Chiral organometallic triangles with Rh-Rh bonds. 1. Compounds prepared from racemic cis-Rh2(C6H4PPh2)2(OAc)2

Reaction of racemic cis-Rh(2)(C(6)H(4)PPh(2))(2)(OAc)(2)(HOAc)(2) with excess Me(3)OBF(4) in CH(3)CN results in the formation of racemic cis-[Rh(2)(C(6)H(4)PPh(2))(2)(CH(3)CN)(6)](BF(4))(2).0.5H(2)O (1.0.5H(2)O), an ionic dirhodium complex which has two cisoid nonlabile orthometalated phosphine bridging anions and six labile CH(3)CN ligands in equatorial and axial positions. Reactions of 1 with tetraethylammonium salts of the linear dicarboxylates, oxalate, terephthalate, and 4,4'-biphenyl-dicarboxylate, in organic solvents, produced racemic crystals of the triangular compounds [Rh(2)(C(6)H(4)PPh(2))(2)](3)(C(2)O(4))(3)(py)(6).6MeOH.H(2)O (2.6MeOH.H(2)O), [Rh(2)(C(6)H(4)PPh(2))(2)](3)(O(2)CC(6)H(4)CO(2))(3)(DMF)(6).6.5DMF.0.5H(2)O (3.6.5DMF.0.5H(2)O), and [Rh(2)(C(6)H(4)PPh(2))(2)](3)(O(2)CC(6)H(4)C(6)H(4)CO(2))(3)(py)(6).4.5CH(3)OH.0.75H(2)O (4.4.5CH(3)OH.0.75H(2)O), respectively. All compounds are electrochemically active. The relative chiralities of the dirhodium units in each triangle have been established using a combination of data from X-ray crystallography and (31)P NMR spectroscopy.     

Chiral supramolecules: organometallic molecular loops made from enantiopure R-[cis-Rh2(C6H4PPh2)2(CH3CN)6](BF4)2

Two enantiopure molecular loops, RR-[cis-Rh2(C6H4PPh2)2(py)2O2C(CF2)(n)CO2]2 (1, n = 2 and 2, n = 3) have been made from the reaction in CH2Cl2 and CH3OH of the inherently chiral dirhodium compound, R-[cis-Rh2(C6H4PPh2)2(CH3CN)6](BF4)2, and HO2C(CF2)(n)CO2H in the presence of an excess of pyridine. Single-crystal structure analyses reveal that each of these compounds is composed of two R-cis-Rh2(C6H4PPh2)2(ax-py)2(2+) units, and two equatorial perfluorodicarboxylate linkers, which form a loop oligomer. The 1H, 19F, and 31P[1H] NMR spectra in CDCl3 and C5D5N indicate that only one type of highly symmetric species exists in each solution, which is consistent with the solid-state structures.     

Photochemical reactions of (CO)2 (PPh3)MnC5H4Fe(CO)2C5H5 and (CO)2(PPh3)MnC5H4COFe(CO)2C5H5 with PPh3

Conclusions The photochemical reactions of (CO)₂(PPh₃)MnC₅H₄Fe(CO)₂C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)₂C₅H₅ with PPh₃ gave the products of replacing the CO on the Fe atom by PPh₃: respectively (CO)₂(PPh₃)MnC₅H₄Fe (CO)(PPh₃)C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)(PPh₃)C₅H₅.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2813–2815, December, 1977.     

Reaction of (η5‐C5H5)Fe(CO)2I with Anionic Bidentate Phosphine Ligands PPh2(o‐C6H4NHLi) or PPh2(o‐C6H4OLi)

The o‐substituted hybrid phenylphosphines, PPh₂(o‐C₆H₄NH₂) and PPh₂(o‐C₆H₄OH), could be deprotonated with LDA or n‐BuLi to yield PPh₂(o‐C₆H₄NHLi) and PPh₂(o‐C₆H₄OLi), respectively. When added to a solution of (η⁵‐C₅H₅)Fe(CO)₂I at room temperature, these two lithiated reagents produce a chelated neutral complex 1 (η⁵‐C₅H₅)Fe(CO)[C(O)NH(o‐C₆H₄)PPh₂‐C,P‐η²] for the former and mainly a zwitterionic complex 2 , (η⁵‐C₅H₅)Fe⁺(CO)₂[PPh₂(o‐C₆H₄O^?)] for the latter. Complex 1 could easily be protonated and then decarbonylated to give 4 [(η⁵‐C₅H₅)Fe(CO){NH₂(o‐C₆H₄)PPh₂‐N,P‐η²}⁺]. Complexes 1 and 4‐I have been crystallographically characterized with X‐ray diffraction.     

