Discovering metabolites of post-harvest fungicides in citrus with liquid chromatography/time-of-flight mass spectrometry and ion trap tandem mass spectrometry

In this study, we benefit from the combination of liquid chromatography (LC)/time-of-flight (TOF) MS accurate mass measurements to generate elemental compositions of ions and LC/ion trap multiple MS (MSn) providing complementary structural information, which is useful for the elucidation of unknown organic compounds at trace levels in complex food extracts. We have applied this approach to investigate different citrus fruits extracts, and we have identified two post-harvest fungicides (imazalil and prochloraz), the main degradation product of imazalil ([M + H]+, m/z 257) and a non-previously reported prochloraz degradation product ([M + H]+, m/z 282). The database-mediated identification of the parent compounds was based on the generated elemental composition obtained from accurate mass measurements and additional qualitative information from the high resolution chlorine isotopic clusters of both the protonated molecules (imazalil, [M + H]+ 297.0556, <0.1 ppm error, 2-Cl; prochloraz, [M + H]+ 376.0381, 1.9 ppm error, 3-Cl) and their characteristic fragments ions (imazalil: m/z 255 and 159; prochloraz: m/z 308 and 266). The correlation between the structural information provided by ion trap MS/MS fragmentation pathways of the parent species and the TOF accurate mass elemental composition data of the degradation products were the key to elucidate the structures of the degradation products of both post-harvest fungicides. Finally, where standards were not available (prochloraz), further confirmation was obtained by synthesizing the proposed degradation product by acid hydrolysis of the parent standard and confirmation by LC/TOF-MS.     

Duty cycle enhancement of an orthogonal acceleration TOF mass spectrometer using an axially-resonant excitation linear ion trap

We report a new technique to enhance detection duty cycle of an orthogonal-acceleration time-of-flight mass spectrometer (oaTOF) over a broad mass range. To this end, we used an axially-resonant-excitation linear ion trap, which ejects ions axially and mass selectively into a non-mass-selective linear ion trap in front of the TOF pusher. A delay between the ejection timing of the non-mass-selective LIT and the push timing of the oaTOF was swept mass-synchronously with the axially-resonant-excitation linear ion trap, so that ions are detected with duty cycle larger than 60% over a wide mass range from m/z 174.1 to 1922.0, which is 3 to 10 times better than conventional oaTOF.     

A novel ion trap that enables high duty cycle and wide m/z range on an orthogonal injection TOF mass spectrometer

Although TOF analyzers with orthogonal ion injection provide the whole spectrum without scanning, their duty cycle is low compared with scanning analyzers in single ion monitoring mode. Typical duty cycle is in the range of 5% to 30% depending on the instrument geometry and ion m/z value. We present here a novel trapping/releasing setup, which offers the duty cycle near 100% over a wide range. Operation in the mass range from m/z 120 to almost 2000 is demonstrated. Ions are trapped in a short linear ion trap at the end of the collision cell in an axial pseudopotential well created by additional rf (“AC”) voltage applied to all four rods of the trap with the same amplitude and phase. The pseudopotential created by AC field is mass dependent, and by ramping down the AC voltage, ions can be released from the trap sequentially from high m/z to low, while all ions are gaining the same kinetic energy. Upon entering the TOF accelerator, ions with lower m/z catch up with heavier ions, and the AC ramp parameters can be selected to make all ions meet in the center of the TOF extraction region, resulting in sensitivity gains from 3 to 14 without loss of mass accuracy or resolution.     

Orthogonal trap time-of-flight mass spectrometer using a collisional damping chamber

We report a new hybrid mass spectrometer, which is a combination of a quadrupole ion trap and an orthogonal time-of-flight (TOF) mass spectrometer. This new configuration consists of a collisional-damping chamber (CDC) inserted between an MSn-capable ion trap and a high-mass-accuracy orthogonal-TOF mass spectrometer. Because the CDC converted an ion packet into an energy-focused and quasi-continuous beam, a high mass resolution of over 10,000 and a high mass accuracy of better than 3 ppm were achieved. Moreover, the ratio of the maximum detectable m/z to the minimum detectable m/z, which is referred to here as the mass window, was improved to more than 10.     

