Thermal decomposition of the [Pt(NH3)4]2+ complex in NaX zeolite

The effect of the calcination procedure on the decomposition of the [Pt(NH₃)₄]²⁺ complex in a cesium-containing NaX zeolite was studied by thermal decomposition accompanied by mass spectrometry and diffuse reflectance spectroscopy, as well as electron paramagnetic resonance and infrared spectroscopy. The decomposition of the complex took place in two steps. Under oxygen, the [Pt(NH₃)₄]²⁺ complex was first converted into the [Pt(NH₃)₂]²⁺ complex in the first step, with predominant nitrogen release. In the second step, corresponding to the decomposition of the remaining two amine ligands, NO was also formed and adsorbed. Oxygen paramagnetic species were also observed. Under He, the decomposition also occurred in two steps with H₂ release.     

Influence of the chloride counterion on the redox reactivity of tetraammineplatinum(II) cation with octacyanotungstate(V) anion: Crystal structure of [Pt(NH3)4]2[W(CN)8]

The redox reaction between [Pt(NH₃)₄]²⁺ and [W(CN)₈]³⁻ in the presence of Cl⁻ anions in aqueous solution affords single crystals of [Pt^II(NH₃)₄]₂[W^IV(CN)₈] and [Pt^IV(NH₃)₄Cl₂]Cl₂. Trapped cyano ligands of [W(CN)₈]⁴⁻ rectangular antiprisms of D₂ point symmetry between parallel Pt(II) square planes show that the inner-sphere redox pathway is prohibited. The presence of Cl⁻ counterions enables the formation of [Pt(NH₃)₄Cl₂]Cl₂ as the product of the rare outer-sphere pathway of the oxidation of Pt(II) by [W(CN)₈]³⁻.     

Kinetic characterization of the interactions of trans-dichloro-platinum(IV) anticancer prodrugs and a model compound with thiosulfate

Sodium thiosulfate has been utilized as a rescuing agent for relief of the toxic effects of cisplatin and carboplatin. In this work, we characterized the kinetics of reactions of the trans-dichloro-platinum(IV) complexes cis-[Pt(NH₃)₂Cl₄], ormaplatin [Pt(dach)Cl₄] and trans-[PtCl₂(CN)₄]^2? (anticancer prodrugs and a model compound) with thiosulfate at biologically important pH. An overall second-order rate law was established for the reduction of trans-[PtCl₂(CN)₄]^2? by thiosulfate, and varying the pH from 4.45 to 7.90 had virtually no influence on the reaction rate. In the reactions of thiosulfate with cis-[Pt(NH₃)₂Cl₄] and with [Pt(dach)Cl₄], the kinetic traces displayed a fast reduction step followed by a slow substitution involving the intermediate Pt(II) complexes. The reduction step also followed second-order kinetics. Reductions of cis-[Pt(NH₃)₂Cl₄] and [Pt(dach)Cl₄] by thiosulfate proceeded with similar rates, presumably due to their similar configurations, whereas the reduction of trans-[PtCl₂(CN)₄]^2? was about 1,000 times faster. A common reduction mechanism is suggested, and the transition state for the rate-determining step has been delineated. The activation parameters are consistent with transfer of Cl⁺ from the platinum(IV) center to the attacking thiosulfate in the rate-determining step.     

The catalytic effect of transition metal-ion ammine complexes on the decomposition of hydrogen peroxide in the presence of Dower-50W resin in aqueous medium

Summary The kinetics of the catalytic decomposition of hydrogen peroxide was studied in the presence of Dowex-50W resin in the form of some transition metal-ion ammine complexes in an aqueous medium. The transition metal-ions, Co²⁺, Ag⁺, Cd²⁺ and Zn²⁺ were chosen in this study and the rate constants (per gram of dry resin) were evaluated at various resin weights in the 25–40°C range. A coloured compound (peroxo-metal complex), which formed at the beginning of the reaction in each case, was found to contain the catalytic active species. Probable mechanisms for the reactions are proposed. The activation energy and the change in the entropy of activation increased in the following sequence: [Ag(NH₃]₂]⁺< [Cd(NH₃)₆]²⁺<[Co(NH₃)₆]²⁺<[Zn(NH₃)₆]²⁺, which is also the probability sequence for the formation of the activated complex.     

