Neutron activation analysis of asbestos from Canada

Concentrations of Al, Au, Br, Ce, Cl, Co, Cr, Fe, K, La, Mg, Mn, Na, Ni, Sb, Sc, Sm, Srm and V were determined in 6 samples of asbestos from Canada. They were equal to (in ppm): Al 1660–3430; Au 0.03–0.04; Br 3.1–11.7; Ce 1.7–4.8; Cl 116–331; Co 35–83; Cr 200–2060; Fe 29300–42200; K 125–867; La 0.28–1.03; Mg 24–25.9%; Mn 418–545; Na 364–1610; Sb 0.65–1.46; Sc 3.73–5.57; Sm 0.09–0.3; Sr 26.7–41.4; V 8.4–14.3. Five toxic elements were found in asbestos; Cr, Mn, Ni, Sb and V.     

Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.     

Study of hair element content from an urban Bulgarian population using NAA assessment of environmental status

In this preliminary study, scalp hair samples from 36 individuals resident in Sofia, Bulgaria, were analysed and Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, F, Fe, Hg, I, K, La, Mg, Mn, Mo, Na, Ni, Rb, S, Sb, Sc, Se, Sn, Sr, Ti, V, W, and Zn were determined. Instrumental neutron activation analysis (INAA) methods were used. Three washing procedures.: distilled-deionised water; acidacetone-water; and Triton X-100 detergent-water, showed a variable elemental change strongly dependent on the procedure used. More than 18 elements (Al, As, Ba, Ca, Ce, Cl, Co, Cs, F, Fe, I, K, La, Mo, Na, Ni, Sb, Sc, Sr and V) were easily removed by water-washing. Triton X-100 detergent was more effective in removing Ag, As, Au, Cl, Cs, K, Na and Rb; but not Hg. Only S and Zn were strongly incorporated in the hair structure (less than 10% being removable by any washing technique). There is no significant age correlation with any element between the various hair treatment groups. Elevated cadmium levels were found in the hair of smokers (0.711–4.913 g/g Cd) compared with nonsmokers (0.568–2.681 g/g Cd). Comparison of the elemental data for distilled water-washed hair and studies from Oxford, England and Hastings, and Hastings, New Zealand (using the same INAA method) revealed interesting variations dependent on local industrial and nutritional factors.     

Trace element determination in seawater by ICP-SFMS coupled with a microflow nebulization/desolvation system

Direct and simultaneous determination of Al, Ag, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sb, U, V and Zn in diluted (1:10 v:v) seawater from the Antarctic Ocean and the Venice Lagoon at the ng mL^–1 and pg mL^–1 level has been performed by using an inductively coupled plasma sector field mass spectrometer (ICP-SFMS). Samples were analysed by using a PFA microflow nebulizer coupled with a desolvation system or a PFA microflow nebulizer coupled with a Teflon spray chamber, respectively. Measurements were carried out at low (LR, m/m=300), medium (MR, m/m=3,000) and high (HR, m/m=7,500) resolutions depending on the studied isotope. To avoid contamination, sample pre-treatment was carried out in a clean laboratory equipped with a Class 100 vertical laminar flow hood. Concentration ranges (minimum–maximum in ng mL^–1) found in the Antarctic seawater samples (in depth profiles) were: Ag 0.0004–0.0018, As 0.69–1.32, Cd 0.031–0.096, Co 0.018–0.065, Cr 0.18–0.46, Cu 0.04–1.58, Fe 0.13–1.63, Mn 0.02–0.12, Mo 5.97–12.46, Pb 0.007–0.074, Sb 0.033–0.088, U 0.5–1.9, V 0.6–2.5 and Zn 0.16–0.80. Concentration ranges (min–max in ng mL^–1) found in the Venice Lagoon water samples (temporal profile from a benthic chamber experiment) were: Al 0.24–0.61, Ag 0.007–0.031, As 1.42–2.27, Cd 0.050–0.182, Co 0.440–1.461, Cr 0.15–0.34, Cu 0.81–2.46, Fe 0.25–1.66, Mn 11.6–31.7, Mo 6.50–10.6, Pb 0.047–0.225, Sb 0.240–0.492, U 1.7–3.3, V 1.3–2.8 and Zn 5.20–21.5. The detection limits range between 0.06 pg mL^–1 for Ag and U to 15 pg mL^–1 for Fe. In order to check the accuracy of the analytical procedure, measurements of the trace elements in a certified reference material (coastal Atlantic seawater, CASS-4-NRCC) were compared with the certified values. In addition, the results from the Antarctic and Venice Lagoon samples were compared with those obtained by using different analytical techniques.     

