Study of the ESI-mass spectrometry ionization mechanism of Fischer carbene complexes

By means of deuterium-labeling experiments, we have carried out a systematic ESI-MS study to determine the mechanism of ESI ionization of alkenyl and alkynyl group 6 Fischer carbene complexes. These compounds can be ionized under ESI conditions only in the presence of additives such as hydroquinone (HQ) or tetrathiafulvalene (TTF). Our results demonstrate that in the ESI source an anion-radical is formed after the initial HQ- or TTF-mediated electron transfer to the metallic carbene complex. For alkenyl carbene complexes, this species evolves by extrusion of a hydrogen radical to form an allenylchromium anion that is detected as the [M - H](-) ion in the mass spectrum. The preference for this mechanistic pathway could be rationalized by DFT calculations. In the case of alkynyl carbene complexes, experiments combining deuterated substrate, additive, and solvent demonstrate that the previously proposed allene-anion carbene complex is not formed. Instead, the H transfer from the ethoxy group in the anion radical, followed by extrusion of a hydrogen radical, leads to an allenyl anion that is detected in the ESI-MS as [M - H - CO](-).     

Use of a moving-belt interface for on-line high-performance liquid chromatography/mass spectrometry characterization of polycyclic aromatic compounds of molecular weight up to 580 Da in environmental samples.

The applicability of the moving belt high-performance liquid chromatography/mass spectrometry (HPLC/MS) interface to the analysis of high molecular weight polycyclic aromatic compounds (PACs) in a complex sample derived from coal tar is investigated. This interface provides good preservation of chromatographic integrity and useful electron ionization spectra of thermally stable PACs of low to moderate volatility up to molecular masses of at least 580 Da. It is concluded that this HPLC/MS technique will be useful in the analysis of such complex samples, provided a large enough suite of standard compounds can be made available.     

Validated analytical strategy for the determination of polycyclic aromatic compounds in marine sediments by liquid chromatography coupled with diode-array detection and mass spectrometry

The aim of this work was to optimise and validate the experimental conditions for the analysis of 20 polycyclic aromatic compounds (PACs) [19 polycyclic aromatic hydrocarbons (PAHs) and dibenzothiophene as polycyclic aromatic sulphur heterocycle (PASH)] in marine sediments by reversed-phase high-performance liquid chromatography (LC) coupled to photodiode array detection (DAD) and to mass spectrometry (MS). The LC-MS interface used was atmospheric pressure chemical ionization (APCI) in the positive ion mode. The operational parameters of the APCI interface and MS detection, such as organic modifier, fragmentation voltage, gain, vaporizer temperature, corona current, capillary voltage, drying gas (N2) and nebulizer pressure, were studied. The sediments were subjected to microwave-assisted solvent extraction (MAE) and clean-up by solid-phase extraction (SPE). The relevance of the selected PACs lies in the fact that 16 PACs are classified by the US Environmental Protection Agency as priority pollutants; 17 PACs are detected in the Prestige oil spill; and 8 PACs are included in the priority substance list of the EU water policy. Recoveries from 47% to 102% were obtained for SRM 1944 certified reference sediment. The limits of quantitation were lower than 100 ngg(-1) dry weight for most PACs, and good precision was achieved.     

Electrospray ionization mass spectrometry and tandem mass spectrometry of clodronate and related bisphosphonate and phosphonate compounds

The bisphosphonate family with a P-C-P structure is a broad class of drugs, widely investigated as potential inhibitors in bone diseases and calcium metabolic disorders. In this study, the mass spectrometric (MS) behavior and fragmentation of clodronate and related bisphosphonate and phosphonate compounds was studied by using negative ion electrospray ionization (ESI) with triple quadrupole and ion trap instruments. The effect of pH on the degree of deprotonation of the polyprotic bisphosphonic and phosphonic acids in negative ion ESI-MS was investigated, and the degree of deprotonation in the ESI mass spectra and the dissociation in the liquid phase were compared. The results provide evidence that the measured ESI mass spectra do not correlate with the chemistry in the liquid phase owing to the decrease in the pH of the solvent droplets during the ion evaporation process and the charge state neutralization in the gas phase. Ion trap MS(n) provided useful information on the fragmentation study of clodronate and related bisphosphonate and phosphonate compounds, in which interesting fragmentation pathways including the direct elimination of carbon monoxide from deprotonated bisphosphonates and formation of a P-P bond were observed. Reactions between the product ions with a -PO(2) group and residual water in the ion trap or in the high-pressure region of the triple quadrupole instrument formed other unexpected fragmentation paths for all the bisphosphonates studied.     