Reaction of cyclohexanone with [NH4]+ under chemical ionization conditions. 1—formation of protonated unsubstituted imines

High resolution and metastable decomposition spectra of the ions [M + NH₄]⁺ (and [M + ND₄]⁺) formed by reaction of [NH₄]⁺ (and [ND₄]⁺) with cyclohexanone have been measured. The results provide evidence that the m/z 98 ion, which is abundant in the chemical ionization (NH₃) spectrum of cyclohexanone, is in fact composed of two isobaric ions: a protonated imine ion and the molecular ion of cyclohexanone. The former is formed by a mechanism analogous to that occurring in solution.     

Reaction of ferricytochrome c with the iron nitrosyl complex {Fe2[S(CH2)2NH3]2(NO)4}SO4 • 2.5H2O

By an example of cysteamine iron nitrosyl complex {Fe₂[S(CH₂)₂NH₃]₂(NO)₄}SO₄ ? 2.5H₂O (CAC) it was shown for the first time that the NO donor hydrolysis in the presence of ferricytochrome c (cyt c³⁺) affords the iron nitrosyl complex NO—cyt c³⁺. It was found that cyt c³⁺ can serve as a depot for NO evolved during the hydrolysis of CAC. In the presence of CAC, the rate of NO—cyt c³⁺ complex decomposition to NO and cyt c³⁺ depends on the molar ratio [cyt c³⁺]: [CAC] and at [cyt c³⁺]: [CAC] = 0.3 it was found to be lower than that in decomposition of CAC in the absence of cyt c³⁺. As a result, the total NO evolving process becomes 5.6 times more prolonged. The number of NO groups evolved from CAC can be determined by the reaction of CAC with cyt c³⁺ in the presence of ferricyanide: at most one NO group is evolved to a solution in the spontaneous hydrolysis of CAC (pH 7.0), and no less than three of them are evolved from oxidized CAC.     

Reactions of cisplatin hydrolytes, cis-[Pt(15NH3)2(H2O) 2]2+, with N-acetyl-L-cysteine

The reaction of cis-[Pt(¹⁵NH₃)2(H₂O) ₂] ²⁺ (3) with N-acetylcysteine [H₃accys] was investigated in aqueous solution. In this reaction, the ammine in the platinum complex formed was liberated. A mono-dentate sulfur-boundplatinum(II) product cis-[Pt(¹⁵NH₃)₂(H₂O)(H2accys-S)]⁺ (7) and six-membered che-late ring complex cis-[Pt(¹⁵NH₃)₂ (Haccys-S,O)] (8) were formed in solution. The dinuclear sulfur-bridged complex 9, giving a broad peak in ¹⁵N NMR, was also observed, but only present in very tiny amounts. The mass spectrometry (ES-MS) was undertaken from this re action, and the product detected was only the dinuclear sulfur bridged platinum species and species related to it by ammine loss.     

Reactions of Beryllium Halides in Liquid Ammonia: The Tetraammineberyllium Cation [Be(NH3)4]2+, its Hydrolysis Products,and the Action of Be2+ as a Fluoride‐Ion Acceptor

The first structural characterization of the text‐book tetraammineberyllium(II) cation [Be(NH₃)₄]²⁺, obtained in the compounds [Be(NH₃)₄]₂Cl₄ ? 17NH₃ and [Be(NH₃)₄]Cl₂, is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be₂(μ‐OH)(NH₃)₆]³⁺ and the cyclic [Be₂(μ‐OH)₂(NH₃)₄]²⁺ and [Be₃(μ‐OH)₃(NH₃)₆]³⁺ cations. The latter species was isolated as the compound [Be₃(μ‐OH)₃(NH₃)₆]Cl₃ ? 7NH₃. NMR analysis of solutions of BeF₂ in liquid ammonia showed that the [BeF₂(NH₃)₂] molecule was the only dissolved species. It acts as a strong fluoride‐ion acceptor and forms the [BeF₃(NH₃)]^? anion in the compound [N₂H₇][BeF₃(NH₃)]. The compounds presented herein were characterized by single‐crystal X‐ray structure analysis, ⁹Be, ¹⁷O, and ¹⁹F NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

