). The derivatives were separated within only 20 s by microchip CE and detected by their fluorescence. Conventional CE with diode array detection and LC with fluorescence detection were used for validation. The internal standard 3-mercaptopropionic acid (3-MPA) provided RSDs of multiple injections of only 4% or less for the MCE approach. LOD is 2 microM, LOQ 6 microM, and the linear range comprises nearly three decades of concentration starting at the LOQ.     

An osmotic micro-pump integrated on a microfluidic chip for perfusion cell culture

A novel microfluidic chip integrating an osmosis-based micro-pump was developed and used for perfusion cell culture. The micro-pump includes two sealed chambers, i.e., the inner osmotic reagent chamber and the outer water chamber, sandwiching a semi-permeable membrane. The water in the outer chamber was forced to flow through the membrane into the inner chamber via osmosis, facilitating continuous flow of fluidic zone in the channel. An average flow rate of 0.33 μL min⁻¹ was obtained within 50 h along with a precision of 4.3% RSD (n = 51) by using a 100 mg mL⁻¹ polyvinylpyrrolidone (PVP) solution as the osmotic driving reagent and a flow passage area of 0.98 cm² of the semi-permeable membrane. The power-free micro-pump has been demonstrated to be pulse-free offering stable flow rates during long-term operation. The present microfluidic chip has been successfully applied for the perfusion culture of human colorectal carcinoma cell by continuously refreshing the culture medium with the osmotic micro-pump. In addition, in situ cell immunostaining was also performed on the microchip by driving all the reagent zones with the integrated micro-pump.     

Semiconductor sensor embedded microfluidic chip for protein biomarker detection using a bead-based immunoassay combined with deoxyribonucleic acid strand labeling

Two major issues need to be addressed in applying semiconductor biosensors to detecting proteins in immunoassays. First, the length of the antibody on the sensor surface surpasses the Debye lengths (approximately 1 nm, in normal ionic strength solution), preventing certain specifically bound proteins from being tightly attached to the sensor surface. Therefore, these proteins do not contribute to the sensor’s surface potential change. Second, these proteins carry a small charge and can be easily affected by the pH of the surrounding solution. This study proposes a magnetic bead-based immunoassay using a secondary antibody to label negatively charged DNA fragments for signal amplification. An externally imposed magnetic force attaches the analyte tightly to the sensor surface, thereby effectively solving the problem of the analyte protein’s distance to the sensor surface surpassing the Debye lengths. In addition, a normal ion intensity buffer can be used without dilution for the proposed method. Experiments revealed that the sensitivity can be improved by using a longer DNA fragment for labeling and smaller magnetic beads as solid support for the antibody. By using a 90 base pair DNA label, the signal was 15 times greater than that without labeling. In addition, by using a 120 nm magnetic bead, a minimum detection limit of 12.5 ng mL⁻¹ apolipoprotein A1 can be measured. Furthermore, this study integrates a semiconductor sensor with a microfluidic chip. With the help of microvalves and micromixers in the chip, the length of the mixing step for each immunoassay has been reduced from 1 h to 20 min, and the sample volume has been reduced from 80 μL to 10 μL. In practice, a protein biomarker in a urinary bladder cancer patient’s urine was successfully measured using this technique. This study provides a convenient and effective method to measure protein using a semiconductor sensor.     

Studying protein-drug interaction by microfluidic chip affinity capillary electrophoresis with indirect laser-induced fluorescence detection

We developed a microfluidic chip-affinity CE method based on indirect LIF detection to study protein-drug interactions. The interaction between heparin and BSA was quantitatively studied, as a model system. In our method, sodium fluorescein was chosen as background, and redistilled water as marker to monitor EOF. The electrophoretic mobility changes of BSA were measured, with various concentrations of heparin added to the running buffer. Each run was completed within 80 s. The binding constant was determined to be (1.24 +/- 0.05) x 10(3) M(-1), which was in good agreement with that reported in the literature.     

化学发光检测在微流控芯片中的应用综述

综述了近年来化学发光检测在微流控芯片中的应用.指出微流控芯片(又称为"芯片实验室"或者"微型全分析系统")因具有小型化、集成化和自动化等特点而在近20年来日益受到关注,而化学发光检测具有仪器结构简单、背景噪音低、操作和维护成本低等优点,非常适合用作微流控芯片的检测手段.     

Electrochemical detection on electrowetting-on-dielectric digital microfluidic chip

In this work, the use of three-electrode electrochemical sensing system with an electrowetting-on-dielectric (EWOD) digital microfluidic device is reported for quantitative analysis of iodide. T-junction EWOD mixer device was designed using arrays of 50-μm spaced square electrodes for mixing buffer reagent and analyte droplets. For fabrication of EWOD chips, 5-μm thick silver EWOD electrodes were formed on a glass substrate by means of sputtering and lift-off process. PDMS and Teflon thin films were then coated on the electrodes by spin coating to yield hydrophobic surface. An external three-electrode system consisting of Au working, Ag reference and Pt auxiliary wires were installed over EWOD electrodes at the end of T-junction mixer. In experiment, a few-microliter droplets of Tris buffer and iodide solutions were moved toward the mixing junction and transported toward electrochemical electrodes by EWOD process. A short processing time within seconds was achieved at EWOD applied voltage of 300 V. The analyte droplets mixed with different concentrations were successfully analyzed by cyclic voltametry. Therefore, the combination of EWOD digital microfluidic and electrochemical sensing system has successfully been demonstrated for rapid chemical analysis with minimal reagent consumption.     