Negative ion laser desorption ionization time-of-flight mass spectrometry of nitrated polycyclic aromatic hydrocarbons

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are widespread environmental pollutants that are generated by incomplete combustion and by atmospheric transformation of polycyclic aromatic hydrocarbons (PAHs). Many nitro-PAH compounds are potent genotoxins and some are direct acting mutagens. Detection of nitro-PAHs in aerosols is complicated by small sample sizes and nitro-PAH abundances that are 1–2 orders of magnitude less than analogous unsubstituted PAHs. Selective detection of several nitro-PAHs by using laser desorption ionization time-of-flight mass spectrometry in negative ion mode has been achieved. Desorption and ionization of nitro-PAHs were effected by using pulsed UV radiation at 266 and 213 ran. Intense molecular anions were observed in addition to fragments identified as CN^? and NO ₂ ^? , which were characteristic indicators of the presence of nitro-PAHs. Selective detection of nitro-PAHs in negative ion mode was demonstrated in the analysis of a diesel particulate sample.     

Dual parallel electrospray ionization and atmospheric pressure chemical ionization mass spectrometry (MS), MS/MS and MS/MS/MS for the analysis of triacylglycerols and triacylglycerol oxidation products

Two mass spectrometers, in parallel, were employed simultaneously for analysis of triacylglycerols in canola oil, for analysis of triolein oxidation products, and for analysis of triacylglycerol positional isomers separated using reversed-phase high-performance liquid chromatography. A triple quadrupole mass spectrometer was interfaced via an atmospheric pressure chemical ionization (APCI) interface to two reversed-phase liquid chromatographic columns in series. An ion trap mass spectrometer was coupled to the same two columns using an electrospray ionization (ESI) interface, with ammonium formate added as electrolyte. Electrospray ionization mass spectrometry (ESI-MS) under these conditions produced abundant ammonium adduct ions from triacylglycerols, which were then fragmented to produce MS/MS spectra and then fragmented further to produce MS/MS/MS spectra. ESI-MS/MS of the ammoniated adduct ions gave product ion mass spectra which were similar to mass spectra obtained by APCI-MS. ESI-MS/MS produced diacylglycerol fragment ions, and additional fragmentation (MS/MS/MS) produced [RCO](+) (acylium) ions, [RCOO+58](+) ions, and other related ions which allowed assignment of individual acyl chain identities. APCI-MS of triacylglycerol oxidation products produced spectra like those reported previously using APCI-MS. APCI-MS/MS produced ions related to individual fatty acid chains. ESI-MS of triacylglycerol oxidation products produced abundant ammonium adduct ions, even for those molecules which previously produced little or no intact molecular ions under APCI-MS conditions. Fragmentation (MS/MS) of the [M+NH(4)](+) ions produced results similar to those obtained by APCI-MS. Further fragmentation (MS/MS/MS) of the diacylglycerol fragments of oxidation products provided information on the oxidized individual fatty acyl chains. ESI-MS and APCI-MS were found to be complementary techniques, which together contributed to a better understanding of the identities of the products formed by oxidation of triacylglycerols.     

Different behavior of dextrans in positive-ion and negative-ion mass spectrometry

