Effect of substitution and the counterion on the structural and spectroscopic properties of CuII complexes of methylated pyrazoles

The coordination chemistry of pyrazole and three of its methyl derivatives with the chloride and nitrate salts of copper(II) under strictly controlled reaction conditions is systematically explored to gain a better understanding of the effect of counterion coordination strength and ligand identity on the structure and electronic absorption spectra of their resulting complexes. Despite the initial 2 : 1 ligand to metal ratio in water, copper(II) nitrate forms exclusively 4 : 1 ligand to metal complexes while copper(II) chloride forms a 4 : 1 ligand to metal complex only with pyrazole, with the methyl derivatives forming 2 : 1 ligand to metal complexes, as determined by single-crystal X-ray diffraction (XRD). This is attributed to a combination of ligand sterics and stronger coordination of chloride relative to nitrate. Electronic absorption spectroscopy in both water and methanol reveals a surprisingly strong effect of the pyrazole methyl position on the Cu^II d–d transition, with 4-methylpyrazole producing a higher energy d–d transition relative to the other ligands studied. In addition, the number of methyl groups plays a determining role in the energy of the pz π→Cu^II d_xy LMCT band, lowering the transition energy as more methyl groups are added.     

Hydrogen bonding: Part 24. Dichotomous hydration behavior of quaternary ammonium halides

On dehydration in vacuo quaternary ammonium halides show two entirely different types of behavior. Type A salts give first a liquid (4–6 H₂O) of very low vapor pressure, then a series of crystalline framework clathrates (2–4 H₂O), then very stable monohydrates with water—anion dimeric clusters. Type B salts give first a hypobarogenic clathrate (solid at reduced pressure, liquid at 760 torr), then crystalline monohydrates, which, when the pressure is returned to 760 torr, disproportionate into anhydrous salt and same hypobarogenic clathrate. Liquid—solid equilibria for type A at 760 torr is always between framework clathrate and saturated solution (or possibly liquid clathrate) and for type B is between anhydrous salt and hypobarogenic clathrate. Dissolution in water is exothermic for type A salts and endothermic for type B. Examples: type A, choline fluoride, tetramethylammonium fluoride, tetraethylammonium fluoride and chloride, tetrapropylammonium fluoride and chloride; type B, choline chloride, bromide, and iodide, tetramethylammonium chloride and bromide, tetraethylammonium bromide, tetrapropylammonium bromide. Type A behavior is favored by larger cation and smaller (more electronegative) anion, and type B by smaller cation and larger (less electronegative) anion.     

Dialkyl (Alkylene) Dithiophosphate Adducts of Anhydrous Stannous Chloride: Synthesis,Characterization, and Biological Activities

Abstract

Dialkyl (alkylene) dithiophosphate adducts of stannous chloride were synthesized by the reaction of anhydrous tin(II) chloride (SnCl₂) and dialkyl (alkylene) dithiophosphoric acid in a 1:1 molar ratio, under anhydrous reaction conditions, below 5 °C in a closed vessel. The newly synthesized adducts were characterized by physicochemical and spectroscopic techniques [FT-IR, NMR (¹H, ³¹P, and ¹¹⁹Sn), and mass spectrometry]. Coordination modalities have indicated a donor–acceptor interaction between sulfur and tin(II) moieties, where tin(II) acts as a Lewis acid. The adducts were found to have significant antibacterial activity against Escherichia coli and Pseudomonas aeruginosa, and antifungal activity against Aspergillus niger and Candida albicans.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

The synthesis of apatites with an organophosphate and in nonaqueous media

The syntheses of barium, cadmium, calcium, lead, and strontium apatites were performed in anhydrous polar organic solvents such as DMSO, anisole, pyridine, glacial acetic acid, ethanol, methanol, and DMF. Reactions took place under anhydrous conditions at temperatures ranging from 80 to 120 °C and for durations of 1–6 days. Ten apatites were synthesized in nonaqueous solvents and three (PbApF, PbApCl, SrApCl) were obtained using trimethylphosphate as the phosphate source. The use of nonaqueous solvents alleviates the formation of hydrogen phosphates which occurs in aqueous solution for some divalent cations. The limited solubility of even alkali metal salts in many of the solvents also produces nonapatitic double salts such as NaPb₄(PO₄)₃, NaPbPO₄, KPb₄(PO₄)₃, Cd(OH)NO₃, and NaBaPO₄.     

