Aquomolybdenum(III) chloride as a reducing titrant A potentiometric study

The use of aquomolybdenum(III) chloride as a reducing agent for the direct potentiometric titration of Ce(IV), Cr(VI), Fe(III), V(V), Mo(VI), U(VI) and H(2)O(2) is described. The variation of the formal redox potentials of Mo(V)/Mo(IV) and Mo(IV)/Mo(III) in varying concentrations of hydrochloric, phosphoric and acetic acids is investigated. Aquomolybdenum(III) chloride is found to be a better reducing titrant than chloromolybdate(III) and gives better breaks in the titration curves. In the titration of molybdenum(VI) in 3M HCl the titration curve shows three jumps, corresponding to the reductions of Mo(VI) to Mo(V). and Mo(V) to Mo(IV) via an apparently intermediate oxidation state which presumably corresponds to a dimeric mixed-valence species. The aquomolybdenum(III) complex ion is a better reducing titrant than chloromolybdate(III) and has a wider applicability.     

Electrometric titrations of Cr(VI), Mn(IV), V(V), Co(III) and U(VI) with a standard iron(II) solution in alkaline media containing hexitols

Direct and indirect potentiometric, bipotentiometric and biamperometric titrations with a standard iron(II) solution are described for some inorganic compounds in alkaline media containing hexitols (mannitol, dulcitol and sorbitol). The optimal conditions for titrations based on the Cr(VI) → Cr(III), Mn(IV) → Mn(III) → Mn(II), V(V) → V(IV), Co(III) → Co(II) and U(VI) → U(IV) systems are discussed. Of the hexitols studied, sorbitol has the greatest effect on the value of the redox potential of the Fe(III)/Fe(II) system; the E_f° value is about —1.10 V vs. SCE.     

Electrochemical and complexation behavior of neptunium in aqueous perchlorate and nitrate solutions

Electrochemical and complexation properties of neptunium (Np) are investigated in aqueous perchlorate and nitrate solutions by means of cyclic voltammetry, bulk electrolysis, UV-visible absorption, and Np L(III)-edge X-ray absorption spectroscopies. The redox reactions of Np(III)/Np(IV) and Np(V)/Np(VI) couples are reversible or quasi-reversible, while the electrochemical reaction between Np(III/IV) and Np(V/VI) is irreversible because they undergo structural rearrangement from spherical coordinating ions (Np(3+) and Np(4+)) to transdioxoneptunyl ions (NpO2(n+), n = 1 for Np(V) and 2 for Np(VI)). The redox reaction of the Np(V)/Np(VI) couple involves no structural rearrangement on their equatorial planes in acidic perchlorate and nitrate solutions. A detailed analysis on extended X-ray absorption fine structure (EXAFS) spectra suggests that Np(IV) forms a decaaquo complex of [Np(H2O)10](4+) in 1.0 M HClO4, while Np(V) and Np(VI) exist dominantly as pentaaquoneptunyl complexes, [NpO2(H2O)5](n+) (n = 1 for Np(V) and 2 for Np(VI)). A systematic change is observed on the Fourier transforms of the EXAFS spectra for all of the Np oxidation states as the nitrate concentration is increased in the sample, revealing that the hydrate water molecules are replaced by bidentate-coordinating nitrate ions on the primary coordination sphere of Np.     

Extraction of actinides with heterocyclic dicarboxamides

Extraction of actinides from aqueous nitric acid by three different heterocyclic dicarboxamides (2,6-pyridinedicarboxamide, 2,2′-bipyridine-6,6′-dicarboxamide and 1,10-phenanthroline-2,9-dicarboxamides) was studied. It was shown that all studied ligands extract actinides at different oxidation states (U(VI), Np(V), Pu(IV), Am(III), Cm(III)) from acidic solutions. All studied diamides extract Am(III) better than Cm(III). Et(pHexPh)ClPhen contains electron-withdrawing chlorine atoms at the positions 4 and 7 of the phenanthroline moiety (SF_Am/Cm = 4–6) and possesses the highest separation factor Am(III)/Cm(III). The studied ligands possess high extraction ability to all actinides present in HLW and therefore they could be used for simultaneous extraction of actinides in the GANEX-type process.     