A mass spectrometric (MS) comparative study of dextran samples using two different ionization techniques (matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI)) in both positive- and negative-ion modes is reported. The experiments were carried out with two polydisperse dextrans (1000 and 8800 Da) and isomaltotriose. In the positive-ion mode, the expected alkali metal ion adducts of dextrans were observed in both techniques. In contrast, the expected preferential formation of deprotonated molecules [M - H](-) was not confirmed in negative mode MALDI time-of-flight (TOF) MS, where the series of ions [M(x)- H +42](-) or [M(x+1)- H - 120](-), coming either from some addition or fragmentation, were observed. In both ionization techniques, these ions formed the main distributions of dextrans in the negative-ion mode. It seems that the negative molecular ions formed from the alpha1 --> 6 linkage of polyglucose oligomers easily decompose, and the product ions [M - H - 120](-) markedly dominate. The fragmentation experiments and especially the investigation of the fundamental role of the nozzle-skimmer potential in ESI-MS supported our explanation of the observed behavior because its higher values caused higher fragmentation. The experiments with isomaltotriose excluded any addition of 42 Da during the MS procedures, which is not distinguishable from the loss of 120 Da in the case of polydisperse dextrans. MALDI-TOFMS was found to be more sensitive for the detection of higher oligosaccharides and ESI-MS more useful for structural studies.     

高效液相色谱-电喷雾银离子诱导电离飞行时间质谱定性分析高沸点多环芳烃

建立了高效液相色谱-电喷雾飞行时间质谱联用技术快速鉴别高沸点多环芳烃的方法。多环芳烃经色谱柱分离后,通过柱后添加AgNO3溶液诱导其在电喷雾离子源中电离,生成多环芳烃[M]+及其复合[M+Ag]+和[2M+Ag]+特征离子,根据所获得的各特征离子的精确分子量和分子式,可实现多环芳烃类化合物的快速鉴别。将本方法用于美国环保局(USEPA)规定的16种优先控制多环芳烃及原油中多环芳烃类化合物的分析鉴别,结果表明,四环以上的PAHs质谱信号良好,说明本方法适用于四环以上的高分子量、高沸点多环芳烃类化合物的分析鉴别。     

Analysis of metal complex azo dyes by high-performance liquid chromatography/electrospray ionization mass spectrometry and multistage mass spectrometry

Five metal complex azo compounds were analyzed using negative-ion electrospray ionization mass spectrometry (ESI-MS). Mass spectra of all compounds yield intense peaks corresponding to [M - H](-) ions without any fragmentation, where M denotes the neutral compound with a proton as the counterion. Under collision induced dissociation (CID) conditions, structurally important fragment ions were studied using the ion trap analyzer with a multistage mass spectrometry (MS(n) facility. Synthesized compounds with (15)N atoms in the azo group facilitated the fragmentation pattern recognition. A reversed-phase high-performance liquid chromatography (HPLC) method using 5 mM ammonium acetate in 70% aqueous acetonitrile as mobile phase was developed making possible the separation of all complex compounds tested. The lower detection limits of the ESI-MS method are in the range 10-20 ng of each compound. The HPLC/ESI-MS method makes possible the monitoring of ligand exchange in aqueous solutions of metal complex azo dyes, and also investigation of the stabilities of the complexes in solution. Copyright 2000 John Wiley & Sons, Ltd.     

Accurate mass measurement at enhanced mass-resolution on a triple quadrupole mass-spectrometer for the identification of a reaction impurity and collisionally-induced fragment ions of cabergoline

In this study, accurate mass measurements were made by electrospray ionization (ESI) on a triple quadrupole mass spectrometer operating in enhanced mass-resolution mode (peak width = 0.1 u FWMH), to give qualitative information relating to the pharmaceutical, cabergoline. Accurate mass determinations by ESI-MS were performed on a protonated impurity formed during cabergoline storage. The accurate mass measurement resulted in only one proposed elemental composition for the impurity, using reasonable elemental limits and mass tolerance for the calculation. This information was sufficient to propose a structure for the impurity where ESI-MS/MS proved consistent. The difference between the accurate mass measurement and the exact mass calculated for the proposed structure was 0.8 mmu, with a standard deviation of 0.7 mmu for replicate accurate mass determinations. Accurate mass determinations in ESI-MS/MS provided information on cabergoline fragment ions formed through collisionally-induced dissociation. Since the potential formation of isobaric ions exists for two major cabergoline fragment ions, accurate mass measurement allowed for the determination of the most probable fragment ion structures. The differences between the accurate mass measurements and exact masses calculated for the proposed fragment ions were 1.9 and 2.1 mmu, with standard deviations of 0.4 and 0.8 mmu, respectively, for replicate determinations.     