Syntheses and Characterizations of (4-NH2C6H4S)4Sn and [(4-NH2C6H4S)2(4-NH3C6H4S)2Sn]Cl2

1INTRODUCTIONInrecentyears,theresearchesontinsulfidemateri-alshavedrawnchemists’attentionowningtotheirpo-tentialapplicationsasphotovoltaicmaterials,hologra-phicrecordingsystem[1,,solarcontroldevices[3]and2]semiconductormaterials.Ageneralmethodtopreparetinsulfidesisthechemicalvapourdepositionfromdi-scretesimpletin-sulfidecomplexes,suchas(PhS)4Sn,Sn(SCy)4and[CF3(CF2)5S]4Sn[4].Duringoureffortinsynthesizingtin-sulphurcomplexes[5],weobtainedtwomononucleartincomplexes,(4-NH2C6H4S)4Sn1an…     

Heterobimetallic complexes CpNiCo(CO)2(PPh3)(PhC2C6H4-R -p): their synthesis,electrochemistry and ESR

Three new heterobimetallic acetylene complexes CpNiCo (CO)₃ (PPh₃) (PhC₂C₄H₄-R-p) [R = H (2), Br (3), COCH₂ (4)] have been synthesized in suitable yield (31–47%) via the reaction of (PhC₂C₃H₄-R-p)CO₂(CO)₅ PPh₂ with nickelcene in n-octane. The complex CpNiCo(CO)₃ (Ph₂C₃) (1) has also been obtained in 12% by the reaction of (Ph₂C₂) Co₂ (CO)₄ with nickelcene. The complexes have been characterized by elemental analysis, IR and ¹H NMR. Electrochemical study of redox couples of these complexes was presented by using cyclic voltammetry on Pt electrodes in acetone. At room temperature, all complexes underwent electrochemically reversible or guasi-reversible oneelectron oxidation or reduction to the stable radicals. The radical anions of the complexes could be easily detected by ESR method in situ electrolysis in the THF solution. The isotropic parameters, <a>CO=2.20mT, <g> = 2.052 for the radical anion of complex 1, <a>CO= 2.20 mT, <a>P = 1.42 mT, <g>=2.057 for the radical anion of complex 2, might indicate that NiCoC₂ framework is a delocalized unit and the ligand obitals in the complex have more contribution to the LUMO of the complex.     

Reactions of nitrosoarenes containing electron-withdrawing substituents with coordinated CO. Synthesis and structure of complexes Pd2(OAc)2(p-ClC6H4N[p-ClC6H3NO])2 and Pd2(OAc)2(o-ClC6H4N[o-ClC6H3NO])2

The reaction of tetranuclear Pd₄(μ-COOCH₃)₄(μ-CO)₄ cluster (1a) with p- and o-chloronitrosobenzenes was found to give dinuclear nitrosoamide complexes, Pd₂(OAc)₂(p-ClC₆H₄N[p-ClC₆H₃NO])₂ (4) and Pd₂(OAc)₂(o-ClC₆H₄N[o-ClC₆H₃NO])₂ (5), respectively. The formation of complexes 4 and 5 is accompanied by evolution of CO₂, resulting from oxidation of CO coordinated in cluster 1. Complexes 4 and 5 were characterized by elemental analysis and IR and ¹H NMR spectroscopy; their structures were studied by EXAFS. The reactions of dinuclear complex 4 with molecular hydrogen and CO were studied. The major products of reduction of 4 with hydrogen include metallic palladium, acetic acid, cyclohexanone, and molecular nitrogen. Treatment of complex 4 with CO under mild conditions (1 atm, 20 °C) affords p-chlorophenyl isocyanate.     

