Formation and cation distribution in supported manganese ferrite nanoparticles: an X-ray absorption study

Extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) techniques at both Fe and Mn K-edges were used to investigate the formation of MnFe(2)O(4) nanoparticles embedded in a silica aerogel matrix as a function of calcination temperature (at 450, 750 and 900 degrees C). Up to 450 degrees C, two separated highly-disordered phases of iron and manganese are present. With increasing the temperature (to 750 and 900 degrees C), the structure of aerogel nanoparticles becomes progressively similar to that of the spinel structure MnFe(2)O(4) (jacobsite). Quantitative determination of cations distribution in the spinel structure shows that aerogels calcined at 750 and 900 degrees C have a degree of inversion i = 0.20. A pure jacobsite sample synthesised by co-precipitation and used as a reference compound shows a much higher degree of inversion (i = 0.70). The different distribution of iron and manganese cations in the octahedral and tetrahedral sites in pure jacobsite and in the aerogels can be ascribed to partial oxidation of Mn(2+) to Mn(3+) in pure jacobsite, confirmed by XANES analysis, probably due to the synthesis conditions.     

Application of ZrO2-Al2O3 Aerogels to Catalysts

ZrO2-Al2O3 aerogels were prepared by hydrolysis of metal alkoxides in alcoholic solutions and supercritical drying in order to obtain an improved de-NOx catalyst with high activity in a wide temperature range. The aerogels have about 20–50% higher activity than the xerogels in the range 300–600°C. The higher activity of aerogels may be attributed to the higher effective gas diffusivity in them, estimated to be about 20–60 times higher than that of the xerogels, because of their high porosity and large pore size. The catalytic activity of aerogels containing 4–10 mol% ZrO2 is more than 20% higher than that of Al2O3 aerogels at temperatures <450°C.     

Synthesis, structure, texture, and CO sensing behavior of nanocrystalline tin oxide doped with scandia

Weakly agglomerated nanocrystalline scandia doped tin oxide powders with high surface area (170-220 m(2)/g) and uniform size (3-4 nm) were synthesized for the first time by a two-step hydrothermal process in the presence of urea, followed by the calcination between 500 and 1200 degrees C. The structure and texture of the binary oxide system were characterized by thermogravimetry and differential thermal analysis, Brunauer-Emmett-Teller-specific surface area analysis, transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. A metastable scandium tin oxide solid solution in tetragonal structure was formed for the scandia content lower than 6 mol % as the samples were calcined at 800 degrees C, and the excess Sc atoms were dispersed at the surface of the crystallites above this limit. The solid solution was metastable, so scandium migrated toward the surface region of the crystallites and produced a second phase of Sc(4)Sn(3)O(12) during calcining at high temperatures over 1000-1200 degrees C. In the case of the samples with higher dopant concentration (>15 mol %), the calcination at the temperature between 500 and 800 degrees C caused the precipitation of Sc(2)O(3), and the calcination over 1000-1200 degrees C led to the formation of more Sc(4)Sn(3)O(12). Textural analysis showed that doping an appropriate amount of Sc(2)O(3) into nanosized SnO(2) could effectively inhibit the grain growth and stabilize the surface area against high-temperature calcinations below 1000 degrees C. CO gas-sensing property measurements revealed that the dispersion of Sc at the surfaces of the SnO(2) nanocrystallites could improve the CO sensitivity significantly, and the pellet sample with scandia content of 10 mol % sintered at 800 degrees C showed the best CO gas-sensing property in the operation temperature range of 300-400 degrees C. On the basis of the structural and textural analysis, the correlation between the structure/texture and the sensitivity to CO for the as-calcined (SnO(2))(1-x)(Sc(2)O(3))(x) nanocrystallites has been established and explained.     

Structure and Magnetic Properties of FeCo/Al2O3 Nanocomposites

The soft magnetic nanocomposites with equiatomic FeCo particles dispersed in Al2O3 matrix were synthesized via a sol-gel technique combined with H2 reduction method. The samples were characterized by X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The FeCo nanoparticles in all the samples have the typical bcc structure. With the decreasing of Al2O3 content, the mean grain size of FeCo in the nanocomposites and the saturation magnetization of the samples increase, while the coercivity of samples increases firstly and then decreases due to different magnetic mechanisms.     