Selenium speciation by HPLC with tandem mass spectrometric detection

An HPLC/MS-MS method was developed for the analysis of selenium species. Tandem mass spectrometry (MS-MS) was chosen as a detector to provide structural and molecular information allowing the identification of species, which are not commercially available as standards. A new separation method for selenium species was developed, based on porous graphitic carbon (PGC) as the stationary phase. The applicability of the optimized HPLC/MS-MS system was demonstrated by the analysis of a mixture containing Se-methyl-selenocysteine, selenomethionine, selenocystine, selenoethionine and selenocystamine. All peaks were baseline-resolved and eluted within 16 min. Positive ionization led to higher intensities than negative ionization. Signal suppression tests showed that electrospray ionization (ESI) is a more effective ionization method than atmospheric pressure chemical ionization (APCI) for selenium species in a matrix containing pentafluoropropionic acid, heptafluorobutyric acid or ammonium formate. Comparative experiments with a triple quadrupole mass spectrometer (Quattro LC) and a time-of-flight instrument (Q-Tof-2) showed a 20 fold higher mass resolution of the latter mass spectrometer (m/Am= 5000) and significantly lower intensities for analyte signals as well as background noise compared to the triple quadrupole instrument. MS-MS spectra of the investigated selenium species including characteristic fragmentation patterns are presented.     

Determination of polycyclic aromatic compounds by high-performance liquid chromatography with simultaneous mass spectrometry and ultraviolet diode array detection

A major problem in the determination of polycyclic aromatic compounds (PACs) in environmental samples is the extreme complexity of the extracts, even after extensive fractionation. The combination of high-performance liquid chromatography (HPLC) with simultaneous mass spectrometry (MS) and ultraviolet diode array detection (DAD) is a powerful tool for the identification and quantitation of such species with a high degree of confidence. HPLC allows the selective separation of a wide variety of PACs, including thermally labile and high molecular weight compounds. Electron ionization MS with the moving belt interface provides high sensitivity and selectivity, as well as structural information such as molecular weight, functional groups, and elemental composition. The diode array detector helps to differentiate isomeric structures and confirm compound identity.     

Negative ion electrospray ionization mass spectral study of dicarboxylic acids in the presence of halide ions

The negative ion electrospray ionization (ESI) mass spectra of a series of dicarboxylic acids, a pair of isomeric (cis/trans) dicarboxylic acids and two pairs of isomeric (positional) substituted benzoic acids, including a pair of hydroxybenzoic acids, were recorded in the presence of halide ions (F(-), Cl(-), Br(-) and I(-)). The ESI mass spectra contained [M--H](-) and [M+X](-) ions, and formation of these ions is found to be characteristic of both the analyte and the halide ion used. The analytes showed a greater tendency to form adduct ions with Cl(-) under ESI conditions compared with the other halide ions used. The isomeric compounds yielded distinct spectra by which the isomers could be easily distinguished. The collision-induced dissociation mass spectra of [M+X](-) ions reflected the gas-phase basicities of both the halide ion and [M--H](-) ion of the analyte. However, the relative ordering of gas-phase basicities of all analyte [M--H](-) and halide ions could not account for the dominance of chloride ion adducts in ESI mass spectra of the analytes mixed with equimolar quantities of the four halides.     

Pressurised solvent extraction of nitrated derivatives of polycyclic aromatic hydrocarbons from roadside dust

An analytical method based upon the pressurised solvent extraction and gas chromatography and mass spectrometry (GC-MS) for analysis of nitrated derivatives of polycyclic aromatic hydrocarbons (nitro-PAHs) in roadside dust has been developed. Five nitro-PAHs (1-nitronaphthalene, 1-nitropyrene, 9-nitroanthracene, 2-nitrofluorene, 6-nitrochrysene) were chosen for this study because of their variable physical properties and effect on human health. Experiments with spiked inert matrix were used for the best extraction conditions finding. Different extraction conditions (temperature, pressure, solvents and duration of extraction cycle) were examined. The highest recoveries were observed at the extraction pressure of 14?MPa, temperature of 100°C and two cycles of 5?min extraction time, when dichloromethane was used as an extraction solvent. These conditions were applied to the extraction of nitro-PAHs from roadside dust. After extraction the nitro-PAHs fraction was isolated by the silica gel column chromatography. The GC-MS detector was used for analyses of the extracts. Recoveries of nitro-PAHs after extraction from roadside dust ranged from 60% for 9-nitroanthracene to 108% for 6-nitrochrysene.     