Theoretical study of the electronic spectra of bi‐ and tri‐heteronuclear platinum complexes

The electronic structure and the spectroscopic properties of [Pt(NH₃)₄][Au(CN)₂]₂, [Pt(NH₃)₄][Ag(CN)₂]₂, [Pt(CNCH₃)₄][Pt(CN)₄], and [Pt(CNCH₃)₄][Pd(CN)₄] were studied at the HF, MP2, B3LYP, and PBE levels. In all the complexes, it was found that the nature of the intermetal interactions is consistent with the presence of a high‐ionic contribution (90%) and a dispersion‐type interaction (10%). The absorption spectra of these complexes were calculated by the single‐excitation time‐dependent (TD) method at the HF, B3LYP, and PBE levels. The [Pt(NH₃)₄][M(CN)₂]₂ (M ? Au, Ag) complexes showed a ¹(dσ* → pσ) transition associated with a metal–metal charge transfer. On the other hand, the [Pt(CNCH₃)₄][M(CN)₄] (M ? Pt, Pd) complexes showed a ¹(dσ* → π*) transition associated with a metal‐to‐metal and ligand charge transfer. The values obtained theoretically are in agreement with the experimental range. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

HPLC Method for the Determination of the Purity of K[Pt(NH3)Cl3], a Precursor of the Platinum Complexes with Cytostatic Activity

K[Pt(NH₃)Cl₃], a valuable precursor for the preparation of platinum complexes with cytostatic activity, e.g. satraplatin, picoplatin, LA-12 and cycloplatam, is currently prepared from cis-[Pt(NH₃)₂Cl₂] or K₂[PtCl₄] and these are the usual impurities in the final product. A simple, selective and sensitive HPLC-UV analytical method for the determination of the purity of K[Pt(NH₃)Cl₃] and the quantification of the impurities has been developed and validated. The platinum complexes present in the final product were separated on a strong base ion exchange column by the gradient elution with detection at 213 nm. Intra-assay precisions for the platinum complexes respective to their ions ([PtCl₄]^2?, [Pt(NH₃)Cl₃]^? and cis-[Pt(NH₃)₂Cl₂]) were between 0.1 and 2.0% (relative standard deviation); intermediate precisions were between 1.4 and 2.0% and accuracies were between 98.6 and 101.4%. Limits of detection of [PtCl₄]^2?, [Pt(NH₃)Cl₃]^? and cis-[Pt(NH₃)₂Cl₂] were 6 µg · ml^?1, 13 mg · ml^?1 and 5 µg · ml^?1 respectively, limits of quantification of [PtCl₄]^2?, [Pt(NH₃)Cl₃]^? and cis-[Pt(NH₃)₂Cl₂] were 51 µg · ml^?1, 55 mg · ml^?1 and 20 µg · ml^?1 respectively.     

Über Tetramminmetallchalkogenometallate

Zusammenfassung Es wird über die Darstellung sowie schwingungsspektroskopische und röntgenographische Untersuchung von Chromaten, Molybdaten, Wolframaten, Permanganaten und Perrhenaten der komplexen Kationen [Cu(NH₃)₄]²⁺, [Zn(NH₃)₄]²⁺ und [Cd(NH₃)₄]²⁺ berichtet. Die Strukturdaten sowie IR-Spektren werden diskutiert.

---

Tetramminmetallchalcogenometallates

The preparation, the vibrational spectra and structure data of chromates, molybdates, tungstates, permanganates and perrhenates of the complex cations [Cu(NH₃)₄]²⁺, [Zn(NH₃)₄]²⁺ and [Cd(NH₃)₄]²⁺ are reported. The structural data and the infrared spectra are discussed.

