应用于局域表面等离激元共振扫描显微探针的球形Au@Ag纳米粒子的合成及介电敏感性检测

局域表面等离激元共振(LSPR)显微探针的检测灵敏性主要取决于针尖上修饰的纳米粒子的LSPR性质.本文采用阴离子辅助法,在水溶液中通过调节Au核与Ag⁺的物质的量之比,实现Au核上不同厚度的Ag壳层包覆,可控地一步合成均一性好、银壳层较厚(≥10 nm)的核壳比不同的球形Au@Ag纳米粒子.通过扫描电镜(SEM)、透射电镜(TEM)及扫描透射电子显微镜X射线能谱(STM-EDS)线扫描分析对不同核壳比的Au@Ag纳米粒子进行形貌组成表征,证实了所合成核壳结构的可控性.将不同核壳比的Au@Ag纳米粒子置于不同折射率溶液中进行纳米粒子介电敏感性的研究,表明7.5 nm Au@28 nm Ag的纳米结构具有最高的品质因子.同时将不同核壳比的Au@Ag纳米粒子置于不同折射率的非导电性基底上进行单颗纳米粒子散射性质的研究,结果表明7.5 nm Au@28 nm Ag纳米粒子适合作为LSPR显微探针的高检测灵敏性纳米结构之一.     

Full-color tuning of surface plasmon resonance by compositional variation of Au@Ag core-shell nanocubes with sulfides

In the present study, we demonstrate the precise tuning of surface plasmon resonance over the full visible range by compositional variation of the nanoparticles. The addition of sulfide ions into the Au@Ag core-shell nanocubes generates stable Au@Ag/Ag(2)S core-shell nanoparticles at room temperature, and the plasmon extinction maximum shifts to the longer wavelength covering the entire visible range of 500-750 nm. Based on the optical property, the Au@Ag core-shell nanocubes are employed as a colorimetric sensing framework for sulfide detection in water. The detection limit is measured to be 10 ppb by UV-vis spectroscopy and 200 ppb by naked eyes. Such nanoparticles would be useful for decoration and sensing purposes, due to their precise color tunability and high stability.     

Epitaxial growth of heterogeneous metal nanocrystals: from gold nano-octahedra to palladium and silver nanocubes

With octahedral Au nanocrystals as seeds, highly monodisperse Au@Pd and Au@Ag core-shell nanocubes were synthesized by a two-step seed-mediated method in aqueous solution. Accordingly, we have preliminarily proposed a general rule that the atomic radius, bond dissociation energy, and electronegativity of the core and shell metals play key roles in determining the conformal epitaxial layered growth mode.     

A visual photothermal paper sensor for H_2S recognition through rational modulation LSPR wavelength of plasmonics

It is known that the localized surface plasmon resonance(LSPR) wavelength of plasmonics is highly dependent on compositions and geometry of plasmonics as well as the surrounding environments. Here, monodispersed Au@Ag core-shell nanoparticles(Au@Ag NPs) were prepared by carefully optimizing the shell thickness of Au@Ag NPs, and the presence of hydrogen sulfide(H_2 S) would significantly alter the LSPR wavelength. On the basis of this, a photothermal paper sensor for on-site recognition of H_2 S was constructed with a visual detection limit of 12.8 ng/L.     

A visual photothermal paper sensor for H<Subscript>2</Subscript>S recognition through rational modulation LSPR wavelength of plasmonics

It is known that the localized surface plasmon resonance (LSPR) wavelength of plasmonics is highly dependent on compositions and geometry of plasmonics as well as the surrounding environments. Here, monodispersed Au@Ag core-shell nanoparticles (Au@Ag NPs) were prepared by carefully optimizing the shell thickness of Au@Ag NPs, and the presence of hydrogen sulfide (H₂S) would significantly alter the LSPR wavelength. On the basis of this, a photothermal paper sensor for on-site recognition of H₂S was constructed with a visual detection limit of 12.8 ng/L.     

Synergistic catalysis of Au@Ag core-shell nanoparticles stabilized on metal-organic framework

For the first time, this work presents Au@Ag core-shell nanoparticles (NPs) immobilized on a metal-organic framework (MOF) by a sequential deposition-reduction method. The small-size Au@Ag NPs reveal the restriction effects of the pore/surface structure in the MOF. The modulation of the Au/Ag ratio can tune the composition and a reversed Au/Ag deposition sequence changes the structure of Au-Ag NPs, while a posttreatment process transforms the core-shell NPs to a AuAg alloy. Catalytic studies show a strong bimetallic synergistic effect of core-shell structured Au@Ag NPs, which have much higher catalytic activities than alloy and monometallic NPs.     

Flower-like Au/Ag/TiO_2 nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO_2 coated Au nanostars and core-shell Au@Ag natiostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF_4 under an acidic environment.The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO_2 nanoparticles.The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO_2 shell.     

Flower-like Au/Ag/TiO<Subscript>2</Subscript> nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO₂ coated Au nanostars and core-shell Au@Ag nanostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF₄ under an acidic environment. The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO₂ nanoparticles. The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO₂ shell.     

