光致变色WO3/4,4′-BPPOBp超晶格薄膜的制备

Layered WO3/4,4′-BPPOBp self-assemble mulitlayers (SAMs) films have been fabricated by polyelectrolytes (PEs) approach.The SAMs films with well-ordered superlattice structure and d-space of 0.695nm and good photochromic property have been studied by employing UV- visible,small angle XRD and XPS.     

光致变色WO3/4,4'-BPPOBp超晶格薄膜的制备

具有光致变色和电致变色特性的三氧化钨薄膜因其巨大的应用前景而倍受人们关注[1-4].其制备方法一般为物理沉积方法和化学沉积方法等.其中化学方法包括喷射裂解法[5],化学气相沉积法[6,7],电化学沉积法[8]和溶胶凝胶法[9]等.利用超分子化学自组装技术构建用有机组分调控的光致变色纳米超晶格薄膜材料,是研制光致变色功能薄膜材料的新方法.本文采用溶液中相反电荷聚电解质超分子自组装的方法(ＰＥｓ法)[10],制备了ＷＯ3/4,4′ＢＰＰＯＢｐ超晶格薄膜.采用紫外可见吸收光谱和小角Ｘ射线衍射谱对薄膜的结构和分子的排列方式进行了研究.1　实验…     

WO3/4,4′-联苄胺光致变色超晶格薄膜的研究

无机-有机超晶格薄膜材料的制备以及性质研究是目前国际上的研究热点.基于超分子化学自组装原理,利用自组装技术构建含有有机分子的光致变色纳米超晶格薄膜材料,是一种研制光致变色功能薄膜材料的新方法.此项研究能够为研制变色响应速度快的、稳定性好的、变色可调控的光致变色器件奠定基础,具有深远的意义和重要的科学价值.本文采用溶液中相反电荷聚电解质自组装的方法(PEs法)[1],制备了WO3/4,4′-联苄胺超晶格薄膜;采用紫外可见吸收光谱和小角X-射线衍射谱对薄膜的层状结构和分子的排列方式进行了研究.     

WO_3/4,4'-联苄胺光致变色超晶格薄膜的研究

无机 -有机超晶格薄膜材料的制备以及性质研究是目前国际上的研究热点。基于超分子化学自组装原理 ,利用自组装技术构建含有有机分子的光致变色纳米超晶格薄膜材料 ,是一种研制光致变色功能薄膜材料的新方法。此项研究能够为研制变色响应速度快的、稳定性好的、变色可调控的光致变色器件奠定基础 ,具有深远的意义和重要的科学价值。本文采用溶液中相反电荷聚电解质自组装的方法 ( PEs法 ) [1] ,制备了 WO3/4,4′-联苄胺超晶格薄膜 ;采用紫外可见吸收光谱和小角 X-射线衍射谱对薄膜的层状结构和分子的排列方式进行了研究。1　实验部分1.1　…     

Na0.33WO3溶胶及薄膜的制备与光致变色性质研究

无机光致变色材料在图像显示、光记录、信息存储和光转换方面有着巨大的潜在应用前景,引起了材料工作者的广泛重视[1￣3]。氧化钨是一种重要的无机光致变色材料,目前对氧化钨的研究多以无定     

草酸诱导合成WO3粉体与其光致变色性质

采用草酸有机诱导在水热条件下制备了形貌新颖的WO3粉体, 使用XRD, SEM, BET等手段进行结构和形貌表征, 并利用紫外-可见光谱仪(UV-Vis)及测色计对所制备的样品进行光致变色性能测试. 结果表明, 合成的WO₃粉体仍为六方相, 以草酸为诱导剂合成的粉体由大小及形状较为均匀的梭形组成, 颗粒长在200~300 nm之间, 宽在30~50 nm左右, 长宽比为4~10之间, 这种特殊的形貌改善了粉体对激发光源的吸收能力, 从而提高了合成的WO₃粉体的光致变色性能.     

光致变色的PW12/1,10DAD自组装超晶格多层膜

本文报道了在固体基底表面上用PE方法连续自组装沉积PW₁₂和1,10-DAD分子,构建了PW₁₂/1,10-DAD自组装多层膜.紫外-可见吸收、X射线衍射等分析结果表明此多层膜有好的超晶格结构,层间距为3.19nm.与真空蒸镀WO₃薄膜相比,PW₁₂/1,10-DAD自组装多层膜表现出更好的光致变色特性.     

