Theoretical investigations of the reactivities of saturated five-membered ring N-heterocyclic carbenes with heavier group 14 elements

The potential energy surfaces for the chemical reactions of group 14 carbenes have been studied using density functional theory (B3LYP/LANL2DZ). Five saturated five-membered-ring N-heterocyclic carbene Dipp[upper bond 1 start]N(CH(2))(2)N(Dipp)E[upper bond 1 end]: (five-ring-E:) species, where E = C, Si, Ge, Sn and Pb, have been chosen as model reactants in this work. Also, four kinds of chemical reactions; addition of water, methane insertion, alkene cycloaddition and dimerization, have been used to study the chemical reactivities of these group 14 carbenes. The present theoretical investigations suggest that the relative carbenic reactivity decreases in the order: C > Si > Ge > Sn > Pb. That is, the heavier the group 14 atom (E), the more stable is the carbene towards chemical reactions. This may be the reason that there have been many instances reported of the synthesis and characterization of stable group 14 five-membered-ring N-heterocyclic carbene species with various alkyl protecting substituents at room temperature. Furthermore, the singlet-triplet energy splitting of the five-ring-E:, as described in the configuration mixing model attributed to the work of Pross and Shaik, can be used as a diagnostic tool to predict their reactivities. The results obtained allow a number of predictions to be made.     

A computational study of the reactivities of four-membered heavy carbene systems

The potential energy surfaces for the chemical reactions of four-membered N-heterocyclic group 14 heavy carbene species have been studied using density functional theory (B3LYP/LANL2DZ). Five four-membered group 14 heavy carbene species, (i-Pr)(2) NP(NR)(2) E:, in which E = C, Si, Ge, Sn, and Pb, were chosen as the model reactants in this work. Also, four kinds of chemical reactions, C-H bond insertion, water addition, alkene cycloaddition, and dimerization, have been used to study the chemical reactivities of these group 14 four-membered N-heterocyclic carbene species. Basically, our present theoretical work predicts that the larger the ∠NEN bond angle of the four-membered group 14 heavy carbene species, the smaller the singlet-triplet splitting, the lower the activation barrier, and, in turn, the more rapid, its chemical reactions to various chemical species. Moreover, our theoretical investigations suggest that the relative carbenic reactivity decreases in the order: C > Si > Ge > Sn > Pb. That is, the heavier the group 14 atom (E), the more stable is its four-membered carbene toward chemical reactions. As a result, our results predict that the four-membered group 14 heavy carbene species (E = Si, Ge, Sn, and Pb) should be more kinetically stable than the observed carbene species and, thus, can be also readily synthesized and isolated at room temperature. Furthermore, the singlet-triplet energy splitting of the four-membered group 14 carbene species, as described in the configuration mixing model attributed to the work of Pross and Shaik, can be used as a diagnostic tool to predict their reactivities. The results obtained allow a number of predictions to be made.     

Theoretical investigations of the reactivities of cationic six-membered carbene analogues of group 14 elements

The potential energy surfaces for the chemical reactions of cationic six-membered group 14 heavy carbene species have been studied using density functional theory (B3LYP/LANL2DZ) and CCSD (CCSD/LANL2DZ//B3LYP/LANL2DZ) methods. Five six-membered group 14 cationic heavy carbene species, [HC(CMeNPh)2E:](+), where E = C, Si, Ge, Sn, and Pb, have been chosen as model reactants in this work. Also, four kinds of chemical reaction, C-H bond insertion, multiple bond cycloaddition, dimerization, and O-H bond insertion, have been used to study the chemical reactivities of these group 14 cationic carbene species. Basically, our present theoretical work predicts that the larger the angle NEN bond angle and the smaller the singlet-triplet splitting of the carbene, the lower its activation barriers will be and, in turn, the more rapid are its chemical reactions with other species. Moreover, the theoretical investigations suggest that the relative carbenic reactivity decreases in the order C > Si > Ge > Sn > Pb. That is, the heavier the group 14 atom (E), the more stable is its cationic carbene toward chemical reaction. As a result, we predict that the cationic six-membered group 14 carbene species (E = C, Si, Ge, Sn, and Pb) should be stable, readily synthesized, and isolated at room temperature. Our computational results are in good agreement with the available experimental observations. Furthermore, the singlet-triplet energy splitting of the carbene, as described in the configuration mixing model attributed to the work of Pross and Shaik, can be used as a diagnostic tool to predict its reactivities. The results obtained allow a number of predictions to be made.     