Verfahren zur Spurenanalyse aus metallischen Proben

Zusammenfassung Ein neues lösungsspektrographisches Zerstäubungsverfahren wird beschrieben, bei dem die Lösung so zerstäubt wird, daß sie die Graphitelektroden nicht berührt. Mit diesem Verfahren könnten 10^–3 bis 10^–5 % Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V und Zr in Eisen und Stahl bestimmt werden.Zur Bestimmung von Verunreinigungen oder Einschlüssen in Stahl wird ein spektrographisches Verfahren mit Preßlingselektroden empfohlen, das nur 0,1–1 mg Rückstand benötigt. Oxide von Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn und Zr konnten bis herab zu etwa 10^–7 g erfaßt werden.

---

Methods for the determination of trace elements from metallic samples

The principles of a new spectrographical atomizing-method of solution are described. The solution has to be atomized into a gap without contacting the surface of the graphite electrodes. In this way the exact determination of 10^–3 to 10^–5 % of Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V and Zr in iron and steel is possible.The microanalytical determination of impurities or inclusions in steel has been achieved by a spectrographical method with briquette electrodes. The necessary amount of isolation residue is only 0.1–1 mg. The oxides of Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn and Zr can be accurately determined by this procedure. The limit of determination is about 10^–7 g.

     

Elemental analysis of human placenta by neutron irradiation and gamma-ray spectrometry (standard,prompt and fast-neutron)

Human placental tissue from 100 hospitalized deliveries were analysed for Ag, Al, As, Au, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cs, Cu, F, Fe, I, Hg, K, La, Mg, Mn, Mo, Na, Ni, Rb, S, Sb, Sc, Se, Sn, Sr, Ti, V, W and Zn using a combination of pre-chemical separation of sodium with hydrated antimony pentoxide and instrumental neutron activation analysis. Boron and Si values were determined using prompt gamma-ray and fast-neutron techniques respectively. Analysis of NBS-SRM Bovine Liver 1577 and a pooled standard placental tissue for 33 elements showed a good agreement with most coefficients of variation less than or equal to 15%, and recoveries of 91–104%. Symmetrical distributions, were obtained for all elemental placental values. Only Cd(–) and Zn(+) showed statistically significant correlations with birth weight, gestational age and placental weight. The influence of cigarette smoking is considered a major factor in producing elevated cadmium levels in the placental tissue of smokers and passive smokers, and hence lower birth weights.     

An indirect study of air pollution by neutron activation analysis of snow

Al, As, Br, Cd, Ce, Cl, Co, Cs, Cu, Fe, Hg, K, La, Mg, Mn, Mo, Na, Sb, Sc, Sr, Ti, V and Zn were determined in the soluble and insoluble fractions of snow which was collected at 6 differents sites in the Montreal area. From these data the variability coefficients and the enrichment factors were calculated and the probable sources of each element are discussed. The overall concentrations found in the snow were compared with the concentrations of these elements in the air sampled in the same area by high volume samplers. From these, the snow-out ratios for Cr, Cu, Fe, Mn, V and Zn and their mean were calculated. They are equal to 3338, 3389, 2322, 526, 563, 2603 and 2913 m³/kg respectively.     

