Palladium nanoparticles stabilized by an ionic polymer and ionic liquid: a versatile system for C-C cross-coupling reactions

Highly stable palladium nanoparticles (Pd NPs), protected by an imidazolium-based ionic polymer (IP) in a functionalized ionic liquid (IL), have been prepared and characterized by transmission electron microscopy (TEM). These Pd NPs are excellent precatalysts for Suzuki, Heck, and Stille coupling reactions and can be stored without undergoing degradation for at least 2 years. The NP-IP-IL system may therefore be considered as an alternative to the traditional palladium on carbon (Pd/C) precatalyst employed in many C-C coupling reactions, also allowing reactions to be conducted under "solvent-free" conditions.     

Palladium nanoparticles supported onto ionic carbon nanotubes as robust recyclable catalysts in an ionic liquid

Palladium nanoparticles have been deposited onto imidazolium bromide-functionalized ionic MWCNTs through hydrogen reduction of Na2PdCl4 in water without aid of surfactants under extremely mild conditions, and combined with an ionic liquid to create a new recyclable ionic liquid-based catalytic system allowing up to 50 times recycling.     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Amphiphilic ionic liquid stabilizing palladium nanoparticles for highly efficient catalytic hydrogenation

The highly water-soluble palladium nanoparticles (NPs) were synthesized by using the amphiphilic poly(ethylene glycol)-functionalized dicationic imidazolium-based ionic liquid (C(12)Im-PEG IL) as a stabilizing agent. The aqueous dispersed palladium NPs in the range of 1.9 ± 0.3 nm were observed by transmission electron microscopy (TEM). The physicochemical properties of C(12)Im-PEG IL in aqueous phase have been characterized by electrical conductivity, surface tension and dynamic light scattering (DLS) measurements. It was demonstrated that the amphiphilic ionic liquid can form micelles above its critical micelle concentration (CMC) in aqueous solution and the micelles played a crucial role in stabilizing the palladium NPs and thus promoted catalytic hydrogenation. Furthermore, the dicationic ionic liquid can also act as a gemini surfactant and generated emulsion between hydrophobic substrates and the catalytic aqueous phase during the reaction. The aqueous dispersed palladium NPs showed efficient activity for the catalytic hydrogenation of various substrates under very mild conditions and the stabilizing Pd(0) nanoparticles (NPs) can be reused at least eight times with complete conservation of activity.     

Asymmetric direct aldol reaction catalyzed by an L-prolinamide derivative: considerable improvement of the catalytic efficiency in the ionic liquid

The asymmetric direct aldol reactions of a wide scope of aldehydes with unmodified ketones in the presence of 20 mol%(S,S,S)-pyrrolidine-2-carboxylic acid (2'-hydroxyl-1',2'-diphenyl-ethyl)-amine (1) were performed in ionic liquids; aldol products with 91 to >99% ees for aromatic aldehydes and 99% ees for alphatic aldehydes were offered by the present procedure.     

Benzimidazolyl based Schiff base palladium complex in an ionic liquid: an effective combination for Suzuki coupling

A new benzimidazole based Pd(II) Schiff base complex was prepared and its catalytic activity was evaluated for Suzuki cross-coupling reactions in ethyl-methyl imidazolium hexafluorophosphate [EMIM PF₆] ionic liquid at ambient temperature. The system provides a stable and reusable method for coupling reactions. Optimization for suitable reaction conditions were studied with respect to the effect of catalyst concentration, effects of additives, solvent and substituents on boronic acid. Good to excellent yields were achieved using a modest amount of the catalyst. The reaction time was less and the yield was more compared to previously reported results. In addition, the catalyst can be easily reused and recycled for six times without much loss in activity; this is an example of sustainable and green methodology.     

Palladium catalyzed C-P cross-coupling reactions in ionic liquids

C-P cross-coupling reactions between phosphine-borane complexes and aryl iodides are successfully performed in imidazolium based ionic liquids (ILs). To improve the recycling of the catalyst, a monophosphine covalently attached to a pyridinium salt was prepared. Associated to palladium, this catalyst shows a high catalytic activity and stays immobilized in the IL. It was reused at least in six cycles.     