Mechanism of abstraction reactions of dimetallenes (R2X=XR2; X = C, Si, Ge, Sn, Pb) with halocarbons: a theoretical study

Potential energy surfaces for the abstraction reactions of dimetallenes with halocarbons have been studied using density functional theory (B3LYP). Five dimetallene species, (SiH(3))(2)X=X(SiH(3))(2), where X = C, Si, Ge, Sn, and Pb, have been chosen in this work as model reactants. The present theoretical investigations suggest that the relative dimetallenic reactivity increases in the order C=C < Si=Si < Ge=Ge < Sn=Sn < Pb=Pb. That is to say, for halocarbon abstractions there is a very clear trend toward lower activation barriers and more exothermic reactions on going from C to Pb. Moreover, for a given dimetallene, the overall barrier heights are determined to be in the order CF(4) > CCl(4) > CBr(4) > CI(4). That is, the heavier the halogen atom (Y), the more facile its abstraction from CY(4). Halogen abstraction is always predicted to be much faster than the abstraction of a CY(3) group irrespective of the dimetallene or halocarbon involved. Our model conclusions are consistent with some available experimental findings. Furthermore, both a configuration mixing model based on the work of Pross and Shaik and bonding dissociation energies can be used to rationalize the computational results. These results allow a number of predictions to be made.     

Theoretical investigation of the mechanisms for the reaction of fused tricyclic dimetallenes containing highly strained E═E (E = C, Si, Ge, Sn, and Pb) double bonds

The potential energy surfaces for the reactions of fused tricyclic dimetallenes that feature a highly strained E═E double bond, Rea-E═E, where E = C, Si, Ge, Sn, and Pb, were studied using density functional theory (B3LYP/LANL2DZ). Three types of chemical reactions (i.e., a self-isomerization reaction, a [2 + 2] cycloaddition with a ketone and a methanol 1,2-addition reaction) were used to determine the reactivity of the Rea-E═E molecules. The theoretical findings reveal that the smaller the singlet-triplet splitting of the Rea-E═E, the lower are its activation barriers and, in turn, the more rapid are its chemical reactions with other chemical molecules. Theoretical observations suggest that the relative reactivity increases in the following order: C═C ? Si═Si < Ge═Ge < Sn═Sn < Pb═Pb. Namely, the smaller the atomic weight of the group 14 atom (E), the smaller is the atomic radius of E and the more stable is its fused tricyclic Rea-E═E to chemical reaction. It is thus predicted that the fused tricyclic Rea-C═C and Rea-Si═Si molecules should be stable and readily synthesized and isolated at room temperature. The computational results show good agreement with the available experimental observations. The theoretical results obtained from this work allow a number of predictions to be made.     

Exploratory synthesis in molten salts: role of flux basicity in the stabilization of the complex thiogermanates Cs(4)Pb(4)Ge(5)S(16), K(2)PbGe(2)S(6), and K(4)Sn(3)Ge(3)S(14)

The influence of the Lewis basicity of alkali polysulfide fluxes (A(2)S(x)) (A = alkali) as a function of x on the respective reactivities of Pb and Sn with Ge was studied and found to be strong. Cs(4)Pb(4)Ge(5)S(16), K(2)PbGe(2)S(6), and K(4)Sn(3)Ge(3)S(14) could be prepared only under low basicity with S/A(2)S ratios of > or =11. These compounds display complex frameworks and are semiconductors. Cs(4)Pb(4)Ge(5)S(16) is luminescent with red emission.     

