An ab initio/RRKM study of product branching ratios in the photodissociation of buta-1,2- and -1,3-dienes and but-2-yne at 193 nm

Ab initio G2M(MP2)//B3LYP/6-311G** calculations have been performed to investigate the reaction mechanism of photodissociation of buta-1,2- and -1,3-dienes and but-2-yne after their internal conversion into the vibrationally hot ground electronic state. The detailed study of the potential-energy surface was followed by microcanonical RRKM calculations of energy-dependent rate constants for individual reaction steps (at 193 nm photoexcitation and under collision-free conditions) and by solution of kinetic equations aimed at predicting the product branching ratios. For buta-1,2-diene, the major dissociation channels are found to be the single Cbond;C bond cleavage to form the methyl and propargyl radicals and loss of hydrogen atoms from various positions to produce the but-2-yn-1-yl (p1), buta-1,2-dien-4-yl (p2), and but-1-yn-3-yl (p3) isomers of C(4)H(5). The calculated branching ratio of the CH(3) + C(3)H(3)/C(4)H(5) + H products, 87.9:5.9, is in a good agreement with the recent experimental value of 96:4 (ref. 21) taking into account that a significant amount of the C(4)H(5) product undergoes secondary dissociation to C(4)H(4) + H. The isomerization of buta-1,2-diene to buta-1,3-diene or but-2-yne appears to be slower than its one-step decomposition and plays only a minor role. On the other hand, the buta-1,3-diene-->buta-1,2-diene, buta-1,3-diene-->but-2-yne, and buta-1,3-diene-->cyclobutene rearrangements are significant in the dissociation of buta-1,3-diene, which is shown to be a more complex process. The major reaction products are still CH(3) + C(3)H(3), formed after the isomerization of buta-1,3-diene to buta-1,2-diene, but the contribution of the other radical channels, C(4)H(5) + H and C(2)H(3) + C(2)H(3), as well as two molecular channels, C(2)H(2) + C(2)H(4) and C(4)H(4) + H(2), significantly increases. The overall calculated C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is 24.0:49.6:4.6:6.1:15.2, which agrees with the experimental value of 20:50:8:2:2022 within 5 % margins. For but-2-yne, the one-step decomposition pathways, which include mostly H atom loss to produce p1 and, to a minor extent, molecular hydrogen elimination to yield methylethynylcarbene, play an approximately even role with that of the channels that involve the isomerization of but-2-yne to buta-1,2- or -1,3-dienes. p1 + H are the most important reaction products, with a branching ratio of 56.6 %, followed by CH(3) + C(3)H(3) (23.8 %). The overall C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is predicted as 62.0:23.8:2.5:5.7:5.6. Contrary to buta-1,2- and -1,3-dienes, photodissociation of but-2-yne is expected to produce more hydrogen atoms than methyl radicals. The isomerization mechanisms between various isomers of the C(4)H(6) molecule including buta-1,2- and -1,3-dienes, but-2-yne, 1-methylcyclopropene, dimethylvinylidene, and cyclobutene have been also characterized in detail.     

The reactivities of diarylbutadienes towards the benzoyloxy radical: the cases of 1-(1′-naphthyl)-4-phenylbuta-l,3-diene and 1,4-Di (1′-Naphthyl)buta-1,3-Diene

A study has been made of end-groups in poly(methyl methacrylate) prepared using benzoyl peroxide as initiator and either 1-(1′-naphthyl)4-phenylbuta-1,3-diene or 1,4-di(1′-naphthyl)buta-1,3-diene as additive. At 60°C, these dienes are 500–600 times as effective as methyl methacrylate in capturing benzoyloxy radicals and more than twice as effective as 1,4-diphenylbuta-1,3-diene.     

Diazo Reactions with Unsaturated Compounds: VI. Reaction of 1-(p-Nitrophenylsulfonyl)buta-1,3-diene with Arenediazonium Chlorides

1-(p-Nitrophenylsulfonyl)buta-1,3-diene reacts with arenediazonium chlorides in aqueous acetone in the presence of catalytic amounts of CuCl₂·2H₂O to form 1-(p-nitrophenylsulfonyl)-4-aryl-3-chloro-1-bu- tenes. In the presence of SO₂, 1-(p-nitrophenylsulfonyl)buta-1,3-diene does not react with arenediazonium chlorides.     

