Direct fabrication and harvesting of monodisperse, shape-specific nanobiomaterials

A versatile "top-down" method for the fabrication of particles, Particle Replication In Nonwetting Templates (PRINT), is described which affords absolute control over particle size, shape, and composition. This technique is versatile and general enough to fabricate particles with a variety of chemical structures, yet delicate enough to be compatible with sophisticated biological agents. Using PRINT, we have fabricated monodisperse particles of poly(ethylene glycol diacrylate), triacrylate resin, poly(lactic acid), and poly(pyrrole). Monodisperse particle populations, ranging from sub-200 nm nanoparticles to complex micron-scale objects, have been fabricated and harvested. PRINT uses low-surface energy, chemically resistant fluoropolymers as molding materials, which eliminates the formation of a residual interconnecting film between molded objects. Until now, the presence of this film has largely prevented particle fabrication using soft lithography. Importantly, we have demonstrated that PRINT affords the simple, straightforward encapsulation of a variety of important bioactive agents, including proteins, DNA, and small-molecule therapeutics, which indicates that PRINT can be used to fabricate next-generation particulate drug-delivery agents.     

Assembly of colloidal particles by evaporation on surfaces with patterned hydrophobicity

Drops containing suspended particles are placed on surfaces of patterned wettability created using soft lithography; the drop diameter is large compared to the dimensions of the patterns on the substrate. As the three-phase contact line of the drop recedes, spontaneous dewetting of the hydrophobic domains and flow into the hydrophilic domains create discrete fluid elements with peripheries that can mimic the underlying surface topography. Suspended particles are carried with the fluid into the wetted regions and deposit there as the discrete fluid domains evaporate. If particle volume fractions are sufficiently high, the entire wetted domain can be covered with colloidal crystals. At lower volume fractions, flow within the evaporating fluid element can direct the deposition of colloidal particles at the peripheries of the domains. High-resolution arrays of particles were obtained with a variety of features depending upon the relative size of the wetting regions to the particles. When the wetting region is larger than the particles, three-dimensional and two-dimensional arrays of ordered particles mimicking the shape of the wetting pattern form, depending on the particle volume fraction. For lower volume fractions, one-dimensional (1-D) arrays along the wet/non-wet boundaries form. When the particle size is similar to the height of fluid on the wetted domain, zero-dimensional distributions of single particles centered in the wet regions can form for wetted squares or 1-D distributions (stripes) form along the axis of striped domains. Finally, when the wetting region is smaller than the particle size, the particles do not deposit within the features but are drawn backward with the receding drop. These results indicate that evaporation on surfaces of patterned wetting provides a highly parallelizable means of tailoring the geometry of particle distributions to create patterned media.     

Nanoscale functionalization and site-specific assembly of colloids by particle lithography

Numerous studies have demonstrated the bottom-up assembly of complex structures such as colloidal crystals, close-packed aggregates, and even rings and tetramers. In this paper we produce a simple localized and nanoscale charge distribution on the surfaces of individual colloidal microspheres using our technique of "particle lithography". In this technique parts of the microspheres are masked off, while polyelectrolytes (or other molecules) cover the remaining portions of the microspheres. The effectiveness of this process is demonstrated by the accurate and reproducible production of colloidal heterodoublets composed of oppositely charged microspheres. These "colloidal molecules" have the potential for significantly higher information content than previous attempts in the literature. The particle lithography technique is advantageous because it is not limited by the resolution of photolithography or by functionalizing chemistries, and the technique opens the door for complex site-specific functionalization of particles.     