A novel approach for identification and characterization of glycoproteins using a hybrid linear ion trap/FT-ICR mass spectrometer

Combining source collision-induced dissociation (CID) and tandem mass spectral acquisition in a pseudo-MS(3) experiment using a linear ion trap results in a highly selective and sensitive approach to identifying glycopeptide elution from a protein digest. The increased sensitivity is partially attributed to the nonselective nature of source CID, which allows simultaneous activation of all charge states and coeluting glycoforms generating greater ion abundance for the mass-to-charge (m/z) 204 and/or 366 oxonium ions. Unlike source CID alone, a pseudo-MS(3) approach adds selectivity while improving sensitivity by eliminating chemical noise during the tandem mass spectral acquisition of the oxonium ions in the linear ion trap. Performing the experiments in the hybrid linear ion trap/Fourier transform-ion cyclotron resonance (FT-ICR) enables subsequent high-resolution/high-mass accuracy full-scan mass spectra (MS) and parallel acquisition of MS/MS in the linear ion trap to be completed in 2 s directly following the pseudo-MS(3) scan to collate identification and characterization of glycopeptides in one experimental scan cycle. Analysis of bovine fetuin digest using the combined pseudo-MS(3), high-resolution MS, and data-dependent MS/MS events resulted in identification of four N-linked and two O-linked glycopeptides without enzymatic cleavage of the sugar moiety or release of the sialic acids before analysis. In addition, over 95% of the total protein sequence was identified in one analytical run.     

An ion trap-ion mobility-time of flight mass spectrometer with three ion sources for ion/ion reactions

This instrument combines the capabilities of ion/ion reactions with ion mobility (IM) and time-of-flight (TOF) measurements for conformation studies and top-down analysis of large biomolecules. Ubiquitin ions from either of two electrospray ionization (ESI) sources are stored in a three dimensional (3D) ion trap (IT) and reacted with negative ions from atmospheric sampling glow discharge ionization (ASGDI). The proton transfer reaction products are then separated by IM and analyzed via a TOF mass analyzer. In this way, ubiquitin +7 ions are converted to lower charge states down to +1; the ions in lower charge states tend to be in compact conformations with cross sections down to ～880 Ų. The duration and magnitude of the ion ejection pulse on the IT exit and the entrance voltage on the IM drift tube can affect the measured distribution of conformers for ubiquitin +7 and +6. Alternatively, protein ions are fragmented by collision-induced dissociation (CID) in the IT, followed by ion/ion reactions to reduce the charge states of the CID product ions, thus simplifying assignment of charge states and fragments using the mobility-resolved tandem mass spectrum. Instrument characteristics and the use of a new ion trap controller and software modifications to control the entire instrument are described.     

Optimization of a quadrupole ion storage trap as a source for time‐of‐flight mass spectrometry

Designs of a quadrupole ion trap (QIT) as a source for time‐of‐flight (TOF) mass spectrometry are evaluated for mass resolution, ion trapping, and laser activation of trapped ions. Comparisons are made with the standard hyperbolic electrode ion trap geometry for TOF mass analysis in both linear and reflectron modes. A parallel‐plate design for the QIT is found to give significantly improved TOF mass spectrometer performance. Effects of ion temperature, trapped ion cloud size, mass, and extraction field on mass resolution are investigated in detail by simulation of the TOF peak profiles. Mass resolution (m/Δm) values of several thousand are predicted even at room temperature with moderate extraction fields for the optimized design. The optimized design also allows larger radial ion collection size compared with the hyperbolic ion trap, without compromising the mass resolution. The proposed design of the QIT also improves the ion–laser interaction volume and photon collection efficiency for fluorescence measurements on trapped ions. Copyright © 2011 John Wiley & Sons, Ltd.     

MS3 using the collision cell of a tandem mass spectrometer system

We report the feasibility of multistage fragmentation in combination with a fast background subtraction method, yielding the equivalent of MS3. The first quadrupole selects an ion of interest, and the ion is axially accelerated into Q2 to generate fragment ions. Subsequent stages of mass selection and fragmentation are obtained by quadrupolar resonant excitation within the Q2 collision cell. The fragments are analyzed downstream by either a resolving quadrupole or a time-of-flight (TOF) mass spectrometer, and multistage spectra are obtained by subtraction (MS(n) - MS(n-1)) for n = 3 or 4. We discuss the characterization of this method, including product ion arrival times, fragmentation efficiencies, and ion selectivity. We report accurate TOF mass spectra of background-subtracted MS3 for protonated molecules reserpine (m/z 609), bosentan (m/z 1552), and taxol (m/z 854).     