Electrolytic electrospray ionization mass spectrometry of quaterthiophene-bridged bisporphyrins: beyond the identification tool

Several quaterthiophene-bridged bisporphyrins were analyzed by electrospray ionization mass spectrometry (ESI-MS). The active centers of these molecular assemblies are two porphyrins moieties complexed (Z) or not (H) with a metal ion, typically Zn(2+), and the spacer is a quaterthiophene. The two end-groups were chemically linked to the quaterthiophene spacers by (i) a C--C single bond, (ii) a trans double bond or (iii) a triple bond. The formation of charged species either by protonation ([M + H](+) and [M + 2H](2+)) or electron(s) loss (M(+) and M(2+)), account for the occurrence of electrochemical processes in the basic operation of an electrospray source acting in a non-aqueous solvent. The nature of the observed charged species is correlated with the electro-oxidation properties and proton production by electro-oxidation of residual water. The occurence of these electrochemical reaction is proposed when the electroactivity of the electrosprayed substrates is not sufficient to support the current demand of the ESI source. In this way, the results obtained from the analysed series suggest the occurrence of such a process when the interfacial potential of the metal capillary reaches a value of 0.75 V vs Ag/AgCl. The results of theoretical calculations confirm the importance of the ionization energy with regard to the protonation energy in the course of the ionization reaction. The structural differences at the porphyrin-linker junctions lead to significantly smaller ionization energy in the case of the trans double bond. The MS observation of discharged dimers from molecular assemblies, including two complexed porphyrins ZZ or two free bases HH as end-group and a triple bond as the quaterthiophene-bisporphyrin junction, indicates together with molecular modelling (carried out at the semi-empirical PM3 level), that the planar and symmetric structures favour stacking.     

Electron-transfer-induced decomposition of 1,2-dioxetanes in negative-mode matrix- assisted laser desorption/ionization time-of-flight mass spectrometry

1,2-Dioxetanes bearing an aromatic electron donor undergo intramolecular charge-transfer-induced chemiluminescence (CTICL). Although there has been some controversy regarding the mechanisms involved, there is little experimental evidence to strongly support any of the proposed mechanisms. In the course of our investigations, to clarify these mechanisms, we tried to effectively ionize dioxetanes bearing a phenolic group and found that poly(3-octylthiophene-2,5-diyl) was a promising matrix for negative-mode matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF-MS). Electron-transfer ionization was found to take place for dioxetanes bearing a hydroxyphenyl moiety that had been further substituted with an aromatic group, which acted as an antenna to catch an electron from the matrix. Furthermore, the characteristic fragmentation of dioxetanes 3c-3d was thought to occur by the elimination of 2-methyl-1-propene (56 u) and pivalaldehyde (86 u) from deprotonated ion [M - H](-) of dioxetanes, based on the results of muliple mass spectrometry measurements of dioxetanes using MALDI quadrupole ion trap ToF-MS. Based on a comparison of fragmentation in dioxetanes and the corresponding keto esters, dioxetanes were presumed to initially generate excited keto esters from which fragmentation took place.     

Investigation of different combinations of derivatization, separation methods and electrospray ionization mass spectrometry for standard oligosaccharides and glycans from ovalbumin

Derivatization procedures using 1-phenyl-3-methyl-5-pyrazolone (PMP) and 2-aminonaphthalene trisulfone (ANTS) were selected among a number of well known methods for labelling carbohydrates. PMP derivatives were selected owing to our laboratory's previous high-performance liquid chromatography/electrospray ionization mass spectrometry (HPLC/ESI-MS) experience with these, whereas the ANTS-labelled compounds were prepared for fluorophore-assisted carbohydrate electrophoresis (FACE) separation. ANTS-oligosaccharide standards were characterized to study their ionization patterns. Reversed-phase and normal-phase HPLC systems were coupled on-line with ESI-MS. Each necessitated its own mobile phase system which, in turn, imposed some important changes in the ionization conditions used and/or on the ionization patterns and spectra obtained. Following characterization of the intact glycoprotein ovalbumin with ESI-MS, its glycans were detached using the enzyme PNGase-F. The glycans were subjected to PMP and ANTS derivatization. It was very difficult to separate ANTS derivatives by reversed-phase HPLC owing to lack of retention, and normal-phase HPLC offered reasonable retention with limited separation. PMP compounds overall yielded better normal- and reversed-phase separations and improved sensitivity over the ANTS-labelled sugars, for which negative mode ESI had to be used. The combination of ESI of intact ovalbumin and ESI of PMP-glycans gave rise to the detection of over 20 different glycoforms, excluding the possible presence of structural isomers for each sugar composition detected.     