Evaluation of a rapid technique for measuring actinide oxidation states in a ground water simulant

A system using an ion chromatograph coupled to a flow-cell scintillation detector for rapidly measuring the oxidation states of actinides at low concentrations (<10–6M) in aqueous solutions was evaluated. The key components of the system are a cation–anion separation column (Dionex, CS5) and a flow cell detector with scintillating cerium activated glass beads. The typical procedure was to introduce a 0.5 ml aliquot of sample spiked with actinides in the +III to +VI oxidation states into a 5 ml sample loop followed by 4 ml of synthetic groundwater simulant. Separation was achieved at a flow rate of 1 ml/min using an isocratic elution with oxalic, diglycolic, and nitric acids followed by distilled water. Tests were first conducted to determine elution times and recoveries for an acidic solution (pH 2) and a ground water simulant (pH 8) containing Am(III), Pu(IV), Th(IV), Pu(V), and U(VI). Then, an analysis was performed using a mixture of Pu(IV), Pu(V), and Pu(VI) in the ground water simulant and compared to results using the DBM extraction technique. Approximate elution times were the same for both the acidic solution and the ground water simulant. These were as follows: Pu(V) at 10 min, Am(III) at 15 min, Pu(IV) at 25 min, Th (IV) at 28 min and U(VI) at 36 min. Recoveries for the acidic solution were quantitative for U(VI) and Th(IV) and exceeded 80% for Am(III). Recoveries for the ground water simulant were quantitative for U(VI), but they were generally not quantitative for Th(IV), Pu(IV), and Am(III). For Th(IV) and Pu(IV), less than quantitative recoveries were attributed to the formation of neutral hydroxides and colloids; for Am(III) they were attributed to insoluble carbonates and/or hydroxycarbonates. When applied to the measurement of plutonium in the ground water simulant, the technique provided showed good agreement with the dibenzoylmethane (DBM) extraction technique, but it could not distinguish between Pu(V) and Pu(VI). This was likely due to the reduction of Pu(VI) to Pu(V) in the sample by the oxalic acid eluent. However, in spite of this limitation, the technique can be used to distinguish between Pu(IV) and Pu(V) in aqueous environmental samples within a pH range of 4 to 8 and an E _H range of -0.2 to 0.6 V, the predominance region for Pu(III), (IV), and (V). In addition, this technique can be used to corroborate oxidation state analysis from the dibenzoylmethane (DBM) extraction method for environmental samples.     

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI)

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.     

New insights on the mechanism of oxidation of D-galacturonic acid by hypervalent chromium

The pollutant Cr(VI) is known to be very carcinogenic. In conditions of excess of Cr(VI), oxidation of D-galacturonic acid (Galur), the major metabolite of pectin, yields d-galactaric acid (Galar) and Cr(III). The redox reaction takes place through a multistep mechanism involving formation of intermediate Cr(II/IV) and Cr(V) species. The mechanism combines one- and two-electron pathways for the reduction of Cr(IV) by the organic substrate: Cr(VI)→ Cr(IV)→ Cr(II) and Cr(VI)→ Cr(IV)→ Cr(III). This is supported by the observation of the optical absorption spectra of Cr(VI) esters, free radicals, CrO(2)(2+) (superoxoCr(III) ion) and oxo-Cr(V) complexes. Cr(IV) cannot be directly detected; however, formation of CrO(2)(2+) provides indirect evidence for the intermediacy of Cr(II/IV). Cr(IV) reacts with Galur much faster than Cr(V) and Cr(VI) do. The analysis of the reaction kinetics via optical absorption spectroscopy shows that the Cr(IV)-Galur reaction rate inversely depends on [H(+)]. Nevertheless, high [H(+)] still does not facilitate accumulation of Cr(IV) in the Cr(VI)-Galur mixture. Cr(VI) and the intermediate Cr(V) react with Galur at comparable rates; therefore the build-up and decay of Cr(V) accompany the decay of Cr(VI). The complete rate laws for the Cr(VI), Cr(V) and Cr(IV)-Galur redox reaction are here derived in detail. Furthermore, the nature of the five-co-ordinated oxo-Cr(V) bischelate complexes formed in Cr(VI)-Galur mixtures at pH 1-5 is investigated using continuous-wave and pulsed electron paramagnetic resonance (EPR) and density functional theory (DFT).     