Cross-coupling of E,E-1,4-diiodobuta-1,3-diene with nucleophiles catalyzed by Pd or Ni complexes: a new route to functionalized dienes

E,E-1,4-Diiodobuta-1,3-diene can enter into cross-coupling reactions with carbon- or other element-centered nucleophiles in the presence of Pd or Ni complexes as catalysts. Convenient procedures were developed for the stereoselective synthesis of E,E-1,4-dialkenylbuta-1,3-dienes, dienyl-1,4-bisphosphonates, E,E-1,4-bis(diphenylphosphino)buta-1,3-diene, E,E-1,4-diphenylbuta-1,3-diene, and E,E-1,4-bis(thiophenyl)buta-1,3-diene.     

The structure and dynamic behaviour in solution of the trihydridodienerhenium complexes (Ph3P)2(η-1,3-diene)ReH3

The structure and fluxionality of the trihydridodiene complexes (Ph₃P)₂(η-1,3-<di-ene)ReH₃ have been studied by NMR spectroscopy (η-1-3-diene = buta-1,3-diene, 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, cyclohexa-1,3-diene, penta-1,3-diene, hexa-1,3-diene and hexa-2,4-diene). Several rearrangement processes have been observed; they are, in order of increasing temperature: (a) ligand interchange; (b) reversible migration of a hydride ligand on to the diene ligand, leading to η-allyl species and, in the case of the cyclohexadiene trihydride, degenerate isomerisation of the cyclohexadiene moiety; and (c), in the case of the pentadiene and hexadiene derivatives, isomerisation of the diene ligand.     

Two-step regioselective synthesis of 1,2-difluorobenzenes from chlorotrifluoroethylene and buta-l,3-dienes

Russian Chemical Bulletin - The gas-phase copyrolysis of chlorotrifluoroethylene with buta-1,3-diene, penta-1,3-diene, or isoprene in a flow reactor at 440–480°C gave...     

Basic hydrolysis of l,4-bis(triphenylphosphonio)buta-1,3-diene dihalides

Basic hydrolysis of 1,4-bis(triphenylphosphonio)buta-1, 3-diene dichloride with 10% NaOH gave isomeric 4-diphenylphosphoryl-4-phenylbut-1(2)-enes and 1-diphenylphosphoryl-1-phe-nylbuta-1, 3-diene, the products of anionotropic migration of a phenyl group from the P atom to the α-position. Hydrolysis with Na₂CO₃ afforded only the diene product. In both cases, triphe-nylphosphine and triphenylphosphine oxide were isolated as secondary products. Dehydro-chlorination of 2-chloro-1,4-bis(triphenylphosphonio)but-2-ene dibromide with triphenylphosphine was proposed as a new convenient route to 1,4-bis(triphenylphosphonio)buta-1,3-diene dibromide.     

GeCl<Subscript>2</Subscript> cycloaddition reactions to unsaturated organic compounds taking ethylene,buta-1,3-diene,and hexa-1,3,5-triene as examples: a quantum chemical study

The cycloaddition reactions of dichlorogermylene GeCl₂ to ethylene, buta-1,3-diene, and hexa-1,3,5-triene were studied within the framework of the density functional theory (PBE and B3LYP density functionals) and by the ab initio CBS-QB3 method. The energy characteristics of the reaction of GeCl₂ with ethylene were refined and non-empirical quantum chemical calculations of reaction pathways in the GeCl₂ + buta-1,3-diene and GeCl₂ + hexa-1,3,5-triene systems were carried out for the first time. It was shown that the [2+1] cycloaddition reactions are kinetically hindered and thermodynamically unfavorable, while the [4+1] and [6+1] cycloaddition reactions are characterized by low barriers and result in thermodynamically favorable products. For the [4+1] cycloaddition to buta-1,3-diene and [6+1] cycloaddition to hexa-1,3,5-triene, the most energetically favorable reaction pathways involve a suprafacial and antarafacial approach of reactants, respectively.     

A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

13C,13C coupling constants of conjugated dienes

One bond ¹³C,¹³C- and ¹³C,¹H-coupling constants have been measured for some 1,2-dimethylene-cycloalkanes, as well as for 2,3-dimethylbuta-1,3-diene and methylenecyclobutane. The results for 2,3-dimethylbuta-1,3-diene confirm the findings for buta-1,3-diene, i.e. that J(C-1, C-2) is smaller for the diene than for the correspondingly substituted monoene. No differences have been found between the ¹J(CC) exocyclic coupling constants of the dimethylene and monomethylene cycloalkanes.     

