Doping light emitters into metal-organic frameworks

Space division with red cubes: Doping metal-organic frameworks with another metal component gives a further opportunity to tune their properties. Recent work successfully introduced europium into the inorganic nodes of frameworks. Although the doping element does not affect the framework topology, highly improved emissive performance was measured thanks to the intrinsic red emission of europium.     

A family of chiral metal-organic frameworks

Chiral metal–organic frameworks with a three‐dimensional network structure and wide‐open pores (>30 Å) were obtained by using chiral trifunctional linkers and multinuclear zinc clusters. The linkers, H₃ChirBTB‐n, consist of a 4,4′,4′′‐benzene‐1,3,5‐triyltribenzoate (BTB) backbone decorated with chiral oxazolidinone substituents. The size and polarity of these substituents determines the network topology formed under solvothermal synthesis conditions. The resulting chiral MOFs adsorb even large molecules from solution. Moreover, they are highly active Lewis acid catalysts in the Mukaiyama aldol reaction. Due to their chiral functionalization, they show significant levels of enantioselectivity, thereby proving the validity of the modular design concept employed.     

Fluorescent composite hydrogels of metal-organic frameworks and functionalized graphene oxide

GO MOFs! Azobenzoic acid functionalized graphene (A-GO) can act as a structure-directing template that influences hydrogel formation together with metal-organic frameworks (MOFs). Zn(2+) MOFs of pyridine derivatives work as framework linkers between the A-GO sheets (MOF-A-GO, see figure). MOF-A-GO exhibits a strong fluorescence enhancement upon gel formation. In addition, MOF-A-GO selectively recognizes trinitrotoluene.     

Assembly of the first fullerene-type metal-organic frameworks using a planar five-fold coordination node

Pump up the volume: Slow crystallization of Na[C(5) (CN)(5) ], the unsolvated sodium salt of pentacyanocyclopentadienide, gives the first example of an anionic coordination network based on metal-fullerene units. The structure of this network is closely related to a type?I gas clathrate in which around 66?% of the unit cell volume is occupied by solvent molecules.     

Functional mixed metal-organic frameworks with metalloligands

Immobilization of functional sites within metal-organic frameworks (MOFs) is very important for their ability to recognize small molecules and thus for their functional properties. The metalloligand approach has enabled us to rationally immobilize a variety of different functional sites such as open metal sites, catalytic active metal sites, photoactive metal sites, chiral pore environments, and pores of tunable sizes and curvatures into mixed metal-organic frameworks (M'MOFs). In this Minireview, we highlight some important functional M'MOFs with metalloligands for gas storage and separation, enantioselective separation, heterogeneous asymmetric catalysis, sensing, and as photoactive and nanoscale drug delivery and biomedical imaging materials.     

Modulated synthesis of Zr-based metal-organic frameworks: from nano to single crystals

We present an investigation on the influence of benzoic acid, acetic acid, and water on the syntheses of the Zr-based metal-organic frameworks Zr-bdc (UiO-66), Zr-bdc-NH(2) (UiO-66-NH(2)), Zr-bpdc (UiO-67), and Zr-tpdc-NH(2) (UiO-68-NH(2)) (H(2) bdc: terephthalic acid, H(2) bpdc: biphenyl-4,4'-dicarboxylic acid, H(2) tpdc: terphenyl-4,4'-dicarboxylic acid). By varying the amount of benzoic or acetic acid, the synthesis of Zr-bdc can be modulated. With increasing concentration of the modulator, the products change from intergrown to individual crystals, the size of which can be tuned. Addition of benzoic acid also affects the size and morphology of Zr-bpdc and, additionally, makes the synthesis of Zr-bpdc highly reproducible. The control of crystal and particle size is proven by powder XRD, SEM and dynamic light scattering (DLS) measurements. Thermogravimetric analysis (TGA) and Ar sorption experiments show that the materials from modulated syntheses can be activated and that they exhibit high specific surface areas. Water proved to be essential for the formation of well-ordered Zr-bdc-NH(2) . Zr-tpdc-NH(2), a material with a structure analogous to that of Zr-bdc and Zr-bpdc, but with the longer, functionalized linker 2'-amino-1,1':4',1'-terphenyl-4,4'-dicarboxylic acid, was obtained as single crystals. This allowed the first single-crystal structural analysis of a Zr-based metal-organic framework.     

