Toward a less costly but accurate calculation of the CCSD(T)/CBS noncovalent interaction energy

The popular method of calculating the noncovalent interaction energies at the coupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] theory level in the complete basis set (CBS) limit was to add a CCSD(T) correction term to the CBS second-order Møller-Plesset perturbation theory (MP2). The CCSD(T) correction term is the difference between the CCSD(T) and MP2 interaction energies evaluated in a medium basis set. However, the CCSD(T) calculations with the medium basis sets are still very expensive for systems with more than 30 atoms. Comparatively, the domain-based local pair natural orbital coupled-cluster method [DLPNO-CCSD(T)] can be applied to large systems with over 1,000 atoms. Considering both the computational accuracy and efficiency, in this work, we propose a new scheme to calculate the CCSD(T)/CBS interaction energies. In this scheme, the MP2/CBS term keeps intact and the CCSD(T) correction term is replaced by a DLPNO-CCSD(T) correction term which is the difference between the DLPNO-CCSD(T) and DLPNO-MP2 interaction energies evaluated in a medium basis set. The interaction energies of the noncovalent systems in the S22, HSG, HBC6, NBC10, and S66 databases were recalculated employing this new scheme. The consistent and tight settings of the truncation parameters for DLPNO-CCSD(T) and DLPNO-MP2 in this noncanonical CCSD(T)/CBS calculations lead to the maximum absolute deviation and root-mean-square deviation from the canonical CCSD(T)/CBS interaction energies of less than or equal to 0.28 kcal/mol and 0.09 kcal/mol, respectively. The high accuracy and low cost of this new computational scheme make it an excellent candidate for the study of large noncovalent systems.     

New accurate benchmark energies for large water clusters: DFT is better than expected

In this work, we use MP2 and coupled‐cluster with single, double, and perturbative triple excitations [CCSD(T)] as well as their corresponding explicitly correlated (F12) counterparts to compute the interaction energies of water icosamers. The incremental scheme is used to compute benchmark energies at the CCSD(T)/CBS(45) and CCSD(T)(F12*)/cc‐pVQZ‐F12 level of theory. The four structures, dodecahedron, edge sharing, face sharing, and fused cubes, are part of the WATER27 test set and therefore, highly accurate interaction energies are required. All methods applied in this work lead to new benchmark energies for these four systems. To obtain these values, we carefully analyze the convergence of the interaction energies with respect to the basis set. Furthermore, we investigate the influence of the basis set superposition error and the core‐valence correlation. The interaction energies are: dodecahedron ?198.6 kcal/mol, edge sharing ?209.7 kcal/mol, face sharing ?208.0 kcal/mol, and fused cubes ?208.0 kcal/mol. For water clusters, we recommend to use the PW6B95 density functional of Truhlar in combination with Grimme's dispersion correction (D3), as the mean absolute error is 0.9 and the root mean‐squared deviation is only 1.4 kcal/mol. © 2014 Wiley Periodicals, Inc.     

Stabilisation energy of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, I, CN) complexes: complete basis set limit calculations at MP2 and CCSD(T) levels

Stabilisation energies of stacked structures of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, CN) complexes were determined at the CCSD(T) complete basis set (CBS) limit level. These energies were constructed from MP2/CBS stabilisation energies and a CCSD(T) correction term determined with a medium basis set (6-31G**). The former energies were extrapolated using the two-point formula of Helgaker et al. from aug-cc-pVDZ and aug-cc-pVTZ Hartree-Fock energies and MP2 correlation energies. The CCSD(T) correction term is systematically repulsive. The final CCSD(T)/CBS stabilisation energies are large, considerably larger than previously calculated and increase in the series as follows: hexafluorobenzene (6.3 kcal mol(-1)), hexachlorobenzene (8.8 kcal mol(-1)), hexabromobenzene (8.1 kcal mol(-1)) and hexacyanobenzene (11.0 kcal mol(-1)). MP2/SDD** relativistic calculations performed for all complexes mentioned and also for benzene[dot dot dot]hexaiodobenzene have clearly shown that due to relativistic effects the stabilisation energy of the hexaiodobenzene complex is lower than that of hexabromobenzene complex. The decomposition of the total interaction energy to physically defined energy components was made by using the symmetry adapted perturbation treatment (SAPT). The main stabilisation contribution for all complexes investigated is due to London dispersion energy, with the induction term being smaller. Electrostatic and induction terms which are attractive are compensated by their exchange counterparts. The stacked motif in the complexes studied is very stable and might thus be valuable as a supramolecular synthon.     

