Synthese von Plectranthonen,diterpenoiden Phenanthren-1,4-chinonen

Synthesis of Plectranthons, Diterpenoid Phenanthrene-1,4-diones The following phenanthrene-1,4-diones have been synthesized by using the photocyclization of the corresponding highly substituted stilbenes as the key step: 3-hydroxy-5,7,8-trimethyl-2-(prop-2-enyl)phenanthrene-1,4-dione ( 1 ), (RS)-, (R)-, and (S)-2-[3-hydroxy-5,7,8-trimethyl-1,4-dioxophenanthren-2-yl]-1-methylethyl acetate ( 2 , 31 , and 32 , resp.), 3-hydroxy-7,8-dimethyl-2-(prop-2-enyl)phenanthrene-1,4-dione ( 3 ), 3-hydroxy-7,8,10-tri-methyl-2-(prop-2-enyl)phenanthrene-1,4-dione ( 4 ), 5,7,8-trimethyl-2-(prop-2-enyl)phenanthrene-1,4-dione ( 17 ), and 3-hydroxy-2-methylphenanthrene-1,4-dione ( 42 ). The quinones 1 and 3 proved to be identical with the recently isolated plectranthons A and C. Compounds 2 , 31 , and 32 exhibited the same UV/VIS, IR, ¹H-NMR and mass spectra as natural plectranthon B , but had different melting points. This might be due either to crystal modifications or to diastereoisomerism caused by the helical structure of the phenanthrene-1,4-dione skeleton. The spectral data of synthetic 4 were not compatible with those of natural plectranthon D for which structure 4 had been proposed based mainly on ¹H-NMR arguments concerning the chemical shifts of H? C(9) and H? C(10) in 1–3. Extensive ¹H-NMR investigations have now revealed that the currently stated assignments of the H? C(9)/ H? C(10) AB system have to be reversed for highly substituted phenanthrene-1,4-diones: in the model compounds 2-methylphenanthrene-1,4-dione (41) and 2, H? C(10) resonates al lower field as expected (peri-position), whereas in the highly substituted congeners 1 , 2 , 3 , 31 , and 32 , H? C(9) is shifted paramagnetically, a fact which had lead to the erroneous assignment of structure 4 for natural plectranthon D .     

Synthesis of Isotactic Polystyrene-block-Polyethylene by the Combination of Sequential Monomer Addition and Hydrogenation of 1,4-Trans-polybutadiene Block

Herein, we demonstrate the synthesis of a well-defined diblock copolymer consisting of isotactic polystyrene(iPS) and linear polyethylene, isotactic polystyrene-block-polyethylene(iPS-b-PE),by the combination ofsequential monomer addition and hydrogenation. Isospecific living polymerization of styrene and living trans-1,4-polymerization of 1,3-butadienewere catalyzed by 1,4-dithiabutandiyl-2,2′-bis(6-cumenyl-4-methylphenoxy) titanium dichloride(complex 1) activated by triisobutyl aluminum modified methylaluminoxane(MMAO) at room temperature to provide highly isotactic polystyrene(iPS) and 1,4-trans-polybutadiene(1,4-trans-PBD) with narrow molecular weight distribution. Furthermore, the iPS-b-1,4-trans-PBD was synthesized via sequential monomer addition in the presence ofcomplex 1 and MMAO.The hydrogenation of the 1,4-trans-PBD block was promoted by RuCl_2(PPh_3)_3 used as a catalyst to produce iPS-b-PE.     

Palladium-catalyzed heteroannulation leading to heterocyclic structures with two heteroatoms: a highly regio- and stereoselective synthesis of (Z)-4-alkyl-2-alkyl(aryl)idene-3,4-dihydro-2H-1,4-benzoxazines and (Z)-3-alkyl(aryl)idene-4-tosyl-3,4-dihydro-2H-1,4-benzoxazines.