Determination of 21 elements by INAA for certification of SRM 1570a,Spinach

Analyses for certification have been made by instrumental neutron activation analysis (INAA) for the determination of 21 elements in the National Institute of Standards and Technology (NIST) Spinach renewal reference material, SRM 1570a. Elements determined included ones with short halflife products (Al, V, Ca, Mg), intermediate halflife products (Mn, Na, K, La), and long halflife products (Ba, Co, Cr, Cs, Eu, Fe, Rb, Sb, Sc, Se, Sr, Th, and Zn). For the first time a new robotic sample changer was used in the counting of long halflife indicator isotopes for certification of an SRM. Uncertainties obtained averaged±1.80% for the four major and minor constituents (Ca, K, Mg, Na); ±3.14% for elements with concentrations from 1 to 400 mg/kg (Al, Ba, Cr, Fe, Mn, Rb, Sr, and Zn); and±8.31% for the ultra trace elements (<1 mg/kg) (Co, Cs, Eu, La, Sb, Sc, Se, Th, and V).     

用ICP研究鹿科动物骨质疏松症的微量元素特征

鹿科动物的骨质疏松症是近几年出现的一种疾病，它影响鹿的生长发育和繁殖，病重者死亡。我们采集梅花鹿和白唇鹿的毛，血样，用低温灰化方法和温法消解处理样品，用ＩＣＰ分析了毛，血清中微量元素的含量。病梅花鹿毛样中Ｍｇ，Ａｌ，Ｃａ，Ｔｉ，Ｆｅ，Ｃｕ，Ｚｎ的含量比正常组高，Ｔｉ，Ｃｕ，Ｚｎ的偏差率大于１５％，而Ｓｉ，Ｍｎ，Ｐ，Ｐ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ比正常组低，Ｖ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ存在...     

Instrumental neutron activation analysis of the hair of metallurgical workers

Hair samples were collected from 20 metallurgical workers (10 males and 10 females) and from 59 control subjects (32 males and 27 females), whose jobs do not indicate a specific occupational exposure. The concentrations of ten minor and trace elements (Al, Co, Cu, Fe, Mg, Mn, Sb, Se, V and Zn) were determined by instrumental neutron activation analysis (INAA). The statistical data distributions, the sex and age influences in these elemental concentrations and the average values obtained for the control group were compared with published data. The effect of occupational exposure to the metallic elements was reflected in elemental composition of hair by significant higher concentration levels of Al, Co, Cu, Fe, Mg, Mn, Sb, V and Zn in the hair of the exposed group, when compared with the control group.     

Radioactivation analysis of hair a means of biological monitoring of the environment

With the aim of indicating environmental pollution effects by heavy metals on humans using hair, nondestructive activation analysis was applied to 382 normal Japanese hair samples (background level). Elemental contents of hair could be determined for Ag, Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mg, Mn, Na, S, Sb, Sc, Se, Sm, Ti, V and Zn. As these elements in hair have wide concentration ranges, the differences in concentrations distribution between groups (sex, age, permanent treatment and regional difference) are discussed. A method for hair sampling is presented.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

57Fe Mössbauer spectroscopy of banded iron formations from eastern India

Samples of the mosses Hylocomium splendens and Pleurozium schreberi, collected in the summer of 1998, were used to study the atmospheric deposition of heavy metals and other toxic elements in the Chelyabinsk Region situated in the South Urals, one of the most heavily polluted industrial areas of the Russian Federation. Samples of natural soils were collected simultaneously with moss at the same 30 sites in order to investigate surface accumulation of heavy metals and to examine the correlation of elements in moss and soil samples in order to separate contributions from atmospheric deposition and from soil minerals. A total of 38 elements (Na, Mg, Al, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Rb, Sr, Zr, Mo, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Yb, Hf, Ta, W, Au, Th, U) in soil and 33 elements Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Br, Rb, Ag, Sb, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Au, Th, U) were determined by epithermal neutron activation analysis. The elements Cu, Cd and Pb (in moss samples only) were obtained by atomic absorption spectrometry. VARIMAX rotated principal component analysis was used to identify and characterize different pollution sources and to point out the most polluted areas.     