Infrared spectra of group 14 hydrides in solid hydrogen: experimental observation of PbH4, Pb2H2, and Pb2H4

Laser-ablated Si, Ge, Sn, and Pb atoms have been co-deposited with pure hydrogen at 3.5 K to form the group 14 hydrides. The initial SiH(2) product reacts completely to SiH(4), whereas substantial proportions of GeH(2), SnH(2), and PbH(2) are trapped in solid hydrogen. Further hydrogen atom reactions form the trihydride radicals and tetrahydrides of Ge, Sn, and Pb. The observation of PbH(4) at 1815 cm(-)(1) and PbD(4) at 1302 cm(-)(1) is in agreement with the prediction of quantum chemical calculations for these unstable tetrahydride analogues of methane. In addition, new absorptions are observed for Pb(2)H(2) and Pb(2)H(4), which have dibridged structures based on quantum chemical calculations.     

Theoretical study of addition reactions of heavy carbenes to carbon and boron nitride nanotubes

In an effort to gain insight into the activation energies and reaction enthalpies of the chemical functionalization of carbon and boron nitride nanotubes, calculations using density functional theory have been carried out for the cycloaddition of a heavy carbene to a single-walled carbon (SWCNT; C(130)H(20)) and a boron nitride (SWBNNT; B(65)N(65)H(20)) nanotube. The (CH(3))(2)X + SWCNT and (CH(3))(2)X + SWBNNT (X = C, Si, Ge, Sn, and Pb) reactions are the subject of the present study. All the stationary points were determined at the B3LYP/LANL2DZ level of theory. The major conclusions that can be drawn from this work are as follows: (i) Considering both the activation barrier and reaction enthalpy based on the model calculations presented here, it is found that the order of (CH(3))(2)X reactivity is X = C > Si > Ge > Sn > Pb, irrespective of whether cycloaddition is to a SWCNT or a SWBNNT sidewall. That is to say, (CH(3))(2)C and (CH(3))(2)Si can readily add to the sidewalls of SWCNT and SWBNNT, whereas (CH(3))(2)Ge, (CH(3))(2)Sn, and (CH(3))(2)Pb are unreactive. (ii) Since the chemical reactivities of SWCNT and SWBNNT sidewalls closely resemble those of the small C(16)H(10) and B(8)N(8)H(10) molecules, at least in a qualitative sense, the use of the above small molecules as models is sufficient to provide qualitatively correct results. (iii) Our theoretical observations indicate that all the (5,5) SWCNT and SWBNNT cycloadducts favor opened rather than closed three-membered ring structures. (iv) The theoretical investigations demonstrate that the singlet-triplet splitting of the carbene species (R(2)X) as well as that of the small model molecules can be used as a diagnostic tool to predict the addition reactivities of carbene analogues and sidewalls of various nanotubes, respectively. Moreover, the results obtained in this work allow a number of predictions to be made.     

杂硼原子簇XB6+ (X=C,Si, Ge,Sn, Pb)的稳定性和芳香性

利用从头算MP2方法和密度泛函理论B3LYP和B3PW91方法, 研究了杂硼原子簇XB₆⁺ (X=C, Si, Ge, Sn, Pb)的结构、稳定性及化学键合情况. 对C, Si, Ge, B使用6-311+G(d)基组, 对Sn和Pb使用LANL2DZ赝势基组. 研究结果表明, 具有C_s对称性的假平面XB₆⁺ (X=C, Si, Ge, Sn, Pb)结构是势能面上的全域极小点, 其稳定性要高于C_6v对称性的锥形结构和C₂对称性的假锥形结构. 在B3LYP水平上, 对这些异构体的势能面的极小点进行了自然键轨道(NBO)的分析; 对最稳定构型的最高占据分子轨道(HOMO)和最低空轨道(LUMO)能级差、分子轨道(MO)和核独立化学位移(NICS)进行了计算和讨论. 分析了杂原子和硼原子间、相邻硼原子间的键合情况, 讨论了最稳定构型的芳香性质.     