Synthesis of 2-Acetyl-5,8-dihydro-1,4-dihydroxy-3-methyl Naphthalene: A Product from the Isomerisation of Diels-Alder Adducts of Both 5-Methyl- and 6-Methyl-2-acetyl-1,4-benzoquinone with 1,3-Butadiene

2-Acetyl-5,8-dihydro-1,4-dihydroxy-3-methyl-naphthalene was synthesised via Diels-Alder addition of 2-acetyl-3-methyl-1,4-benzoquinone to buta-1,3-diene followed by enolisation. It was identical with material obtained by pyridine-induced acetyl migration from the 1,3-butadiene adducts of both 3- and 6-methyl-2-acetyl-1,4-benzoquinone.     

Diels-Alder cycloaddition of novel buta-1,-3-diene derivatives possessing a (diethoxyphosphinoyl)difluoromethyl unit

A series of new buta-1,3-diene derivatives possessing a (diethoxyphosphinoyl)difluoromethylene unit at the terminal carbon was prepared to examine the reactivity for Diels-Alder cycloaddition with various representative dienophiles.     

1,3-Dipolar cycloaddition of diazocyclopropane to strained cycloalkenes and conjugated dienes to give spiro(1-pyrazoline-3,1′-cyclopropanes)

Polycyclic spiro(1-pyrazoline-3,1-cyclopropanes) were obtained in 32–70 % yields by the reaction of diazocyclopropane generatedin situ with 2-methyltricyclo[3.2.1.0^2,4]oct-6-ene, spiro[2,4]hepta-4,6-diene dimer, benzvalene, spiro[2,3]hex-1-ene, methyl 1-methylcyclopropene-3-carboxylate, buta-1,3-diene, and 2-methylbuta-1,3-diene.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2199–2202, November, 1995.This study was financially supported by the Russian Foundation for Basic Research (Grant No. 94-03-08902).     

Transmetallation of beta-allenyl silanes: efficient synthesis of dienyl chlorostannanes and chlorostibines

The reaction of 1-trimethylsilylbuta-2,3-diene with tin tetrachloride, antimony trichloride or antimony pentachloride gave the corresponding buta-1,3-dien-2-yl halostannane or stibine derivatives; this ligand exchange was extended to other beta-allenylsilanes.     

Ab initio studies of

Ab initio calculations of the [1,5]-H shift in (3Z)-penta-1,3-diene and other substituted pentadienes and heteroanalogues using the hybrid density functional Becke3LYP with the 6-31G basis set are presented. Electron-donating substituents, such as methoxy in (3Z)-3-methoxypenta-1,3-diene 1, or heteroatoms such as a nitrogen atom in (Z)-ethylidenevinylamine 2, (1Z)-buta-1,3-dienylamine 3, (2Z)-but-2-enylideneamine 4, (Z)-allylidenemethylamine 5, and methylene-(Z)-propenylamine 6 are introduced. The electron-withdrawing fluoride is substituted for the hydrogen atoms in (3Z)-3-fluoropenta-1,3-diene 7, (3Z)-2,4-difluoropenta-1,3-diene 8, (3Z)-1,1',2,3,4,5,5'-heptafluoropenta- 1,3-diene 10, (1E,3E)-1,3,5-trifluoropenta-1,3-diene 11, and (1Z,3E)-1,3,5- trifluoropenta-1,3-diene 13. A detailed analysis of the geometries, energies, and electronic characteristics of the sigmatropic transposition compared to those of the unsubstituted case provides insights into substituent effects of this prototype of pericyclic reaction. The inductive and mesomeric effects of heteroatoms or heterosubstituents are of a great importance and in a continuous balance in the energetics of the transformation. Sterics can also play an important role due to the geometrical constraints of the reaction. As a general trend, decreasing the electron density of the phi system destabilizes the aromatic transition structure and increases the activation energy, and vice versa.     

Low-lying excited states and primary photoproducts of [Os3(CO)10(s-cis-L)] (L=cyclohexa-1,3-diene, buta-1,3-diene)] clusters studied by picosecond time-resolved UV/Vis and IR spectroscopy and by density functional theory