     

On Mixed-Valence Dinuclear PtII,PtIII Nucleobase Complexes Derived from cis-Diamineplatinum(II): Effect of steric bulk of amine ligands on the Pt-oxidation state

A series of closely related dinuclear (head-head) Pt^II complexes of general composition cis-[a₂PtL₂Pta′₂]²⁺ with a,a′ = NH₃ or CH₃NH₂ and L = 1-methyluracilate-N3,O4 (1-MeU) or 1-methylthyminate-N3,O4 (1-MeT) has been prepared and the solution behavior toward Ce^IV oxidation studied. The X-ray crystal structure of a representative example cis-[(CH₃NH₂)₂Pt(1-MeU)₂Pt(CH₃NH₂)₂](ClO₄)₂ · 0.5 H₂O ( 1b ), has been determined: Monoclinic, space group P2₁/c, a = 11.907(7) Å, b = 19.087(14) Å, c = 12.525(7) Å, β = 90.49(4)°, Z = 4. Oxidation of these diplatinum(II) complexes ([Pt^2.0]₂) with Ce^IV in aqueous solution to the corresponding diplatinum(III) species ([Pt^3.0]₂) proceeds via tetranuclear [Pt^2.25]₄ or dinuclear [Pt^2.5]₂ mixed-valence state compounds, depending on the nature of the a′ ligands: with a′ = NH₃, blue green [Pt^2.25]₄ forms, whereas with a′ = CH₃NH₂, purple [Pt^2.5]₂ represents the intermediate. This difference is interpreted in terms of differences in bulk between NH₃ and CH₃NH₂ ligands trans to the O(4) positions of the bridging nucleobases which influence the ability of dinuclear species to associate via the O(4)₂ Pt a₂′ faces.     

Wave mechanics - the first fifty years : edited by W.C. Price,S.S. Chissick and T. Ravensdale,Butterworths, London, 1973, pp. 435, price £12.00

The free NH₃ molecule and the [Zn(NH₃)₄]²⁺ ion were studied by the kinematic coupling approach. The pure effects of this coupling were found to be small, and some modifications had to be introduced in order to get a reasonable force field. The force constants deduced for the skeletal vibrations are comparable with those of a quasi-exact force field. Calculated frequencies for [⁶⁸Zn(NH₃)₄]²⁺ and [⁶⁴Zn(ND₃)₄]²⁺ are reported in addition to those of [⁶⁴Zn(NH₃)₄]²⁺. Mean amplitudes of vibration for [⁶⁴Zn(NH₃)₄]²⁺ are given.     

Force field for platinum binding to adenine

The antitumor drug cis-diamminedichloroplatinum(II) (cisplatin) binds preferentially to GpG and ApG sequences of DNA, forming N7,N7 intrastrand chelates. Molecular modeling of the intrastrand adducts have been handicapped, so far, by the lack of force-field data describing the Pt–guanine and Pt–adenine binding. We used ab initio calculations with relativistic pseudopotentials to evaluate three important parameters for the platinum–adenine model complex [Pt(NH₃)₃(Ade)]²⁺: (1) the force constant for the Pt? N7 bond bending out of the adenine plane; (2) the energy profile for the torsion about Pt? N7; (3) a set of fractional atomic charges that reproduce the ab initio potential for a number of space points placed around the adduct. A population analysis and comparative study on the tetrammine complex [Pt(NH₃)₄]²⁺ have shown that for platinum adenine is a better σ-donor than NH₃, but its capacity as a π-acceptor is weak. © 1993 John Wiley & Sons, Inc.     

Electronic structure and spectra of [Ru(NH3)5pyz]2+ and [(NH3)5Ru-pyz-Ru(NH3)5]4+

The electronic structure and spectra of [Ru(NH₃)₅pyz]²⁺ and [(NH₃)₅Ru-pyz-Ru(NH₃)₅]⁴⁺ are calculated by the INDO (CINDO-E/S) method. Changes in molecular orbitals, charge distributions, and bond order indices of the pyrazine molecule and [Ru(NH₃)₅pyz]²⁺ complex in the [(NH₃)₅Ru-pyz-Ru(NH₃)₅]⁴⁺ binuclear complex are analyzed. St. Petersburg State University. Translated fromZhurnal Strukturnoi Khimii, Vol. 35, No. 4, pp. 12–23, July–August, 1994. Translated by. O. Kharlamova     

PtII Coordination to N1 of 9‐Methylguanine: Why it Facilitates Binding of Additional Metal Ions to the Purine Ring