Growth of Au@Ag Core–Shell Pentatwinned Nanorods: Tuning the End Facets

Au@Ag core–shell nanorods with tunable end facets are obtained by coating Au bipyramids (BPs) with Ag. The resultant nanorods exhibit a pentatwinned crystal structure with tips terminated with either {110} or {111} facets. The control over the end facets is achieved by varying the capping agents and tuning the reduction rate of Ag. Specifically, when Ag is reduced slowly, Au@Ag nanorods with flat {110} end facets are formed with cetyltrimethylammonium bromide (CTAB) as the capping agent. If CTAB is replaced with cetyltrimethylammonium chloride (CTAC), Au@Ag nanorods with tips terminated with {111} facets are obtained. However, at a high Ag reduction rate, dumbbell‐shaped Au@Ag nanorods are formed, with either CTAB or CTAC as the capping agent. The morphological evolution of the nanorods in each case is closely followed and a growth mechanism is proposed.     

金@银核壳纳米粒子的制备和形貌的精确控制及其表面增强拉曼光谱性能

用种子生长法制备了金@银核壳结构的纳米粒子。在制备过程中通过控制氯金酸的浓度和硝酸银的体积,得到了不同粒径的金核和不同厚度的银壳构成的核壳纳米粒子。从而得到了具有不同SERS性能的金@银核壳纳米粒子。并选取具有最佳SERS性能的金@银核壳纳米粒子实现了对罗丹明6G的微量检测。     

Patterned arrays of au rings for localized surface plasmon resonance

In this paper, we examined the characteristic behavior of localized surface plasmon resonances (LSPR) of Au dot and ring arrays in response to the selective binding of biomolecules. To do this, patterned arrays of Au rings and dots with various feature scales were fabricated over large areas by an imprint lithography technique. Our results showed that the LSPR spectra of the Au nanorings exhibited a blue shift with increase in the ring widths and asymptotically converged to those for Au nanodots. This clearly implies that the LSPR spectra can be tuned over an extended wavelength range by varying the ring width. For an illustrative purpose, the patterned Au structures were used to detect the binding of streptavidin to biotin. In doing this, the Au patterns were chemically modified with G4 dendrimers of amine terminated poly(amidoamine), which facilitated the tethering of biotin onto the Au pattern. Exposure of the biotinylated Au nanorings to aqueous streptavidin solution induced both red-shifts of the LSPR spectra and changes in the peak intensities. The sensitivity of the LSPR spectra to the binding of the biomolecules was enhanced as the ring width of Au rings was decreased.     

金@银核壳纳米粒子的制备和形貌的精确控制及其表面增强拉曼光谱性能

用种子生长法制备了金@银核壳结构的纳米粒子。在制备过程中通过控制氯金酸的浓度和硝酸银的体积,得到了不同粒径的金核和不同厚度的银壳构成的核壳纳米粒子。从而得到了具有不同SERS性能的金@银核壳纳米粒子。选取具有最佳SERS性能的金@银核壳纳米粒子实现了对罗丹明6G的微量检测。     

Facile synthesis and electrochemiluminescence application of concave trisoctahedral Pd@Au core-shell nanocrystals bound by {331} high-index facets

Concave trisoctahedral (TOH) Pd@Au core-shell nanocrystals bound by {331} facets have been synthesized for the first time. Pd nanocubes and cetyltrimethylammonium chloride were used as the structure-directing cores and capping agents, respectively. Their optical and electrocatalytic properties were investigated.     

Facet-dependent and au nanocrystal-enhanced electrical and photocatalytic properties of Au-Cu2O core-shell heterostructures

We report highly facet-dependent electrical properties of Cu(2)O nanocubes and octahedra and significant enhancement of gold nanocrystal cores to the electrical conductivity of Au-Cu(2)O core-shell octahedra. Cu(2)O nanocubes and octahedra and Au-Cu(2)O core-shell cubes and octahedra were synthesized by following our reported facile procedures at room temperature. Two oxide-free tungsten probes attached to a nanomanipulator installed inside a scanning electron microscope made contacts to a single Cu(2)O nanocrystal for the I-V measurements. Pristine Cu(2)O octahedra bounded by {111} facets are 1100 times more conductive than pristine Cu(2)O cubes enclosed by {100} faces, which are barely conductive. Core-shell cubes are only slightly more conductive than pristine cubes. A 10,000-fold increase in conductivity over a cube has been recorded for an octahedron. Remarkably, core-shell octahedra are far more conductive than pristine octahedra. The same facet-dependent electrical behavior can still be observed on a single nanocrystal exposing both {111} and {100} facets. This new fundamental property may be observable in other semiconductor nanocrystals. We also have shown that both core-shell cubes and octahedra outperform pristine cubes and octahedra in the photodegradation of methyl orange. Efficient photoinduced charge separation is attributed to this enhanced photocatalytic activity. Interestingly, facet-selective etching occurred over the {100} corners of some octahedra and core-shell octahedra during photocatalysis. The successful preparation of Au-Cu(2)O core-shell heterostructures with precise shape control has offered opportunities to discover new and exciting physical and chemical properties of nanocrystals.     