Multi-element analysis of blood for trace metals by neutron activation analysis

Fourteen elements can be rapidly determined in whole blood by the neutron activation analysis procedure described. Three of these (Ag, Cl, Se) are measured after a 10-s irradiation and eleven others (Al, Ba, Br, Ca, Cu, I, Mg, Mn, Mo, Rb, V) are determined by a 180-s irradiation of a 1-cm³ sample of whole blood after destruction of organic matter and removal of sodium by hydrated antimony pentoxide. A further 13 elements (As, Au, Co, Cr, Cs, Fe, Hg, K, Na, Ni, Sb, Sc, Zn) are determined after overnight irradiation in the SLOWPOKE reactor.     

Assessment of trace elements characteristics and human health risk of exposure to ambient PM2.5 in Hangzhou,China

A method for simultaneously determining the trace elements in particulate matter (PM) (PM2.5) by inductively coupled plasma mass spectrometry was established. The PM2.5-loaded filter samples were digested under the optimised conditions including a mixture of HNO₃–HCl–HF with ultrasonication proceeding at 70°C for 2 h. Recoveries of 90.83–103.33% were achieved for 20 elements (Co, Sr, Ag, Cd, Sb, La, Ce, Sm, W etc.) in NIST standard reference material 1648a (urban PM). PM2.5 samples were collected at urban site in Hangzhou from August 2015 to November 2015. PM2.5 concentrations of 15% sampling days exceeded the daily limitation and the mean concentrations of PM2.5 from August to November reached the 66.4% of the limitation. PM2.5 concentrations in summer were higher than that in autumn. The concentration of Zn was highest, following with Al, Pb, Mn, Cu and As. Significant enrichment was observed in Mn, Zn, Pb, Ag, V, Ni, Cu, As, Se, Hg, Co, Cd and W, which was probably induced by vehicular exhaust, oil and residual fuel combustion and industrial emissions. The daily mass concentrations of PM2.5 and elements fluctuated significantly. Rainfall could significantly reduce the concentration of Ti, Mn, Cu, Zn, As, Se, Hg, Sr, Ag, Cd, Sb, La, Ce, Sm and Pb, and the risk levels of carcinogenic elements and non-carcinogenic elements in rain day were significantly lower (43.7–81.4%) than those in non-rain day. The risk levels of Co, Cd and As could lead to adverse health outcomes through the respiratory system, which should deserve more attention, while the risk levels of Ni and non-carcinogenic elements (Hg, Mn, Cu, Zn, Pb, V) were under average risk acceptance.     

Determination of trace impurities in semi-conductor grade PCl3 and POCl3-A d.c. arc spectrochemical method

Summary A spectrochemical method for the determination of traces of Al, Co, Cu, Cr, Fe, Mn, Mg, Ni, Pb, Sb, Sn, Ti and V in semiconductor grade PCl₃ and POCl₃ has been developed. 25ml of the sample is evaporated in a stream of nitrogen and the residual phosphoric acid containing the impurities is treated with bismuth nitrate to co-precipitate the impurities on BiPO₄. The phosphate is spectrographically analysed employing the d.c. arc with Ga as the internal standard and LiF as the carrier. The range of concentration determined is 5–200 ppm and the precision of the method in terms of coefficient of variation is 9–20% for the different impurities.

