Colloidal properties of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols

CeO₂-ZrO₂ hydrosols are synthesized and the size, shape, phase composition, density, and electrophoretic mobility of particles are studied. The pH ranges of the stability of hydrosols and the thresholds of their fast coagulation in the presence of some electrolytes are determined. The nature of the aggregation stability of CeO₂-ZrO₂ hydrosols is discussed.     

Physicochemical properties of KOH-H<Subscript>2</Subscript>O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O solutions

Density, viscosity, and surface tension of KOH-H₂O₂-H₂O solutions used to synthesize potassium superoxide in sprayer apparatus were studied with various relative amounts of the components in the temperature range 0–30°C. Analytical dependences of the above-mentioned quantities on temperature and solvent (water) content of the system were found.     

CeO<Subscript>2</Subscript>-catalyzed ozonation of phenol

Three different cerium citrate-based precursors were used for synthesizing CeO₂ through thermal treatment. Three morphological types of CeO₂ were obtained. Characterization of these oxides was carried out by XRD patterns, SEM microscopy, N₂ adsorption isotherms, Raman spectroscopy, zeta potential, and UV/Vis luminescence. Ozonation of phenol catalyzed by CeO₂ was studied as a representative reaction of environmental interest. The differences on the catalytic activity showed by these three oxides could be correlated to amounts of Ce³⁺ on CeO₂ surface and, consequently, to the demand for oxygen needed to burn each precursor.     

Solid electrolytes based on CeO<Subscript>2</Subscript> for medium-temperature electrochemical devices

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices: electrolytic cells, oxygen sensors, and solid oxide fuel cells. In this work, studies are presented of the effect of the dopant cation radius and its concentration on the physico-chemical properties of the Ce_{1 − x} Ln _x O_{2 − δ} solid solutions (x = 0–0.20; Ln = La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb) and also of multicomponent solid solutions of Ce_{1 − x} Ln _x/2Ln′ _x/2O_{2 − δ} (x = 0–0.20; Ln = Sm, La, Gd and Ln′ = Dy, Nd, Y) and Ce_{1 − x − y} Sm _x M _y O_{2 − δ} (M = Ca, Sr, Ba) obtained using the solid-phase synthesis technique. Electric properties of the samples were studied in the temperature range of 623–1173 K and in the oxygen partial pressure range of 0.01–10⁻²² MPa. The values of oxygen critical pressure ( p_O2 ^* )\left( {p_{O_2 }^* } \right) are presented, at which the ionic and electron conductivity values are equal. The values were calculated on the basis of experimental dependences at 1023 K at the assumption that the ionic conductivity value is determined only by the dopant concentration and its effective ionic radius and is independent of the oxygen partial pressure.     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

Effect of the microstructure of the supported catalysts CuO/TiO<Subscript>2</Subscript> and CuO/(CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>) on their catalytic properties in carbon monoxide oxidation

The effect of the microstructure of titanium dioxide on the structure, thermal stability, and catalytic properties of supported CuO/TiO₂ and CuO/(CeO₂-TiO₂) catalysts in CO oxidation was studied. The formation of a nanocrystalline structure was found in the CuO/TiO₂ catalysts calcined at 500°C. This nanocrystalline structure consisted of aggregated fine anatase particles about 10 nm in size and interblock boundaries between them, in which Cu²⁺ ions were stabilized. Heat treatment of this catalyst at 700°C led to a change in its microstructure with the formation of fine CuO particles 2.5–3 nm in size, which were strongly bound to the surface of TiO₂ (anatase) with a regular well-ordered crystal structure. In the CuO/(CeO₂-TiO₂) catalysts, the nanocrystalline structure of anatase was thermally more stable than in the CuO/TiO₂ catalyst, and it persisted up to 700°C. The study of the catalytic properties of the resulting catalysts showed that the CuO/(CeO₂-TiO₂) catalysts with the nanocrystalline structure of anatase were characterized by the high-est activity in CO oxidation to CO₂.     