Observation of noncovalent complexes to the avidin tetramer by electrospray ionization mass spectrometry

Intact avidin-biotin and avidin-biotin maleimide noncovalent complexes have been observed by electrospray ionization mass spectrometry (ESI-MS) by using an extended mass range quadrupole mass spectrometer. By utilizing mild ES1 interface conditions, the expected solution behavior of four biotin or biotin maleimide molecules noncovalently binding to each avidin tetramer can be preserved in the gas phase. The ESI-MS results show the appropriate mass additions of 973 ± 60 Da for biotin and 1802 ± 40 Da for biotin maleimide to the avidin tetramer species. These results support the hypothesis that substantial retention of higher order structure is possible in the gas phase by using gentle ESI conditions.     

Even-electron ions: a systematic study of the neutral species lost in the dissociation of quasi-molecular ions

The collision-induced dissociations of the even-electron [M + H](+) and/or [M - H](-) ions of 121 model compounds (mainly small aromatic compounds with one to three functional groups) ionized by electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) have been studied using an ion trap instrument, and the results are compared with the literature data. While some functional groups (such as COOH, COOCH(3), SO(3)H in the negative ion mode, or NO(2) in both the positive and negative ion modes) generally promote the loss of neutrals that are characteristic as well as specific, other functional groups (such as COOH in the positive ion mode) give rise to the loss of neutrals that are characteristic, but not specific. Finally, functional groups such as OH and NH(2) in aromatic compounds do not lead to the loss of a neutral that reflects the presence of these substituents. In general, the dissociation of [M + H](+) and [M - H](-) ions generated from aliphatic compounds or compounds containing an aliphatic moiety obeys the even-electron rule (loss of a molecule), but deviations from this rule (loss of a radical) are sometimes observed for aromatic compounds, in particular for nitroaromatic compounds. Thermochemical data and ab initio calculations at the CBS-QB3 level of theory provide an explanation for these exceptions. When comparing the dissociation behaviour of the even-electron [M + H](+) and/or [M - H](-) ions (generated by ESI or APCI) with that of the corresponding odd-electron [M](+) ions (generated by electron ionization, EI), three cases may be distinguished: (1) the dissociation of the two ionic species differs completely; (2) the dissociation involves the loss of a common neutral, yielding product ions differing in mass by one Da, or (3) the dissociations lead to a common product ion.     

Direct characterization of iodine covalently bound to fulvic acids by electrospray mass spectrometry.

Numerous studies have demonstrated that humic substances (HS) react with iodine to form iodo derivatives and thereby can control the bioavailability of radioisotopes. Unfortunately, none of these studies have provided detailed insights into product compounds and so far, to our knowledge, the direct analysis of these species by electrospray ionization (ESI) mass spectrometry has not been explored. The reactivity of iodine with fulvic acids (FA) present in HS was investigated by means of ESI coupled with a quadrupole time-of-flight (Q-TOF) mass spectrometer. ESI spectra of solutions, that were indicated by MS/MS analysis to have formed iodinated species, apparently displayed singly charged ions corresponding in m/z to hypothesized species, viz., [RI - H](-), R = (substituted FA compound). MS/MS analysis based on the diagnostic fragment ions for FA compounds and their iodo derivatives suggests that FA undergo aromatic substitutions. Furthermore, significant differences in mass profiles are observed that presumably result from extended redox reactions. The ESI-MS technique opens up new opportunities to understand the scavenging properties of HS towards radionuclides and heavy metals for environmental studies.