Metal π-allyl chemistry III. The preparation of π-allylpalladium complexes from palladium(II) salts

A number of routes for the preparation of π-allylpalladium complexes from palladium(II) salts were investigated with a view to obtaining a quantitative yield. Quantitative yields were obtained rapidly when a stream of ethylene was passed through an aqueous solution of Na₂PdCl₄ and the allylic chloride, and more slowly on vigorously shaking an aqueous solution of Na₂PdCl₄ with a 3-fold excess of allyl chloride.Spectroscopic evidence is presented to confirm that the first stage of the reaction of allylic compounds with palladium(II) salts involves the formation of an olefinic complex. It is found that such palladium(II)olefin complexes of CH₂CHCH₂X are very much less susceptible to nucleophilic attack when X = Cl than when X = C₅H₁₁, OH or OAc, which are all attacked rapidly by nucleophilic solvents, such as methanol, with deposition of palladium metal.     

Preparation of anhydrous magnesium chloride in a gas-solid reaction with ammonium carnallite

Dehydrated ammonium carnallite was synthesized with bischofite from salt lake and ammonium chloride solution in a 1:1 molar ratio of MgCl₂:NH₄Cl, dehydrated at 160°C for about 4 h. The yield was above 85%. The product was then mixed with solid-state ammonium chloride with a 1:4 mass ratio for the further dehydration at 410°C. The decomposition of NH₄Cl made a pressure of NH₃ at 30.5 kPa to prevent the hydrolysis of ammonium carnallite. The anhydration of magnesium chloride was achieved at 700°C. The results showed that anhydrous magnesium chloride contains magnesium oxide in an amount that was less than 0.1% by weight. XRD pattern and SEM micrograph showed a good dispersion of ammonium carnallite and anhydrous magnesium chloride crystals with well-distributed big grains, just enough to meet the need for the production of magnesium metal in the electrolysis process. __________ Translated from Chinese Journal of Applied Chemistry, 2005, 22(8) (in Chinese)     

Iron powder and tin/tin chloride as new reducing agents of Meerwein arylation reaction with unexpected recycling to anilines

Abstract

Simple and rapid route for Meerwein arylation reaction using iron powder or a mixture of tin/tin chloride has been developed. In the presence of iron powder, different aryl diazonium salts reacted with methyl vinyl ketone, acrylates, and isopropenyl acetate. Production of oximes was detected as the main product with acrylates or in a mixture with β-aryl methyl ketones in the case of methyl vinyl ketone. The in situ produced HNO₂ from an excess of NaNO₂/HCl was trapped by alkyl aryl radical to form oximes in the E configuration form. The presence of tin/tin chloride mixture in the reaction of the aryl diazonium salts with methyl vinyl ketone produced Michael products along with β-aryl methyl ketones. The predicted α-aryl methyl ketones from the reaction of isopropenyl acetate with the diazotized anilines were obtained using iron or tin/tin chloride mixture.     

Synthesis and spectroscopic properties of four metal complexes with bipyridinium-based ligand

A series of new transitional metal charge-transfer (CT) complexes with a bipyridinium-based ligand [M(PrBpy)₂(SCN)₄] (M = Cd(II), Ni(II), Co(II)) and [Cu(PrBpy)(SCN)₃(H₂O)] (PrBpyCl = N-(2-pyrazinyl)-4,4′-bipyridinium chloride) have been obtained and determined by X-ray diffraction, FT-IR and elemental analysis. The CT absorption bands of the four compounds were observed by diffuse reflection spectroscopy and a photo-induced electron transfer occurs in methanol solution upon light irradiation.     

Lewis superacids derived from triflic and triflimidic acids and their use as catalysts in 1,6-diene cycloisomerisation

We have developed a procedure for the preparation of anhydrous metallic triflates and triflimidates of general formulae M(OTf)_n and M(NTf₂)_n based on the oxidative dissolution of metal powders in the presence of HOTf or HNTf₂, respectively. The method provides salts in anhydrous form, solvates with DMSO molecules, and constitutes a good complement to a previous method developed in our group based on an electrochemical procedure. We have compared the catalytic activity of various Sn(IV) salts in the reaction of cycloisomerisation of 1,6-dienes and identified that anhydrous Sn(IV) triflimidates are more active catalysts, as compared to anhydrous Sn(IV) triflate, or their hydrated forms usually obtained by conventional methods of preparation or purchased from chemical suppliers.     

Polymeric Three-Dimensional Crystal Structure of a Tributyltin(IV) Derivative with Acetylene Dicarboxylic Acid

Abstract

A novel polymeric complex has been synthesized by refluxing disodium acetylene dicarboxylate with tributyltin chloride in dry methanol. The solid-state structure of the complex has been determined by single-crystal X-ray analysis. The tin(IV) metal exhibits distorted trigonal bipyramidal geometry. Each carboxylate group of the ligand acts in a bidentate fashion, linking adjacent metal atoms to produce polymeric chains, which are cross-linked into a three-dimensional network.     