Effect of CeO<Subscript>2</Subscript> and Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> on the phase transformation and optical properties of photostable titanium dioxide

In the present work, the effect of individual additives calculated as molar fractions of Sb₂O₃ and CeO₂ (x _{Sb 2}O₃ range: 0.03–0.08 %, x _{CeO 2} range: 0.05–0.14 %), on the phase composition, phase transformation, and optical properties of photostable rutile titanium dioxide was studied using selective leaching method, ICP-AES technique, XRD method, spectrophotometric analysis and S _BET measurements. The starting material was hydrated titanium dioxide. It was observed that the addition of Sb₂O₃ to TiO₂ did not influence the anatase-rutile phase transformation, but increasing the CeO₂ addition caused a decrease in the rutilization degree. Thus, CeO₂ acted as an inhibitor of the TiO₂ phase transformation. Sb₂O₃ addition to TiO₂ presumably caused the formation of a co-phase of Sb with Ti. Cerium formed a separate phase, CeO₂, and reacted partly with titanium, probably creating co-phase, Ce_0.8Ti_0.2O₂. Comparing the colour of modified rutile titanium dioxide according to the type of the additive introduced, it was found that TiO₂ with CeO₂ had higher brightness but lower white tone values when compared with TiO₂ modified with Sb₂O₃. The relative lightening power and grey tone of the modified TiO₂ were higher in TiO₂ modified with Sb₂O₃. The values of the photocatalytic activity measured in all TiO₂ samples modified either with Sb₂O₃ or CeO₂ were very similar and varied around the value of 21.     

Performance and characterisation of CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> catalysts for selective catalytic reduction of NO with NH<Subscript>3</Subscript>

Ce-Ti-W-O _x catalysts were prepared and applied to the NH₃-selective catalytic reduction (SCR) reaction. The experimental results showed that the Ce-Ti-W-O _x catalyst prepared by the hydrothermal method exhibited higher NO conversion than those synthesised via the sol-gel and impregnating methods, while the optimal content of WO₃ and molar ratio of Ce/Ti were 20 mass % and 4: 6, respectively. Under these conditions, the catalyst exhibited the highest level of catalytic activity (the NO conversion reached values higher than 90 %) across a wide temperature range of 225–450°C, with a range of gas hourly space velocity (GHSV) of 40000–140000 h^?1. The catalyst also exhibited good resistance to H₂O and SO₂. The influences of morphology, phase structure, and surface properties on the catalytic performance were investigated by N₂ adsorption-desorption measurement, XRD, XPS, H₂-TPR, and SEM. It was found that the high efficiency of NO removal was due to the large BET surface area, the amorphous surface species, the change to element valence states, and the strong interaction between Ce, Ti, and W.     

Synthesis of highly ordered mesoporous CeO<Subscript>2</Subscript> and low temperature CO oxidation over Pd/mesoporous CeO<Subscript>2</Subscript>

Highly ordered mesoporous cerium dioxide (meso-CeO₂) was successfully synthesized using a facile solvent-free infiltration method from a mesoporous silica template, KIT-6. The meso-CeO₂ material, thus obtained, exhibited well-defined mesostructure and high surface area (153 m² g⁻¹). The physicochemical properties of meso-CeO₂ material and Pd-supported on meso-CeO₂ (Pd/meso-CeO₂) were characterized by electron microscopy, X-ray diffraction, N₂ adsorption–desorption, and temperature-programmed experiments. The Pd/meso-CeO₂ catalyst exhibited excellent catalytic activity for CO oxidation compared with those of other Pd/CeO₂ catalysts which were prepared using nanocrystalline CeO₂ and bulk-CeO₂ as the supports. Moreover, a hydrogen pretreatment of the Pd/meso-CeO₂ catalyst resulted in a remarkable increase of catalytic activity (T ₁₀₀ = 52 °C).     

