Production and decay of toponiumP-states

Energy levels, production and decay rates of toponiumP-states are calculated and their dependence on different assumptions on the short distance part of the potential is studied. The branching ratio for radiative decays to lower lyingS-states will be very large. Weak decays ofP-states will play an important role for quark masses above 25 GeV. Experimental consequences of our results are discussed.     

Production and decay of269110

In an experiment carried out to identify element 110, we have observed anα-decay chain, that can be unambiguously assigned to²⁶⁹110. In a scries of preexperiments the excitation functions of the fusion reactions⁵⁰Ti +²⁰⁸Pb→²⁵⁸104^* and⁵⁸Fe +²⁰⁸Pb→²⁶⁶108^* were measured with high precision in order to get the optimum projectile energies for the production of these heavy elements. The cross-section maxima of the 1n evaporation channels were observed at excitation energies of 15.6 MeV and 13.4 MeV, respectively. These data result in an optimum excitation energy of 12.3 MeV of the compound nucleus for the production of²⁶⁹110 in the reaction⁶²Ni +²⁰⁸Pb→²⁶⁹110 + 1n. In irradiations at the corresponding beam energy of 311 MeV we have observed a decay chain of 4 subsequent a decays. This can be assigned to the isotope with the mass number 269 of the element 110 on the basis of delayed α-α coincidences. The accurately measured decay data of the daughter isotopes of the elements 108 to 102, obtained in the previous experiments, were used. The isotope²⁶⁹110 decays with a hair-life of (270 _-120 ⁺¹³⁰⁰ ) μs by emission of (11.132±0.020) MeV alpha particles. The production cross-section is (3.3 _-2.7 ^+6.2 ) pb.     

Production and decay of Omegac0

We present an analysis of inclusive Omega(c)(0) baryon production and decays in 230.5 fb(-1) of data recorded with the BABAR detector. Omega(c)(0) baryons are reconstructed in four final states (Omega(-)pi(+), Omega(-)pi(+)pi(0), Omega(-)pi(+)pi(+)pi(-), Xi(-)K(-)pi(+)pi(+)) and the corresponding ratios of branching fractions are measured. We also measure the momentum spectrum in the e(+)e(-) center-of-mass frame. From the spectrum, we observe Omega(c)(0) production from B decays and in cc events, and extract the two rates of production.     

Production and decay of highly-charged fullerene ions

Highly-charged fullerene ions C ₆₀ ^z+ and C ₇₀ ^z+ with charge states up to z=7 have been produced in an electron impact ion source of a two sector field mass spectrometer by using ion source operating conditions similar to those used in EBIT sources. The stability of these ions was investigated quantitatively in the two field free regions of the mass spectrometer. It was found that besides C₂ evaporation the dominant fission process for ions with charges larger than +2 is the loss of a charged C ₂ ⁺ unit via a super-asymmetric charge separation reaction C ₆₀ ^z+ C ₅₈ ^(z–1)+ +C ₂ ⁺ and C ₇₀ ^z+ C ₆₈ ^(z–1)+ +C ₂ ⁺ , respectively. The most important finding from these studies is that this super-asymmetric dissociation reaction proceeds via a three stage reaction sequence involving an electron transfer reaction at the second stage between a receding C₂ unit and the remaining highly-charged fullerene cage.Based on a lecture given by S. Matt at the 1st Euroconference on Atomic Physics with Stored Highly Charged Ions, Heidelberg, 1995.     

Production and decay of polarized hyperon-antihyperon pairs

Polarized hyperon-antihyperon pairs shed light on various unresolved puzzles in contemporary physics: How the strong interaction confines quarks into hadrons, how accurately the Standard Model describes microcosmos and even why our universe consists of so much more matter than antimatter. Thanks to their weak, parity violating decays, hyperons reveal their spin properties. This can be exploited e.g. the decomposition of the electromagnetic structure of hyperons, precision tests of flavour symmetry and searches for CP violation. At the BESIII experiment at BEPC-II, Beijing, China, hyperon-antihyperon pairs can be produced in abundance. Recently collected large data samples have triggered the development of new methods that provide unprecedented precision and a plethora of new results have emerged. When applied at future high-intensity facilities like PANDA and STCF, precision physics will be taken to a new level which can contribute to the solution to the aforementioned puzzles.     

Production and decay of heavy proton drip-line nuclei

Recent work at the NSCL using unusual isotopic beams to study nuclei along the proton drip-line up to A≈95 is presented. The most recent results were obtained by the fragmentation of a ¹⁰⁶Cd beam. Following identification, measurements of the decay properties of such exotic nuclei in specialized measurements of beta-decay half-lives of the stopped ions were undertaken. The results of the studies that focused on the waiting point nuclei ⁶⁵As and ⁶⁹Br in the astrophysical rp-process are also presented. Very recent measurements of the masses of some of these exotic nuclei with a direct time of flight technique are briefly described.     