Probing the effects of heterogeneity on delocalized pi...pi interaction energies

Dimers composed of benzene (Bz), 1,3,5-triazine (Tz), cyanogen (Cy) and diacetylene (Di) are used to examine the effects of heterogeneity at the molecular level and at the cluster level on pi...pi stacking energies. The MP2 complete basis set (CBS) limits for the interaction energies (E(int)) of these model systems were determined with extrapolation techniques designed for correlation consistent basis sets. CCSD(T) calculations were used to correct for higher-order correlation effects (deltaE(CCSD)(T)(MP2)) which were as large as +2.81 kcal mol(-1). The introduction of nitrogen atoms into the parallel-slipped dimers of the aforementioned molecules causes significant changes to E(int). The CCSD(T)/CBS E(int) for Di-Cy is -2.47 kcal mol(-1) which is substantially larger than either Cy-Cy (-1.69 kcal mol(-1)) or Di-Di (-1.42 kcal mol(-1)). Similarly, the heteroaromatic Bz-Tz dimer has an E(int) of -3.75 kcal mol(-1) which is much larger than either Tz-Tz (-3.03 kcal mol(-1)) or Bz-Bz (-2.78 kcal mol(-1)). Symmetry-adapted perturbation theory calculations reveal a correlation between the electrostatic component of E(int) and the large increase in the interaction energy for the mixed dimers. However, all components (exchange, induction, dispersion) must be considered to rationalize the observed trend. Another significant conclusion of this work is that basis-set superposition error has a negligible impact on the popular deltaE(CCSD)(T)(MP2) correction, which indicates that counterpoise corrections are not necessary when computing higher-order correlation effects on E(int). Spin-component-scaled MP2 (SCS-MP2 and SCSN-MP2) calculations with a correlation-consistent triple-zeta basis set reproduce the trends in the interaction energies despite overestimating the CCSD(T)/CBS E(int) of Bz-Tz by 20-30%.     

Semi-empirical molecular orbital methods including dispersion corrections for the accurate prediction of the full range of intermolecular interactions in biomolecules

Semi-empirical calculations including an empirical dispersive correction are used to calculate intermolecular interaction energies and structures for a large database containing 156 biologically relevant molecules (hydrogen-bonded DNA base pairs, interstrand base pairs, stacked base pairs and amino acid base pairs) for which MP2 and CCSD(T) complete basis set (CBS) limit estimates of the interaction energies are available. The dispersion corrected semi-empirical methods are parameterised against a small training set of 22 complexes having a range of biologically important non-covalent interactions. For the full molecule set (156 complexes), compared to the high-level ab initio database, the mean unsigned errors of the interaction energies at the corrected semi-empirical level are 1.1 (AM1-D) and 1.2 (PM3-D) kcal mol(-1), being a significant improvement over existing AM1 and PM3 methods (8.6 and 8.2 kcal mol(-1)). Importantly, the new semi-empirical methods are capable of describing the diverse range of biological interactions, most notably stacking interactions, which are poorly described by both current AM1 and PM3 methods and by many DFT functionals. The new methods require no more computer time than existing semi-empirical methods and therefore represent an important advance in the study of important biological interactions.     