Chemistry of Complexes of Group 14 Elements Based on Redox-Active Ligands of the <Emphasis Type="Italic">o</Emphasis>-Iminoquinone Type

Specific features of the synthesis and structures of the complexes of Group 14 elements (Si, Ge, Sn, Pb) with o-iminoquinone ligands are discussed. The chemical reactions of the above indicated compounds accompanied by the transformation of the redox-active ligand in the coordination sphere of the complex- forming agent are considered.     

Chemical Behaviour of a Prototype Boryl(phosphino)carbene

We recently disclosed the synthesis of a novel “push–pull” boryl(phosphino)carbene. To determine the influence of this substitution pattern on the chemical behaviour, a study into the reactivity of the prototype ( 1 ) of this new family of B(sp²)‐substituted phosphinocarbenes was undertaken. Carbene 1 exhibits one of the most common intramolecular rearrangements of singlet carbenes, involving a 1,2‐mesityl shift, and typical [2+1] cycloaddition reactions with electron‐poor acrylonitrile. A pronounced α,β‐ambiphilic character was also shown by the reaction of 1 with benzaldehyde, leading to phosphorylalkene 4 . Due to its specific electronic properties, carbene 1 also exhibits unprecedented reactivity with chloroacrylonitrile, enabling the formation of bicyclo[1.1.0]phosphetanium salt 6 and borylcyclopropene 9 , which have been fully characterised by NMR spectroscopy and X‐ray crystallography.     

Theoretical study on the reactivities of stannylene and plumbylene and the origin of their activation barriers

The potential energy surfaces corresponding to the reactions of heavy carbenes with various molecules were investigated by employing computations at the B3LYP and CCSD(T) levels of theory. To understand the origin of barrier heights and reactivities, the model system (CH3)2X+Y (X=C, Si, Ge, Sn, and Pb; Y=CH4, SiH4, GeH4, CH3OH, C2H6, C2H4, and C2H2) was chosen for the present study. All reactions involve initial formation of a precursor complex, followed by a high-energy transition state, and then a final product. My theoretical investigations suggest that the heavier the X center, the larger the activation barrier, and the less exothermic (or the more endothermic) the chemical reaction. In particular, the computational results show that (CH3)2Sn does not insert readily into C-H, Si-H, C-H, Ge-H, or C-C bonds. It is also unreactive towards C=C bonds, but is reactive towards C identical with C and O-H bonds. My theoretical findings are in good agreement with experimental observations. Furthermore, a configuration mixing model based on the work of Pross and Shaik is used to rationalize the computational results. It is demonstrated that the singlet-triplet splitting of a heavy carbene (CH3)2X plays a decisive role in determining its chemical reactivity. The results obtained allow a number of predictions to be made.     

New heteroorganic betaines containing the (+)E15—C—E14—X(–) and (+)E15—C—E14(–) structural fragments (E15 = P,As; E14 = Si,Ge, Sn; X = C,S, O,NR)

The review surveys the data on the reactions of phosphorus and arsenic ylides with compounds containing E=X bonds (E = C, Si, Ge, or Sn; X = C or S), cyclic oligomers (R₂ES)_n (n = 2 or 3), and heavier analogs of carbenes. These reactions give rise to two new classes of heteroorganic betaines containing the ⁽⁺⁾E¹⁵—C—E¹⁴—X^(–) (I) and ⁽⁺⁾E¹⁵—C—E^14(–) (II) (E¹⁵ = P or As; E¹⁴ = Si, Ge, or Sn; X = C or S) structural fragments. Procedures for the synthesis of these compounds, their reactivities, the X-ray diffraction structures, and the electronic structures established by high-level quantum-chemical calculations are considered in detail. The carbon analogs of betaines of type I, viz., compounds bearing the ⁽⁺⁾P—C—C—X^(–) fragment (III), are also discussed. The latter were long considered as possible intermediates in the reactions of compounds containing the polar C=X bond (X = C, O, S, NR, etc.) with phosphorus ylides (classical Wittig and Corey—Chaykovsky reactions and related processes).     