Structural characterization study of FeCo alloy nanoparticles in a highly porous aerogel silica matrix

A series of FeCo-SiO(2) nanocomposite aerogels having different FeCo loadings of 3, 5, and 8 wt % were prepared using a novel urea-assisted sol-gel route. The size of the nanoparticles, which was estimated using Scherrer analysis of the main peak of the x-ray diffraction pattern, varies from 3 to 8 nm. X-ray absorption fine structure (EXAFS) and x-ray absorption near edge structure (XANES) techniques at both Fe and Co K edges were used to investigate the structure of the FeCo nanoparticles. EXAFS and XANES show that FeCo nanoparticles have the typical bcc structure. Evidence of oxidation was observed in low FeCo content aerogels. Spatially resolved electron energy loss spectroscopy analysis suggests the formation of a passivation layer of predominantly iron oxide.     

Characterization of Alumina Gel Catalysts by Emanation Thermal Analysis (ETA)

Alumina gels made from the metal alkoxide is known to have high catalyst activity for the selective reduction of NO _x by hydrocarbons. It is also reported that the fine structure of the gels effects the activity. In this study, the effect of the preparation method on the fine structure and catalyst activity of the gels was investigated. Monolithic gels were obtained by hydrolysis of Al(sec-C₄H₉O)₃. The wet gels were dried at 90°C (xerogels), supercritically dried (aerogels), or dried after immersion in an ethanol solution of methyltrimethoxysilane (modified xerogels). The changes in the microstructure during heating were discussed using the results of TG-DTA, ETA and N₂ adsorption. The ETA curves show the ²²⁰Rn-release rate, E, of the samples, previously labelled with ²²⁸Th and ²²⁴Ra, during heating. The decrease in E of the xerogel at temperatures higher than 400°C indicates a gradual decrease in the surface area and porosity. A remarkable decrease in the BET surface area of the xerogel was found after heat-treating at 500°C. On the other hand, constant E of the aerogels and modified xerogels above 450°C suggests high thermal stability. The pore radii, estimated by BJH method, and the catalyst activities at 500°C of the aerogels and the modified xerogels were higher than those of the xerogels. The temperature range in which the alumina gels are applicable as catalysts was determined.     

还原条件对NiFe2O4－δ结构稳定性及其催化分解CO2活性的影响

采用柠檬酸络合法制备NiFe2O4，运用XRD、DTA-TG等手段对其结构进行表征，并探讨还原条件对NiFe2O4－δ的结构稳定性及其催化分解CO2成C反应活性的影响。研究结果表明，由柠檬酸络合法制备的NiFe2O4样品量为0.5g时，利用H2还原制备氧缺位NiFe2O4－δ的最佳还原条件为还原温度320℃、氢气流量40mL/min、还原时间3h。还原温度过高、还原时间过长以及氢气流量过大，均会使NiFe2O4－δ还原过度，尖晶石结构瓦解而转变成Fe(Ni)合金和α-Fe等。     

Structural transformation of LiVOPO4 to Li3V2(PO4)3 with enhanced capacity

In the present investigation, we report the transformation of alpha-LiVOPO 4 to alpha-Li 3V 2(PO 4) 3, leading to an enhancement of capacity. The alpha-LiVOPO 4 sample was synthesized by a sol-gel method, followed by sintering at 550-650 degrees C in a flow of 5% H 2/Ar. The structural transformation of a triclinic alpha-LiVOPO 4 structure to a monoclinic alpha-Li 3V 2(PO 4) 3 structure was observed at higher sintering temperatures (700-800 degrees C in a flow of 5% H 2/Ar). The alpha-Li 3V 2(PO 4) 3 phase was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis, and X-ray absorption near edge spectrum (XANES) techniques. The valence shift of vanadium ions from +4 to +3 states was observed using in situ XANES experiments at V K-edge. The structural transformation is ascertained by the shape changes in pre-edge and near edge area of X-ray absorption spectrum. It was observed that the capacity was enhanced from 140 mAh/g to 164 mAh/g via structural transformation process of LiVOPO 4 to Li 3V 2(PO 4) 3.     

