Temperature influence of nonionic polyethylene oxide and anionic polyacrylamide on flocculation and dewatering behavior of kaolinite dispersions

Nonionic polyethylene oxide (PEO) and anionic polyacrylamide (PAM) flocculation of kaolinite dispersions has been investigated at pH 7.5 in the temperature range 20-60 degrees C. The surface chemistry (zeta potential), particle interactions (shear yield stress), and dewatering behavior were also examined. An increase in the magnitude of zeta potential of kaolinite particles, in the absence of flocculant and at a fixed PEO and PAM concentration, with increasing temperature was observed. The zeta potential behavior of the flocculated particles indicated a decrease in the adsorbed polymer layer thickness, while at the same time, however, the adsorbed polymer density showed a significant increase with increasing temperature. These results suggest that polymer adsorption was accompanied by temperature-influenced conformation changes. The hydrodynamic diameter and supernatant solution viscosity of both polymers decreased with increasing temperature, consistent with a change in polymer-solvent interactions and conformation, prior to adsorption. The analysis of the free energy (DeltaG(ads)) of adsorption showed a strong temperature dependence and the adsorption process to be more entropically than enthalpically driven. The polymer conformation change and increased negative charge at the kaolinite particle surface with increasing temperature resulted in decreased polymer bridging and flocculation performance. Consequently, the shear yield stress and the rate and the extent of dewatering (consolidation) of the pulp decreased significantly at higher temperatures (>40 degrees C). The temperature effect was more pronounced in the presence of PEO than PAM, with 40 and 20 degrees C indicated as the optima for enhanced performance of the latter and former flocculants, respectively. The results demonstrate that a temperature-induced conformation change, together with polymer structure type, plays an important role in flocculation and dewatering behavior of kaolinite dispersions.     

Kinetics of polyelectrolyte adsorption onto polystyrene latex particle studied using electrophoresis: effects of molecular weight and ionic strength

The kinetics of the adsorption of a cationic polymer flocculant onto negatively charged polystyrene latex (PSL) particles were measured by means of electrophoresis as a function of the molecular weight of the polyelectrolyte and the ionic strength of the solution. In the experiment, the dispersion of bare PSL particles was mixed with a polyelectrolyte solution by means of end-over-end rotation in which the mixing intensity was evaluated in terms of the collision frequency between the colloidal particles. The rate of electrophoretic mobility of a PSL particle, which remained as a singlet, was measured against the mixing steps, which was equivalent to the time elapsed after the onset of flocculation. The shape of the kinetic curves is typical: a linear increase for a short period followed by a plateau, implying the saturation of the colloidal surface by the adsorbed polyelectrolyte. In the case of low ionic strength, the plateau value was dependent on the molecular weight of the polyelectrolyte. That is, a lower plateau value was detected when the molecular weight of the polyelectrolyte was smaller and its concentration was lower. However, the amount of adsorption was kinetically controlled only for the case of higher molecular weight. In the case of high ionic strength, the plateau value of electrophoresis was constant, regardless of the polyelectrolyte concentration and molecular weight. These data will ultimately be useful in further analysis of the flocculation behavior of colloidal particles with a polyelectrolyte.     

Influence of temperature on the adsorption of mellitic acid onto kaolinite

The adsorption of mellitic acid (benzene-1,2,3,4,5,6-hexacarboxylic acid) onto kaolinite was investigated at five temperatures between 10 and 70 degrees C. Mellitic acid adsorption increased with increasing temperature at low pH (below pH 5.5), but at higher pH, the effect of increasing temperature was to reduce the amount adsorbed. Potentiometric titrations were conducted, adsorption isotherms were measured over the same temperature range, and the data obtained were used in conjunction with adsorption edge and ATR-FTIR spectroscopic data to develop an extended constant capacitance surface complexation model of mellitic acid adsorption. A single set of reactions was used to model all data at the five temperatures studied. The model indicates that mellitic acid sorbs via outer-sphere complexation to surface hydroxyl (SOH) groups on the kaolinite surface rather than to permanent charge sites. The reactions proposed are SOH + L6- + 2H+ <-->[(SOH2)+(LH)5-]4- and SOH + L(6-) <--> [(SOH)(L)6-]6-. Thermodynamic parameters calculated from the temperature dependence of the equilibrium constants for these reactions indicate that the adsorption of mellitic acid onto kaolinite is accompanied by a large entropy increase.     