Porous interpenetrated zirconium-organic frameworks (PIZOFs): a chemically versatile family of metal-organic frameworks

We present the synthesis and characterization of porous interpenetrated zirconium-organic frameworks (PIZOFs), a new family of metal-organic frameworks obtained from ZrCl(4) and the rodlike dicarboxylic acids HO(2)C[PE-P(R(1),R(2))-EP]CO(2) H that consist of alternating phenylene (P) and ethynylene (E) units. The substituents R(1),R(2) were broadly varied (alkyl, O-alkyl, oligo(ethylene glycol)), including postsynthetically addressable substituents (amino, alkyne, furan). The PIZOF structure is highly tolerant towards the variation of R(1) and R(2). This together with the modular synthesis of the diacids offers a facile tuning of the chemical environment within the pores. The PIZOF structure was solved from single-crystal X-ray diffraction analysis. The PIZOFs are stable under ambient conditions. PIZOF-2, the PIZOF prepared from HO(2)C[PE-P(OMe,OMe)-EP]CO(2)H, served as a prototype to determine thermal stability and porosity. It is stable up to 325 °C in air as determined by using thermogravimetry and powder X-ray diffraction. Argon sorption isotherms on PIZOF-2 revealed a Brunauer-Emmett-Teller (BET) surface area of 1250 m(2) g(-1) and a total pore volume of 0.68 cm(3) g(-1).     

Hydrogen storage in microporous metal-organic frameworks with exposed metal sites

Owing to their high uptake capacity at low temperature and excellent reversibility kinetics, metal-organic frameworks have attracted considerable attention as potential solid-state hydrogen storage materials. In the last few years, researchers have also identified several strategies for increasing the affinity of these materials towards hydrogen, among which the binding of H(2) to unsaturated metal centers is one of the most promising. Herein, we review the synthetic approaches employed thus far for producing frameworks with exposed metal sites, and summarize the hydrogen uptake capacities and binding energies in these materials. In addition, results from experiments that were used to probe independently the metal-hydrogen interaction in selected materials will be discussed.     

Elucidating gating effects for hydrogen sorption in MFU-4-type triazolate-based metal-organic frameworks featuring different pore sizes

A highly porous member of isoreticular MFU‐4‐type frameworks, [Zn₅Cl₄(BTDD)₃] (MFU‐4l(arge)) (H₂‐BTDD=bis(1H‐1,2,3‐triazolo[4,5‐b],[4′,5′‐i])dibenzo[1,4]dioxin), has been synthesized using ZnCl₂ and H₂‐BTDD in N,N‐dimethylformamide as a solvent. MFU‐4l represents the first example of MFU‐4‐type frameworks featuring large pore apertures of 9.1 Å. Here, MFU‐4l serves as a reference compound to evaluate the origin of unique and specific gas‐sorption properties of MFU‐4, reported previously. The latter framework features narrow‐sized pores of 2.5 Å that allow passage of sufficiently small molecules only (such as hydrogen or water), whereas molecules with larger kinetic diameters (e.g., argon or nitrogen) are excluded from uptake. The crystal structure of MFU‐4l has been solved ab initio by direct methods from 3D electron‐diffraction data acquired from a single nanosized crystal through automated electron diffraction tomography (ADT) in combination with electron‐beam precession. Independently, it has been solved using powder X‐ray diffraction. Thermogravimetric analysis (TGA) and variable‐temperature X‐ray powder diffraction (XRPD) experiments carried out on MFU‐4l indicate that it is stable up to 500 °C (N₂ atmosphere) and up to 350 °C in air. The framework adsorbs 4 wt % hydrogen at 20 bar and 77 K, which is twice the amount compared to MFU‐4. The isosteric heat of adsorption starts for low surface coverage at 5 kJ mol^?1 and decreases to 3.5 kJ mol^?1 at higher H₂ uptake. In contrast, MFU‐4 possesses a nearly constant isosteric heat of adsorption of ca. 7 kJ mol^?1 over a wide range of surface coverage. Moreover, MFU‐4 exhibits a H₂ desorption maximum at 71 K, which is the highest temperature ever measured for hydrogen physisorbed on metal–organic frameworks (MOFs).     

Benzene-templated hydrothermal synthesis of metal-organic frameworks with selective sorption properties

In this paper, we report two metal-organic frameworks [Co3(ndc)3(bipyen)(1.5)]H2O (1) and [Co2(ndc)2bipyen)]C6H6.H2O (2) (bipyen=trans-1,2-bis(4-pyridyl)ethylene, H2ndc=2,6-naphthalenedicarboxylic acid). These compounds were both synthesized from identical hydrothermal reaction conditions except that benzene was added to the reaction for 2. Crystal structures show that the two compounds have triply interpenetrated three-dimensional frameworks and these frameworks have the same primary structure of a two-dimensional network of interconnected [Co2(O2CR)(4/2)] (R=naphthalene group) paddle-wheels and bridging bipyen ligands. Both compounds have guest water molecules and, in addition, 2 has guest benzene molecules. Structural transformations of the host accompanied guest removal, which can be monitored by powder X-ray diffraction. N2 adsorption data of 2 show that there are two different types of pores corresponding to the benzene and water pores. Upon exposure to vapors of several organic molecules, the heat-treated sample of 2 adsorbs benzene and cyclohexene, but does not adsorb toluene, (o-, m-, and p-)xylenes, cycloheptatriene, or cyclohexane.