A highly convenient method has been developed for the synthesis of (Z)-4-alkyl-2-alkyl(aryl)idene-3,4-dihydro-2H-1,4-benzoxazines 9 and (Z)-3-alkyl(aryl)idene-4-tosyl-3,4-dihydro-2H-1,4-benzoxazines 34-38 through palladium-copper-catalyzed reactions. Aryl halides 7 reacted with 2-[N-alkyl(benzyl)-N-prop-2'-ynyl]aminophenyl tosylate 6 in the presence of (PPh3)2PdCl2 (3 mol %), CuI(5 mol %) in triethylamine at room temperature to yield 2-[N-alkyl(benzyl)-N-(3-aryl-prop-2'-ynyl)]-aminophenyl tosylates 8 in extremely good yields (72-96%). The latter could then be cyclized with KOH in ethanol-water to Z-9 in a highly regio- and stereoselective manner. Similarly, palladium-copper-catalyzed reaction of 2-(prop-2'-ynyloxy)aniline (21) with aryl iodides 7 led to 22-26 which after tosylation and cyclization with cuprous iodide in CH3CN in the presence of K2CO3 and Bu4-NBr led to the (Z)-3-alkyl(aryl)idene-4-tosyl 3,4-dihydro-2H-1,4-benzoxazines 34-38 in good overall yields. The Z-stereochemistry of the products was established from 1H NMR spectra, 3JCH values (between vinylic proton and methylenic carbon of the heterocyclic ring), NOE experiments, and X-ray analysis. The method was also found to be suitable for the synthesis of bis(benzoxazinylated) derivatives 17, 39, and 2-alkyl-3,4-dihydro-2H-1,4-benzoxazines 18. Our method for the synthesis of 3,4-dihydro-2H-1,4-benzoxazines is highly efficacious, using easily available starting materials under very mild conditions. Also the synthesis of some novel 5-substituted uracil derivatives 40 and 41 containing the benzoxazinyl moiety and of potential biological interest is being reported.     

Homologous Mukaiyama reactions via trapping of the Nazarov intermediate with silyloxyalkenes

Treatment of 1,4-pentadien-3-ones and silyloxyalkenes with BF(3)·OEt(2) at room temperature or lower initiates a domino process consisting of sequential 4π electrocyclization and capture of the resulting cyclopentenyl cation by the electron-rich trap. The overall process furnishes 1,4-dicarbonyl products containing highly substituted cyclopentanones in good yields and with the establishment of up to five new stereocenters.     

An efficient synthesis of 6-fluoronalidixic acid and its conversion to enoxacin

1-Ethyl-6-fluoro-1,4-dihydro-7-methyl-4-oxo-1,8-naphthyridine-3-carboxylic acid ( 8 ) has been prepared in large quantities by a highly efficient process. It has in turn been degraded to give 7-chloro-1-ethyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid ( 11 ). This intermediate has been reacted with piperazine to give the known antibacterial agent, enoxacin ( 12 ).     

Synthesis of 2-(3-amino-2-oxoindolin-3-yl)-3-hydroxynaphthalene-1,4-dione derivatives via a one-pot,three-component reaction under catalyst-free conditions

A concise, facile and straightforward synthetic method has been described for the synthesis of 2-(3-amino-2-oxoindolin-3-yl)-3-hydroxynaphthalene-1,4-dione derivatives by a one-pot, three-component reaction of isatins, 2-hydroxy-1,4-naphthoquinone and ammonium acetate under catalyst-free conditions in ethanol. This protocol becomes highly efficient due to its mild reaction conditions, operational simplicity, and overall good to excellent yields (80–99%).     

Synthesis of Phenylene‐Silylene‐Vinylene Polymer and Copolymer by Ruthenium‐Catalyzed Silylative Cross‐Coupling Reaction

RuH(OAc)(CO)(PPh₃)₂ catalyzed silylative cross‐coupling polycondensation of 4‐(dimethylvinylsilyl)styrene ( 2 ) and copolycondensation of 1,4‐divinylbenzene ( 4 ) with 1,4‐bis(dimethylvinylsilyl)benzene ( 5 ) appeared to be a novel synthetic route for highly stereo‐ and regioselective synthesis of phenylene(arylene)‐silylene‐vinylene polymers.     