Combined picosecond transient absorption and time-resolved infrared studies were performed, aimed at characterising low-lying excited states of the cluster [Os(3)(CO)(10)(s-cis-L)] (L=cyclohexa-1,3-diene, 1) and monitoring the formation of its photoproducts. Theoretical (DFT and TD-DFT) calculations on the closely related cluster with L=buta-1,3-diene (2') have revealed that the low-lying electronic transitions of these [Os(3)(CO)(10)(s-cis-1,3-diene)] clusters have a predominant sigma(core)pi*(CO) character. From the lowest sigmapi* excited state, cluster 1 undergoes fast Os-Os(1,3-diene) bond cleavage (tau=3.3 ps) resulting in the formation of a coordinatively unsaturated primary photoproduct (1 a) with a single CO bridge. A new insight into the structure of the transient has been obtained by DFT calculations. The cleaved Os-Os(1,3-diene) bond is bridged by the donor 1,3-diene ligand, compensating for the electron deficiency at the neighbouring Os centre. Because of the unequal distribution of the electron density in transient 1 a, a second CO bridge is formed in 20 ps in the photoproduct [Os(3)(CO)(8)(micro-CO)(2)(cyclohexa-1,3-diene)] (1 b). The latter compound, absorbing strongly around 630 nm, mainly regenerates the parent cluster with a lifetime of about 100 ns in hexane. Its structure, as suggested by the DFT calculations, again contains the 1,3-diene ligand coordinated in a bridging fashion. Photoproduct 1 b can therefore be assigned as a high-energy coordination isomer of the parent cluster with all Os-Os bonds bridged.     

Push-Pull Butadienes: Evidence for a possible C?H…︁S hydrogen bond in 4-(methylthio)-4-nitro-1-(pyrrolidin-1-yl)buta-1,3-diene

X-Ray crystal structure of 4-(methylthio)-4-nitro-1-(pyrrolidin-1-yl)buta-1,3-diene ( 2b )

1 The C-atoms of the butadiene chain have been numbered as shown in 1 and 2 . These numbers have been retained throughout the discussion for the sake of clarity and consistency.

indicates the presence of a C? H…?S hydrogen bond. This might also explain the observed downfield shift of this proton in solution.     

Effect of basic set quality and electron correlation on the scale factors of a harmonic force field

The completely optimized structure and harmonic force field of s-trans-buta-1,3-diene are reported at the MP2/6-31G and MP2/6-31G* levels of computation. Sets of empirical scale factors for the calculated force fields are derived and compared with the corresponding values computed at the RHF/4-31G and RHF/6-31G levels. Changes in the scale factors for this series of force fields are discussed. The vibrational frequencies are also reported for thirteen isotopomers of s-trans-buta-1,3-diene using the MP2/6-31G* force field. Some characteristics of the gauche and cis forms of buta-1,3-diene are also given.     

Synthesis, characterization and fluorescence studies of novel bi-phenyl based acrylate and methacrylate

4-[(1E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl prop-2-enoate (ACH) and 4-[(1E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl 2-methylprop-2-enoate (MCH) was synthesized from biphenyl in three steps and their structures were confirmed by elemental analysis, IR, NMR (1H, 13C, DEPT135, 1H-1H COSY, 1H-13C HSQC and 1H-13C HMBC) spectroscopic techniques. In this present study, various physicochemical characteristics we demonstrate solubility, color, absorbance and fluorescence property of novel biphenyl based acrylate and methacrylate measured in different solvents like benzene, dichloromethane, tetrahydrofuran, acetonitrile, dimethylsulfoxide and ethanol.     

Synthetic utility of 3-(perfluoro-1,1-dimethylbutyl)prop-1-ene. Part VI. A free-radical addition of CCl4 and CBr4 and dehydrohalogenation of the adducts

Heating the title compound 1 in excess CCl₄ and in the presence of a free-radical initiator (t-butyl peroxide) at 120 °C afforded 1,1,1,3-tetrachloro-4-(perfluoro-1,1-dimethylbutyl)butane (2) as the main product together with considerable amounts of cyclic dimer, 1,4-bis(perfluoro-1,1-dimethylbutyl)cyclohexane (3). Reaction of 1 with CBr₄ at 120 °C gave 1,1,1,3-tetrabromo-4-(perfluoro-1,1-dimethylbutyl)butane (4) as the sole product while at 220 °C a mixture of 1,2-dibromo-3-(perfluoro-1,1-dimethylbutyl)propane (5) and 1,1-dibromo-4-(perfluoro-1,1-dimethylbutyl)buta-1,3-diene (6) was formed. Treatment of adducts 2 and 4 with methanolic potassium hydroxide at ambient temperature gave mixtures of 1,1,3-trihalo-4-(perfluoro-1,1-dimethylbutyl)but-1-enes (7) or (8) and 1,1-dihalo-4-(perfluoro-1,1-dimethylbutyl)buta-1,3-dienes (9) or (6) in ratios depending on the adduct to base ratio and on the reaction conditions. Using an excess of the base and reflux temperature, adduct 4 and diene 6 were converted into methyl 4-(perfluoro-1,1-dimethylbutyl)buten-3-oate (10).