The preparation and X‐ray crystal structure analysis of {trans‐[Pt(MeNH₂)₂(9‐MeG‐N1)₂]} ? {3 K₂[Pt(CN)₄]} ? 6 H₂O ( 3 a ) (with 9‐MeG being the anion of 9‐methylguanine, 9‐MeGH) are reported. The title compound was obtained by treating [Pt(dien)(9‐MeGH‐N7)]²⁺ ( 1 ; dien=diethylenetriamine) with trans‐[Pt(MeNH₂)₂(H₂O)₂]²⁺ at pH 9.6, 60 °C, and subsequent removal of the [(dien)Pt^II] entities by treatment with an excess amount of KCN, which converts the latter to [Pt(CN)₄]^2?. Cocrystallization of K₂[Pt(CN)₄] with trans‐[Pt(MeNH₂)₂(9‐MeG‐N1)₂] is a consequence of the increase in basicity of the guanine ligand following its deprotonation and Pt coordination at N1. This increase in basicity is reflected in the pK_a values of trans‐[Pt(MeNH₂)₂(9‐MeGH‐N1)₂]²⁺ (4.4±0.1 and 3.3±0.4). The crystal structure of 3 a reveals rare (N7,O6 chelate) and unconventional (N2,C2,N3) binding patterns of K⁺ to the guaninato ligands. DFT calculations confirm that K⁺ binding to the sugar edge of guanine for a N1‐platinated guanine anion is a realistic option, thus ruling against a simple packing effect in the solid‐state structure of 3 a . The linkage isomer of 3 a , trans‐[Pt(MeNH₂)₂(9‐MeG‐N7)₂] ( 6 a ) has likewise been isolated, and its acid–base properties determined. Compound 6 a is more basic than 3 a by more than 4 log units. Binding of metal entities to the N7 positions of 9‐MeG in 3 a has been studied in detail for [(NH₃)₃Pt^II], trans‐[(NH₃)₂Pt^II], and [(en)Pd^II] (en=ethylenediamine) by using ¹H NMR spectroscopy. Without exception, binding of the second metal takes place at N7, but formation of a molecular guanine square with trans‐[(Me₂NH₂)Pt^II] cross‐linking N1 positions and trans‐[(NH₃)₂Pt^II] cross‐linking N7 positions could not be confirmed unambiguously, despite the fact that calculations are fully consistent with its existence.     

Studies of the reactions of thiocyanate ion with pentammine dinitrogen ruthenium(II) dibromide at different temperatures

The salts of the linkage isomers of thiocyanatopentammineruthenium(III) [Ru(NH₃)₅(NCS)]²⁺, [Ru(NH₃)₅(SCN)]²⁺ and dithiocyanatotetrammineruthenium(III) [Ru(NH₃)₄(NCS)₂]⁺ along with those of tetrathiocyanatodiammineruthenate(III) [Ru(NH₃)₂(SCN)₄]^? have been synthesized. The insoluble polymeric complex [Ru(NH₃)₂(SCN)₂]_n has also been prepared. The compounds have been characterized by chemical analyses, spectral (IR, UV and visible), magnetic susceptibility, conductivity, cyclic voltammetry and chromatography studies.     

Bimetallic single-source precursors [M(NH3)4][Co(C2O4)2(H2O)2]·2H2O (M = Pd, Pt) for the one run synthesis of CoPd and CoPt magnetic nanoalloys

All the steps of the proposed technique, from the synthesis of single-source precursors to the preparation of CoPd and CoPt nanoalloys, are described. The double complex salts (DCS) [M(NH₃)₄][Co(C₂O₄)₂(H₂O)₂]·2H₂O (M = Pd, Pt), which were synthesized by mixing solutions containing [M(NH₃)₄]²⁺ cations and [Co(C₂O₄)₂(H₂O)₂]²⁻ anions, have been used as precursors. The salts obtained were characterized by IR spectroscopy, thermal analysis, XRD and single crystal X-ray diffraction. The prepared compounds crystallize in the monoclinic (space group I2/m, M = Pd) and orthorhombic (space group I222, M = Pt) crystal systems. Thermal decomposition of the salts in helium or hydrogen atmosphere at 200-600 °C results in the formation of nanoalloys powders (random solid solution Co_0.50Pd_0.50 and chemically ordered CoPt). The size of the bimetallic particles varied from 5 to 20 nm. Order-disorder structural transformations in Co_0.50Pt_0.50 nanoalloys were studied. The magnetic properties of both chemically disordered Co_0.50Pd_0.50 and ordered CoPt clusters have also been measured.     