Thermal synthesis of the CeO<Subscript>2</Subscript>-PrO<Subscript>2</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>pigments

Summary The synthesis of new compounds based on the CeO₂-PrO₂-Nd₂O₃system, which can be used as pigments for colouring of ceramic glazes, is investigated in our laboratory. The optimum conditions for the syntheses of these compounds have been estimated. The methods of thermal analysis provided first information about the temperature region of the formation of the pigments investigated. The synthesis of these compounds was followed by thermal analysis using STA 449/C Jupiter (Netzsch, Germany).     

Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.     

Synthesis of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols via peptization at room temperature

A procedure is developed for the synthesis of concentrated CeO₂-ZrO₂ hydrosols based on the peptization of a precipitate obtained by the hydrolysis of a cerium nitrate-zirconium oxynitrate mixture. The time intervals and optimum [H⁺]/[Me ⁿ⁺] molar ratios giving rise the formation of CeO₂-ZrO₂ hydrosols stable to aggregation with a narrow particle size distribution are established. The size, shape, density, and phase composition of the hydrosol particles are determined.     

Synthesis of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols via peptization at elevated temperature

A method for synthesizing aggregation-stable CeO₂-ZrO₂ hydrosols with different particle compositions is developed based on the peptization of hydrated oxide precipitates at elevated temperature. It is shown that, by varying heat treatment time, sols can be obtained with particles that have different degrees of crystallinity and sizes of no larger than 6 nm.     

Porous CeO<Subscript>2</Subscript> nanorod-catalyzed synthesis of poly-substituted imino-pyrrolidine-thiones

Porous CeO₂ nanorod has been used as efficient and recyclable heterogeneous catalyst for the synthesis of highly functionalized imino-pyrrolidine-thiones via the reaction of aromatic aldehyde (especially one bearing an electron-donating group), malononitrile, isocyanide and unactivated weakly acidic heterocyclic thiophenol. The high catalytic efficiency of porous CeO₂ nanorod in this reaction was discussed preliminarily based on their morphology and structure.     

Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

Physicochemical properties and mixed electronic and ionic conduction of composite ceramics in the system ZrO<Subscript>2</Subscript>-Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

Composites ZrO₂-(Bi₂CuO₄+ 20 wt % Bi₂O₃) (50–80 vol % ZrO₂) are synthesized and their physicochemical properties are studied. It is demonstrated that the composites comprise triple-phase mixtures of ZrO₂ of a monoclinic modification, Bi₂CuO₄, and solid solution Bi_2?x Zr _x O_{3 + x/2} and retain their mechanical strength up to 800°C. Impedance spectroscopy is used to examine their electroconductivity at 700–800°C in the interval of partial oxygen pressures extending from 37 to 2.1 × 10⁴ Pa. Contributions made by electronic and ionic constituents to their overall conductivity are evaluated. The best specimens’ conductivity is ～0.01 S cm^?1, with the electronic and ionic transport numbers nearly equal. The composite consisting of 50 vol % ZrO₂ and 50 vol % (Bi₂CuO₄ + 20 wt % Bi₂CuO₄) is tested in the role of an oxygen-separating membrane. The selective flux of oxygen in the temperature interval 750–800°C amounts to (2.2–6.3) × 10^?8 mol cm^?2 s^?1, testifying that these materials may be used as gas-separating membranes.     

Dispersion state and catalytic properties of vanadia species on the surface of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H₂ temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V₂O₅ on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V₂O₅ is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VO_x species bridging to the surface through V-O-Ti bonds. With the increase of V₂O₅ loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ratio of polymerized to isolated vanadia species and the decrease of the reactivity of the associated surface oxygen anions and, consequently, although the activity increases with loading to reach a maximum value, the turn over number (TON) of the V₂O₅/TiO₂ catalyst decreases linearly. When the loading amount of V₂O₅ is higher than its dispersion capacity, the turn over number decreases more rapidly with the increase of V₂O₅ loading due to the formation of V₂O₅ crystallites in which the oxygen anions associated with V-O-V bonds are less reactive and only partially exposed on the surface.