A new reaction of [Cp((CO)2Fe(PPh2H)]PF6 with NaBH4 to give Cp(CO)(H)Fe(PPh2H) via Cp(CO)2FeH and PPh2H

[Cp((CO)₂Fe(PPh₂H)]PF₆ reacts with NaBH₄ to give the intermediates CpFe(CO)₂H and PPh₂H, which are then converted into Cp(CO)(H)Fe(PPh₂H). [Cp(CO)₂FeL]PF₆ (L = P(OMe)₃, P(OEt)₃ and P(OⁱPr)₃) reacts with NaBH₄ to give the product Cp(CO)(H)FeL directly without Cp(CO)₂FeH and L even being formed transiently. The proposed reaction mechanism is that H⁻ attacks th phosphorus atom to give a metallaphosphorane complex, followed by coupling between a Cp(CO)₂Fe fragment and H on the hypervalent phosphorus.     

Group IB organometallic chemistry: XXXV. Crystal and molecular structure of [Cu4(4-MeC6H4)-MeC-C(C6H4NMe2-2)2(C6H4NMe2-2)2], a tetranuclear organocopper compound containing bridging alkenyl and aryl groups

The crystal and molecular structure of the title compound has been determined by a single crystal X-ray diffraction study using standard Patterson and Fourier methods. The structure was refined by a block-diagonal least-square procedure to a finalR value of 0.16 for 3454 reflections. Crystals are monoclinic, space groupP2₁/c, witha 14.007(5), b 12.224(5), c 28.358(8)A?, β 99.60(1)°, andZ - 4.The molecule consists of a central rhombus-type core of copper atoms to which the alkenyl and aryl groups are bound in a bridging fashion (two electron-three center bonding). The two alkenyl and the two aryl groups each occupy adjoining edges of the Cu₄ core. The dimethylamino groups of the alkenyl ligand coordinate to copper, whereas those of the bridging aryl ligand are free. As a result the copper core is made up of copper atoms which are alternatingly two- and three-coordinate.The structure is discussed in terms of structural information now available for organocopper compounds. The geometry of the Cu₂C (bridge) moiety in organocopper cluster compounds as expected varies little with the nature of the bridging one-electron organo ligand (alkyl, alkenyl, alkynyl or aryl).     

Syntheses and crystal structures of [(C6H5CH2C5H4)2GdCl.THF]2 and (C6H5CH2C5H4)2ErCl.THF

[(C₆H₅CH₂C₅H₄)₂GdCl.THF]₂ (1) and (C₆H₅CH₂C₅H₄)₂ErCl.THF (2) were prepared by the reaction of LnCl₃ (Ln? Gd, Er) with benzylcyclopentadienyl sodium in THF and characterized by elemental analysis, IR, ¹H NMR, ¹³C NMR, MS and thermal gravimetry. The crystal structures of both compounds were determined. Complex 1 is dimeric and its structure belongs to the monoclinic, P2₁/c space group with a=1.1432(2), b=1.2978(2), c=1.7604(3) nm, β=108.75(2), V=2.4732(9) nm³, Z=2(four monomers), D_c“1.54 g.cm^?3. R=0.0342 and R_w“0.0362. Complex 2 is monomer and its structure belongs to the orthorhombic, P2₁2₁2₁ space group with a=0.8645(2), b=1.1394(3), c=2.5289(4) nm, V=2.4919(9) nm³, Z=4, D_c“1.56 g.cm^?3. R=0.0514, R_w“0.0529. The determination of the crystal structure shows that in complex 1 the benzyl groups on the cyclopentadienyls coordinated to Gd³⁺ are located in the opposite direction (139°); in complex 2 the benzyl groups on the cyclopentadienyls coordinated to Er³⁺ are located in the same direction (6.5°).     

Reaktionen mit phosphororganischen Verbindungen, 10. Mitt.: [Oxydation mit Pb(OAc)4, (C6H5COO)2, C6H5J(OAc)2 und PbO2] Zur Darstellung von α-Ketosäuremethylestern und α-Ketosäurethiophenylestern

Zusammenfassung Ketophosphor-ylene des allgemeinen Typs (C₆H₅)₃P=C(OCH₃)COR lassen sich übersichtlich aus (C₆H₅)₃P=CH–OCH₃ und RCOCl darstellen. Die Reaktion dieser Verbindungen dungen mit den im Titel angeführten Oxydationsmitteln führt zu -Ketosäureestern (RCOCOOCH₃). Überträgt man diese Oxydationsreaktion auf die S-analogen Ketophosphorylene (C₆H₅)₃P=C(SC₆H₅)COR, so erhält man -Ketosäurethiophenylester (RCOCOSC₆H₅), von denen unseres Wissens erst ein Vertreter beschrieben wurde.

