5083铝合金在海水中的腐蚀电化学行为及活性氯影响研究

采用动电位极化、循环极化和全浸腐蚀试验方法,研究了5083铝合金在静止海水中的腐蚀电化学性能以及活性氯的影响.结果表明,在本文设置的防污活性氯浓度范围(0.2～0.5mg/L)内,活性氯对铝合金的阴极和阳极电化学极化以及腐蚀行为没有明显影响,并可提高铝合金的耐点蚀能力,海水的pH值对铝合金的腐蚀具有显著的影响.该研究为海水中5083铝合金的防腐防污提供了依据.     

海水超级电容溶解氧电池

以氧化处理的碳纤维刷（Carbon fibre brush,CFB）作阴极材料,提出海水超级电容溶解氧电池（Seawater battery with electrochemical capacitance, SWB-EC）概念,并制造了3台联用实海测试样机. 分别由循环伏安和稳态恒流放电方法研究了氧化处理前后的CFB和镁合金牺牲阳极的放电性能. 结果表明：氧化处理的CFB具有准电容特性,在动态海水中其氧阴极还原反应（Oxygen reduction reaction, ORR）活性比未处理的CFB有大幅度提高;镁合金牺牲阳极的开路电位为-1.74 V,工作电位高,溶解较均匀. 用以上阴、阳极材料制成3台联用样机作连续实海放电测试,经运行2个月,相关实验数据分析表明：与商品化海水电池SWB1200初步相比,该海水超级电容溶解氧电池具有更高的体积比功率密度.     

渗铝钢在海水中的电化学行为研究

应用化学浸泡实验,电化学测试技术研究渗铝钢在海水中的电化学行为.试验表明,在海水中渗铝钢的腐蚀电位比20#钢的负,其阳极活性大于后者,在低电位下发生阳极溶解.20#钢和渗铝钢的腐蚀速率分别为5.80mg/dm2·d和3.36mg/dm2·d.渗铝钢在海水中具有优良的耐蚀性能是由于环境遮断和电偶保护的综合效果.其腐蚀产物含有氯离子,说明氯离子参与海水中的腐蚀过程,是导致腐蚀的主要原因.渗铝钢除了表层形成的Al、Fe化合物和致密、连续、具有高效防护作用Al的氧化物保护膜外,Al Fe合金层起到牺牲阳极的电化学保护作用.     

混合金属氧化物阳极在海水中的电化学性能

采用热分解方法制备钛基混合金属氧化物阳极 ,用扫描电镜对阳极涂层显微形貌进行了分析 ,并通过实海模拟试验考察了混合金属氧化物阳极在海水阴极保护系统中的使用性能 .SEM分析结果表明 ,混合金属氧化物阳极涂层呈多孔多裂纹的显微结构 ,与其它阳极材料相比 ,此种阳极具有更大的活性表面积 .电化学试验结果表明 ,混合金属氧化物阳极在海水中具有良好的电化学稳定性和电化学活性 ;此外 ,混合金属氧化物阳极在海水中的消耗率很低 ,属于不溶性的阳极材料 ,作为外加电流阴极保护的辅助阳极具有广泛的应用前景     

边界元方法计算牺牲阳极的接水电阻

本文在建立了阴极保护电位场数学模型的基础上，以边界元方法模拟牺牲阳极与低碳钢直接偶合时牺牲阳极的工作状态。     

喷砂-阳极氧化-氟化处理构筑铝合金超疏水表面

为研究复合法制备超疏水表面过程中主要工艺参数对表面形貌及超疏水性能的影响, 开发了一种喷砂-阳极氧化复合方法, 在铝合金表面构筑了微米-纳米二级结构, 经氟化处理后获得了超疏水特性. 结果表明, 喷砂处理在铝合金表面通过冲蚀的凹坑构筑出微米结构, 阳极氧化则在铝合金表面通过蜂窝状氧化膜构筑纳米结构. 但单纯构筑粗糙结构或单纯改变表面化学组成均不能在铝合金表面获得超疏水特性. 单纯的微米结构或纳米结构, 即使有低表面能聚合物修饰也不能获得超疏水特性. 只有微米-纳米二级结构和低表面能聚合物的协同作用, 才能有效构筑铝合金超疏水表面. 这种铝合金与水滴接触时, 形成的气阱可减小固体表面与水滴的接触面积, 降低表面与水滴间的热量交换, 从而减缓水分子的凝结, 提高铝合金的抗霜冻性. 同时, 气阱还可有效减缓海水的腐蚀, 提高铝合金的耐海水腐蚀性.     

铈对多孔锂铝合金阳极的影响

研究了含多孔锂铝合金阳极的制备方法,讨论了对多孔锂铝合金阳极物理机械性能的影响,测试了含铈多孔锂铝合金阳极的充放电性能。实验结果显示,,采用ＮａＣｌ为成孔物质以１００－１５０ＭＰａ压力成型和５５０－５７０℃温度烧结,可以获得性能理想的多孔孔铝;以多孔铝为基体,用电化学方法合成的含０．５％－１．５％铈多孔β－锂铝合金阳极具有理想的充放电性能。     

铱钽钛金属氧化物阳极的电化学特性

采用热分解方法在钛基体上制备铱钽钛金属氧化物阳极 ,用扫描电镜对阳极涂层显微形貌进行分析 ,通过强化电解寿命试验、开路电位测试、消耗率试验及循环伏安曲线研究了金属氧化物阳极的电化学性能 .SEM分析结果表明铱钽钛金属氧化物阳极涂层呈现多孔多裂纹形貌结构 .随阳极涂层组成不同 ,涂层显微形貌表现出很大差异 ,这种差异直接影响阳极电化学性能 .电化学性能试验结果表明铱钽钛金属氧化物阳极在酸性介质和海水中具有良好的电化学稳定性和电化学活性 .此外 ,铱钽钛金属氧化物阳极在海水中的消耗率很低 ,属于不溶性的阳极材料 ,作为外加电流阴极保护用辅助阳极具有广泛的应用前景 .     

热水器用AZ31B型镁合金牺牲阳极挤压棒电化学性能测试研究

采用ICP-AES法、电化学性能14 d测试法测定热水器用镁合金牺牲阳极棒中的合金元素含量、开路电位、闭路电位、实际电容量、电流效率等参数，通过金相显微镜、扫描电镜-X射线能谱分析仪表征腐蚀表面结构。结果表明：镁合金牺牲阳极中合金元素Al、Zn、Mn含量分别为2.887%、0.849%、0.669%,开路电位、闭路电位、实际电容量与电流效率分别为-1.629 5 V、-1.537 5 V、1 327.6 A·h/kg、60.4%,分析测试值均符合GB/T17731-2015规范要求；合金晶粒清晰可见，晶界分明，表面腐蚀较为均匀，表明AZ31B型镁合金牺牲阳极材质结构性能较好。     

稀土元素镧对锌阳极带电化学性能的影响

研究了镧的加入对牺牲锌阳极带电化学性能的影响。结果表明，稀土元素镧对锌阳极带的电位和电流效率影响很小，实验结果符合相关标准。证明在纯锌中添加微量稀土元素镧改善锌阳极带机械性能，同时保持必要的电化学性能的工艺方法是有效、可行的。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.