METAL SALTS AS NOVEL CATALYSTS FOR EFFICIENT TRANSESTERIFICATION OF β-KETOESTERS

Ethyl/methyl β-ketoesters with alcohols in presence of catalytic amount of anhydrous metal salts (FeSO₄, CuSO₄) undergo smooth transesterification.     

Synthesis,structural and chemosensitivity studies of arene d6 metal complexes having N‐phenyl‐N´‐(pyridyl/pyrimidyl)thiourea derivatives

The d⁶ metal complexes of thiourea derivatives were synthesized to investigate its cytotoxicity. Treatment of various N‐phenyl‐N´ pyridyl/pyrimidyl thiourea ligands with half‐sandwich d⁶ metal precursors yielded a series of cationic complexes. Reactions of ligand (L1‐L3) with [(p‐cymene)RuCl₂]₂ and [Cp*MCl₂]₂ (M = Rh/Ir) led to the formation of a series of cationic complexes bearing general formula [(arene)M(L1)к²_(N,S)Cl]⁺, [(arene)M(L2)к²_(N,S)Cl]⁺ and [(arene)M(L3)к²_(N,S)Cl]⁺ [arene = p‐cymene, M = Ru ( 1 , 4 , 7 ); Cp*, M = Rh ( 2 , 5 , 8 ); Cp*, Ir ( 3 , 6 , 9 )]. These compounds were isolated as their chloride salts. X‐ray crystallographic studies of the complexes revealed the coordination of the ligands to the metal in a bidentate chelating N,S‐ manner. Further the cytotoxicity studies of the thiourea derivatives and its complexes evaluated against HCT‐116 (human colorectal cancer), MIA‐PaCa‐2 (human pancreatic cancer) and ARPE‐19 (non‐cancer retinal epithelium) cancer cell lines showed that the thiourea ligands displayed no activity. Upon complexation however, the metal compounds possesses cytotoxicity and whilst potency is less than cisplatin, several complexes exhibited greater selectivity for HCT‐116 or MIA‐PaCa‐2 cells compared to ARPE‐19 cells than cisplatin in vitro. Rhodium complexes of thiourea derivatives were found to be more potent as compared to ruthenium and iridium complexes.     

Bimetallic Cu–Pt/nanoporous carbon composite as an efficient catalyst for methanol oxidation

A novel bimetallic Cu–Pt nanoparticle supported onto Cu/indirectly carbonized nanoporous carbon composite (Cu–Pt/ICNPCC) was prepared through a two-step process: first, carbonization of furfuryl alcohol-infiltrated MOF-199 [metal–organic framework Cu₃(BTC)₂ (BTC?=?1,3,5-benzene tricarboxylate)], without removing the Cu metal with HF aqueous solution; second, the partial galvanic replacement reaction (GRR) of Cu nanoparticles by Pt^IV upon immersion in a platinum(IV) chloride solution. The synthesized materials characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and electrochemical methods. The EDS result revealed that part of Cu nanoparticles have been substituted by Pt nanoparticles after GRR. The methanol oxidation at the surface of Cu–Pt/ICNPCC was investigated by cyclic voltammetry method in 0.5 M H₂SO₄ and indicated good electro-catalytic activity towards methanol oxidation (E_p?=?0.85 V vs. NHE and j_f?=?1.00 mA cm^?2). It is suggested that this improvement is attributed to the effect of proper Cu/ICNPCC for fine dispersion, efficient adhesion, and prevention of Pt coalescing.     

Reactions of TIN(II) halides with compounds containing a transition metalcarbon σ-bond

Tin(II) chloride inserts into the ironcarbon σ-bond in MeFe(CO)₂Cp (Cp = cyclopentadienyl), in refluxing methanol or THF, to give MeClSnFe(CO)₂- Cp and traces of Cl₃SnFe(CO)₂Cp, but, with EtFe(CO)₂Cp, a mixture of the insertion product, Cl₃SnFe(CO)₂Cp, and Cl₂Sn[Fe(CO)₂Cp]₂ is formed. Insertion of tin(II) chloride was not observed for MeMo(CO)₃Cp and MeMn(CO)₅; in these reactions, and in those between tin(II)_bromide and MeFe(CO)₂Cp, EtFe(CO)₂Cp and Memo(CO)₃Cp, mixtures of halo—metal carbonyls and halotin—metal carbonyls result.     