Modeling Particle Size Distribution (PSD) in Emulsion Copolymerization Reactions in a Continuous Loop Reactor

A detailed dynamic mathematical model that describes the evolution of particle size distributions (PSDs) during emulsion copolymerization reactions in a continuous loop reactor was developed and compared with experimental data. The model is based on the assumption that two distinct particle populations exist: precursor particles and stable latex particles. Precursor particles are colloidally unstable and therefore may undergo coagulation with other precursors and be absorbed by stable latex particles. It is shown that the kinetic model is able to reproduce the rather complex dynamic behavior of the vinyl acetate/Veova10 emulsion copolymerization in a continuous loop reactor, including the development of oscillatory responses of PSDs during reaction start‐up. It is also shown that, for the studied polymerization system, oscillatory responses are obtained only when both particle populations are assumed to exist and when both coagulative and micellar particle nucleations are simultaneously considered.     

Effect of Charge,Size and Temperature on Stability of Charged Colloidal Nano Particles

Molecular simulation of charged colloidal suspension is performed in NVT canonical ensemble using Monte Carlo method and primitive model. The well-known Derjaguin-Landau-Verwey-Overbeek theory is applied to account for effective interactions between particles. Effect of temperature, valance of micro-ions and the size of colloidal particles on the phase stability of the solution is investigated. The results indicate that the suspension is more stable at higher temperatures. On the other hand, for a more stable suspension to exist, lower micro-ion valance is favorable. For micro-ions of higher charge the number of aggregates and the number of particle in each of aggregate on average is higher. However for the best of our results larger colloidal particle are less stable. Comparing the results with theoretical formula considering the influence of surface curvature shows qualitative consistency.     

Microarray spotting of nanoparticles

A method whereby controlled arrays of hexagonally ordered monolayer islands of polystyrene particles can be deposited using a microspotter was demonstrated. The microparticle size could be varied from the micrometer to the sub-micrometer size range and the island size from less than 10 μm in diameter and up, allowing for direct combination of microarray patterning and parallel nanopatterning of each array spot. The particle monolayer arrays are easily combined with other recent developments in particle lithography of particular interest for biosensor and biointerface screening arrays.     

Direct Synthesis of Yttrium Aluminum Garnet Particles in an Inductively Coupled Radio-Frequency Plasma System

Advanced phosphor materials such as cerium-doped yttrium aluminum garnet (YAG) are of interest for a variety of applications, including light-emitting diodes. Previous studies have shown that it is difficult to produce the desired YAG phase without ex-situ annealing irrespective of the synthesis technique used. This study focuses on direct synthesis of YAG phosphor particles using an inductively coupled thermal plasma system with a ceramic tube inserted coaxially into the chamber. Numerical modeling indicates that the tube provides a more uniform high-temperature region, without flow recirculation. This is hypothesized to aid in size and phase control through selective particle collection and in-flight annealing. Experiments conducted with the tube-insertion setup indicate that phase and size control of the particles is possible to a certain extent, depending on the size of the tube. Characterization results of the synthesized particles showed that submicron-sized YAG particles are synthesized as the majority phase through the tube-insertion setup.     

Confined plasmons in nanofabricated single silver particle pairs: experimental observations of strong interparticle interactions

We report on the optical properties of single isolated silver nanodisks and pairs of disks fabricated by electron beam lithography. By systematically varying the disk size and surface separation and recording elastic scattering spectra in different polarization configurations, we found evidence for extremely strong interparticle interactions. The dipolar surface plasmon resonance for polarization parallel to the dimer axis exhibited a red shift as the interdimer separation was decreased; as expected from previous work, an extremely strong shift was observed. The scattering spectra of single particles and pairs separated by more than one particle radius can be well described by the coupled dipole approximation (CDA), where the particles are approximated as point dipoles using a modified dipole polarizability for oblate spheroids. For smaller particle separations (d < 20 nm), the simple dipole model severely underestimates the particle interaction, indicating the importance of multipolar fields and finite-size effects. The discrete dipole approximation (DDA), which is a finite-element method, describes the experimental results well even at d < 20 nm, including particles that have metallic bridges.     