Synthesis of thin Cr3Se4 films from modulated elemental reactants via two amorphous intermediates: a detailed examination of the reaction mechanism

The reaction of Cr/Se multilayers when they are annealed occurs in two steps: interdiffusion of the single layers to an amorphous Cr-Se alloy and crystallization of Cr3Se4. Both reaction steps were characterized using various techniques. At approximately 300 degrees C the layers have interdiffused completely to form a homogeneous amorphous Cr-Se alloy. Short-range order in the alloy was probed with X-ray absorption spectroscopy (XAS) and, according to the results of this, is already very similar to Cr3Se4, which crystallizes around 500 degrees C. Crystallization occurs at a well-defined temperature, whereas crystallite growth proceeds in the whole temperature interval above the crystallization temperature and is not finished at 660 degrees C. The reaction yields a polycrystalline thin film of Cr3Se4 in a preferred orientation exhibiting a (00l) texture. In Cr-rich samples amorphous Cr is present as a by-product. A Cr-Se/Se multilayer was observed as an intermediate in the interdiffusion of some Cr-rich samples which is stable between 200 and 250 degrees C.     

Fractal Characterization of Wide Pore Range Catalysts: Application to Pd-Ag/SiO(2) Xerogels

Fractal analysis has been applied to characterize the structure of Pd-Ag/SiO(2) catalysts dried under vacuum (150 degrees C and 12 hPa) with different concentrations of Pd-Ag. Nitrogen adsorption-desorption, mercury porosimetry, and small-angle X-ray scattering measurements have been used. The different approaches to fractal analysis and their conditions of applicability are briefly described. Results are discussed in relation to those derived previously from classical interpretations. This analysis shows that Pd-Ag/SiO(2) xerogels exhibit a very open self-similar pore structure analogous to the structure of supercritically dried aerogels and that the micropore texture can be tailored by varying the silver content. Copyright 2000 Academic Press.     

Variation of surface properties and textural features of spinel ZnAl2O4 and perovskite LaMnO3 nanoparticles prepared via CTAB-butanol-octane-nitrate salt microemulsions in the reverse and bicontinuous states

Two binary oxides, a spinel, ZnAl2O4, and a typical perovskite, LaMnO3, have been prepared via CTAB-1-butanol-n-octane-nitrate salt microemulsion in the reverse and bicontinuous states. The exact point of the reverse and bicontinuous states of the microemulsion used in the synthesis was determined by conductivity experiments. The materials obtained after heating at 800 degrees C were characterized by XRD analysis for their crystal structure, N2 porosimetry for their surface area and porosity, and SEM and TEM photography for their texture. The ZnAl2O4 spinel obtained via the reverse microemulsion appears in SEM in a more fragmented form and with a higher specific surface area (143.7 m(2)g(-1)), compared to the corresponding solid prepared via the bicontinuous microemulsion, which appears more robust with lower surface area (126.7 m(2)g(-1)). Nevertheless both materials reveal in TEM a sponge-like structure. The perovskite materials LaMnO3 prepared via the reverse microemulsion showed in SEM a peculiar doughnut-like texture, each doughnut-like secondary particle having a diameter of 2 microm. The corresponding sample developed via the bicontinuous microemulsion showed in SEM uniform secondary particles of size approximately 0.2 microm. Both perovskite samples LaMnO3 appear well crystallized with relative low surface areas, 23.7 m(2)g(-1) for the reverse sample and 10.9 m(2)g(-1) for the bicontinuous one. The TEM photographs reveal that both of them, of reversed and bicontinuous origin, are made up of primary nanoparticles in the size range 40-100 nm. In SEM those materials showed a different secondary structure.     