Microwave-assisted synthesis of tin sulfide nanoflakes and their electrochemical performance as Li-inserting materials

A novel and quick method has been developed for the preparation of tin sulfide (SnS and SnS₂) nanoflakes in high yield (≈93%) by a microwave irradiation technique for 10–40 min. The sulfides were synthesized in a simple domestic microwave oven (DMO) using stannic chloride and stanous chloride as the precursors of tin and thiourea as the precursor of sulfur in ethylene glycol under argon atmosphere. Elemental sulfur and sodium thiosulfate were also tried as precursors of sulfur. The structures, morphologies, compositions, and physical properties of the products were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry, energy dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, Raman spectroscopy, and standard electrochemical techniques. The XRD patterns indicate that the as-synthesized product, obtained after microwave irradiation, is crystalline orthorhombic in the case of the SnS phase and amorphous in the case of SnS₂. Heat treatment of this SnS₂ produced a crystalline hexagonal phase. A possible mechanism for the formation of the tin sulfide nanoflakes is proposed herein. The electrochemical performance of these materials as Li-insertion materials was investigated in a number of electrolyte solutions and was found to be highly sensitive to the solution composition. A stable reversible capacity higher than 600 mAh/g could be obtained with SnS electrodes.     

A comparative study on the thermal decomposition of some transition metal maleates and fumarates

Thermal decomposition of M(mal/fum)·xH₂O (M=Mn, Co, Ni) has been studied in static air atmosphere from ambient to 500°C employing TG-DTG-DTA, XRD and IR spectroscopic techniques. After dehydration the anhydrous maleate salts decompose to metal oxalate in the temperature range of 320–360°C, which at higher temperature undergo an abrupt oxidative pyrolysis to oxides. The anhydrous fumarate salts have been found to decompose directly to oxide phase. A comparison of thermal analysis reveals that fumarates are thermally more stable than maleates.     

A New Tin(II) Chloride-Silver(I) Acetate or -Lead(II) Bromide Reagent for the Addition of F-Alkyl Iodides to Alkenes

A tin(II) chloride-silver(I) acetate or tin(II) chloride-lead(II) bromide reagent can efficiently promote the addition of F-alkyl iodides to various alkenes in anhydrous methanol at room temperature to afford the corresponding F-alkylated iodides in fairly good to excellent yields.     

Synthesis,Characterization, and Crystal Structure of [ReO(Me4tu)4](PF6)3 (tu = thiourea)

A new Re^V oxo complex with tetramethylthiourea, [ReO(Me₄tu)₄](PF₆)₃, has been synthesized by reduction of perrhenate with tin(II) chloride in strongly acidic solution in the presence of excess tetramethylthiourea. The complex has been characterized by elemental analysis and electronic and FTIR spectroscopy. The molecular structure of the compound was determined by X‐ray diffraction methods. The coordination polyhedron is a regular square pyramid with the substituted thiourea sulfur atoms in the equatorial positions [d(Re–S) = 2.339(3) Å] and the oxo ligand located in the summit [d(Re–O) = 1.63(2) Å]. Computational methods were employed to analyze the geometric and electronic structures of tetramethylthiourea and thiourea. Quantum mechanical studies suggest steric hindrance as the reason for the stabilization of the ReO³⁺ center instead of the Re^III one.     

Structural Effects and Microheterogeneity in Concentrated Solutions and Their Role in the Formation of Cadmium Chloride Complexes

The proton relaxation rate and Raman spectra in the regions of vibrations of the Cd-Cl, Cd-OH₂ groups and bending vibrations eta₄ of nitrate ions in the systems CdAn₂-NaCl-H₂O (An = Cl^-, ClO₄ ^-, NO₃ ^-) were measured. In the range of subeutectic concentrations of cadmium salts all possible forms of chloride complexes of cadmium are formed. In the posteutectic region the formation of complexes is structurally induced; it depends on the nature of dominating cybotactic groups and is limited to the formation of only low-coordinate forms. The mechanisms of the formation of chloride complexes in perchlorate and nitrate systems were proposed. It was concluded that, in contrast to the chloride system, the nitrate and perchlorate systems in the presence of sodium chloride are characterized by structural microheterogeneity. The distinctions in the nature of the microheterogeneity and its effect on the complex formation were considered. The solubility polytherm and Raman spectra of the system Cd(NO₃)₂-NaCl-H₂O with a high content of the both salts were measured. The causes of abnormally high mutual solubility of nitrate salts in multicomponent solutions containing salts that crystallize in the hydrated and anhydrous forms were suggested.