Dynamic response of super-twisted nematic liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays was studied by detailed computer simulation. The time evolution of director configuration and velocity of flow as obtained by solving Ericksen-Leslie hydrodynamic equations. The influence of d/p value and pretilt angle on the dynamic response was also studied. A comparison was also made between twisted nematic and STN liquid crystal displays.     

Influence of cell and LC parameters on the dynamics of STN liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays have rarely been studied. In this article, the dynamic response of STN is analysed in detail. The evolution of director configuration with time was obtained by solving Ericksen-Leslie hydrodynamic equations. The time varying midlayer tilt angle is presented as a measure of dynamic response. The influence on STN dynamics of cell parameters including pretilt angle, twist angle, cell thickness, and of material parameters including d/p, K₂₂, K₃₃, were studied.     

Liquid crystalline 2,5-disubstituted pyridine derivatives

This paper presents a review of the work on the molecular design of liquid crystalline 2,5-disubstituted pyridine derivatives for the twisted nematic (TN) and super twisted nematic (STN) liquid crystal displays (LCDs) and examines in some detail the correlations between the molecular structure of pyridine derivatives and their physico-chemical properties.     

Influence of cell and LC parameters on the dynamics of STN liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays have rarely been studied. In this article, the dynamic response of STN is analysed in detail. The evolution of director configuration with time was obtained by solving Ericksen–Leslie hydrodynamic equations. The time varying midlayer tilt angle is presented as a measure of dynamic response. The influence on STN dynamics of cell parameters including pretilt angle, twist angle, cell thickness, and of material parameters including d/p, K ₂₂, K ₃₃, were studied.     

Analysis of operation mode of reflective twisted nematic liquid crystal display devices with rear film compensation

The rear film compensated reflective twisted nematic liquid crystal display device was studied in normally black and normally white operation conditions using a dynamic parameter space method. The electro-optical responses and reflectance spectra were also studied for different operation modes. A comparison was made between rear film and front film compensated reflective twisted nematic liquid crystal displays. We show that high quality normally white or normally black modes can be obtained by placing the fast axis of a quarter wave plate at 45° or 0° to the input director direction. The viewing angle characteristics of the optimum modes were also studied.     

Analysis of operation mode of reflective twisted nematic liquid crystal display devices with rear film compensation

The rear film compensated reflective twisted nematic liquid crystal display device was studied in normally black and normally white operation conditions using a dynamic parameter space method. The electro-optical responses and reflectance spectra were also studied for different operation modes. A comparison was made between rear film and front film compensated reflective twisted nematic liquid crystal displays. We show that high quality normally white or normally black modes can be obtained by placing the fast axis of a quarter wave plate at 45° or 0° to the input director direction. The viewing angle characteristics of the optimum modes were also studied.     

Polymer dispersed liquid crystal display device for projection high definition television application

Polymer dispersed liquid crystal (PDLC) is a light scattering material that operates on the principle of electrically modulating the refractive index of the liquid crystal in an optical isotropic, transparent solid. The principle of operation of the PDLC device, the interface requirements between PDLC material and its driving circuit are studied. For high definition television (HDTV) application, a detailed comparison of PDLC vs. twisted nematic/super twisted nematic (TN/STN) display devices will be discussed. It was found that single crystal metal oxide semiconductor field effect transistor (MOSFET) is better than conventionally used thin film transistor (TFT) in driving these PDLC light valves.     

液晶显示材料

介绍了液晶的结构类型,液晶分子的光电效应,实现液晶显示的偏振片透光原理,包括扭曲向列型（TN）、超扭曲向列型（STN）、薄膜晶体管型（TFT）液晶显示的异同,可用于液晶显示的有机材料,以及液晶显示材料的产业现状及发展趋势。     

Linear and non-linear liquid crystal materials, electro-optical effects and surface interactions. Their application in present and future devices