Shape-controllable gold nanocrystallization using an amphiphilic polythiophene

Fine shape-control of gold nanoparticles was achieved in the presence of an amphiphilic polythiophene with an isothiouronium pendant, by varying the experimental conditions for the crystallization; we succeeded to prepare π-conjugated polythiophene-capped Au nanoplates, Au nanocubes and Au nanoparticles with an average spherical diameter of (7.7 ± 1.6) nm.     

Heteroepitaxial growth of high-index-faceted palladium nanoshells and their catalytic performance

The development of high-performance nanocatalysts relies essentially on the generation of stable and active surface sites at the atomic scale through synthetic control of the size, shape, and chemical composition of nanoscale metals and metal oxides. One promising route is to induce the exposure of catalytically active high-index facets of nanostructures through shape-controlled syntheses. We have designed and prepared two types of Pd nanoshells that are enclosed by high-index {730} and {221} facets through heteroepitaxial growth on high-index-faceted Au nanocrystals. The turnover numbers per surface atom of the high-index-faceted Pd nanoshells have been found to be 3-7 times those of Pd and Au-Pd core-shell nanocubes that possess only {100} facets in catalyzing the Suzuki coupling reaction. These results open up a potential for the development of inexpensive and highly active metal nanocatalysts.     

银包金纳米棒的形成及维生素C的局域等离子体共振吸收位移测定法

本文以金纳米棒作为信号感应载体,在pH9.4弱碱性条件下通过维生素C还原AgNO3从而在金纳米棒表面形成包裹层,进而改变金纳米棒的等离子体共振吸收位移,据此建立了一种快速、简单、灵敏的维生素C的等离子体共振吸收位移测定法.方法的线性范围为0.25～10.0μmol/L,检出限(3σ)为0.12mol/L.该方法成功用于维生素C片剂分析,加标回收率95.4%～106.0%.与药典方法进行对比,有满意的精密度和准确度.     

Facile Synthesis of Ag Nanocubes of 30 to 70 nm in Edge Length with CF3COOAg as a Precursor

This paper describes a new protocol to synthesize Ag nanocubes of 30 to 70 nm in edge length with the use of CF₃COOAg as a precursor to elemental silver. By adding a trace amount of NaSH and HCl to the polyol synthesis, Ag nanocubes were obtained with good quality, high reproducibility, and on a scale up to 0.19 g per batch for the 70 nm Ag nanocubes. The Ag nanocubes were found to grow in size at a controllable pace over the course of synthesis. The linear relationship between the edge length of the Ag nanocubes and the position of localized surface plasmon resonance (LSPR) peak provides a simple method for finely tuning and controlling the size of the Ag nanocubes by monitoring the UV/Vis spectra of the reaction at different times.     

基于金纳米棒的核壳纳米结构及其光学性质研究

以金纳米棒为核的核壳结构纳米粒子由于它独特的光学性质、结构特点以及在催化、表面增强拉曼散射方面的应用前景,成为目前纳米材料研究的热点之一。本文重点介绍以金纳米棒为核,包覆其他无机材料的核/壳结构之合成方法,同时阐述其结构特征、光学性质以及外界条件对结构和性质的影响。其中,由于金银纳米核壳结构的研究开始最早,研究最为深入,故对其进行重点阐述。最后对以金纳米棒为核的核壳结构未来研究进行了展望。     

Fabrication of core-shell structured nanoparticle layer substrate for excitation of localized surface plasmon resonance and its optical response for DNA in aqueous conditions

LSPR from nanostructured noble metals such as gold and silver offers great potential for biosensing applications. In this study, a core-shell structured nanoparticle layer substrate was fabricated and the localized surface plasmon resonance (LSPR) optical characteristics were investigated for DNA in aqueous conditions. Factors such as DNA length dependence, concentration dependence, and the monitoring of DNA aspects (ssDNA or dsDNA) were measured. Different lengths and concentrations of DNA solutions were introduced onto the surface of the substrate and the changes in the LSPR optical characteristics were measured. In addition, to monitor the changes in LSPR optical characteristics for different DNA aspects, a DNA solutions denatured by means of heat or alkali were introduced onto the surface, after which optical characterization of the core-shell structured nanoparticle substrate was carried out. With this core-shell structured nanoparticle layer for the excitation of LSPR, the dependence upon specific DNA conditions (length, concentration, and aspect) could be monitored. In particular, the core-shell structured nanoparticle layer substrate could detect DNA of length 100-5000 bp and 400-bp DNA at a concentration of 4.08 ng mL⁻¹ (1 × 10⁷ DNA molecules mL⁻¹). Furthermore, the changes in LSPR optical characteristics with DNA aspect could be monitored. Thus, LSPR-based optical detection using a core-shell structured nanoparticle layer substrate can be used to determine the kinetics of biomolecular interactions in a wide range of practical applications such as medicine, drug delivery, and food control.