Competitive adsorption of anionic dyes onto DMOA modified MCM-41

Research on Chemical Intermediates - The single and binary adsorption of two anionic dyes Acid Yellow 17 (AY17) and Naphtol Green B (NGB) onto N–N–Dimethyl-n-octylamine (DMOA) modified...     

低分子量聚丙烯酰胺研究进展

综述了低分子量聚丙烯酰胺的合成方法及应用研究进展,同时对其未来的发展方向进行了展望.     

Preparation and characterization of an anionic dye-polycation molecular films by electrostatic layer-by-layer adsorption process

This communication reports the formation and characterization of self-assembled films of a low molecular weight anionic dye amaranth and polycation poly(allylamine hydrochloride) (PAH) by electrostatic alternating layer-by-layer (LBL) adsorption. It was observed that there was almost no material loss occurred during adsorption process. The UV-vis absorption and fluorescence spectra of amaranth solution reveal that with the increase in amaranth concentration in solution, the aggregated species starts to dominate over the monomeric species. New aggregated band at 600 nm was observed in amaranth-PAH mixture solution absorption spectrum. A new broad low intense band at the longer wavelength region, in the amaranth-PAH mixture solution fluorescence spectrum was observed due to the closer association of amaranth molecule while tagged into the polymer backbone of PAH and consequent formation of aggregates. The broad band system in the 650-750 nm region in the fluorescence spectra of different layered LBL films changes in intensity distribution among various bands within itself, with changing layer number and at 10 bilayer LBL films the longer wavelength band at 710 nm becomes prominent. Existence of dimeric or higher order n-meric species in the LBL films was confirmed by excitation spectroscopic studies. Almost 45 min was required to complete the interaction between amaranth and PAH molecules in the one-bilayer LBL film.     

Single-particle electrophoresis for studying the adsorption of cationic polymers onto anionic particles

Understanding the adsorption of polymers onto particles is crucial for many technological and biomedical applications. Even though polymer adsorption on particles is a dynamic process, most experimental techniques can only study the adsorption indirectly, in equilibrium and on the ensemble level. New analysis methods are required to overcome these limitations. We investigated the use of single-particle electrophoresis to study the adsorption kinetics of cationic polymers onto anionic particles and compared the resulting data to a theoretical model. In this approach, the electrophoretic mobility of single polystyrene (PS) particles, exposed to different concentrations of poly(2-guanidinoethyl methacrylate), was measured as a function of time. The polymer adsorption leads to an electrophoretic mobility change of the PS particle over time, from the initial negative value to a positive value at equilibrium. By fitting the kinetics data to the Langmuir model, the adsorption rate, desorption rate and equilibrium constant were determined. Finally, the adsorption kinetics of several other polymers was investigated. This showed that the presented technique enables direct analysis and comparison of the kinetics of polymer adsorption on the single-particle level.     

Spectroscopic investigation of the adsorption mechanisms of polyacrylamide polymers onto iron oxide particles

The mechanisms of high-molecular-weight polyacrylamide nonionic homopolymer and 25 mol% anionic acrylate-substituted copolymer adsorption onto iron oxide particles were investigated via DRIFT and UV-vis spectroscopies at three pH values (6, 8.5, and 11). While electrostatic interactions play an important role in charged polymer adsorption, this information is not spectroscopically available. At pH values above and below pH 8.5 (the isoelectric point for the anionic polymer), bidentate chelation and hydrogen bonding were the main adsorption mechanisms. At the isoelectric point, monodentate chelation was observed to be the main mode of adsorption, along with hydrogen bonding. For the nonionic polymer, in all cases, hydrogen bonding through the carbonyl group was the main mode of adsorption. The adsorption of both polymers conformed well to the Freundlich model, suggesting that the adsorbed polymer amount increases with increasing polymer concentration up to 7500 g/t solid, rather than approaching monolayer coverage. Spectroscopic evidence was found to suggest that hydrolysis of nonionic polyacrylamide occurs at high pH.     