The structural, material and electro-optical properties of novel, halogenated nematic liquid crystals which contain quite different functional groups are correlated. Synergisms which lead to broad mesophases, low viscosities and large dielectric anisotropies further improve the performance of actively and passively addressed, high information content liquid crystal displays. Some recent developments, such as operation of supertwisted nematic displays with not only linear, but also circularly polarized light, are included. A recently presented, efficient liquid crystal colour projection concept, whose functional elements, i.e. polarizers, filters and modulators, consist entirely of liquid crystal devices, is reviewed. Its circular polarizers and filters are made up of novel, negative dielectric anisotropic cholesteric liquid crystals designed such that, dislocation-free, optically uniform, planar textures result from electric field alignment. Novel, non-linear optical ferroelectric liquid crystals which exhibit very large and stable second order harmonic coefficients d₂₂ = 5 pm V^-1 have the potential to be used in integrated optical devices, such as frequency converters and Pockels modulators. Photopolymerization of polymer-coated substrates with linearly polarized light is shown to induce anisotropic, uniaxial orientation of the polymer side chains without mechanical treatment. The resulting anisotropic dispersive surface interaction forces align adjacent liquid crystal molecules parallel. This new, photoinduced liquid crystal aligning technique renders the generation of azimuthal director patterns possible. It opens up interesting possibilities for realizing new optical and electro-optical devices, including hybrid and stereo liquid crystal displays.     

Apolar 2-alkoxyalkoxy-substituted nematic liquid crystals

The synthesis is reported of a series of apolar nematic liquid crystals incorporating an alkoxyalkoxy chain attached in a terminal position to the molecular core. The dependence of the mesomorphism and phase transition temperatures on the nature of the terminal chain with one, two or three oxygen atoms was studied. Some compounds with a completely alicyclic molecular core and a terminal 2-methoxyethoxy chain exhibit a nematic phase with a low melting point, birefringence and viscosity and a relatively high clearing point in the absence of smectic phases. They do not to absorb light in the near UV and may be useful as components of UV-stable nematic mixtures for use in photoluminescent liquid crystal displays. The presence of the methoxyethoxy chain leads to a relatively large dipole moment perpendicular to the molecular long axis.     

A simple method to measure the twist elastic constant of a nematic liquid crystal

We demonstrate a simple method for measuring the twist elastic constant (K₂₂) of a nematic liquid crystal (LC). By adding some chiral dopant to an LC host, the LC directors rotate 180° in a homogeneous cell, which is known as 180° super-twisted nematic (STN) cell. By preparing two such STN cells with different chiral concentrations and measuring their Fréedericksz threshold voltages, we can obtain the K₂₂ and helical twisting power simultaneously. In the whole process, there is no need to measure the pitch length. Our obtained K₂₂ values agree well with those reported by using other methods.     

Physical properties of chlorinated liquid crystals

Dielectric, optical and electro-optical properties of four chlorinated nematic liquid crystal compounds and a eutectic mixture were characterized. Some chlorinated liquid crystals are found to exhibit a wide nematic range, modest dielectric and optical anisotropies, low viscosity and small UV absorption. Potential application of mixtures containing chlorinated liquid crystals for information displays in the visible spectral region is foreseeable.     

Apolar 2‐alkoxyalkoxy‐substituted nematic liquid crystals

The synthesis is reported of a series of apolar nematic liquid crystals incorporating an alkoxyalkoxy chain attached in a terminal position to the molecular core. The dependence of the mesomorphism and phase transition temperatures on the nature of the terminal chain with one, two or three oxygen atoms was studied. Some compounds with a completely alicyclic molecular core and a terminal 2‐methoxyethoxy chain exhibit a nematic phase with a low melting point, birefringence and viscosity and a relatively high clearing point in the absence of smectic phases. They do not to absorb light in the near UV and may be useful as components of UV‐stable nematic mixtures for use in photoluminescent liquid crystal displays. The presence of the methoxyethoxy chain leads to a relatively large dipole moment perpendicular to the molecular long axis.     

Rigid rod molecules as liquid crystal thermosets. II. Rigid rod esters

Nine rigid rod ester monomers endcapped with maleimide, nadimide, and methylnadimide groups were prepared and studied by DSC and hot stage polarized light microscopy. All of the monomers showed thermotropic nematic liquid crystalline phases and could be thermally crosslinked in the nematic phase. The nematic texture was maintained in the crosslinked solid state. The nematic phase range was enlarged by B-staging the monomeric compounds. Heating the monomers for a short period of time in the nematic phase lowered the crystal to nematic transition temperatures and increased the nematic to isotropic transition temperatures. A nonequilibrium phase diagram was proposed to explain the melting behavior of these reactive liquid crystal thermoset materials.     