Synthese und Struktur von Ammin- und Amidokomplexen des Iridiums

Synthesis and Structure of Ammine and Amido Complexes of Iridium The reaction of (NH₄)₂[IrCl₆] with NH₄Cl at 300 °C in a sealed glass ampoule yields the iridium(III) ammine complex (NH₄)₂[Ir(NH₃)Cl₅], which crystallizes isotypically with K₂[Ir(NH₃)Cl₅] in the orthorhombic space group Pnma with Z = 4, and a = 1350.0(2); b = 1028.5(3); c = 689.6(2) pm. The reaction of (NH₄)₂[IrCl₆] with NH₃ at 300 °C, however, gives the already known [Ir(NH₃)₅Cl]Cl₂ beside a small amount of [Ir(NH₃)₄Cl₂]Cl₂. In pure form [Ir(NH₃)₅Cl]Cl₂ is obtained by ammonolysis of (NH₄)₂[Ir(NH₃)Cl₅] at 300 °C with NH₃. [Ir(NH₃)₄Cl₂]Cl₂ crystallizes triclinic (P1, Z = 1, a = 660,2(3); b = 680,4(3); c = 711,1(2) pm; α = 103,85(2)°, β = 114,54(3)°, γ = 112,75(2)°). The structure contains Cl^– anions and [Ir(NH₃)₄Cl₂]²⁺ cations with a trans position of the Cl atoms. Upon reaction of [Ir(NH₃)₅Cl]Cl₂ with Cl₂ one ammine ligand is eliminated yielding [Ir(NH₃)₄Cl₂]Cl, which is transformed to orthorhombic [Ir(NH₃)₄(OH₂)Cl]Cl₂ (Pnma, Z = 4, a = 1335,1(3); b = 1047,9(2); c = 673,4(2) pm) by crystallization from water. In the octahedral complex [Ir(NH₃)₄(OH₂)Cl]²⁺ the four ammine ligands have an equatorial position, whereas the Cl atom and the aqua ligand are arranged axial. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Cl₂ at 330 °C affords the tetragonal Ir^IV complex (NH₄)[Ir(NH₃)Cl₅] (P4nc, Z = 2, a = 702.68(5); c = 912.89(9) pm). Its structure was determined using the powder diagram. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Br₂ in water, on the other hand, gives (NH₄)₂[IrBr₆] crystallizing in the K₂[PtCl₆] type. Oxidation of (PPh₄)₂[Ir(NH₃)Cl₅] with PhI(OAc)₂ in CH₂Cl₂ affords the Ir^V amido complex (PPh₄)[Ir(NH₂)Cl₅].     

Synthese,Struktur und Thermolyse von NH4[Re3Br10]

Synthesis, Structure and Thermolysis of NH₄[Re₃Br₁₀] NH₄[Re₃Br₁₀] crystallizes as dark brown single crystals upon slow cooling of a hot, saturated hydrobromic-acid solution of [Re₃Br₉(H₂O)₂] after the addition of NH₄Br. The crystal structure (monoclinic, C2/m (Nr. 12); Z = 4; a = 1461.6(7), b = 1 085.6(4), c = 1030.3(7) pm, β = 92.63(4)°, V_m = 245.9(4)cm³/mol; R = 0.097, R_w = 0.043) contains [Re₃Br₁₂]^? units that share two common edges. These chains run along [010] and are held together by NH₄⁺ ions. Each NH₄⁺ is surrounded by eight Br^? from four different chains. The first step of the thermal decomposition at 290°C is the disproportionation to ReBr₃ (ReCl₃ type), rhenium metal and (NH₄)₂[ReBr₆]. Secondly, the internal reduction of (NH₄)₂[ReBr₆] at 390°C to rhenium metal takes place.