Study of Am and Pu behavior in alkaline media

The redox chemical behavior of americium and plutonium species in alkaline media has been studied, mainly two dis/reproportionation reactions: 2 Pu(VI) = Pu(V) + Pu(VII) and Am(III) + Am(V) = 2Am(IV). It was found that Am(VI) is readily reduced by the simple action of water, and that radiolysis has no effect. This is a marked departure from the behavior of Am in other media, where alpha particle self-irradiation generates redox active species that affect the Am oxidation state. An Am(VII) compound has been synthesized. All results are interesting for the treatment of alkaline high-level radioactive wastes. To cite this article: A.P. Nikonov et al., C. R. Chimie 7 (2004).

Résumé

Étude du comportement de Am et Pu en milieu alcalin. Le comportement redox de Am et Pu a été étudié en milieu alcalin, notamment les dismutations 2 Pu(VI) = Pu(V) + Pu(VII) et 2 Am(IV) = Am(III) + Am(V). Am(VI) est rapidement réduit par l’eau et la radiolyse n’a pas d’effet, contrairement à ce qui se produit dans d’autres milieux. Des indications ont été obtenues sur un composé de Am(VII). Les résultats obtenus sont intéressants pour le traitement des déchets nucléaires encore entreposés en milieu basique. Pour citer cet article : A.P. Nikonov et al., C. R. Chimie 7 (2004).     

Discrete covalent organic-inorganic hybrids: terpyridine functionalized polyoxometalates obtained by a modular strategy and their metal complexation

The rational design and synthesis of organic-inorganic hybrids as functional molecular materials relies on both the careful conception of building-blocks and the strategy for their assembly. Three families of trialkoxo polyoxometalates (Lindqvist 2, Anderson 3, Dawson 4) grafted with remote terpyridine coordination sites have been synthesized to extend the available building-blocks. These new units can be combined with metal complexes that play a role as (i) chromophores toward charge-separated systems in light-harvesting devices and (ii) coordination motifs for metal-directed self-assembly toward multifunctional molecular hybrid materials. The X-ray crystal structures of polyoxometalate-terpyridine hybrids indicate distances of 21 ? and 19 ? between the two terpyridyl coordination sites in 2 and 3, respectively, with angles between the coordination vectors of 180° and 177.4°, respectively. Lindqvist 2 displays a reduction at -0.52 V vs SCE while Anderson 3 exhibits one reversible oxidation attributed to Mn(III)/Mn(IV) (+0.75 V vs SCE) and a broad wave at -1.28 V vs SCE assigned to the Mn(III)/Mn(II) reduction. Dawson 4 displays several processes on a wide range of potentials (+0.5 to -2.0 V vs SCE) centered on V(V), W(VI) and the organic ligand in order of decreasing potentials. The grafted terpyridine ligands in Anderson 3 and Dawson 4 were successfully coordinated to {PdCl}(+) and {RuCl(3)} moieties, respectively. The polyoxometalates and transition metal complexes retain their intrinsic properties in the final assemblies.     

Electrochemical Behavior of Ce(IV)/Ce(III) Couple in N,N-Di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-Di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-Di(2-ethylhexyl)-3,3-dimethyl Butanamide (DEHDMBA)

In this work we report on the electrochemical behavior of Ce(IV)/Ce(III) redox couple in pure N,N-dialkyl amides (N,N-DA), namely N,N-di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-di(2-ethylhexyl)-3,3-dimethyl butanamide (DEHDMBA) equilibrated with nitric aqueous solutions as an entry to the direct electrochemical characterization of plutonium in these extractants. Ce(IV)/Ce(III) redox process was used as a model. Its potential (E_1/2≅1.02 V/SCE) is not affected by the temperature and the nature of the N,N-DA and this clearly indicates that the functionalities of these extractants produce the same relative effect on both +IV and +III oxidation states of the cerium cation. Linear variations of the current intensity of the reduction peak of Ce(IV) with the concentration of Ce(IV)/N,N-DAs/HNO₃(5 M) solutions were obtained from cyclic voltammograms recorded at 25 °C and 40 °C. Due to the poor definition of the voltammograms in DEHiBA and DEHDMBA, such characterization allows only the evaluation of the performances of the chemical extraction of Ce(IV) from aqueous nitric acid solution by the undiluted DEHBA. To our knowledge, the electrochemical behavior of Ce(IV)/Ce(III) in N,N-DAs was not previously studied and our findings will for sure open the door for further investigations in this field.     