Performance of dispersion-corrected density functional theory for the interactions in ionic liquids

Potential energy curves for the dissociation of cation-anion associates representing the building units of ionic liquids have been computed with dispersion corrected DFT methods. Non-local van der Waals density functionals (DFT-NL) for the first time as well as an atom pair-wise correction method (DFT-D3) have been tested. Reference data have been computed at the extrapolated MP2/CBS and estimated CCSD(T)/CBS levels of theory. The investigated systems are combined from two cations (1-butyl-3-methylimidazolium and tributyl(methyl)posphonium) and three anions (chloride, dicyanamide, acetate). We find substantial stabilization from London dispersion energy near equilibrium of 5-7 kcal mol(-1) (about 5-6% of the interaction energy). Equilibrium distances are shortened by 0.03-0.09 ? and fundamental (inter-fragment) vibrational frequencies (which are in the range 140-180 cm(-1)) are increased by typically 10 cm(-1) when dispersion corrections are made. The dispersion-corrected hybrid functional potentials are in general in excellent agreement with the corresponding CCSD(T) reference data (typical deviations of about 1-2%). The DFT-D3 method performs unexpectedly well presumably because of cancellation of errors between the dispersion coefficients of the cations and anions. Due to self-interaction error, semi-local density functionals exhibit severe SCF convergence problems, and provide artificial charge-transfer and inaccurate interaction energies for larger inter-fragment distances. Although these problems may be alleviated in condensed phase simulations by effective Coulomb screening, only dispersion-corrected hybrid functionals with larger amounts of Fock-exchange can in general be recommended for such ionic systems.     

Reliable predictions of the thermochemistry of boron-nitrogen hydrogen storage compounds: BxNxHy, x = 2, 3

Thermochemical data calculated using ab initio molecular orbital theory are reported for 16 BxNxHy compounds with x = 2, 3 and y > or = 2x. Accurate gas-phase heats of formation were obtained using coupled cluster with single and double excitations and perturbative triples (CCSD(T)) valence electron calculations extrapolated to the complete basis set (CBS) limit with additional corrections including core/valence, scalar relativistic, and spin-orbit corrections to predict the atomization energies and scaled harmonic frequencies to correct for zero point and thermal energies and estimate entropies. Computationally cheaper calculations were also performed using the G3MP2 and G3B3 variants of the Gaussian 03 method, as well as density functional theory (DFT) using the B3LYP functional. The G3MP2 heats of formation are too positive by up to approximately 6 kcal/mol as compared with CCSD(T)/CBS values. The more expensive G3B3 method predicts heats of formation that are too negative as compared with the CCSD(T)/CBS values by up to 3-4 kcal/mol. DFT using the B3LYP functional and 6-311+G** basis set predict isodesmic reaction energies to within a few kcal/mol compared with the CCSD(T)/CBS method so isodesmic reactions involving BN compounds and the analogous hydrocarbons can be used to estimate heats of formation. Heats of formation of c-B3N3H12 and c-B3N3H6 are -95.5 and -115.5 kcal/mol at 298 K, respectively, using our best calculated CCSD(T)/CBS approach. The experimental value for c-B3N3H6 appears to be approximately 7 kcal/mol too negative. Enthalpies, entropies, and free energies are calculated for many dehydrocoupling and dehydrogenation reactions that convert BNH6 to alicyclic and cyclic oligomers and H2(g). Generally, the reactions are highly exothermic and exergonic as well because of the release of 1 or more equivalents of H2(g). For c-B3N3H12 and c-B3N3H6, available experimental data for sublimation and vaporization lead to estimates of their condensed phase 298 K heats of formation: DeltaHf degrees [c-B3N3H12(s)] = -124 kcal/mol and DeltaHf degrees [c-B3N3H6(l)] = -123 kcal/mol. The reaction thermochemistries for the dehydrocoupling of BNH6(s) to c-B3N3H12(s) and the dehydrogenation of c-B3N3H12(s) to c-B3N3H6(l) are much less exothermic compared with the gas-phase reactions due to intermolecular forces which decrease in the order BNH6 > cyclo-B3N3H12 > cyclo-B3N3H6. The condensed phase reaction free energies are less negative compared with the gas-phase reactions but are still too favorable for BNH6 to be regenerated from either c-B3N3H12 or c-B3N3H6 by just an overpressure of H2.     

