18-membered cyclic esters derived from glycolide and lactide: preparations, structures and coordination to sodium ions

From reactions between glycolide or lactide (4 equiv.) with 4-dimethylaminopyridine, DMAP (1 equiv.) and NaBPh(4) (1 equiv.) in benzene at 70 degrees C the cyclic ester adducts (CH(2)C(O)O)(6)NaBPh(4) and (CHMeC(O)O)(6)NaBPh(4) are formed respectively. The structures of the salts Na[(S,R,S,R,S,R)-(CH(3)CHC(O)O)(6)](2)BPh(4).CH(3)CN and (CH(2)C(O)O)(6)NaBPh(4).(CH(3)CN)(2) are reported. The cyclic esters were separated by chromatography and the structures of (CH(2)C(O)O)(6), (S,R,R,R,R,R)-(CHMeC(O)O)(6) and (S,S,R,R,R,R)-(CHMeC(O)O)(6) were determined. The (1)H and (13)C NMR data are reported for one of each of the six enantiomers of (CHMeC(O)O)(6) and the two meso isomers. The mechanism for the formation of these 18-membered rings is discussed in terms of an initial reaction between DMAP and NaBPh(4) in hot benzene that produces NaPh and DMAP:BPh(3) in the presence of the monomer lactide. The cyclic esters (CHMeC(O)O)(6) can also be obtained from the reaction between polylactide, PLA, in the presence of DMAP and NaBPh(4). The cyclic esters 3-methyl-1,4-dioxane-2,5-dione and 3,6,6-trimethyl-1,4-dioxane-2,5-dione undergo similar ring enlarging reactions to give cyclic 18-membered ring esters as determined by ESI-MS.     

Sampling and analysing mixtures of sulphate, sulphite, thiosulphate and polythionate

Interpreting the redox chemistry of sulphur in aqueous systems requires the analysis of mixtures of various sulphoxy anions. Previous methods have been too involved to permit high sample throughout if good quality control is to be maintained. Methods based on ion chromatography have been developed for the direct determination of SO(2-)(4), SO(2-)(3), S(2)O(2-)(3), and SCN(-). The determination of thiocyanate permits the indirect determination of polythionates by treatment with cyanide. Formate, acetate, F(-), Cl(-), CO(2-)(3), and PO(3-)(4), do not interfere, but NO(-)(2) and NO(-)(3) interfere with determination of SO(2-)(3),. The sample preservation treatment includes addition of formaldehyde, cation-exchange and cold storage, to retard oxidation of S(2)O(2-)(3), and SO(2-)(3), and inhibits the rearrangement of SO(2-)(3),/S(2)O(2-)(3),/S(n)O(2-)(6), mixtures caused by bimolecular nucleophilic displacement (S(N)2) reactions. Treated samples may be stored for up to 6 weeks with only minor loss of thiosulphate.     

Oxidation with permanganate in acid medium containing fluoride: determination of bisulphite

The factors affecting the success of both visual and potentiometric end-point detection in titration of bisulphite with permanganate in the presence of fluoride are examined. The optimum conditions are 0.02M H(2)SO(4) and 0.24-0.38M NaF. The oxidation product comprises dithionate and sulphate according to the overall reaction MnO(4)(-) + H(+) + 2HF(2)(-) + 3HSO(3)(-) right harpoon over left harpoon MnF(4)(-) + S(2)O(6)(2-) + SO(4)(2-) + 3H(2)O. The reverse titration is also satisfactory, but proceeds quantitatively according to MnO(4)(2-) + 2HF(2)(-) + 2HSO(3)(-) right harpoon over left harpoon MnF(4)(-) + 2SO(4)(2-) + 2H(2)O.     

Polymetallic clusters of iron(III) with derivatised salicylaldoximes

The synthesis and magnetic properties of the compounds [HNEt(3)][Fe(2)(OMe)(Ph-sao)(2) (Ph-saoH)(2)].5MeOH (1.5MeOH), [Fe(3)O(Et-sao)(O(2)CPh)(5)(MeOH)(2)].3MeOH (2.3MeOH), [Fe(4)(Me-sao)(4)(Me-saoH)(4)] (3), [HNEt(3)](2)[Fe(6)O(2)(Me-sao)(4)(SO(4))(2)(OMe)(4)(MeOH)(2)] (4), [Fe(8)O(3)(Me-sao)(3)(tea)(teaH)(3)(O(2)CMe)(3)] (5), [Fe(8)O(3)(Et-sao)(3)(tea)(teaH)(3)(O(2)CMe)(3)] (6), and [Fe(8)O(3)(Ph-sao)(3)(tea)(teaH)(3)(O(2)CMe)(3)] (7) are reported (Me-saoH(2) is 2'-hydroxyacetophenone oxime, Et-saoH(2) is 2'-hydroxypropiophenone oxime and Ph-saoH(2) is 2-hydroxybenzophenone oxime). 1-7 are the first Fe(III) compounds synthesised using the derivatised salicylaldoxime ligands, R-saoH(2). 1 is prepared by treatment of Fe(2)(SO(4))(3).6H(2)O with Ph-saoH(2) in the presence of NEt(3) in MeOH; 2 prepared by treatment of Fe(ClO(4))(2).6H(2)O with Et-saoH(2) and NaO(2)CPh in the presence of NEt(4)OH in MeOH; 3 prepared by treatment of Fe(ClO(4))(2).6H(2)O with Me-saoH(2) and NaO(2)CCMe(3) in the presence of NEt(4)OH in MeOH; and 4 prepared by treatment of Fe(2)(SO(4))(3).6H(2)O with Me-saoH(2) in the presence of NEt(3) in MeOH. 4 is a rare example of a polynuclear iron complex containing a coordinated SO(4)(2-) ion. Compounds 5-7 are prepared by treatment of Fe(O(2)CMe)(2) with Me-saoH(2) (5), Et-saoH(2) (6), Ph-saoH(2) (7) in the presence of H(3)tea (triethanolamine) in MeOH, and represent the largest nuclearity Fe(III) clusters containing salicyladoxime-based ligands, joining a surprisingly small family of characterised octanuclear Fe complexes. Variable temperature magnetic susceptibilty measurements of 1, 3 and 5-7 reveal all five complexes possess S = 0 spin ground states; 2 possesses an S = 1/2 spin ground state, while 4 has an S = 4 +/- 1 spin ground state.     