Enantioselective Desymmetrization of 1,4-Dihydropyridines by Oxidative NHC Catalysis

The unprecedented desymmetrization of prochiral dialdehydes catalyzed by N-heterocyclic carbenes under oxidative conditions was applied to the highly enantioselective synthesis of 1,4-dihydropyridines (DHPs) starting from 3,5-dicarbaldehyde substrates. Synthetic elaboration of the resulting 5-formyl-1,4-DHP-3-carboxylates allowed for access to the class of pharmaceutically relevant 1,4-DHP-3,5-dicarboxylates (Hantzsch esters). DFT calculations suggested that the enantioselectivity of the process is determined by the transition state involving the oxidation of the Breslow intermediate by the external quinone oxidant.     

Asymmetric desymmetrization based on an intramolecular haloetherification: a highly effective and recyclable chiral nonracemic auxiliary, 2-exo-methyl-3-endo-phenyl-5-norbornene-2-carboxaldehyde, for meso-1,3- and meso-1,4-diols

A new chiral auxiliary, a 3-endo-phenyl norbornene aldehyde derivative, which is a crystalline, very stable, and easily handled, was developed for the desymmetrization of meso-1,3- and meso-1,4-diols. The key step of the method, an intramolecular bromoetherification, proceeded in a highly diastereoselective manner. A four-step sequence, 1) acetalization, 2) intramolecular bromoetherification followed by acid hydrolysis, 3) protection of the alcohol, and 4) retrobromoetherification, transformed the meso-diols into optically active derivatives. The 3-endo-phenyl norbornene aldehyde derivative was simultaneously reformed and could be used repeatedly. This is the first chemical example of a single auxiliary that is applicable for highly enantioselective desymmetrization of meso-1,3- and meso-1,4-diols; to the best of our knowledge, this is the best chemical method available for the desymmetrization of meso-1,4-diols.     

Hydrogen-mediated C-C bond formation: catalytic regio- and stereoselective reductive condensation of alpha-keto aldehydes and 1,3-enynes

Hydrogenation of 1,3-enynes in the presence of alpha-keto aldehydes using cationic Rh(I) catalysts enables regio- and stereoselective reductive coupling to the acetylenic terminus of the enyne to afford (E)-2-hydroxy-3,5-dien-1-one products. Reductive condensation of 1-phenyl but-3-en-1-yne 1a with phenyl glyoxal 2a performed under an atmosphere of D(2) provides the product of mono-deuteration, (E)-2-hydroxy-3-deuterio-3,5-dien-1-one deuterio-3a, in 85% yield. Competition experiments involving catalytic hydrogenation of phenyl glyoxal in the presence of equimolar quantities of 1,4-diphenylbutadiene and 1,4-diphenylbut-3-en-1-yne 10a, as well as 1,4-diphenylbut-3-en-1-yne 10a and 1,4-diphenylbutadiyne, are chemoselective for coupling to the more highly unsaturated partner, suggesting a preequilibrium involving precoordination and exchange of the pi-unsaturated pronucleophiles with the catalyst prior to C-C bond formation, as well as a preference for coordination of the most pi-acidic reacting partner, as explained by the Dewar-Chatt-Duncanson model for alkyne coordination.     

Some new aspects on the chemistry of 1,4-benzoxazines

3-Methyl ( 3a ) and 3-t-butyl-1,4-2H-benzoxazine ( 3b ) were synthesized by cyclization of the appropriate acetamidoketone (Scheme 1). The former is a highly unstable molecule which rapidly converts in an intractable mixture, while the latter slowly undergoes aerial oxidation affording the hemiacetal 4. The 4H-forms of the same 3-methyl ( 6a ) and of the parent 1,4-benzoxazine ( 9 ) could be obtained as 4-acetyl derivatives. This latter, by hydrolysis, gave the cyclic trimer 10.     