Reusable Pd nanoparticles immobilized on functional ionic liquid co-polymerized with styrene for Suzuki reactions in water-ethanol solution

Co-polymer of 3-(2,3-dihydroxypropyl)-1-vinylimidazolium chloride and styrene was synthesized and used as a support of Pd nanoparticles. The Pd@poly-Sty-co-diOH-Cl catalyst can efficiently catalyze Suzuki reactions for a wide range of aryl iodides and bromides with 0.05 mol % Pd at 70 °C in water-ethanol solution under air, and the catalyst can be recycled and reused for several times without significant loss of activity.     

The heterogeneous catalytic heck reaction in an ionic liquid

The C-C cross coupling reaction between bromobenzene and styrene in the presence of Pd deposited on mesoporous acetylene soot (Pd/C) occurred in a tetraalkylammonium ionic liquid (IL) as a truly heterogeneous catalytic process. The active palladium form was not transferred into the reaction solution. Deposited palladium activation was observed when the Pd/C catalyst was preliminarily heated in the IL in the presence of dibutylamine as a base.     

Suzuki cross-coupling reactions catalyzed by palladium nanoparticles in aqueous solution

Palladium nanoparticles stabilized by poly(N-vinyl-2-pyrrolidone) (PVP) are efficient catalysts for the Suzuki reactions in aqueous medium. The time dependence of the fluorescence intensity of the biphenyl product in the reaction between iodobenzene and phenylboronic acid is used to determine the initial rate of the catalytic reaction. The initial rate depends linearly on the concentration of Pd catalyst, suggesting that the catalytic reaction occurs on the surface of the Pd nanoparticles.     

Asymmetric aldol reaction catalyzed by the anion of an ionic liquid

Herein we report the synthesis of a chiral imidazolium salt derived from trans-L-hydroxyproline and its applications as a catalyst for the asymmetric aldol reaction. By performing the aldol reaction in [Bmim]NTf(2) as a solvent, we report excellent isolated yields of the aldol product (up to 99%), as well as modest to excellent selectivities (dr superior to 99:1. ee up to 89%). Mechanistic insights and the origins of the selectivity of the aldol reaction are discussed on the basis of the results obtained with two catalytic imidazolium salts having different H-bonding potential.     

Effect of catalysis on the stability of metallic nanoparticles: Suzuki reaction catalyzed by PVP-palladium nanoparticles

The small size of nanoparticles makes them attractive in catalysis due to their large surface-to-volume ratio. However, being small raises questions about their stability in the harsh chemical environment in which these nanoparticles find themselves during their catalytic function. In the present work, we studied the Suzuki reaction between phenylboronic acid and iodobenzene catalyzed by PVP-Pd nanoparticles to investigate the effect of catalysis, recycling, and the different individual chemicals on the stability and catalytic activity of the nanoparticles during this harsh reaction. The stability of the nanoparticles to the different perturbations is assessed using TEM, and the changes in the catalytic activity are assessed using HPLC analysis of the product yield. It was found that the process of refluxing the nanoparticles for 12 h during the Suzuki catalytic reaction increases the average size and the width of the distribution of the nanoparticles. This was attributed to Ostwald ripening in which the small nanoparticles dissolve to form larger nanoparticles. The kinetics of the change in the nanoparticle size during the 12 h period show that the nanoparticles increase in size during the beginning of the reaction and level off toward the end of the first cycle. When the nanoparticles are recycled for the second cycle, the average size decreases. This could be due to the larger nanoparticles aggregating and precipitating out of solution. This process could also explain the observed loss of the catalytic efficiency of the nanoparticles during the second cycle. It is also found that the addition of biphenyl to the reaction mixture results in it poisoning the active sites and giving rise to a low product yield. The addition of excess PVP stabilizer to the reaction mixture seems to lead to the stability of the nanoparticle surface and size, perhaps due to the inhibition of the Ostwald ripening process. This also decreases the catalytic efficiency of the nanoparticles due to capping of the nanoparticle surface. The addition of phenylboronic acid is found to lead to the stability of the size distribution as it binds to the particle surface through the O(-) of the OH group and acts as a stabilizer. Iodobenzene is found to have no effect and thus probably does not bind strongly to the surface during the catalytic process. These two results might have an implication on the catalytic mechanism of this reaction.     