Model of peptide bond-aromatic ring interaction: correlated ab initio quantum chemical study

Aromatic ring-peptide bond interactions (modeled as benzene and formamide, N-methylformamide and N-methylacetamide) are studied by means of advanced computational chemistry methods: second-order M?ller-Plesset (MP2), coupled-cluster single and double excitation model [CCSD(T)], and density functional theory with dispersion (DFT-D). The geometrical preferences of these interactions as well as their interaction energy content, in both parallel and T-shaped arrangements, are investigated. The stabilization energy reaches a value of over 5 kcal/mol for the N-methylformamide-benzene complex at the CCSD(T)/complete basis set (CBS) level. Decomposition of interaction energy by the DFT-symmetry-adapted perturbation treatment (SAPT) technique shows that the parallel and T-shaped arrangements, although similar in their total interaction energies, differ significantly in the proportion of electrostatic and dispersion terms.     

High-level ab initio computations of structures and interaction energies of naphthalene dimers: origin of attraction and its directionality

The intermolecular interaction energies of naphthalene dimers have been calculated by using an aromatic intermolecular interaction model (a model chemistry for the evaluation of intermolecular interactions between aromatic molecules). The CCSD(T) (coupled cluster calculations with single and double substitutions with noniterative triple excitations) interaction energy at the basis set limit has been estimated from the second-order M?ller-Plesset perturbation interaction energy near saturation and the CCSD(T) correction term obtained using a medium-size basis set. The estimated interaction energies of the set of geometries explored in this work show that two structures emerge as being the lowest energy, and may effectively be considered as isoenergetic on the basis of the errors inherent in out extrapolation procedure. These structures are the slipped-parallel (Ci) structure (-5.73 kcal/mol) and the cross (D2d) structure (-5.28 kcal/mol). The T-shaped (C2v) and sandwich (D2h) dimers are substantially less stable (-4.34 and -3.78 kcal/mol, respectively). The dispersion interaction is found to be the major source of attraction in the naphthalene dimer. The electrostatic interaction is substantially smaller than the dispersion interaction. The large dispersion interaction is the cause of the large binding energies of the cross and slipped-parallel dimers.     

Comparison of the performance of dispersion-corrected density functional theory for weak hydrogen bonds

Potential energy curves for five complexes with weak to medium strong hydrogen bonds have been computed with dispersion corrected DFT methods. The electronic density based vdW-DF2 and VV10 van der Waals density functionals have been tested, as well as an atom pair-wise correction method (DFT-D3). The short-range exchange-correlation components BLYP and rPW86-PBE together with the extended aug-cc-pVQZ basis sets have been employed. Reference data have been computed at the estimated CCSD(T)/CBS(aQ-a5) level of theory. The investigated systems are CH(4)·NH(3), Cl(3)CH·NH(3), NH(3)·NH(3), CH(3)F·C(2)H(2) and CH(3)F·H(2)O with binding energies ranging from -0.7 kcal mol(-1) to -5.5 kcal mol(-1). We find that all dispersion corrected methods perform reasonably well for these hydrogen bonds, but also observe distinct differences. The BLYP-D3 method provides the best results for three out of five systems. For the fluorinated complexes, the VV10 method gives remarkably good results. The vdW-DF2 method yields good interaction energies similar to the other methods (mean average deviation of 0.2-0.3 kcal mol(-1)), but fails to provide accurate equilibrium separations. Based on these results and previous experience with the computation of non-covalent interactions, for large-scale applications we can recommend DFT-D3 based structure optimizations with subsequent checking of interaction energies by single-point VV10 computations. Comparison of the DFT-D3 and VV10 results leads to the conclusion that the short-range exchange-correlation functional and not the dispersion correction mainly determines the achievable accuracy.     