Diastereoselective Manipulations of Bicyclo[m.1.0]alkane Derivatives. 4. Reactions of Nucleophiles with Bicyclo[m.1.0]alk-3-en-2-ones

Enantiomerically enriched bicyclo[m.1.0]alk-3-en-2-ones possessing 8-, 12-, and 15-membered rings were prepared and subjected to additions of nucleophiles. 1,2-Additions of n-butyllithium were highly diastereoselective for all cyclopropyl enones examined. Reactions of (Z)-bicyclo[6.1.0]non-3-en-2-one and (E)-bicyclo[13.1.0]hexadec-3-en-2-one with dimethyloxosulfonium methylide were highly diastereoselective, while reaction of (E)-bicyclo[10.1.0]tridec-3-en-2-one with this reagent was not diastereoselective. In contrast, 1,4-additions of lithium diorganocuprates were highly diastereoselective for the 8- and 12-membered enones but were not diastereoselective for the 15-membered enone. All reactions were chemically efficient. The diastereoselectivities observed for 1,2-additions, which are thought to involve early transition states, can be rationalized by consideration of the low-energy conformations of each cyclopropyl enone. The diastereoselectivities observed for 1,4-additions, which may involve late transition states, do not correlate simply with the lowest energy conformations of these enones.     

Catalytic,Regioselective 1,4-Fluorodifunctionalization of Dienes

A catalysis-based regioselective 1,4-fluorofunctionalization of trifluoromethyl substituted 1,3-dienes has been developed to access compact, highly functionalized products. The process allows E,Z-mixed dienes to be processed to a single E-alkene isomer, and leverages an inexpensive and operationally convenient I(I)/I(III) catalysis platform. The first example of catalytic 1,4-difluorination is disclosed and subsequently evolved to enable 1,4-hetero-difunctionalization, which allows δ-fluoro-alcohol and amine derivatives to be forged in a single operation. The protocol is compatible with a variety of nucleophiles including fluoride, nitriles, carboxylic acids, alcohols and even water thereby allowing highly functionalized products, with a stereocenter bearing both C(sp³)−F and C(sp³)−CF₃ groups, to be generated rapidly. Scalability (up to 3 mmol), and facile post-reaction modifications are demonstrated to underscore the utility of the method in expanding organofluorine chemical space.     

Catalytic,Regioselective 1,4-Fluorodifunctionalization of Dienes

A catalysis-based regioselective 1,4-fluorofunctionalization of trifluoromethyl substituted 1,3-dienes has been developed to access compact, highly functionalized products. The process allows E,Z-mixed dienes to be processed to a single E-alkene isomer, and leverages an inexpensive and operationally convenient I(I)/I(III) catalysis platform. The first example of catalytic 1,4-difluorination is disclosed and subsequently evolved to enable 1,4-hetero-difunctionalization, which allows δ-fluoro-alcohol and amine derivatives to be forged in a single operation. The protocol is compatible with a variety of nucleophiles including fluoride, nitriles, carboxylic acids, alcohols and even water thereby allowing highly functionalized products, with a stereocenter bearing both C(sp³)−F and C(sp³)−CF₃ groups, to be generated rapidly. Scalability (up to 3 mmol), and facile post-reaction modifications are demonstrated to underscore the utility of the method in expanding organofluorine chemical space.     

Construction of chiral quarternary carbon centers using 3-substituted-5-trimethylsilyl-2-cyclohexenones: Synthesis of (+)−∝-cuparenone

1,4-Addition of Grignard reagents to 3-substituted 5-trimethylsilyl-2-cyclohexenones proceeded in a highly diastereoselective manner. By utilizing the reaction, (+) −∝-cuparenone was synthesized starting from enantiomerically pure 3-p-tolylthio-5-(trimethylsilyl) cyclohexanone.     