Sodium polyacrylate adsorption onto anionic and cationic silica in the presence of salts

Sodium polyacrylate is well known for its application as a scale inhibitor in common household products, and the effects of both monovalent and divalent metal cations on its structure have been covered by a range of previous publications. In the present article, we extend this work by using solvent relaxation NMR to look at the adsorption of the polyelectrolyte onto both positively and negatively charged silica and how this is altered by calcium chloride. In the anionic case, we found that polyacrylate adsorption was predictably very weak, and interestingly, perhaps counterintuitively, it was further reduced by calcium ions. This is probably linked to NaPA-Ca2+ binding, which changes the conformation and charge of the polyelectrolyte. In contrast, NaPA adsorbs very strongly on cationic silica, to the point that precipitation often occurs, particularly on addition of salt.     

Effect of cationic polyacrylamide adsorption kinetics and ionic strength on precipitated calcium carbonate flocculation

The effect of polymer adsorption kinetics and ionic strength on the dynamics of particle flocculation was quantified using a model system consisting of precipitated calcium carbonate (PCC) and cationic polyacrylamide (CPAM) at a low shear rate. All early flocculations detectable by a photodispersion analyzer (PDA) happened in nonequilibrium polymer adsorption regimes. We observed discrepancies in flocculation rates with the surface coverage theory, which is based on a simple monolayer adsorption model, in both early and late flocculation stages. For instance, the same amount of adsorbed CPAM reached at different polymer doses demonstrated different flocculating capabilities. This highlighted the importance of polymer adsorption kinetics upon flocculation. The transient conformation of the adsorbed CPAM during the kinetic process sometimes even superceded the adsorbed amount in the determination of PCC flocculation. Both antagonistic and synergetic effects of increased ionic strength on the CPAM-induced PCC aggregation were observed during early flocculation. However, late-stage PCC flocculation shared some similarities, irrespective of polymer dose and ionic strength. Despite the decreased amount of adsorbed polymer from the increased ionic strength, the combination of CPAM and salt, at certain concentrations, demonstrated a synergy to promote PCC aggregation more efficiently than the same amount of the respective components.     

Determination of the molecular weight of polyacrylamide fractions by osmometry

The polymerization of acrylamide, initiated with permanganate/oxalic acid, has been studied at 35 ± 0.2 in an aqueous medium under nitrogen. Samples of polyacrylamide were fractionated by the triangular fractionation method using methanol as non-solvent. Molecular weights of the fractions have been determined by viscometry and osmometry. Integral and differential distribution curves were plotted using the fractionation data. The narrow molecular weight distribution for high conversion polymers has been discussed. For fractionated samples of polyacrylamide in water at 30°, the equation $\text{[η]}{}_{\mathrm{ml/g}}\text{= 6.5 × 10}{}^{\mathrm{?3}}\text{M}{}_{\mathrm{n}}{}^{0.82}$ is applicable for the molecular weight range 4 × 10⁴ to 127 × 10⁴. This equation is very similar to the equation $\text{[η]}{}_{\mathrm{ml/g}}\text{= 6.31 × 10}{}^{\mathrm{?3}}\text{M}{}_{\mathrm{/}}{}^{0.80}$ of Scholtan. Other parameters (osmotic second virial coefficient and unperturbed dimension) have also been evaluated.     