---

Bestimmung von Spurenverunreinigungen in Halbleiter-Phosphortrichlorid und -Phosphoroxidchlorid — Ein spektralanalytisches Verfahren mit Gleichstrombogen

Zusammenfassung Ein Verfahren wurde ausgearbeitet zur Bestimmung von Spuren Al, Co, Cu, Cr, Fe, Mn, Mg, Ni, Pb, Sb, Sn, Ti und V in Halbleiter-PCl₃ und-POCl₃. 25 ml der Probe werden im Stickstoffstrom eingedampft und die zurückbleibende Phosphorsäure, die die Verunreinigungen enthält, wird mit Bismutnitrat behandelt, wobei die Verunreinigungen an BiPO₄ mitgefällt werden. Das Phosphat wird spektralanalytisch untersucht (Gleichstrombogen, Ga als als innerer Standard, LiF als Träger). Die Elemente wurden im Bereich von 5–200 ppm analysiert. Der Variationskoeffizient lag zwiwchen 9 und 20%.

     

Major elements as possible factors of trace element urban pedochemical anomalies

The relationship between real total contents of the major elements Na, Mg, Al, Si, P, S, K, Ca, Ti, Fe and the trace elements Ag, As, B, Ba, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sn, V, U, Zn in topsoil from the central part of Vilnius is analysed. The amounts of most elements were determined by energy-dispersive X-ray fluorescence, while amounts of Ag, B, Co were measured by optical atomic emission spectrophotometry. Two factors were distinguished according to major elements: anthropogenic (A) including Ca, Mg, Fe, P, S and clayey (C) including K, Al, Ti. Boron, Mn, Cr and U are significantly correlated with members of both factors, Sb with none of them and other trace elements either with all (Cu, Zn, Pb, Se, Ba, Ni, Co) or with separate (V, Ag, Sn, Mo, As) members of the A-factor. Only B, Mn, Cr, U (partly their additive index Z1) are influenced by the C-factor, while twelve other trace elements (also their additive index Z2) are influenced by the A-factor. The additive index Z of all 17 elements is also affected by the A-factor. Four groups of sites have been distinguished according to normal or higher contents of both factors. The majority of trace element anomalies are related to the sites affected by the A-factor.     

INAA of Some Fossil Samples from Romanian Sites

Instrumental neutron activation analysis was used to determine elemental contents of Elephas primigenius mammoth mandible bone and Pecten solarium shell fossils discovered in Romania during 1995–1996. In addition, calcareous sedimentary rock surrounding the shell fossil was analyzed. Concentrations of Al, As, Au, Ba, Br, Ca, Co, Cr, Cs, Fe, Hf, K, Mg, Mn, Na, Ni, Rb, Sb, Sc, Se, Sr, Th, U, V, Zn and the rare earth elements Ce, Eu, La, Lu, Nd, Sm, Tb, Yb were determined. The results are discussed and compared to the available data in the literature for similar fossils.     

Comparison of nondestructive proton and neutron activation: The case of biological samples

The capabilities of reactor neutron and 12 MeV proton activation were evaluted on samples of orchard leaves, beef liver and bovine liver. Based on γ-ray spectrometry, As, Ca, Cu, Fe, Mo, Pb, Sr, Ti, Zn and Zr at levels ranging from 2 to 20 900 ppm were detected following proton activation of 1 hour. Al, Br, Ca, Cl, Cu, Mg, Mn, Rb and V (ranging from 0.4 to 20 900 ppm) were measured by neutron activation (1 min irradiation). As, Ba, Br, Cr, Co, Fe, Hg, La, Na, Rb, Sb and Zn (ranging from 0.2 to 2400 ppm) were determined following a 14 h neutron irradiation. Although covering different elements, the two techniques are comparable in their scope, i. e. detection limits that can be achieved and number of elements that can be detected simultaneously.     

Determination of the elemental composition of copper and bronze objects by neutron activation analysis

A method for the elemental analysis of copper and bronze objects is described. Na, Co, Ni, Cu, Zn, As, Ag, Sn, Sb, W, Ir and Au are determined through instrumental neutron activation analysis. Mg, Al, V, Ti and Mn are determined after chemical separation using anionic exhange. The detection limits for a number of other elements are also given. Results for NBS standard reference materials are presented and the results compared with the recommended values. The agreement is good. The results of the analysis of five ancient bronze and two copper objects are presented.