WO3-TiO2薄膜型复合光催化剂的制备和性能

采用溶胶-凝胶法在多孔钛片上制备了WO     

空心介孔WO3球的制备及光催化性能

采用喷雾干燥法制备中空偏钨酸铵球,通过调整热处理温度制备空心介孔WO3球。结果表明:具有Keggin结构的[H2W12O40]6-金属簇的破坏温度区间为417~439℃;在热处理温度为500、550℃,仍有少量的铵根和结合水没有分解,除了WO3外,还存在(NH4)0.06WO3(H2O)0.11;当热处理温度在600℃以上时,偏钨酸铵完全分解为WO3;热处理温度为700℃,保温时间为2h,得到空心介孔WO3球。其形成机理为:空心的偏钨酸铵球,在热处理过程中由于各亚晶的位向不一致,各亚晶沿着[002]晶向择优生长,亚晶形成狭长颗粒,从而在空心球表面形成了介孔;但当热处理温度为800℃,保温时间为2 h,晶粒与晶粒之间通过合并而长大,孔道也随之消失;空心介孔WO3球具有良好的光催化效果,500 W高压汞灯照射150 min甲基蓝的降解率为65.9%。     

六方相WO3纳米带的制备与表征

以Na2WO4、K2SO4和H2C2O4为原料,采用两步水热合成法制备了六方相WO3纳米带.首先,在探索pH值、K2SO4加入量、反应温度和时间以及表面活性剂等因素对WO3纳米带的前驱物钨酸盐形貌的影响后,给出了前驱物钨酸盐纳米带的合成条件,并讨论了纳米带的形成机理;然后,在180℃的水热条件下对前驱物再处理48 h获得六方相WO3纳米带.测试结果表明,WO3纳米带的形貌保持较好,宽度在100～300 nm间,长度可达数微米,沿纳米带长轴方向为[001]方向.     

WO3/g-C3N4异质结催化剂的制备及其氧化脱硫性能

以尿素和钨酸铵为原料采用浸渍法制备了金属氧化物三氧化钨（WO₃）与石墨相氮化碳（g-C₃N₄）异质结复合材料WO₃/g-C₃N₄。采用XRD、UV-vis、SEM、PL和XPS表征手段考察了催化剂的理化性质,发现WO₃与g-C₃N₄存在较好的相互作用和电子转移,保证了WO₃/g-C₃N₄本身所具有较高的氧化脱硫活性。以WO₃/g-C₃N₄作为催化剂,过氧化氢异丙苯为氧化剂,考察其光催化氧化脱硫性能,在反应温度80℃,O/S物质的量比为3.0的反应条件下,反应180 min,二苯并噻吩（DBT）转化率可以达到72.79%。通过游离基捕获实验,发现超氧自由基（·O₂^-）、电子（e^-）、羟基自由基（·OH）起到了促进反应速率的作用,并对该体系的反应机理进行了探讨。     

Solid Solutions of WO3into Zirconia in WO3-ZrO2 Catalysts

Catalysts in the WO₃-ZrO₂ system were produced by coprecipitation of aqueous solutions of zirconium oxynitrate and ammonium metatungstate. Samples were characterized by X-ray powder diffraction, thermogravimetry, and refinement of their crystalline structures with the Rietveld method. This coprecipitation gave rise to solid solutions of tungsten oxide into zirconia; the initial phase was amorphous and crystallized into two tetragonal crystalline phases, T1 and T2, when samples were annealed at 560°C. The main difference between both phases was the oxygen position along the c axis. In the phase with higher symmetry, T2, an oxygen atom was at one-half of the unit cell, 0.50(2), producing flat crystallite surfaces perpendicular to the c axis, while in the phase with the lower symmetry, T1, it was at 0.447(2), and gave rise to rough crystallite surfaces parallel to (100) planes. The interpenetrating tetrahedra forming the representative polyhedron of the crystalline structure were almost nondeformed in the phase with higher symmetry, because all Zr-O atom bond lengths were very similar. As the annealing temperature of the sample was increased, the dissolved tungsten atoms in the phase with higher symmetry segregated to the crystallite's surface.     

制备方法对WO3/ZrO2结构的影响

WO3/ZrO2 catalysts prepared from Zr(OH)4 and crystallized ZrO2 have been characterized by means of XRD, LRS (qualitative and quantitative), and the specific sufrace area has been measured. The influence of the preparation method, the contents of WO3 in the samples and the calcination tempearture on the specific surface areas of the samples, the phase of support and the structural states of active component has been studied. The results show: (1) WO3 can disperse on ZrO2 as a monolayer; (2) WO3 dispersed on Zr(OH)4 as a monolayer retards the crystalline growth of the support on calcination, makes it crystallizing into a metastable tetragonal modification, and prevents the inter- crystalline sintering between the crystallites of ZrO2. These factors would result in an increase in the specific surface area of WO3／ZrO2 prepared from Zr(OH)4. As the content of WO3 in the sample comes up to its monolayer capacity, this effect is displayed most fully. A chemical reaction can occur between WO3 and Zr(OH)4 (or the tetragonal ZrO2) at a high temperature(800℃),producing some superacid sites on the surface. By these views, the main experimental facts published in the literatures can been interpreted satisfactotily.     