Colloidal self-assemblies used as templates to control size,shape and self-organization of nanoparticles

In this paper we show that the use of colloidal assemblies as templates favors the control of the size and shape of nanoparticles. As expected theoretically, the change in size and shape of copper metal nanosized particles induces changes in their optical properties. Cylindrical copper metal particles having the same size and shape can be obtained in various regions of the phase diagram when the template is made of interconnected cylinders. Self-assembly of silver metal nanoparticles is reported. Monolayers of particles organized in a hexagonal network are formed over very large domains. Small or large aggregates can also be produced, and, in these aggregates, the particles are highly organized and form pseudo-crystals with a face-centered cubic structure for various particles sizes. The optical properties of the silver nanoparticles isolated in micellar solution or self-assembled in 2D or 3D supperlattices are reported. Syntheses of magnetic fluids differing in their particle size are presented. The magnetic properties differ with the particle size.     

A model for investigating the behaviour of non-spherical particles at interfaces

This paper introduces a simple method for modelling non-spherical particles with a fixed contact angle at an interface whilst also providing a method to fix the particles orientation. It is shown how a wide variety of particle shapes (spherical, ellipsoidal, disc) can be created from a simple initial geometry containing only six vertices. The shapes are made from one continuous surface with edges and corners treated as smooth curves not discontinuities. As such, particles approaching cylindrical and orthorhombic shapes can be simulated but the contact angle crossing the edges will be fixed. Non-spherical particles, when attached to an interface can cause large distortions in the surface which affect the forces acting on the particle. The model presented is capable of resolving this distortion of the surface around the particle at the interface as well as allowing for the particle's orientation to be controlled. It is shown that, when considering orthorhombic particles with rounded edges, the flatter the particle the more energetically stable it is to sit flat at the interface. However, as the particle becomes more cube like, the effects of contact angle have a greater effect on the energetically stable orientations. Results for cylindrical particles with rounded edges are also discussed. The model presented allows the user to define the shape, dimensions, contact angle and orientation of the particle at the interface allowing more in-depth investigation of the complex phenomenon of 3D film distortion around an attached particle and the forces that arise due to it.     

Stop-flow lithography to generate cell-laden microgel particles

Encapsulating cells within hydrogels is important for generating three-dimensional (3D) tissue constructs for drug delivery and tissue engineering. This paper describes, for the first time, the fabrication of large numbers of cell-laden microgel particles using a continuous microfluidic process called stop-flow lithography (SFL). Prepolymer solution containing cells was flowed through a microfluidic device and arrays of individual particles were repeatedly defined using pulses of UV light through a transparency mask. Unlike photolithography, SFL can be used to synthesize microgel particles continuously while maintaining control over particle size, shape and anisotropy. Therefore, SFL may become a useful tool for generating cell-laden microgels for various biomedical applications.     

Monte Carlo computer simulations and electron microscopy of colloidal cluster formation via emulsion droplet evaporation

We consider a theoretical model for a binary mixture of colloidal particles and spherical emulsion droplets. The hard sphere colloids interact via additional short-ranged attraction and long-ranged repulsion. The droplet-colloid interaction is an attractive well at the droplet surface, which induces the Pickering effect. The droplet-droplet interaction is a hard-core interaction. The droplets shrink in time, which models the evaporation of the dispersed (oil) phase, and we use Monte Carlo simulations for the dynamics. In the experiments, polystyrene particles were assembled using toluene droplets as templates. The arrangement of the particles on the surface of the droplets was analyzed with cryogenic field emission scanning electron microscopy. Before evaporation of the oil, the particle distribution on the droplet surface was found to be disordered in experiments, and the simulations reproduce this effect. After complete evaporation, ordered colloidal clusters are formed that are stable against thermal fluctuations. Both in the simulations and with field emission scanning electron microscopy, we find stable packings that range from doublets, triplets, and tetrahedra to complex polyhedra of colloids. The simulated cluster structures and size distribution agree well with the experimental results. We also simulate hierarchical assembly in a mixture of tetrahedral clusters and droplets, and find supercluster structures with morphologies that are more complex than those of clusters of single particles.     