Enhancement of matrix-assisted laser desorption/ionization photodissociation tandem time-of-flight mass spectra; spectral reduction and cleanup of isotopomeric contamination

Weak signal intensity and poor precursor ion selection are the major difficulties in tandem time-of-flight (TOF) mass spectrometry of ions generated by matrix-assisted laser desorption/ionization (MALDI). Even though the latter can be overcome in photodissociation (PD) tandem TOF mass spectrometry via ion pulse-PD laser pulse synchronization, clean monoisotopic selection of precursor ions of high m/z can often be difficult for various reasons. A considerable enhancement of post-source decay (PSD) and PD tandem mass spectra has been achieved in this work via single-ion detection and post-acquisition reduction of the spectra. Also, an algorithm has been developed to clean up isotopomeric contamination when the resolution for precursor ion selection is less than adequate. A high-quality tandem TOF mass spectrum which results from PD of virtually monoisotopic precursor ions has been obtained.     

Quadrupole time-of-flight versus triple-quadrupole mass spectrometry for the determination of phosphopeptides by precursor ion scanning

An API 3000 triple-quadrupole instrument and a QSTAR Pulsar quadrupole time-of-flight (TOF) mass spectrometer were compared for the determination of phosphopeptides by precursor ion scanning in both the positive and negative nanoelectrospray ionization modes. The limits of detection for synthetic phosphopeptides were similar (500 amol microl(-1)) for both types of instruments when monitoring precursors of -79 Da (PO(3)(-)). However, the quadrupole TOF system was approximately fivefold more sensitive (1 fmol microl(-1)) than the triple-quadrupole instrument (5 fmol microl(-1)) when monitoring precursors of 216 Da (immonium ion of phosphotyrosine). The recently introduced Q(2)-pulsing function, which enhances the transmission of fragment ions of a selected m/z window from the collision cell into the TOF part, improved the sensitivity of precursor ion scans on a quadrupole TOF instrument. The selectivity of precursor ion scans is much better on quadrupole TOF systems than on triple quadrupoles because the high resolving power of the reflectron-TOF mass analyzer permits high-accuracy fragment ion selection at no expense of sensitivity. This minimizes interferences from other peptide fragment ions (a-, b-, and y- type) of the same nominal mass but with sufficient differences in their exact masses. As a result, the characteristic immonium ion of phosphotyrosine at m/z 216.043 can be utilized for the selective detection of tyrosine phosphorylated peptides. Our data suggest that, in addition to their superior performance for peptide sequencing, quadrupole TOF instruments also offer a very viable alternative to triple quadrupoles for precursor ion scanning, thus combining high sensitivity and selectivity for both MS and MS/MS experiments in one instrument.     

On-line capillary liquid chromatography tandem mass spectrometry on an ion trap/ reflectron time-of-flight mass spectrometer using the sequence tag database search approach for peptide sequencing and protein identification

Capillary high-performance liquid chromatography has been coupled on-line with an ion trap storage/reflectron time-of-flight mass spectrometer to perform tandem mass spectrometry for tryptic peptides. Selection and fragmentation of the precursor ions were performed in a three-dimensional ion trap, and the resulting fragment ions were pulsed out of the trap into a reflectron time-of-flight mass spectrometer for mass analysis. The stored waveform inverse Fourier transform waveform was applied to perform ion selection and an improved tickle voltage optimization scheme was used to generate collision-induced dissociation. Tandem mass spectra of various doubly charged tryptic peptides were investigated where a conspicuous y ion series over a certain mass range defined a partial amino acid sequence. The partial sequence was used to determine the identity of the peptide or even the protein by database search using the sequence tag approach. Several peptides from tryptic digests of horse heart myoglobin and bovine cytochrome c were selected for tandem mass spectrometry (MS/MS) where it was demonstrated that the proteins could be identified based on sequence tags derived from MS/MS spectra. This approach was also utilized to identify protein spots from a two-dimensional gel separation of a human esophageal adenocarcinoma cell line.     