Crystallographic shear in the Nb2O5WO3 and Ta2O5WO3 systems

Crystallographic shear (CS) phases occurring in the Nb₂O₅WO₃ and Ta₂O₅WO₃ systems near to WO₃ were characterized by X-ray diffraction and high-resolution transmission electron microscopy. The Nb₂O₅WO₃ samples were heated at 1600K. They contained ordered {104} and {001} CS planes and wavy CS which were composed of intergrowths of {104} and {001} CS segments. The composition range over which the {104} CS series extended was from (Nb,W)O_2.954 i.e., (Nb,W)₆₅O₁₉₂, to (Nb,W)O_2.942, i.e., (Nb,W)₅₂O₁₅₃. The composition range over which the {001} CS series extended was from (Nb,W)O_2.9375, i.e., (Nb,W)₁₆O₄₇ to (Nb,W)O_2.875, i.e., (Nb,W)₈O₂₃. The Ta₂O₅WO₃ samples were prepared at 1593, 1623, and 1672K. At lower temperatures ordered {103} CS phases were found, with a composition range extending between (Ta,W)O_2.960, i.e., (Ta,W)₅₀O₁₄₈, to (Ta,W)O_2.944, i.e., (Ta,W)₃₆O₁₀₆. At 1673K ordered {103} CS phases occurred, as did wavy CS composed of intergrowths of {103} and {104} CS segments.     

WO3/YF3:Eu3+复合纳米材料的制备与发光性能

采用直接沉淀法制备了WO_3/YF_3∶Eu~(3+)复合纳米材料,并对其结构、组成、形貌和发光性能进行了研究。XRD分析表明:复合纳米材料由纳米粒子WO3和结晶良好的正交晶系的YF3∶Eu~(3+)组成。SEM照片表明:片状WO3颗粒表面沉积了分散性较好、粒径均匀(尺寸为10~50 nm)的YF3∶Eu3纳米颗粒。荧光光谱分析表明:该复合纳米材料具有良好的发光性,以593 nm附近的5D0→7F1磁偶极跃迁为最强发射峰,与纯的YF3∶Eu~(3+)相比WO_3/YF_3∶Eu~(3+)发光强度明显增强,表明具有表面等离子共振效应的WO3纳米粒子对壳层的YF3∶Eu~(3+)起到发光增强作用。     

Preparation and photoelectrocatalytic activity of a nano-structured WO3 platelet film

A tungsten trioxide (WO₃) film was prepared by calcination from a precursor paste including suspended ammonium tungstate and polyethylene glycol (PEG). The ammonium tungstate suspension was yielded by an acid-base reaction of tungstic acid and an ammonium solution followed by deposition with ethanol addition. Thermogravimetric (TG) analysis showed that the TG profile of PEG is significantly influenced by deposited ammonium tungstate, suggesting that PEG is interacting strongly with deposited ammonium tungstate in the suspension paste. X-ray diffraction (XRD) data indicated that the WO₃ film is crystallized by sintering over 400 °C. The scanning electron microscopic (SEM) measurement showed that the film is composed of the nano-structured WO₃ platelets. The semiconductor properties of the film were examined by Mott-Schottky analysis to give flat band potential E_FB=0.30 V vs. saturated calomel reference electrode (SCE) and donor carrier density N_D=2.5×10²² cm⁻³, latter of which is higher than previous WO₃ films by two orders of magnitude. The higher N_D was explained by the large interfacial heterojunction area caused by the nano-platelet structure, which apparently increases capacitance per a unit electrode area. The WO₃ film sintered at 550 °C produced 3.7 mA cm⁻² of a photoanodic current at 1.2 V vs. SCE under illumination with a 500 W xenon lamp due to catalytic water oxidation. This photocurrent was 4.5-12.8 times higher than those for the other control WO₃ films prepared by similar but different procedures. The high catalytic activity could be explained by the nano-platelet structure. The photocurrent was generated on illumination of UV and visible light below 470 nm, and the maximum incident photon-to-current conversion efficiency (IPCE) was 47% at 320 nm at 1.2 V. Technically important procedures for preparation of nano-structured platelets were discussed.