Preparation, characterization, and theoretical analysis of group 14 element(I) dimers: a case study of magnesium(I) compounds as reducing agents in inorganic synthesis

A synthetic route to the new amidine (DipNH)(DipN)C(C(6)H(4)Bu(t)-4) (ButisoH; Dip = C(6)H(3)Pr(i)(2)-2,6) has been developed. Its deprotonation with either LiBu(n) or KN(SiMe(3))(2) yields the amidinate complexes [M(Butiso)] (M = Li or K). Their reactions with group 14 element halides/pseudohalides afford the heteroleptic group 14 complexes [(Butiso)SiCl(3)], [(Butiso)ECl] (E = Ge or Sn), and [{(Butiso)Pb(μ-O(3)SCF(3))(THF)}(∞)], all of which have been crystallographically characterized. In addition, the synthesis and spectroscopic characterization of the homoleptic complex [Pb(Butiso)(2)] is reported. Reductions of the heteroleptic complexes with a soluble magnesium(I) dimer, [{((Mes)Nacnac)Mg}(2)] ((Mes)Nacnac = [(MesNCMe)(2)CH](-); Mes = mesityl), have given moderate-to-high yields of the group 14 element(I) dimers [{(Butiso)E}(2)] (E = Si, Ge, or Sn), the X-ray crystallographic studies of which reveal trans-bent structures. The corresponding lead(I) complex could not be prepared. Comprehensive spectroscopic and theoretical analyses of [{(Butiso)E}(2)] have allowed their properties to be compared. All complexes possess E-E single bonds and can be considered as intramolecularly base-stabilized examples of ditetrelynes, REER. Taken as a whole, this study highlights the synthetic utility of soluble and easy to prepare magnesium(I) dimers as valuable alternatives to the harsh, and often insoluble, alkali-metal reducing agents that are currently widely employed in the synthesis of low-oxidation-state organometallic/inorganic complexes.     

Probing the electronic structure,chemical bonding,and excitation spectra of [CuE]+/0/− (E = 14 group element) diatomics employing DFT and ab initio methods

The electronic structure, chemical bonding, and excitation spectra of neutral, cationic, and anionic diatomic molecules of Cu and 14 group elements formulated as [CuE]^+/0/? (E = C, Si, Ge, Sn, Pb) were investigated by density functional theory (DFT) and time‐dependent (TD)‐DFT methods. The electronic and bonding properties of the diatomics analyzed by natural bond orbital (NBO) analysis approch revealed a clear picture of the chemical bonding in these species. The spatial organization of the bonding between Cu and E atoms in the [CuE]^+/0/? (E = Si, Ge, Sn, Pb) molecules can easily be recognized by the cut‐plane electron localization function representations. Particular emphasis was given on the absorption spectra of the [CuE]^+/0/? which were simulated using the results of TD‐DFT calculations employing the hybrid Coulomb‐attenuating CAM‐B3LYP functional. The absorption bands have thoroughly been analyzed and assignments of the contributing principal electronic transitions associated to individual excitations have been made. © 2012 Wiley Periodicals, Inc.     