Reaction of polyfluorinated cyclohexa-2,4-dienones with aryl nitrile oxides

Reaction of 1,3-dipolar cycloaddition of 6-chloropentafluorocyclohexa-2,4-dienone, 6-chloro-3-(pentafluorophenoxy)tetrafluorocyclohexa-2,4-dienone, and perfluoro-6-phenoxycyclohexa-2,4-dienone with aryl nitrile oxides proceeds highly stereoselectively at the c C=O group of the dienone providing in a high yield mixtures of diastereomeric fluorine-containing 3-aryl-1,4-dioxa-2-azaspiro[4,5]deca-2,6,8-trienes. The reaction of the latter with sodium pentafluorophenolate proceeds along the type of allyl substitution affording polyfluorinated 3-aryl-8-phenoxy-1,4-dioxa-2-azaspiro[4,5]deca-2,6,9-trienes.     

BF3.Et2O-catalyzed direct carbon-carbon bond formation of alpha-EWG Ketene-(S,S)-acetals and alcohols and synthesis of unsymmetrical biaryls

A highly efficient BF3.OEt2-catalyzed formal dehydration C-C coupling reaction between readily available alpha-EWG ketene-(S,S)-acetals and various alcohols via direct substitution of the hydroxy group in alcohols has been developed. On the basis of this C-C coupling reaction, a series of alkylated alpha-EWG ketene-(S,S)-acetals and functionalized 1,4-pentanedienes were prepared in high to excellent yields and the unsymmetrical biaryls were synthesized in good yields from the generated 1,4-pentanedienes and nitroalkanes through a one-pot annulation-aromatization process.     

Rearrangements and interconversions of heteroatom-substituted isocyanates, isothiocyanates, nitrile oxides, and nitrile sulfides, RX-NCY and RY-CNX

Isocyanates and isothiocyanates of the type RX-NCY (X and Y = O or S) and the isomeric nitrile oxides and nitrile sulfides RY-CNX are highly reactive compounds. A number of potential 1,4-shifts of substituent groups of the type R-Y-CNX → R-X-N═C═Y, 1,3-shifts R-C(═Y)-N═X → R-X-N═C═Y, and 1,2-shifts R-C(═Y)-N═X → R-Y-CNX have been evaluated computationally. The results obtained for the relatively new functional MPW1K and the well-established B3LYP, together with a triple-ζ quality basis set, are very similar. The 1,3- and 1,4-halogen shifts in the title compounds are usually highly exothermic and possess low activation barriers. 1,3-Aryl shifts are feasible for for 5e → 6e (Ar-CO-NSO(2) → Ar-SO(2)-NCO) with activation barriers of less than 40 kcal/mol. Additionally, several 1,3- and 1,4-hydrogen shifts and the 1,4-methyl-shift in methoxynitrile sulfide MeO-CNS to methylsulfenyl isocyanate MeS-NCO (4c → 6c) are potentially feasible. The 1,2-shift reactions 4b → 5b (HO-NCS → H-CS-NO) and 4c → 5c (Ar-O-CNS→ Ar-CO-NS) are good candidates for experimental observation with activation energies around 30 kcal/mol.     

An efficient synthesis of 1,4-dideoxy-1,4-imino-d- and l-arabinitol and 1,4-dideoxy-1,4-imino-d- and l-xylitol from chiral aziridines

A highly efficient method for the synthesis of 1,4-dideoxy-1,4-imino-d- and l-arabinitol (d-AB1, 1 and l-AB1, 3) and 1,4-dideoxy-1,4-imino-d- and l-xylitol (d-DIX, 2 and l-DIX, 4) starting from commercially available chiral aziridines was developed. The general strategy employs a sequence involving two-carbon homologation, dihydroxylation, and regioselective aziridine ring opening/intramolecular five-membered iminosugar ring formation. The facile use of recrystallization to generate pure diastereomers makes the routes more amenable to large-scale synthesis.     

Models for the reactive states of homocuprates: syntheses, structures and reactivities of [Cu2Li2Mes4] and [Cu3LiMes4

The synthesis and characterisation of two novel tetranuclear and thermally-stable lithium arylcuprates, [Cu(2)Li(2)Mes(4)] and [Cu(3)LiMes(4)], are reported and [Cu(3)LiMes(4)] is shown to be a highly active promoter for the 1,4-addition of organolithiums to enones.