衍生化-离子阱气相色谱质谱联用检测乳粉中三聚氰胺时不同质谱检测方法研究

利用N,O-双三甲基硅基三氟乙酰胺(BSTFA)和三甲基氯硅烷(TMCS)衍生化试剂对乳粉中三聚氰胺进行衍生化处理,利用离子阱气相色谱质谱联用仪,建立了全扫描、选择离子监测、二级质谱3种测定三聚氰胺的质谱方法.选择离子监测以三聚氰胺衍生物的特征离子m/z342,327,171,99为定性离子,以m/z327为定量离子;全扫描法二级质谱特征峰为定性依据,以特征离子m/z327为定量离子;二级质谱法以衍生物二级质谱m/z285,171,213为定性离子,以m/z 285为定量离子.3种方法的线性范围为0.05～2.0 mg/L,线性相关系数分别为0.9986、0.9990、0.9988;检测限分别为0.005、0.002、0.003 mg/kg,RSD分别为6.3%、5.7%、6.1%(n=6),方法的回收率为84%～105%.3种不同质谱检测方法应用到乳粉的检测中效果良好,均能够满足乳粉中三聚氰胺的检测要求.     

Application of self-ionization for enhancing stereochemical and positional effects from arylglycosides under electron ionization conditions in an ion trap mass spectrometer

Ion trap mass spectrometry has been used to structurally characterize and differentiate positional and stereo isomers of arylglycosides having potential antioxidant properties. The use of the self-ionization (SI) technique has allowed to evidence a strong reactivity of fragment ions produced from dissociations of the molecular ion towards the molecules introduced into the trap. Specific structural effects due to positional isomers and anomers have been also envisaged through the occurrence of bimolecular processes inside the ion trap analyzer. Under self-ionization conditions, even-electron ions are produced. The charge is retained on the sugar moiety, in agreement with its proton affinity higher than that of the substituted phenol moiety. Most of the fragmentation pathways involve elimination of acetic acid that protects the hydroxylic groups of the glycoside. SI also produces adduct ions, likely as covalent species, having higher m/z values than the molecular ion. The reaction site is mainly the double bond present in the pyranosidic ring. Even if some fragment ions have lost the initial stereochemistry, their formation can be related to the structure of the parent neutrals introduced into the cell. Collision-induced dissociation (CID) experiments, carried out on ions formed by ion-molecule reactions, have allowed to obtain further information on gas phase ion structures. The study of mass-selected ion-molecule reactions and their kinetics have evidenced a spectacularly different reactivity of the ion at m/z 111 towards the two anomers 2alpha and 2beta, with the latter showing a much more pronounced reactivity. The approach developed in this work revealed to be an useful tool in structural characterization, as well as in stereo and regiochemical differentiation of arylglycosides.     

Determination of the elemental composition of trace analytes in complex matrices using exact masses of product ions and corresponding neutral losses

The emergence of time-of-flight (TOF) and hybrid quadrupole/time-of-flight (Q-TOF) mass spectrometers has offered new possibilities for determining the elemental composition of analytes present at trace levels. The mass accuracy provided by these instruments is currently in the range of 2-5 m m/z units, permitting the determination of the elemental composition of small molecules. The orthogonal information of relative isotopic abundances (RIAs) is used to reduce the number of elemental compositions that are possible, based on consideration of exact masses. Elimination of additional possible compositions has been reported when the analyte is fragmented and its resulting product ions and corresponding neutral losses are carefully analyzed. Published algorithms reduce the number of proposed precursor ions by deleting each precursor candidate which cannot be explained by summing any combination of postulated product ion and corresponding neutral loss elemental composition candidates. An extension of such algorithms is described in this paper. This approach compares not only the precursor ion with the different fragments, but tests the possible descent of any ion from all other recorded ions. This extended algorithm has been tested by processing published data. Algorithms analyzing product ion spectra can be used for real-life data. However, there is a risk that an ion which originates from the mobile phase or from a co-eluting matrix compound can be mathematically correlated to the investigated precursor ion. Such an incorrect correlation can lead to the deletion of a correct elemental composition. This is an important issue if TOF rather than Q-TOF instruments are used. Therefore, ultra-performance liquid chromatography (UPLC) and a peak deconvolution algorithm were used to generate and process TOF chromatograms in order to minimize the number of ions which are not related to the analyte precursor ion. The combined use of chromatographic deconvolution and product ion spectra has been tested and is critically discussed.     

A new technique for unbiased external ion accumulation in a quadrupole two-dimensional ion trap for electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry.

External ion accumulation in a two-dimensional (2D) multipole trap has been shown to increase the sensitivity, dynamic range and duty cycle of a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. However, it is important that trapped ions be detected without significant bias at longer accumulation times in the external 2D multipole trap. With increasing ion accumulation time pronounced m/z discrimination was observed when trapping ions in an accumulation quadrupole. In this work we show that superimposing lower rf-amplitude dipolar excitation over the main rf-field in the accumulation quadrupole results in disruption of the m/z discrimination and can potentially be used to achieve unbiased external ion accumulation with FTICR.     