Performance of spin-component-scaled Møller-Plesset theory (SCS-MP2) for potential energy curves of noncovalent interactions

An examination of the performance of density-fitted, spin-component-scaled, second-order M?ller-Plesset theory (SCS-MP2), SCS-MP2 with parameters optimized for nucleic acids (SCSN-MP2), and their local-correlation variants, SCS-LMP2 and SCSN-LMP2, is presented for the sandwich and T-shaped benzene dimers, the methane-benzene and H(2)S-benzene complexes, and the methane dimer over entire potential energy curves. These are compared to benchmark-quality estimates of the complete-basis-set limit for coupled-cluster theory through perturbative triple excitations, CCSD(T)/CBS. With the exception of the methane dimer, SCSN-LMP2/CBS tends to outperform SCS-LMP2/CBS with maximum relative errors of 6 and 18%, respectively, at the optimal CCSD(T)/CBS intermolecular distances. For the methane dimer, errors for SCS(N)-(L)MP2/CBS remain in the 0.2-0.3 kcal mol(-1) range, corresponding to a larger relative error of 40-50%. Although the local MP2 methods perform very similarly to their conventional counterparts when aug-cc-pVTZ or larger basis sets are used, in the absence of counterpoise correction the local approximation becomes significantly worse for the aug-cc-pVDZ basis set. The changes due to local correlation approximations for the aug-cc-pVDZ basis are reduced when diffuse functions are neglected for hydrogen atoms.     

Toward true DNA base-stacking energies: MP2, CCSD(T), and complete basis set calculations

Stacking energies in low-energy geometries of pyrimidine, uracil, cytosine, and guanine homodimers were determined by the MP2 and CCSD(T) calculations utilizing a wide range of split-valence, correlation-consistent, and bond-functions basis sets. Complete basis set MP2 (CBS MP2) stacking energies extrapolated using aug-cc-pVXZ (X = D, T, and for pyrimidine dimer Q) basis sets equal to -5.3, -12.3, and -11.2 kcal/mol for the first three dimers, respectively. Higher-order correlation corrections estimated as the difference between MP2 and CCSD(T) stacking energies amount to 2.0, 0.7, and 0.9 kcal/mol and lead to final estimates of the genuine stacking energies for the three dimers of -3.4, -11.6, and -10.4 kcal/mol. The CBS MP2 stacking-energy estimate for guanine dimer (-14.8 kcal/mol) was based on the 6-31G(0.25) and aug-cc-pVDZ calculations. This simplified extrapolation can be routinely used with a meaningful accuracy around 1 kcal/mol for large aromatic stacking clusters. The final estimate of the guanine stacking energy after the CCSD(T) correction amounts to -12.9 kcal/mol. The MP2/6-31G(0.25) method previously used as the standard level to calculate aromatic stacking in hundreds of geometries of nucleobase dimers systematically underestimates the base stacking by ca. 1.0-2.5 kcal/mol per stacked dimer, covering 75-90% of the intermolecular correlation stabilization. We suggest that this correction is to be considered in calibration of force fields and other cheaper computational methods. The quality of the MP2/6-31G(0.25) predictions is nevertheless considerably better than suggested on the basis of monomer polarizability calculations. Fast and very accurate estimates of the MP2 aromatic stacking energies can be achieved using the RI-MP2 method. The CBS MP2 calculations and the CCSD(T) correction, when taken together, bring only marginal changes to the relative stability of H-bonded and stacked base pairs, with a slight shift of ca. 1 kcal/mol in favor of H-bonding. We suggest that the present values are very close to ultimate predictions of the strength of aromatic base stacking of DNA and RNA bases.     