Electrochemistry of uranium in sodium chloroaluminate melts

The electrochemical behaviour of uranium has been studied in basic, NaCl-saturated NaAlCl₄ melts at 175°C. Solutions of UO₃ exhibit two oxidation/reduction waves (cyclic voltammetry). The first wave corresponds to the U(VI)/U(IV) redox couple and is irreversible (slow electron transfer). The second wave corresponds to the deposition and stripping of an insoluble U(III) compound (U(IV)/U(III)). Solutions of UO₂ or UCl₄ and U(IV) solutions prepared by exhaustive electrolysis of UO₃ behave identically. The cyclic voltammograms of U(IV) solutions are the same as those of UO₃, but they show additional anodic peaks. Analysis of the peak currents (cyclic voltammetry), the limiting currents (pulse polarography) and the non-linear log i-t curves (anodic controlled potential coulometry) leads to the conclusion that uranium (IV) in the basic chloroaluminate melt exists as two different species in slow equilibrium with one another, of which only one species can be oxidized to U(VI). E.m.f. measurements of U(VI)-U(IV) mixtures indicate that the electron transfer process involves the formation of an intermediate U(V) species in a disproportionation equilibrium.     

Metal-based anti-diabetic drugs: advances and challenges

The current status and likely future directions of complexes of V(V/IV), Cr(III), Mo(VI), W(VI), Zn(II), Cu(II), and Mn(III) as potential oral drugs against type 2 diabetes are reviewed. We propose a unified model of extra- and intracellular mechanisms of anti-diabetic efficacies of V(V/IV), Mo(VI), W(VI), and Cr(III), centred on high-oxidation-state oxido/peroxido species that inhibit protein tyrosine phosphatases (PTPs) involved in insulin signalling. The postulated oxidative mechanism of anti-diabetic activity of Cr(III) via carcinogenic Cr(VI/V) (which adds to safety concerns) is consistent with recent clinical trials on Cr(III) picolinate, where activity was apparent only in patients with poorly controlled diabetes (high oxidative stress), and the correlation between the anti-diabetic activities and ease of oxidation of Cr(III) supplements and their metabolites in vivo. Zn(II) and Cu(II) anti-diabetics act via different mechanisms and are unlikely to be used as specific anti-diabetics due to their diverse and unpredictable biological activities. Hence, future research directions are likely to centre on enhancing the bioavailability and selectivity of V(V/IV), Mo(VI), or W(VI) drugs. The strategy of potentiating circulating insulin with metal ions has distinct therapeutic advantages over interventions that stimulate the release of more insulin, or use insulin mimetics, because of many adverse side-effects of increased levels of insulin, including increased risks of cancer and cardiovascular diseases.     

Studies on the coulometric determination of uranium and plutonium employing a graphite electrode

Summary Graphite has been employed as a working electrode in the controlled potential coulometric determination of uranium and plutonium. The couples U(VI)/U(IV) and Pu(IV)/Pu(III) employed for analysis have diverse redox potentials and commonly the working electrodes employed are mercury and platinum. A graphite electrode in the shape of a beaker showed satisfactory performance for the quantitative reduction of U(VI) to U(IV) and Pu(IV) to Pu(III) and also for quantitative oxidation of Pu(III) to Pu(IV). Studies on the levels of the background current, blank values and their reproducible behaviour in acid media have been carried out with a view to achieve good precision and accuracy. A software-based predictive evaluation technique of end-point charge has been investigated. The results have shown that the graphite electrode can be used for the determination of both uranium and plutonium in the presence of each other with a precision and accuracy of better than ±0.5%.     