---

Ketophosphorylenes of the general type (C₆H₅)₃P=C(OCH₃)COR can easily be prepared from (C₆H₅)₃P=CH–OCH₃ and RCOCl. Reaction of these compounds with the above mentioned oxidizing agents leads to the methyl esters of -ketoacids (RCOCOOCH₃). Application of this method to the S-analogous compounds (C₆H₅)₃P=C(SC₆H₅)COR results in the formation of the thiophenylesters of -ketoacids (RCOCOSC₆H₅), of which-according to our best knowledge-only one compound is known in literature.

---

---

Herrn Prof. Dr.V. Prelog zum 60. Geburtstag in Verehrung gewidmet.     

Highly selective hydrogenation of carbon-carbon multiple bonds catalyzed by the cation [(C(6)Me(6))(2)Ru(2)(PPh(2))H(2)](+): molecular structure of [(C(6)Me(6))(2)Ru(2)(PPh(2))(CHCHPh)H](+), a possible intermediate in the case of phenylacetylene hydrogenation

The dinuclear cation [(C(6)Me(6))(2)Ru(2)(PPh(2))H(2)](+) (1) has been studied as the catalyst for the hydrogenation of carbon-carbon double and triple bonds. In particular, [1][BF(4)] turned out to be a highly selective hydrogenation catalyst for olefin functions in molecules also containing reducible carbonyl functions, such as acrolein, carvone, and methyljasmonate. The hypothesis of molecular catalysis by dinuclear ruthenium complexes is supported by catalyst-poisoning experiments, the absence of an induction period in the kinetics of cyclohexene hydrogenation, and the isolation and single-crystal X-ray structure analysis of the tetrafluoroborate salt of the cation [(C(6)Me(6))(2)Ru(2)(PPh(2))(CHCHPh)H](+) (2), which can be considered as an intermediate in the case of phenylacetylene hydrogenation. On the basis of these findings, a catalytic cycle is proposed which implies that substrate hydrogenation takes place at the intact diruthenium backbone, with the two ruthenium atoms acting cooperatively in the hydrogen-transfer process.     

Group IB organometallic chemistry : XXXVII. Complex forming reactions of polynuclear arylcopper compounds: CalkP bond cleavage in 1,2-bis(diphenylphosphino)ethane (diphos) by (2-Me2NCH2C6H4)4Cu4 and crystal structure of [(C6H5)2PCu · diphos]2 · 2 C6H6

Molecular weight measurements and microwave titrations indicate that no interaction occurs between tetrameric 2-Me₂NCH₂C₆H₄Cu (Ar₄Cu₄) and the monodentate ligands PPh₃, CH₃CN or pyridine. However, the tetrameric structure Ar₄Cu₄ breaks down upon interaction (1/1 molar ratio ArCu/L) with the bidentate ligands (L) Diphos or cis-DPPEE to give the monomeric 1/1 complexes ArCu · L.Addition of Diphos to ArCu · Diphos or conducting the reaction of Ar₄Cu₄ with Diphos in a 1/2 ratio (ArCu/Diphos) gives rise to a C_alkP bond cleavage reaction resulting in the formation of dimeric (Ph₂PCu · Diphos)₂ · 2 C₆H₆, ArH and Ph₂PCHCH₂.The molecular structure of (Ph₂PCu · Diphos)₂ · 2 C₆H₆, has been determined by a single-crystal X-ray diffraction study. Crystals are monoclinic, space group P2₁/c and have Z  2 in a unit cell of dimensions a  12.997(6), b  12.669(7), c  22.839(9) Å and β  94.48(4)°. The structure was refined to R  0.048 for 3048 independent reflections. The four copper atoms in the dimer are held together by two Ph₂P bridges. The bonding in the dimer is discussed.     