Dispersion interactions of carbohydrates with condensate aromatic moieties: theoretical study on the CH-π interaction additive properties

In this article we present the first systematic study of the additive properties (i.e. degree of additivity) of the carbohydrate-aromatic moiety CH-π dispersion interaction. The additive properties were studied on the β-D-glucopyranose, β-D-mannopyranose and α-L-fucopyranose complexes with the naphthalene molecule by comparing the monodentate (single CH-π) and bidentate (two CH-π) complexes. All model complexes were optimized using the DFT-D approach, at the BP/def2-TZVPP level of theory. The interaction energies were refined using single point calculations at highly correlated ab initio methods at the CCSD(T)/CBS level, calculated as E + (E(CCSD(T))-E(MP2))(Small Basis). Bidentate complexes show very strong interactions in the range from -10.79 up to -7.15 and -8.20 up to -6.14 kcal mol(-1) for the DFT-D and CCSD(T)/CBS level, respectively. These values were compared with the sum of interaction energies of the appropriate monodentate carbohydrate-naphthalene complexes. The comparison reveals that the bidentate complex interaction energy is higher (interaction is weaker) than the sum of monodentate complex interaction energies. Bidentate complex interaction energy corresponds to 2/3 of the sum of the appropriate monodentate complex interaction energies (averaging over all modeled carbohydrate complexes). The observed interaction energies were also compared with the sum of interaction energies of the corresponding previously published carbohydrate-benzene complexes. Also in this case the interaction energy of the bidentate complex was higher (i.e. weaker interaction) than the sum of interaction energies of the corresponding benzene complexes. However, the obtained difference is lower than before, while the bidentate complex interaction energy corresponds to 4/5 of the sum of interaction energy of the benzene complexes, averaged over all structures. The mentioned comparison might aid protein engineering efforts where amino acid residues phenylalanine or tyrosine are to be replaced by a tryptophan and can help to predict the changes in the interactions. The observed results also show that DFT-D correctly describes the CH-π interaction energy and their additive properties in comparison to CCSD(T)/CBS calculated interaction energies. Thus, the DFT-D approach might be used for calculation of larger complexes of biological interest, where dispersion interaction plays an important role.     

Accurate Interaction Energies of CO2 with the 20 Naturally Occurring Amino Acids

We have performed a series of highly accurate calculations between CO₂ and the 20 naturally occurring amino acids for the investigation of the attractive noncovalent interactions. Different nucleophilic groups present in the amino acid structures were considered (α-NH₂, COOH, side groups), and the stronger binding sites were identified. A database of accurate reference interactions energies was compiled as computed by explicitly-correlated coupled-cluster singles-and-doubles, together with perturbative triples extrapolated to the complete-basis-set limit. The CCSD(F12)(T)/CBS reference values were used for comparing a variety of popular density functionals with different basis sets. Our results show that most density functionals with the triple-zeta basis set def2-TZVPP align with the CCSD(F12)(T)/CBS reference values, but errors range from 0.1 kcal/mol up to 1.0 kcal/mol.     

Application of a semi-empirical dispersion correction for modeling water clusters

The Grimme-D3 semi-empirical dispersion energy correction has been implemented for the original effective fragment potential for water (EFP1), and for systems that contain water molecules described by both correlated ab initio quantum mechanical (QM) molecules and EFP1. Binding energies obtained with these EFP1-D and QM/EFP1-D methods were tested using 27 benchmark species, including neutral, protonated, deprotonated, and auto-ionized water clusters and nine solute–water binary complexes. The EFP1-D and QM/EFP1-D binding energies are compared with those obtained using fully QM methods: second-order perturbation theory, and coupled cluster theory, CCSD(T), at the complete basis set (CBS) limit. The results show that the EFP1-D and QM/EFP1-D binding energies are in good agreement with CCSD(T)/CBS binding energies with a mean absolute error of 5.9 kcal/mol for water clusters and 0.8 kcal/mol for solute–water binary complexes. © 2018 Wiley Periodicals, Inc.     