Improved mass accuracy for higher mass peptides by using SWIFT excitation for MALDI-FTICR mass spectrometry

Stepwise-external calibration has previously been shown to produce sub part-per-million (ppm) mass accuracy for the MALDI-FTICR/MS analyses of peptides up to m/z 2500. The present work extends these results to ions up to m/z 4000. Mass measurement errors for ions of higher mass-to-charge are larger than for ions below m/z 2500 when using conventional chirp excitation to detect ions. Mass accuracy obtained by using stored waveform inverse Fourier transform (SWIFT) excitation was evaluated and compared with chirp excitation. Analysis of measurement errors reveals that SWIFT excitation provides smaller deviations from the calibration equation and better mass accuracy than chirp excitation for a wide mass range and for widely varying ion populations.     

Interpretation of electrospray/ion trap mass spectra of bile acids and other surfactants

Electrospray spectra of various bile acids and other surfactants were obtained using an ion trap instrument. Bile acids and bile acid derivatives such as 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) self associate to form micelles in a stepwise process. Their spectra show a distinct pattern of aggregation, with ions evenly separated in the m/z space. A new parameter, n/z, can be used to characterize such ions, where n is the number of molecules and z is the charge of the aggregate. The values of z were determined using multi-stage mass spectrometry (MS(n)) and high resolution in the ion trap.     

Radial stratification of ions as a function of mass to charge ratio in collisional cooling radio frequency multipoles used as ion guides or ion traps

Collisional cooling in radio frequency (RF) ion guides has been used in mass spectrometry as an intermediate step during the transport of ions from high pressure regions of an ion source into high vacuum regions of a mass analyzer. Such collisional cooling devices are also increasingly used as 'linear', two-dimensional (2D) ion traps for ion storage and accumulation to achieve improved sensitivity and dynamic range. We have used the effective potential approach to study m/z dependent distribution of ions in the devices. Relationships obtained for the ideal 2D multipole demonstrate that after cooling the ion cloud forms concentric cylindrical layers, each of them composed of ions having the same m/z ratio; the higher the m/z, the larger is the radial position occupied by the ions. This behavior results from the fact that the effective RF focusing is stronger for ions of lower m/z, pushing these ions closer to the axis. Radial boundaries of the layers are more distinct for multiply charged ions, compared to singly charged ions having the same m/z and charge density. In the case of sufficiently high ion density and low ion kinetic energy, we show that each m/z layer is separated from its nearest neighbor by a radial gap of low ion density. The radial gaps of low ion population between the layers are formed due to the space charge repulsion. Conditions for establishing the m/z stratified structure include sufficiently high charge density and adequate collisional relaxation. These conditions are likely to occur in collisional RF multipoles operated as ion guides or 2D ion traps for external ion accumulation. When linear ion density increases, the maximum ion cloud radius also increases, and outer layers of high m/z ions approach the multipole rods and may be ejected. This 'overfilling' of the multipole capacity results in a strong discrimination against high m/z ions. A relationship is reported for the maximum linear ion density of a multipole that is not overfilled.     

A segmented ring,cylindrical ion trap source for time-of-flight mass spectrometry

An ion trap source has been designed for use with time-of-flight (TOF) mass analysis. Two thin diaphragms make up a segmented ring electrode; the end cap electrodes are planar wire mesh. The potential field produced by the rf voltage applied between the ring and end cap electrodes resembles that of the cylindrical ion trap. The trapped ion population for ions created by electron impact exhibits linear growth against a first-order loss that has a time constant of about 50 µs; no ion loss occurs when the electron beam is off. The observed value of q _z at low-mass cutoff for rf ion storage is ?0.84. Pulsed extraction of all ions is accomplished by switching the trap electrodes from rf to voltages required to provide a linear dc extraction field. The TOF flight path includes a wide energy range reflectron. Better than unit mass resolution is achieved through m/z 500 without collisional ion cooling. With an extraction rate of 1 kHz and a recording rate of 4 spectra per second, a linear working curve is obtained between 36 pg and 18 ng of chlorobenzene delivered chromatographically. The system has demonstrated the potential to achieve a very high sample utilization efficiency at high spectral generation rates.