The relationship between formation kinetics and microdroplet size of epoxy-based polymer-dispersed liquid crystals

Polymer films containing dispersions of liquid crystal microdroplets have considerable potential for use in displays and other light control devices. These polymer-dispersed liquid crystal (PDLC) films operate by electric field control of light scattering, rather than by polarization control as in the case of twisted nematic systems. The scattering characteristics of the PDLC films are determined by the refractive indices of the polymer and liquid crystal and by the size of the microdroplets. We have found that it is possible to regulate the microdroplet size by controlling the droplet formation rate (i.e. the cure kinetics of the film). Using calorimetry and scanning electron microscopy, we determined the influence of cure kinetics on microdroplet size for epoxy-based PDLCs. We found that droplet size increased with increasing cure time constant. However, the relationship changed as cure temperature was varied, perhaps as a result of competing cure processes. We also determined the phase behaviour of the epoxy-based PDLCs. The liquid crystal acted as a plasticizer, depressing the glass transition temperature of the PDLC samples slightly below that of the pure epoxy. The temperature and enthalpy of the nematic to isotropic transition of the liquid crystal material in the microdroplets were both functions of cure temperature. From the transition enthalpy it was possible to estimate a, the fraction of liquid crystal contained in the droplets; we found that a decreased with increasing cure temperature, presumably as a result of greater liquid crystal solubility in the epoxy matrix at higher temperatures.     

A detailed derivation of extended Jones matrix representation for twisted nematic liquid crystal displays

A detailed derivation of the extended Jones matrix representation for twisted nematic liquid crystal displays at oblique incidence (which was previously published by the author) is given. It is shown that this representation reduces to the well-known ordinary Jones matrix representation at normal incidence.     

一种带肉桂酸酯基的聚酰亚胺液晶光定向材料研究

利用双酚A二胺单体(BISDA)与4,4-′(六氟异丙基)-双邻苯二甲酸酐(6FDA)的缩聚反应,制备了含有侧羟基的先驱聚合物PI-OH.通过PI-OH与肉桂酰氯的官能化反应,得到接有肉桂酸酯感光侧基的双酚A型聚酰亚胺PI-CI.用红外光谱(FTIR)、氢核磁共振(1H-NMR)分析、热分析(DSC)等方法表征了上述聚合物的结构和热性能.利用紫外-可见光谱(UV-Vis)对PI-CI的感光性能进行了研究.在线偏振紫外光辐照下,上述聚合物膜表现出二色向性.二向色性的强弱随光照能量的变化存在最大值.经线性偏振紫外光(LPUV)辐射后的PI-CI薄膜能诱导液晶盒中液晶分子发生均匀的定向沿面排列.上述实验表明,该聚酰亚胺是一类具有优良性能的潜在液晶光定向材料.     

Polymer-dispersed liquid crystals From the nematic curvilinear aligned phase to ferroelectric films

Polymer-dispersed liquid crystals (PDLC) are widely used for electro-optic applications such as flexible displays, privacy windows or projection displays. Besides these applications, the confinement of a liquid crystal to small cavities is of fundamental interest. The present paper contains a review of the work on nematic and cholesteric PDLCs. Moreover, some very recent developments are summarized such as the use of ferroelectric liquid crystals for PDLC applications.     

STUDY ON THE PHASE TRANSITION KINETICS OF THERMOTROPIC LIQUID CRYSTALLINE AROMATIC-ALIPHATIC COPOLYESTER

The phase transition kinetics of thennotropic liquid crystalline aromatic-aliphatic regular copolyester: were studied by DSC. By means of Kissinger's method the kinetic equation and parameters including activation energy, rate order and preexponential factor for phase transition from nematic to isotropic were obtained. The activation energy from crystal to nematic was also presented.     

Self-organization of disc-like molecules: chemical aspects

The hierarchical self-assembly of disc-shaped molecules leads to the formation of discotic liquid crystals. These materials are of fundamental importance not only as models for the study of energy and charge migration in self-organized systems but also as functional materials for device applications such as, one-dimensional conductors, photoconductors, light emitting diodes, photovoltaic solar cells, field-effect transistors and gas sensors. The negative birefringence films formed by polymerized nematic discotic liquid crystals have been commercialized as compensation foils to enlarge the viewing angle of commonly used twisted nematic liquid crystal displays. To date the number of discotic liquid crystals derived from more than 50 different cores comes to about 3000. This critical review describes, after an in-depth introduction, recent advances in basic design principles and synthetic approaches towards the preparation of most frequently encountered discotic liquid crystals.