Chromatography of inorganic ions on polyethyleneimine cellulose layer in hydrochloric acid — Ammonium thiocyanate media

Summary Thin-layer chromatographic behavior of 58 inorganic ions on polyethyleneimine (PEI) cellulose has been systematically surveyed in hydrochloric acid — ammonium thiocyanate media. In this media most of the ions distribute chromatographically on the layer. Ag(I), Hg(II), Pd(II), Au(III), Bi(III), Ru(III), Pt(IV), Nb(V), Ta(V), Mo(VI), and W(VI) are strongly retained, while alkali earths(II), Mg(II), As(III), Ti(IV), and Te(VI) are not absorbed to any great extent in this system. An interesting correlation was found between the R_f values on PEI-cellulose in the thiocyanate media and the paramagnetic moment of the rare earths(III). An oddeven fluctuation against the atomic number is also found for the heavy rare earths(III). Chromatographic separation of many inorganic ions of analytical interest is demonstrated in this system.     

Extractive-spectrophotometric determination of molybdenum with 4-unsubstituted-5-pyrazolones

A fairly sensitive and selective method for rapid determination of tracer amounts of molybdenum(V) as mixed-ligand complexes with thiocyanate and 4-unsubstituted-5-pyrazolones is described. The red complexes are extractable into chloroform from 1-5M hydrochloric or perchloric acid or 1-3M sulphuric arid media. The molar absorptivities are in the range 1.72-2.15 x 10(4)l.mole(-1).cm(-1) at 455 nm (lambda(max)). The method has been applied to the estimation of molybdenum in various synthetic and alloy-steel samples. In presence of excess of the reagent, Cu(II), Co(II), Mn(II), Fe(II), Fe(III), Al(III), Cr(III), Cr(VI), Ti(III), Ti(IV), Zr(IV), Hf(IV), V(III), V(IV), V(V), Nb(V), Ta(V), W(VI) and U(VI) do not interfere.     

A Comparative Study of Functionalized High‐Purity Carbon Nanotubes towards the V(IV)/V(V) Redox Reaction Using Cyclic Voltammetry and Scanning Electrochemical Microscopy

Functionalized high purity carbon nanotubes (CNTs) with various amounts of oxygen containing surface groups were investigated towards the relevant redox reactions of the all‐vanadium redox flow battery. The quinone/hydroquinone redox peaks between 0.0 and 0.7 V vs. Ag|AgCl|KCl_sat. were used to quantifying the degree of functionalization and correlated to XPS results. Cyclic voltammetry in vanadyl sulfate‐containing 3 M H₂SO₄ as a common supporting electrolyte showed no influence of the amount of surface groups on the V(IV)/V(V) redox system. In contrast, the reactions occurring at the negative electrode (V(II)/V(III) and V(III)/V(IV)) are strongly affected by oxygen surface groups. However, under modified experimental conditions, SECM experiments detecting the consumption of VO²⁺ molecules by CNT thin films in pH=2 solution show improved onset potentials with increased surface oxygen content up to ∼ 3 at%. Further increase in surface oxygen up to 8 at% led to minor improvement. These dissimilar results under different experimental conditions are rationalized by suggesting that oxygen functional groups do not form the active site for the V(IV)/V(V) reaction but wetting of the catalyst layer is of high importance.     

Unusual reactivity of the [Re(V)O]3+ core: syntheses and characterization of novel rhenium halide complexes with n-methyl-o-diaminobenzene

The reactions of 1 or 2 equiv of N-methyl-o-diaminobenzene with trans-[ReOX(3)(PPh(3))(2)] (X = Cl, Br) in refluxing chloroform gave oxo-free rhenium complexes [Re(VI)X(4)(NC(6)H(4)NHCH(3))(OPPh(3))] (X = Cl, 3; X = Br, 6), [Re(V)X(2)Y(NC(6)H(4)NHCH(3))(PPh(3))(2)] (X, Y = Cl, 4; X = Br, Y = Cl, 7), [Re(IV)Cl(2)(NHC(6)H(4)NCH(3))(2)] (5), and [Re(IV)Br(3)(NHC(6)H(4)NCH(3))(PPh(3))] (8). All complexes were characterized by elemental analysis, (1)H NMR and IR spectroscopy, cyclic voltammetry, EPR spectroscopy, and X-ray crystallography. The complexes all display distorted octahedral coordination geometry. For Re(IV) complexes 5 and 8, the ligands coordinate in the benzosemiquinone diimine form. In Re(VI) complexes 3 and 6 and the Re(V) complexes 4 and 7, the ligands coordinate in the dianionic monodentate imido form. The EPR spectra of Re(VI) species 3 and 6 in dichloromethane solution at room temperature exhibit the characteristic hyperfine pattern of six lines, with evidence of strong second-order effects. The IR spectra of the complexes are characterized by Re=N and Re-N stretching bands at ca. 1090 and 540 cm(-)(1), respectively. The Re(IV) and Re(V) complexes display well-resolved NMR spectra, while the Re(VI) complexes exhibit no observable spectra, due to paramagnetism. The cyclic voltammograms of complexes 3 and 6 display Re(VII)/ Re(VI) and Re(VI)/Re(V) processes, those of 4 and 7 exhibit Re(VI)/Re(V) and Re(V)/Re(IV) couples, and those of 5 and 8 are characterized by Re(V)/Re(IV) and Re(IV)/Re(III) processes.     