Palladium nanoparticles supported on modified hollow Fe3O4@TiO2: Preparation,characterization, and catalytic activity in Suzuki cross‐coupling reactions

Hollow Fe₃O₄@TiO₂‐NH₂/Pd as a light‐weight, magnetically heterogeneous catalyst was successfully prepared, and characterized by using different techniques including X‐ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), vibrating sample magnetometer (VSM) measurements, and thermogravimetric analysis (TGA). Then this heterogeneous catalyst was tested in the Suzuki cross‐coupling reaction, and the results confirmed the success of this method. The catalyst could be separated easily using an external magnet and reused at least in five runs successfully without any appreciable loss in its catalytic activity.     

Shape-dependent catalytic activity of copper oxide-supported Pd(0) nanoparticles for Suzuki and cyanation reactions

Palladium nanoparticles supported on different shapes of nanocrystalline CuO are prepared by the treatment of Cu(NO₃)₂ and Pd(OAc)₂ in polyethylene glycol (PEG-6000). The shapes of the CuO/Pd composite are dependent on the amount of PEG used. Suzuki coupling was catalyzed efficiently by the oval-shaped material, whereas the rod shape facilitates the cyanation reaction. The CuO/Pd catalyst is recovered and reused for subsequent Suzuki reactions; however, cyanation poisons the catalyst for further use. Both these reactions are very clean and high yielding.     

Palladium catalyzed cycloisomerization of 2,2-diallylmalonates in imidazolium ionic liquids

A series of palladium salts and complexes, including PdCl₂, PdCl₂/AgPF₆, PdCl₂(PhCN)₂, PdBr₂ and Pd₂(dba)₃ were used in imidazolium ionic liquids as catalysts for the cycloisomerization of diethyl 2,2-diallylmalonate. The order of reactivity follows the expected Pd atom hardness and, therefore, “naked” Pd²⁺ generated from PdCl₂ + AgPF₆ gives the highest turnover frequencies. The system comprising Pd species dissolved in ionic liquid can be reused with minor decrease in conversion, but with an apparent variation in the product distribution. The latter comes from a diminished catalytic activity and from formation of Brönsted acid sites. Finally, by using 1,10-undecadiene derivative we have observed that this Lewis acid induced cycloisomerization is specific for the formation of five-member rings.     

Palladium nanoparticles supported on cucurbit[6]uril: an efficient heterogeneous catalyst for the Suzuki reaction under mild conditions

A new NC palladacycle was synthesized and supported on cucurbit[6]uril (CB[6]). The CB[6]‐supported palladium was used as an efficient nanocatalyst for the Suzuki reaction. In these reactions various aryl halides were reacted with arylboronic acids in H₂O–EtOH at both room temperature and 40 °C. The obtained Pd nanocatalyst exhibited excellent reactivity and stability in C ? C bond formation, which confirms that the catalyst is a completely active heterogeneous species. The Pd nanocatalyst was characterized using X‐ray diffraction, scanning electron microscopy and transmission electron microscopy. Copyright © 2014 John Wiley & Sons, Ltd.     

Cyclotrimerization of an aliphatic aldehyde catalyzed by acidic ionic liquid

Without any additional organic solvent, the cyclotrimerization of aliphatic aldehyde could be catalyzed by acidic ionic liquid. Under optimum reaction conditions (298 K, 1 h, a molar ratio of 60:1 of isobutyraldehyde to ionic liquid), the conversion rate and selectivity for cyclotrimerization of isobutyraldehyde were 93.0 and 100%, respectively. The liquid product formed a separate phase that was decanted and the solid product could be separated by extraction. The ionic liquid could be easily reused after removal of water under vacuum.     

The use of an ionic liquid in asymmetric catalytic allylic amination

Asymmetric amination of 1,3-diphenyl-2-propenyl acetate with di-n-propylamine catalysed by palladium/P^∗-chiral diamidophosphites was carried out in ionic liquid, THF and CH₂Cl₂ with up to 90% ee. The catalyst can be reused three times without loss in enantioselectivity.     

A synthesis of diethyl alkylsulfanylmethylmalonates catalyzed by KOH in an ionic liquid

Abstract  

1-Ethyl-3-methylimidazolium bromide was used as a green recyclable alternative to volatile organic solvents for KOH catalyzed three-component synthesis of diethyl alkylsulfanylmethylmalonates from aldehydes, diethyl malonate, and alkylthiols.