Rheological behavior of thermoreversible kappa-carrageenan/nanosilica gels

The rheological behavior of silica/kappa-carrageenan nanocomposites has been investigated as a function of silica particle size and load. The addition of silica nanoparticles was observed to invariably impair the gelation process, as viewed by the reduction of gel strength and decrease of gelation and melting temperatures. This weakening effect is seen, for the lowest particle size, to become slightly more marked as silica concentration (or load) is increased and at the lowest load as particle size is increased. These results suggest that, under these conditions, the particles act as physical barriers to polysaccharide chain aggregation and, hence, gelation. However, for larger particle sizes and higher loads, gel strength does not weaken with size or concentration but, rather, becomes relatively stronger for intermediate particles sizes, or remains unchanged for the largest particles, as a function of load. This indicates that larger particles in higher number do not seem to increasingly disrupt the gel, as expected, but rather promote the formation of stable gel network of intermediate strength. The possibility of this being caused by the larger negative surface charge found for the larger particles is discussed. This may impede further approximation of neighboring particles thus leaving enough inter-particle space for gel formation, taking advantage of a high local polysaccharide concentration due to the higher total space occupied by large particles at higher loads.     

Reversed-phase poly(styrene-divinylbenzene) materials optimised for large scale preparative and process purification of synthetic peptides and recombinant proteins

Rigid macroporous copolymers of styrene and divinylbenzene have been designed for large-scale preparative and process-scale purification of synthetic peptides and recombinant proteins. The polymeric particles are mechanically stable and hence able to operate at the required high linear velocities. The pore size and pore morphology has been optimised to enable unhindered solute diffusion whilst providing maximum available surface area to enhance loading capacity. A 100 A pore size has been developed for synthetic peptides and a 300 A pore size for recombinant proteins. Precise control of particle size, within the range 10 to 20 microm, is possible which together with the very narrow particle size distribution enables maximum resolution/loading to be obtained within the pressure limits of the instrumentation being used. The chemical stability of the polymer enables cleaning in place with 1 M sodium hydroxide without particle dissolution or a deterioration in selectivity. These materials can be packed into compression hardware and are manufactured as single lots up to 100 kg (300 l) batch size.     

Nanospheres in a nematic liquid crystal solvent: the influence of particle size

We use Monte Carlo simulations to investigate a simple lattice model for nematic liquid crystals containing nanospheres. The influence of particle size on the phase behaviour is studied using two different sized particles. The phase diagram is found to be topologically equivalent for both particle sizes, with a large biphasic region corresponding to coexistence between a rod-rich nematic and a rod-poor isotropic phase. For small spheres, the rod-rich nematic phase is stable for relatively large volume fractions of spheres (up to a maximum of about 16%). In contrast, the nematic phase for the system with larger spheres is constrained to a much narrower region of the phase diagram.     

Some aspects of polymer colloids I. Preparation and properties of different types of latex particles

The boundary region separating a latex particle from the surrounding medium has a great influence on the properties of latex dispersions. Four types of polystyrene and polystyrene/comonomer latices differing greatly in the structure of the boundary region were prepared. The first part of a series of papers reports on the preparation of the various latex dispersions. Mean particle sizes were obtained from simple turbidity measurements, quasi-elastic light scattering, and electron micrographs. The behavior of the particles in the centrifugal force field is a simple tool for detecting aggregation tendencies that are not directly related to salt stability. The BET-surface area agrees with the area calculated from the mean particle size when a sharp boundary and smooth surface is developed between the particle and the surrounding medium. In the case of particles with extended boundary regions (core/shell particles or particles with hairy envelopes), film formation reduces the specific surface area. Removal of soluble oligomers and polymers from the boundary region during subsequent treatments (purification and centrifugation before freeze-drying) can increase the surface area considerably.     