2,3,7-Trihydroxyfluorones immobilized on cellulose matrices in test methods for determining rare elements

It was shown that 2,3,7-trihydroxyfluorones immobilized by adsorption on cellulose matrices can be used as reagents for the test determination of Mo(VI), Ti(IV), Ge(IV), Hf(IV), Nb(V), Ta(V), W(VI), Bi(III), V(IV), and Zr(IV). The change of the protolytic and complexing properties of trihydroxyfluorones immobilized on cellulose matrices was considered in comparison to corresponding properties in a solution. It was found that the reactions of trihydroxyfluorones with rare elements on cellulose matrices and in a solution exhibit similar effects upon the addition of cetylpyridinium. These effects are the bathochromic shift of the absorption maxima of the reagents and their complexes with analytes and the extension of the range of optimum acidity for complex formation. The complexation of salicylfluorones with the titanium(IV) in solution and on cellulose paper was studied by IR spectrometry. Phenylfluorone immobilized on a mixed-fiber cloth as used in test determinations of (mg/L) 0.05–5 Ti(IV), V(IV), Hf(IV), Nb(V), and Mo(VI); 0.01–5 Ge(IV) and Zr(IV); 0.05–1 Bi(III) and W(VI); and 0.1–5 Ta(V) by the color intensity of the indicator matrix after passing through 20 mL of a test solution. It was shown that phenylfluorone immobilized on cellulose paper can be used to determine (mg/L) 0.05–50 Ti(IV), 0.5–1000 Ge(IV), 0.5–500 Zr(IV), 5–200 Bi(III), 0.1–50 Mo(VI), 0.1–1000 V(IV), 0.1–100 Nb(V), 0.1–800 Hf(IV), 1–100 Ta(V), and 1–800 W(VI) by the length of the colored zone of a test strip after it was brought into contact with a test solution.     

Anion-exchange behavior of rare earths,thorium, protactinium and uranium in thiocyanate-chloride media

The anion exchange of rare earths(III), thorium(IV), protactinium(V) and uranium (VI) from thiocyanate-chloride media was investigated. The equilibrium, distribution study showed that the rare earths(III) and yttrium(III) were not significantly adsorbed on a basic anion-exchangc resin, while thorium(IV), protactinium(V) and uranium(VI) were strongly adsorbed. Adsorption from the thiocyanate-chloride solutions is in the order, U(Vl) > Pa(V) > Th(IV). The separation of rare earths(III) or yttrium(III), thorium(IV), protactinium(V) and uranium(VI) was successfully accomplished by column elution in thiocyanate-chloride media. A rapid and effective ion-exchange method for separating protactinium-233 from irradiated thorium(IV) is also presented.     

Study on Chemiluminescence Reactions of Lucigenin and Reductants by Flow Injection Analysis

Preceding studies involved two kinds of chemiluminescence (CL) reactions of Lucigenin(Lu ),one was the reaction of Lu with H=O, catalyzed by metal ions, the other was that ofLu with organic reductants such as glucose, uric acid and so on.We found that Mo (Ill),V (11 ),U (ill),W (ill),Cr (11 ),Ti (ill) and Fe (11 ), whichwere produced on-line by passing Mo (VI),V (V ),U (VI), W (VI), Cr (VI,lll),Ti (N) andFe (ill) through a micro Jones column', can react with Lu to generate strong …