Halogen bonds with benzene: An assessment of DFT functionals

The performance of an extensive set of density functional theory functionals has been tested against CCSD(T) and MP2 results, extrapolated to the complete basis set (CBS) limit, for the interaction of either DCl or DBr (D = H, HCC, F, and NC) with the aromatic system of benzene. It was found that double hybrid functionals explicitly including dispersion, that is, B2PLYPD and mPW2PLYPD, provide the better agreement with the CCSD(T)/CBS results on both energies and equilibrium geometry, indicating the importance of dispersive contributions in determining this interaction. Among the less expensive functionals, the better performance is provided by the ωB97X and M062X functionals, while the ωB97XD and B97D functionals are shown to work very well for bromine complexes but not so well for chlorine complexes. © 2013 Wiley Periodicals, Inc.     

Reliable structures and energetics for two new delocalized pi...pi prototypes: cyanogen dimer and diacetylene dimer

Two new prototype delocalized pi[dot dot dot]pi complexes are introduced: the dimers of cyanogen, (N[triple bond]C-C[triple bond]N)(2), and diacetylene, (HC[triple bond]C-C[triple bond]CH)(2). These dimers have properties similar to larger delocalized pi...pi systems such as benzene dimer but are small enough that they can be probed in far greater detail with high accuracy electronic structure methods. Parallel-slipped and T-shaped structures of both cyanogen dimer and diacetylene dimer have been optimized with 15 different procedures. The effects of basis set size, theoretical method, counterpoise correction, and the rigid monomer approximation on the structure and energetics of each dimer have been examined. MP2 and CCSD(T) optimized geometries for all four dimer structures are reported, as well as estimates of the CCSD(T) complete basis set (CBS) interaction energy for every optimized geometry. The data reported here suggest that future optimizations of delocalized pi[dot dot dot]pi clusters should be carried out with basis sets of triple-zeta quality. Larger basis sets and the expensive counterpoise correction to the molecular geometry are not necessary. The rigid monomer approximation has very little effect on structure and energetics of these dimers and may be used without consequence. Due to a consistent cancellation of errors, optimization with the MP2 method leads to CCSD(T)/CBS interaction energies that are within 0.2 kcal mol(-1) of those for structures optimized with the CCSD(T) method. Future studies that aim to resolve structures separated by a few tenths of a kcal mol(-1) should consider the effects of optimization with the CCSD(T) method.     

Ab initio calculations on halogen-bonded complexes and comparison with density functional methods

A systematic theoretical investigation on a series of dimeric complexes formed between some halocarbon molecules and electron donors has been carried out by employing both ab initio and density functional methods. Full geometry optimizations are performed at the Moller-Plesset second-order perturbation (MP2) level of theory with the Dunning's correlation-consistent basis set, aug-cc-pVDZ. Binding energies are extrapolated to the complete basis set (CBS) limit by means of two most commonly used extrapolation methods and the aug-cc-pVXZ (X = D, T, Q) basis sets series. The coupled cluster with single, double, and noniterative triple excitations [CCSD(T)] correction term, determined as a difference between CCSD(T) and MP2 binding energies, is estimated with the aug-cc-pVDZ basis set. In general, the inclusion of higher-order electron correlation effects leads to a repulsive correction with respect to those predicted at the MP2 level. The calculations described herein have shown that the CCSD(T) CBS limits yield binding energies with a range of -0.89 to -4.38 kcal/mol for the halogen-bonded complexes under study. The performance of several density functional theory (DFT) methods has been evaluated comparing the results with those obtained from MP2 and CCSD(T). It is shown that PBEKCIS, B97-1, and MPWLYP functionals provide accuracies close to the computationally very expensive ab initio methods.