Near equiatomic FeCo nanocrystalline alloy embedded in an alumina aerogel matrix: microstructural features and related magnetic properties

FeCo-Al2O3 nanocomposite aerogels were studied by high-resolution electron microscopy, energy filtered transmission electron microscopy, M?ssbauer spectroscopy, and measurements of static magnetizations and hysteretic behavior. The combined use of such techniques provided insights on the formation of bcc FeCo nanocrystalline particles inside the alumina matrix, which is promoted by thermal treatment under hydrogen flow of the parent aerogel. Sample characteristics such as alloy composition and crystallinity, influence of the matrix on the structural evolution, and resulting magnetic properties were investigated as a function of the temperature and time of the reduction treatment.     

Formation of graphitic structures in cobalt- and nickel-doped carbon aerogels

We have prepared carbon aerogels (CAs) doped with cobalt or nickel through sol-gel polymerization of formaldehyde with the potassium salt of 2,4-dihydroxybenzoic acid, followed by ion exchange with M(NO3)2 (where M = Co2+ or Ni2+), supercritical drying with liquid CO2, and carbonization at temperatures between 400 and 1050 degrees C under a N2 atmosphere. The nanostructures of these metal-doped carbon aerogels were characterized by elemental analysis, nitrogen adsorption, high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Metallic nickel and cobalt nanoparticles are generated during the carbonization process at about 400 and 450 degrees C, respectively, forming nanoparticles that are approximately 4 nm in diameter. The sizes and size dispersion of the metal particles increase with increasing carbonization temperatures for both materials. The carbon frameworks of the Ni- and Co-doped aerogels carbonized below 600 degrees C mainly consist of interconnected carbon particles with a size of 15-30 nm. When the samples are pyrolyzed at 1050 degrees C, the growth of graphitic nanoribbons with different curvatures is observed in the Ni- and Co-doped carbon aerogel materials. The distance of graphite layers in the nanoribbons is approximately 0.38 nm. These metal-doped CAs retain the overall open cell structure of metal-free CAs, exhibiting high surface areas and pore diameters in the micro- and mesoporic region.     

Role of urea in the preparation of highly porous nanocomposite aerogels

The preparation of highly porous CoFe2O4-SiO2 nanocomposite aerogels was successfully achieved by a novel sol-gel procedure involving urea-assisted co-gelation of the precursor phases. This method allows fast gelation, giving rise to an aerogel with 97% porosity. The formation of CoFe2O4 nanocrystals homogeneously distributed within the matrix occurs after calcination at 750 degrees C and is complete at 900 degrees C. Despite the high temperature required for the formation of the CoFe2O4 nanocrystals, the high porosity typical of aerogels is still retained.     

Preparation and performance of (Co,Mn)3O4 spinel coating on Crofer alloy by composite electrodeposition and step-heating thermal conversion

The preparation and performance improvement of the spinel coating on the surface of ferritic alloy is of wide interest for its application in the metallic interconnects of the solid oxide fuel cells (SOFCs). The Co Mn₂O₃ composite coating is prepared on the surface of the Crofer alloy by the composite electrodeposition method. A step-heating thermal conversion process is subsequently used to convert the composite coating into a spinel coating, while a direct-heating process is implemented as the control experiment. Isothermal oxidation tests are then carried out for the prepared samples in order to present the high temperature performance. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and area-specific resistance (ASR) are used to analyze the properties of the matrix and coatings. The experimental results reveal that the coatings by step-heating thermal conversion exhibit better performance of electrical conductivity and oxidation resistance than the coatings by direct-heating process. Furthermore, with the increase of oxidation time, the atomic proportion of Cr element diffusing to the surface of the matrix is maintained at about 3%–4% for the samples with spinel coatings by step heating, which effectively prevent the Cr volatilization in the matrix. The preparation of spinel coatings on the ferritic alloy by composite electrodeposition and step-heating thermal conversion is helpful to stimulate new ideas for the development of reliable and cost-effective metallic interconnect.     