An acoustic wave sensor incorporated with a microfluidic chip for analyzing muscle cell contraction

We report the fabrication of a microfluidic chip or lab-on-a-chip integrated with a thickness-shear mode (TSM) acoustic wave sensor for muscle cell analysis. The sensor, essentially an AT-cut quartz crystal, serves as a detector for recording changes in acoustic wave properties occurring in an attached cardiomyocyte (single heart muscle cell) during its contraction and relaxation. Presumably, the changes resulted from alterations in viscoelastic properties (e.g. stiffness) of the cells. The effects of excitation electrode size, the presence of a microfluidic channel plate, and liquid loading on the sensor were first examined. Thereafter, muscle cell contraction analysis upon chemical stimuli were described. The potential of the chip for screening of cardiovascular drugs is discussed.     

Distillation and detection of SO2 using a microfluidic chip

A miniaturized distillation system is presented for separating sulfurous acid (H(2)SO(3)) into sulfur dioxide (SO(2)) and water (H(2)O). The major components of the proposed system include a microfluidic distillation chip, a power control module, and a carrier gas pressure control module. The microfluidic chip is patterned using a commercial CO(2) laser and comprises a serpentine channel, a heating zone, a buffer zone, a cooling zone, and a collection tank. In the proposed device, the H(2)SO(3) solution is injected into the microfluidic chip and is separated into SO(2) and H(2)O via an appropriate control of the distillation time and temperature. The gaseous SO(2) is then transported into the collection chamber by the carrier gas and is mixed with DI water. Finally, the SO(2) concentration is deduced from the absorbance measurements obtained using a spectrophotometer. The experimental results show that a correlation coefficient of R(2) = 0.9981 and a distillation efficiency as high as 94.6% are obtained for H(2)SO(3) solutions with SO(2) concentrations in the range of 100-500 ppm. The SO(2) concentrations of two commercial red wines are successfully detected using the developed device. Overall, the results presented in this study show that the proposed system provides a compact and reliable tool for SO(2) concentration measurement purposes.     

Highly sensitive fluorescence detection system for microfluidic lab-on-a-chip

We demonstrate a compact, low cost and practical fluorescence detection system for lab-on-a-chip applications. The system comprises a commercially available InGaN light emitting diode (501 nm) as light source, an organic or silicon photodiode detector, absorptive dye coated colour filters and linear and reflective polarisers. An injection moulded polystyrene microfluidic chip is used as the platform for fluorescence immunoassays for cardiac markers myoglobin and CK-MB. The optical limit of detection (LOD) is measured using a TransFluoSphere? suspension at 5.6 × 10(4) beads μl(-1) which can be equated to ～3 nM fluorescein equivalent concentration. The LOD for the human plasma immunoassays is measured as 1.5 ng ml(-1) for both myoglobin and CK-MB.     

Development of a photosystem II-based optical microfluidic sensor for herbicide detection

Herbicides are highly toxic for both human and animal health. The increased application of herbicides in agriculture during the last decades has resulted in the contamination of both soil and water. Herbicides, under illumination, can inhibit photosystem II electron transfer. Photosynthetic membranes isolated from higher plants and photosynthetic micro-organisms, immobilized and stabilized, can serve as a biorecognition element for a biosensor. The inhibition of photosystem II causes a reduced photoinduced production of hydrogen peroxide, which can be measured by a chemiluminescence reaction with luminol and the enzyme horseradish peroxidase. In the present work, a compact and portable sensing device that combines the production and detection of hydrogen peroxide in a single flow assay is proposed for herbicide detection.     

A portable and integrated nucleic acid amplification microfluidic chip for identifying bacteria

In this work, we developed a portable integrated microchip of loop-mediated isothermal nucleic acid amplification (LAMP). This chip, with sample-to-answer capability, could perform rapid DNA release, exponential signal amplification and naked-eye result read-out in single or multiplex format. We call it iμLAMP, namely integrated micro-LAMP, which was successfully used for point-of-care identification of bacteria.     

Viscosimeter on a microfluidic chip

In this work, a viscosimeter implemented on a microfluidic chip is presented. The physical principle of this system is to use laminar parallel flows in a microfluidic channel. The fluid to be studied flows side by side with a reference fluid of known viscosity. By using optical microscopy, the shape of the interface between both fluids can be determined. Knowing the flow rates of the two liquids and the geometrical features of the channel, the mean shear rate sustained by the fluid and its viscosity can thus be computed. Accurate and precise measurements of the viscosity as a function of the shear rate can be made using less than 300 microL of fluid. Several complex fluids are tested with viscosities ranging from 10(-)(3) to 70 Pa.s.     

Enantioselective analysis of melagatran via an LSPR biosensor integrated with a microfluidic chip

The impact of chiral compounds on pharmacological and biological processes is well known. With the increasing need for enantiomerically pure compounds, effective strategies for enantioseparation and chiral discrimination are in great demand. Herein we report a simple but efficient approach for the enantioselective determination of chiral compounds based on a localized surface plasmon resonance (LSPR) biosensor integrated with a microfluidic chip. A glass microfluidic chip with an effective volume of ～0.75 μL was fabricated for this application. Gold nanorods (AuNRs) with an aspect ratio of ～2.6 were self-assembled onto the surface of the inner wall of the chip to serve as LSPR transducers, which would translate the analyte binding events into quantitative concentration information. Human α-thrombin was immobilized onto the AuNR surface for enantioselective sensing of the enantiomers of melagatran. The proposed sensor was found to be highly selective for RS-melagatran, while the binding of its enantiomer, SR-melagatran, to the sensor was inactive. Under optimal conditions, the limit of detection of this sensor for RS-melagatran was found to be 0.9 nM, whereas the presence of 10?000-fold amounts of SR-melagatran did not interfere with the detection. To the best of our knowledge, this is the first demonstration of an LSPR-based enantioselective biosensor.