Stabilization of nonaqueous foam with lamellar liquid crystal particles in diglycerol monolaurate/olive oil system

Nonaqueous foams stabilized by lamellar liquid crystal (L alpha) dispersion in diglycerol monolaurate (designated as C12G2)/olive oil systems are presented. Foamability and foam stability depending on composition and the effects of added water on the nonaqueous foaming behavior were systematically studied. It was found that the foamability increases with increasing C12G2 concentration from 1 to 3 wt% and then decreases with further increasing concentration, but the foam stability increases continuously with concentration. Depending on compositions, foams are stable for a few minutes to several hours. Foams produced by 10 wt% C12G2/olive oil system are stable for more than 6 h. In the study of effects of added water on the foaming properties of 5 wt% C12G2/olive oil system, it was found that the foamability and foam stability of 5 wt% C12G2/olive oil decreases upon addition of 1 wt% water, but with further increasing water, both the foamability and foam stability increase. Foams with 10% water added system are stable for approximately 4 h. Phase behavior study of the C12G2 in olive oil has shown the dispersion of L alpha particles in the dilute regions at 25 degrees C. Thus, stable foams in the C12G2/olive oil system can be attributed to L alpha particle, which adsorb at the gas-liquid interface as confirmed by surface tension measurements and optical microscopy. Laser diffraction particle size analyzer has shown that the average particle diameter decreases with increasing the C12G2 concentration and, hence, the foams are more stable at higher surfactant concentration. Judging from foaming test, optical micrographs, and particle size, it can be concluded that stable nonaqueous foams in the studied systems are mainly caused by the dispersion of L alpha particles and depending on the particle size the foam stability largely differs.     

"Depth-profiling" and quantitative characterization of the size, composition, shape, density, and morphology of fine particles with SPLAT, a single-particle mass spectrometer

A significant fraction of atmospheric particles are composed of inorganic substances that are mixed or coated with organic compounds. The properties and behavior of these particles depend on the internal composition and arrangement of the specific constituents in each particle. It is important to know which constituent is on the surface and whether it covers the particle surface partially or entirely. We demonstrate here an instrument consisting of an ultrasensitive single-particle mass spectrometer coupled with a differential mobility analyzer to quantitatively measure in real time individual particle composition, size, density, and shape and to determine which substance is on the surface and whether it entirely covers the particle. For this study, we use NaCl particles completely coated with liquid dioctyl phthalate to generate spherical particles, and NaCl particles partially coated with pyrene, a solid poly aromatic hydrocarbon, to produce aspherical particles with pyrene nodules and an exposed NaCl core. We show that the behavior of the mass spectral intensities as a function of laser fluence yields information that can be used to determine the morphological distribution of individual particle constituents.     

Nonaqueous Emulsions – A Versatile Tool for New Types of Functional Nanoparticles

Summary : The preparation of functional polymer latex particles is usually carried out in aqueous heterogeneous systems, i.e. for example in emulsion or mini-emulsion polymerization. Due to the presence of water, moisture sensitive reactions like step growth polymerizations or metal catalyzed reactions can not be accomplished without side reactions and / or decomposition. In order to avoid these side reactions, different nonaqueous emulsion systems have been developed. According to the desired polymerization procedure, these systems consist of a nonpolar organic phase surrounded by a perfluorinated solvent or of a polar organic phase which is dispersed in a nonpolar organic solvent. Both emulsions are stabilized by amphipolar block copolymers and result in long time stable particle dispersions. The resulting dispersions yield particles with narrow size distributions and – depending on the reaction conditions – diameters down to tens of nanometers. This technique allows the formation of particles consisting of numerous different classes of polymers, e.g. polyurethanes, polyesters, polyolefins etc. and the formation of more complex morphologies such as core shell structures.     

Facile photochemical synthesis of unprotected aqueous gold nanoparticles

Aqueous, unprotected gold nanoparticles were prepared from HAuCl4 using a water-soluble benzoin (Irgacure-2959) as a photochemical source of strongly reducing ketyl radicals. This rapid method provides spatiotemporal control of nanoparticle generation, while light intensity can be used to control particle size. The particles are stable for months and do not require any of the conventional (S, N, or P) stabilizing ligands, although these can be readily incorporated if required.