NOx储存催化剂Pt/BaAl2O4-Al2O3的XAFS研究

采用共沉淀-浸渍法在不同载体焙烧温度下,制备了不同Al/Ba原子比的Pt/BaAl2O4-Al2O3系列样品.用XRD, XANES, EXAFS,以及NSC (NOx storage capacity）测定等手段对样品的微观结构和NOx储存性能进行了详细的表征.样品中Ba物种是以BaAl2O4和BaCO3两种混合物相的形式存在,且伴随着载体焙烧温度和Ba含量的降低, BaAl2O4物相的分散度变高, NOx储存活性也随之提高,这表明BaAl2O4相的分散度与样品的NOx储存性能密切相关,小颗粒的BaAl2O4相是NOx的主要储存活性中心.在样品中, Pt物种以金属原子簇形式存在,分散度很高,其Pt－Pt壳层配位数较标样Pt粉有显著下降, Pt－Pt键长变短,出现了纳米收缩现象.高分散的小颗粒金属Pt原子簇为捕获和氧化NOx的主要活性中心.     

Pre-edge features of Ti K-edge X-ray absorption near-edge structure for the local structure of sol-gel titanium oxides.

Titanium K-edge X-ray absorption near-edge structure (XANES) spectroscopy is used to examine the local Ti environments in the sol, gel, and xerogels of titanium oxide prepared by a sol-gel method. The xerogels were prepared by heat treatment at 200, 300, 400, 500, and 600 degrees C (denoted xero-200, xero-300, xero-400, xero-500, and xero-600), and the xerogels were doped with Fe(II), Ni(II), and Cu(II) ions (xero-Fe, xero-Ni, and xero-Cu). The local structures of the samples are compared using the pre- and post-edge features of the XANES spectra. Further analysis of the pre-edge features using Gaussian functions provides the energy and height of each peak, and the intensity ratios between peaks. Based on the resulting data, the samples can be classified into three groups: a weak Ti-Ti interaction group, an anatase-like structure group, and an anatase group. The sol, gel, xerogel, and xero-Ni are in the weak Ti-Ti interaction group, and the xero-200, xero-Fe, and xero-Cu are in the anatase-like structure group. The remaining samples are in the anatase group.     

Single-crystalline ZnGa2O4 spinel phosphor via a single-source inorganic precursor route

The synthesis of single-crystalline ZnGa 2O 4 spinel phosphor with intense ultraviolet-emitting properties through a novel single-source inorganic precursor route is reported. This synthetic approach involves the calcination of a Zn-Ga layered double hydroxide precursor followed by selective leaching of the self-generated zinc oxide. Material characterization has been presented by chemical analysis, X-ray diffraction analysis, thermogravimetric-differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance, nuclear magnetic resonance, extended X-ray absorption fine structure analysis, UV-vis, and photoluminescence measurements. The results indicate that a single-crystalline ZnGa 2O 4 spinel with an average particle size of around 150 nm has been obtained at a lower calcination temperature and shorter calcination time compared with that with the high-temperature solid-state reaction method, based on the fact that the large amount of highly dispersed ZnO particles generated during the high-temperature calcination of the single-source inorganic precursor has a remarkable segregation and inhibition effect on the growth of ZnGa 2O 4 spinel. Furthermore, it has been confirmed that that Ga (3+) ions locate not only on the octahedral sites but also on the tetrahedral sites in the matrix of the ZnGa 2O 4 spinel structure, and the Ga-O coordination environment has a great influence on the photoluminescence of ZnGa 2O 4 phosphors.     

X-ray absorption spectroscopy study of H2S sorption on iron-rich soil: characterization of iron-sulfur species

Iron-rich soil after sorption of H(2)S was characterized using X-ray absorption near-edge structural (XANES) and extended X-ray absorption fine structure spectroscopy (EXAFS) for determination the possible products in the present work. EXAFS revealed that the main Fe-S species in the sulfided sample were FeS (troilite) and Fe(1-x)S (pyrrohotite). Iron in the sulfided sample was found to possess a Fe-S bond distance of 2.36 A and a Fe-O bond distance of 1.72 A in the Fe-K-edge spectra whereas the Fe-S bond distance of 2.25 A was determined in the sulfur K-edge spectra. In the second shells, the bond distance of Fe-O-Si or Fe-O-Al with 3.28 A was also observed. No FeS2 (pyrite) was included in the sulfided sample. The formation of Fe(1-x)S was probably attributed to the presence of Fe(3)O(4), a type of spinel structure with a lattice deficiency.