Structural aspects of two-stage dimerization in an ionic C60 complex with bis(benzene)chromium: Cr(C6H6)2.C60.C6H4Cl2

Single crystals of the ionic C60 complex with bis(benzene)chromium: {Cr(I)(C6H6)2(.+)}.(C60.-)).C6H4Cl2 (1) were obtained. The crystal structure of 1 shows the presence of monomeric C60.- radical anions at 250 K and the formation of single-bonded (C60-)2 dimers at 90 K. The dimerization is realized in two types of the C60.-) pairs with different interfullerene center-to-center distances of 10.052 and 10.279 A arranged in zigzag chains along the a-direction. As a result, two symmetrically independent (C60-)2 dimers found in 1 at 90 K have different environments, intercage C-C bond lengths and C60- center-to-center distances. Such differences should provide different thermal stability of these dimers and result in the appearance of two stages at the dimerization. Indeed, according to SQUID measurements, the magnetic moment of 1 decreases stepwise at the dimerization in two temperature ranges at 240-200 and 200-160 K.     

Reactions of Dienes with a Mo(0) Complex with Tetraphosphine Coligand [Mo(P4)(Ph2PCH2CH2PPh2)] (P4 = Meso‐o‐C6H4(PPhCH2CH2PPh2)2)

Reaction of tetraphosphine complex [Mo(κ⁴‐P4)(Ph₂PCH₂CH₂PPh₂)] (1; P4 = meso‐o‐C₆H₄‐(PPhCH₂CH₂PPh₂)₂) with E‐1,3‐pentadiene in toluene at 60 °C gave the η⁴‐diene complex [Mo(η⁴‐E‐1,3‐pentadiene)(κ⁴‐P4)] (2), which is present as a mixture of two isomers due to the orientation of the Me group in the diene ligand. Treatment of 1 with Z‐1,3‐pentadien also resulted in the formation of 2 as the sole product after heating the reaction mixture at 90 °C. Whereas the reaction of 1 with 1,3‐cyclohexadiene at 60 °C afforded the η⁴‐diene complex [Mo(η⁴‐cyclohexadiene)(κ⁴‐P4)] (6), that with cyclopentadiene led to the C‐H bond scission product [η⁵‐C₅H₅)MoH(κ³‐P4)] (7). Detailed structures were determined by X‐ray crystallography for 2, 6,and 7, and fluxional feature of 6 in solution was clarified based on the VT‐NMR studies.     

Thiochloroarsenate(III): Darstellung,Schwingungsspektren und Kristallstrukturen von PPh4[As2SCl5] und (PPh4)2[As2SCl6] · C2H4Cl2

Thiochloroarsenates (III): Preparation, Vibrational Spectra, and Crystal Structures of PPh₄[As₂SCl₅] and (PPh₄)₂[As₂SCl₆] · C₂H₄Cl₂ PPh₄[As₂SCl₅] can be obtained from As₂S₃ + PPh₄Cl with HCl in CH₂Cl₂ or 1,2-C₂H₄Cl₂. It reacts with a second mole of PPh₄Cl to yield (PPh₄)₂[As₂SCl₆]. The latter also is formed by the reaction of As₂S₅ + 2 PPh₄Cl with HCl, a second product being (PPh₄)₂[As₂Cl₈]. The i.r. and Raman spectra of the title compounds are reported. Their crystal structures were determined by X-ray diffraction. Crystal data: PPh₄[As₂SCl₅], monoclinic, space group P2₁/n, a = 1175.8, b = 1508.0, c = 1593.4 pm, β = 96.22°, Z = 4; (PPh₄)₂[As₂SCl₆] · C₂H₄Cl₂, triclinic, P1, a = 1166.3, b = 1188.2, c = 2044.6 pm, α = 95.47, β = 97.53, γ = 111.05°, Z = 2. Including the lone electron pairs, the coordination of the As atoms in the [As₂SCl₅]⁻ ion is distorted trigonal-bipyramidal with the S, one Cl atom, and an electron pair in equatorial positions; the two bipyramids around the two As atoms share a common edge. The As atoms in the [As₂SCl₆]²⁻ ion have a distorted octahedral coordination, the two octahedra share a common face; the lone electron pairs are in the trans positions to the S atom.