Dynamic measurements of adsorption of hydrolyzed polyacrylamide (HPAM) onto hematite

The adsorption measurements of hydrolyzed polyacrylamide (HPAM) onto hematite suspension are carried out to study the dynamics of the polymer adsorption onto the suspension particles and to investigate the mode of the polymer adsorption. The polymer is found to show much affinity for the adsorption because of the opposite charges possessed by the polymeric flocculant and the suspension particles. Various adsorption parameters such as adsorption coefficient, the rate constants for the adsorption and desorption, are evaluated with the help of a recently proposed kinetic scheme. It is found that the extent of adsorption and the adsorption rate are adequately affected by increasing the pH of the suspension while, unexpectedly, the adsorption is found to show only a marginal increase on addition of Na₂SO₄. Both the amount of the adsorbed polymer and the adsorption rate are also found to increase with the degree of hydrolysis of the polyelectrolyte.     

Influence of the molecular architecture on the adsorption onto solid surfaces: comb-like polymers

The processes of adsorption of grafted copolymers onto negatively charged surfaces were studied using a dissipative quartz crystal microbalance (D-QCM) and ellipsometry. The control parameters in the study of the adsorption are the existence or absence on the molecular architecture of grafted polyethyleneglycol (PEG) chains with different lengths and the chemical nature of the main chain, poly(allylamine) (PAH) or poly(L-lysine) (PLL). It was found out that the adsorption kinetics of the polymers showed a complex behavior. The total adsorbed amount depends on the architecture of the polymer chains (length of the PEG chains), on the polymer concentration and on the chemical nature of the main chain. The comparison of the thicknesses of the adsorbed layers obtained from D-QCM and from ellipsometry allowed calculation of the water content of the layers that is intimately related to the grafting length. The analysis of D-QCM results also provides information about the shear modulus of the layers, whose values have been found to be typical of a rubber-like polymer system. It is shown that the adsorption of polymers with a charged backbone is not driven exclusively by the electrostatic interactions, but the entropic contributions as a result of the trapping of water in the layer structure are of fundamental importance.     

Molecular weight fractionation of humic substances by adsorption onto minerals

Molecular weight (MW) fractionation of Suwannee River fulvic acid (SRFA) and purified Aldrich humic acid (PAHA) by adsorption onto kaolinite and hematite was investigated in equilibrium and rate experiments with a size-exclusion chromatography system using ultraviolet (UV) light detection. The extent of adsorptive fractionation based on UV detection was positively correlated with the percent carbon adsorption for both humic substances (HS), although the specific fractionation pattern observed depended on the particular HS and mineral used. Higher MW fractions of SRFA, an aquatic HS, were preferentially adsorbed to both kaolinite and hematite whereas the fractionation trends for PAHA, a terrestrial peat HS, differed for the two minerals. The contrasting fractionation patterns for SRFA versus PAHA can be explained reasonably well by the different structural trends that occur in their respective MW fractions and the underlying adsorption processes. Rate studies of adsorptive fractionation revealed an initial rapid uptake of smaller HS molecules by the mineral surfaces, followed by their replacement at the surface by a much slower uptake of the larger HS molecules present in aqueous solution.     

水蒸气对高岭土高温吸附铅的影响

使用沉降炉开展了水蒸气对高岭土高温吸附铅影响的实验研究，其中铅的形态为PbO和PbCl₂两种。首先研究了0-20%水蒸气对高岭土吸附PbO（1100-1300 ℃）和PbCl₂（800-1300 ℃）的影响规律，然后基于XRD、SEM和残余羟基率等分析，掌握了水蒸气影响高岭土高温吸附的机理。结果表明，水蒸气可以减少高岭土表面羟基的高温脱落，从而阻碍了PbO吸附、促进了PbCl₂吸附。综合高温下惰性莫来石的出现和高岭土孔隙结构的坍塌等因素，PbO和PbCl₂的最佳吸附温度分别为1200和1000 ℃。     

Solvent‐assisted anionic ring opening polymerization of glycidol: Toward medium and high molecular weight hyperbranched polyglycerols