Production and decay of W boson in electron-positron annihilation

We study the characteristics of the μe events due to e⁺e^? → W⁺W^? and the subsequent leptonic decay of W^±, in the Weinberg-Salam model. The differential cross section for W production is given for non-polarized electron-positron beams as well as transversely polarized beams. The energy angle distributions as well as angular correlations of the final μe events are presented for beam energy of 100 + 100 GeV. Potential backgrounds are also discussed.     

Production of massive stable particles in inflaton decay

We point out that inflaton decays can be a copious source of stable or long-lived particles chi with mass exceeding the reheat temperature T(R) but less than half the inflaton mass. Once higher order processes are included, this statement is true for any chi particle with renormalizable (gauge or Yukawa) interactions. This contribution to the chi density often exceeds the contribution from thermal chi production, leading to significantly stronger constraints on model parameters than those resulting from thermal chi production alone, particularly in models containing stable charged particles.     

Production and decay of subcritical nuclei in a solid solution

The decay of “subcritical” nuclei in a solid solution has been revealed in the investigation of the CuCl phase nucleation kinetics in glass. As soon as “supercritical” nuclei with an average radius R = 1.1 nm are created at 500°C, a sharp temperature increase up to 650°C transforms most nuclei created in the first annealing stage into “subcritical” ones, and this results in the decay of 80% of the nuclei in 5 min, while the remaining 20% of the nuclei grow in size to 2.4 nm. Their growth provides a sixfold increase in the CuCl phase growth rate against that in conventional annealing at 650°C. The kinetic dependences of the nucleation parameters—the amount of the phase and the average radius and concentration of the particles—were determined by the intrinsic absorption spectra of the CuCl nanocrystals. The critical radius of the CuCl nanomelt at 650°C has been estimated as 1.3 nm and the evaporation heat of the CuCl phase molecules in glass, as 13 kJ/mol. It is shown that multistage annealing makes it possible not only to control the parameters of the particles of the new phase, but also to determine the critical parameters of the initial nucleation stage.     

Production and decay of neutralinos in the Next-to-Minimal Supersymmetric Standard Model

Within the framework of the Next-to-Minimal Supersymmetric Standard Model (NMSSM) we study neutralino production (i,j=1, …, 5) at center-of-mass energies between 100 and 600 GeV and the decays of the heavier neutralinos into the LSP plus a fermion pair, a photon or a Higgs boson. For representative gaugino/higgsino mixing scenarios, where the light neutralinos have significant singlet components, we find some striking differences between the NMSSM and the minimal supersymmetric model. Since in the NMSSM neutralino and Higgs sector are strongly correlated, the decay of the second lightest neutralino into a Higgs boson and the LSP often is kinematically possible and even dominant in a large parameter region of typical NMSSM scenarios. Also, the decay rates into final states with a photon may be enhanced.     

Production and decay of excited electrons at the LHC

The European Physical Journal C - We study single production of excited electrons at the CERN LHC through contact interactions of fermions. Subsequent decays of excited electrons to ordinary...     

Production and decay properties of the δ (970) meson

Using an 880 events per microbarn sample of K^?p interactions at 4.2 GeV/c the production and decay properties of the δ (970) have been investigated in the following reactions: K^?p → Σ⁺(1385)ηπ^? and K^?p arΣ⁺(1385)K⁰K^?.     

Production and decay of the Standard Model Higgs boson at LEP200

We collect and update theoretical predictions for the production rate and decay branching fractions of the Standard Model Higgs boson that will be relevant for the Higgs search at LEP200. We make full use of the present knowledge of radiative corrections. We estimate the systematics arising from theoretical and experimental uncertainties.     

Production and decay of xi(c)(0) at BABAR

Using 116.1 fb(-1) of data collected by the BABAR detector, we present an analysis of xi(c)(0) production in B decays and from the cc continuum, with the xi(c)(0) decaying into omega- K+ and xi- pi+ final states. We measure the ratio of branching fractions B(xi(c)(0) --> omega- K+)/B(xi(c)(0) --> xi- pi+) spectrum is measured on and 40 MeV below the upsilon(4S) resonance. From these spectra the branching fraction product B(B --> xi(c)(0)X) x B(xi(c)(0) --> xi- pi+) is measured to be (2.11 +/- 0.19 +/- 0.25) x 10(-4), and the cross-section product sigma(e+ e- --> xi(c)(0)X) x B(xi(c)(0) --> xi- pi+) from the continuum is measured to be (388 +/- 39 +/- 41) fb at a center-of-mass energy of 10.58 GeV.