Ab initio thermochemistry of the hydrogenation of hydrocarbon radicals using silicon-, germanium-, tin-, and lead-substituted methane and isobutane

A series of reactions of the type Y. + XH(4) --> YH + .XH(3) and Y'. + HX(CH(3))(3) --> Y'H + .X(CH(3))(3), where Y = H, CH(3); Y' = CH(3), C(CH(3))(3); and X = Si, Ge, Sn, Pb are studied using state-of-the-art ab initio electronic structure methods. Second-order M?ller-Plesset perturbation theory; the coupled-cluster singles, doubles, and perturbative triples method; and density functional theory are used with correlation-consistent basis sets (cc-pVNZ, where N = D, T, Q) and their pseudopotential analogs (cc-pVNZ-PP) to determine the transition-state geometries, activation barriers, and thermodynamic properties of these reactions. Trends in the barrier heights as a function of the group IVA atom (Si, Ge, Sn, and Pb) are examined. With respect to kinetics and thermodynamics, the use of a hydrogen attached to a group IVA element as a possible hydrogen donation tool in the mechanosynthesis of diamondoids appears feasible.     

Mechanism of the addition of nonenolizable aldehydes and ketones to (Di)metallenes (R(2)X=YR(2), X = Si,Ge Y = C,Si, Ge): a density functional and multiconfigurational perturbation theory study

The mechanism of the addition of nonenolizable aldehydes and ketones to group 14 (di)metallenes has been examined through a theoretical study of the addition of formaldehyde to Si=C, Ge=C, Si=Si, Si=Ge, and Ge=Ge bonds at the B3LYP/6-311++G(d,p) and CAS-MCQDPT2/6-31++G(d,p) levels of theory. The reaction pathways located can be grouped as either involving the formation of singlet diradical or zwitterionic intermediates or as concerted processes. Within each group of reaction pathways, several different mechanisms have been located, with not all mechanisms being available to all of the (di)metallenes. It was found that for reactions in which a Si-O bond results (i.e., addition to Si=C, Si=Si, and Si=Ge) both diradical and zwitterionic intermediates are possible; however, the formation of diradical intermediates was not found for reactions that result in the formation of a Ge-O bond (addition to Ge=C and Ge=Ge). The underlying cause of this pathway selectivity is examined, as well as the effect of solvent on the relative energies of the pathways. The results of the study shed light on the cause of experimentally obtained results regarding the mechanism of the reaction of (di)metallenes with nonenolizable ketones and aldehydes.     

Thermodynamic analysis of transport of impurities via halides by the close-spaced epitaxial growth of InP

A thermodynamic computation of the chemical equilibria that participate to the transport of InP by vapor phase chemical reactions is made for the system In/P/X/H (X = I, Cl) at 1000 and 900°K. The partial pressure of the InX₃ species is found to be negligible. A thermodynamic analysis of the chemical reactions involved in the transport of various impurities (Si, Ge, Sn, Pb, Zn, Cd, Mg, Cu, Mn, Al, Ga, S, Se and Te) during the InP epitaxial growth by the close-spaced method is presented. A large transport probability is found for S and Ga. No transport possibilities are found for the elements: Si, Zn, Cd, Mg, Cu, Se and Te. Transport possibilities through various chemical reactions are found for Ge, Sn, Pb, Mn and Al.     

Der Übergang vom „geordneten”︁ Anti-PbCl2-Gitter zum Anti-PbFCl-Gitter: Ternäre Phasen ABX der Erdalkalimetalle mit Elementen der 4. Hauptgruppe (A = Ca,Sr, Ba; B = Mg; X = Si,Ge, Sn,Pb)

The transition of the “ordered” anti-PbCl₂ lattice in the anti-PbFCl lattice: The ternary phases ABX of the alkaline earths with main group IV elements (A = Ca, Sr, Ba; B = Mg; X = Si, Ge, Sn, Pb) The compounds CaMgX, SrMgX and BaMgX (X = Si, Ge, Sn, Pb) were synthesized and their structures determined. CaMgX and SrMgX crystallize in the “ordered” Anti-PbCl₂-type and are therefore related to the binary compounds Ca₂X(X = Si, Ge, Sn, Pb), which form the Anti-PbCl₂-type too. The phases BaMgX build up the Anti-PbFCl-structure. The relations of these two different structures are discussed in respect to the radii of the components.