Hyperbranched polyglycerols (HPGs) are globular structures with a large number of functionalizable hydroxyl groups and have excellent in vitro and in vivo biocompatibility profiles comparable to polyethylene glycol. This work introduces a facile method for the synthesis of medium molecular weights (M_ws) (50–300 kDa) HPGs, which has been difficult to synthesize with low polydispersity, with the assistance of solvents by ring opening polymerization. The influence of different solvents (1,4‐dioxane, tetrahydropyran (THP), ethylene glycol diethyl ether (EGDE) and decane), solvent to glycidol ratio, concentration of glycidol and the time of polymerization on M_w and polydispersity of HPGs has been studied. The M_w and polydispersity of HPGs are significantly affected by the nature of the polymerization phase (homogeneous or heterogeneous) and chemical structure of the solvent. The differences in the solvation of the potassium cations and change in the nucleophilicity of the alkoxide anion in various solvents may be responsible for the changes in M_w and PDI of the HPG. The M_w of the HPG decreases in the order 1,4‐dioxane > THP > EGDE >decane. The microstructure, solution and thermal properties of the HPG do not depend on the nature of solvent. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2614–2621     

On distribution of molecular weight in anionic polymerizates of caprolactam

Measurement has been made of the dependence of the molecular weight distribution on the ratio of the catalytic system components and on the polymerization time for polycaprolactam obtained by anionic polymerization. A bimodal character of the curves was observed for products made using molar ratios of activator (N-benzoylcaprolactam) to initiator (sodium dihydro-bis(methoxyethoxy)aluminate) of 1:1 and 1:3, when the polymerization times were less than 1 hr. This course is explained by the influence of fast side-reactions, mainly condensations. For a ratio of 3:1 of the components of the catalytic system, smooth integral distribution curves are obtained, accounting for a very fast decrease in the strong base concentration in the initial stages of the polymerization.     

Modeling the adsorption of Cd(II) onto kaolinite and Muloorina illite in the presence of citric acid

The adsorption of cadmium onto kaolinite and Muloorina illite in the presence of citric acid has been measured as a function of pH and cadmium concentration at 25 degrees C. When citric acid is present in the systems cadmium adsorption is slightly enhanced below pH 5, but significantly suppressed between pH 5 and 8, for both substrates. At higher citric acid concentrations very little cadmium adsorbs onto kaolinite from pH 5 to 8. Above pH 8 adsorption of Cd(II) onto illite is enhanced in the presence of citric acid, especially at lower concentrations, but this does not occur for kaolinite. Adsorption and potentiometric titration data were fitted by simple extended constant-capacitance surface complexation models for the two substrates. Enhancement of adsorption at lower pH values was ascribed to the ternary reaction [X(-)--K(+)](0)+Cd(2+)+L(3-)+2H(+) right arrow over left arrow (0)+K(+) involving outer-sphere complexation with permanently charged X(-) sites on the "silica" faces of both clay minerals. The models suggested that suppression of adsorption in the intermediate pH range was due to the formation of a strong CdL(-) solution complex which adsorbed neither on the permanently charged sites nor on the surface hydroxyl groups at the edges of the clay crystals. At higher pH values the dominant solution complex, CdLOH(2-), apparently adsorbed as an outer-sphere complex at surface hydroxyl groups on illite, SOH+2Cd(2+)+L(3-) right arrow over left arrow [SOCd(+)--CdOHL(2-)](-)+2H(+), but not on kaolinite. This difference in behavior results from the presence of =FeOH groups on the illite surface which can form surface complexes with CdLOH(2-), while the =AlOH groups on the kaolinite surface cannot.     

Transfer reaction and molecular weight distribution in the anionic polymerization of formaldehyde

The anhydrous formaldehyde polymerization is examined. The influence of initiator and monomer concentration on the molecular weight and molecular weight distribution are emphasized. A mechanism for the transfer to the monomer is introduced. This mechanism is confirmed by experimental results and leads to the formation of formyl end groups. The influence of various initiators on the transfer reaction also is evaluated.