A family of manganese rods: syntheses, structures, and magnetic properties

The reaction of the mixed-valent metal triangles [Mn(3)O(O(2)CR)(6)(py)(3)] (R = CH(3), Ph, C(CH(3))(3)) with the tripodal ligands H(3)thme (1,1,1-tris(hydroxymethyl)ethane) and H(3)tmp (1,1,1-tris(hydroxymethyl)propane) in MeCN, produces a family of manganese rodlike complexes whose structures are all derived from a series of edge-sharing triangles. Variable temperature direct current (dc) magnetic susceptibility data were collected for all complexes in the 1.8-300 K temperature range in fields up to 7.0 T. Complex 1, [Mn(12)O(4)(OH)(2)(PhCOO)(12)(thme)(4)(py)(2)], has an S = 7 ground state with the parameters g = 1.98 and D = -0.13 K. Complex 2, [Mn(8)O(4)((CH(3))(3)CCO(2))(10)(thme)(2)(py)(2)] has a ground state of S = 6, with g = 1.81 and D = -0.36 K. Complex 3, [Mn(7)O(2)(PhCO(2))(9)(thme)(2)(py)(3)], has a spin ground states of S = 7 with the parameters g = 1.78 and D = -0.20 K. The best fit for complex 4, [Mn(6)((CH(3))(3)CCO(2))(8)(tmp)(2)(py)(2)], gave a spin ground state of S = 3 with the parameters g = 1.73 and D = -0.75 K, but was of poorer quality than that normally obtained. The presence of multiple Mn(2+) ions in the structure of 4 leads to the presence of low-lying excited states with energy levels very close to the ground state, and in the case of complex 5, [Mn(6)(CH(3)CO(2))(6)(thme)(2)(H(2)tea)(2)], no satisfactory fit of the data was obtained. DFT calculations on 4 and 5 indicate complexes with spin ground states of S = 4 and S = 0 respectively, despite their topological similarities. Single-crystal hysteresis loop and relaxation measurements show complex 1 to be a SMM.     

Kinetics and mechanisms of S(IV) reductions of bromite and chlorite ions

The reaction of bromite with aqueous S(IV) is first order in both reactants and is general-acid catalyzed. The reaction half-lives vary from 5 ms (p[H+] 5.9) to 210 s (p[H+] 13.1) for 0.7 mM excess S(IV) at 25 degrees C. The proposed mechanism includes a rapid reaction (k(1) = 3.0 x 10(7) M(-1) s(-1)) between BrO(2)(-) and SO(3)(2-) to form a steady-state intermediate, (O(2)BrSO(3))(3-). General acids assist the removal of an oxide ion from (O(2)BrSO(3))(3-) to form OBrSO(3)(-), which hydrolyzes rapidly to give OBr(-) and SO(4)(2-). Subsequent fast reactions between HOBr/OBr(-) and SO(3)(2-) give Br(-) and SO(4)(2-) as final products. In contrast, the chlorite reactions with S(IV) are 5-6 orders of magnitude slower. These reactions are specific-acid, not general-acid, catalyzed. In the proposed mechanism, ClO(2)(-) and SO(3)H(-)/SO(2) react to form (OClOSO(3)H)(2)(-) and (OClOSO(2))(-) intermediates which decompose to form OCl(-) and SO(4)(2-). Subsequent fast reactions between HOCl/OCl(-) and S(IV) give Cl- and SO(4)(2-) as final products. SO(2) is 6 orders of magnitude more reactive than SO(3)H-, where k(5)(SO(2)/ClO(2)(-)) = 6.26 x 10(6) M(-1) s(-1) and k(6)(SO(3)H(-)/ClO(2)(-)) = 5.5 M(-1) s(-1). Direct reaction between ClO(2)(-) and SO(3)(2-) is not observed. The presence or absence of general-acid catalysis leads to the proposal of different connectivities for the initial reactive intermediates, where a Br-S bond forms with BrO(2)(-) and SO(3)(2-), while an O-S bond forms with ClO(2)(-) and SO(3)H-.     

Kinetics and mechanisms of the ozone/bromite and ozone/chlorite reactions

Ozone reactions with XO(2)(-) (X = Cl or Br) are studied by stopped-flow spectroscopy under pseudo-first-order conditions with excess XO(2)(-). The O(3)/XO(2)(-) reactions are first-order in [O(3)] and [XO(2)(-)], with rate constants k(1)(Cl) = 8.2(4) x 10(6) M(-1) s(-1) and k(1)(Br) = 8.9(3) x 10(4) M(-1) s(-1) at 25.0 degrees C and mu = 1.0 M. The proposed rate-determining step is an electron transfer from XO(2)(-) to O(3) to form XO(2) and O(3)(-). Subsequent rapid reactions of O(3)(-) with general acids produce O(2) and OH. The OH radical reacts rapidly with XO(2)(-) to form a second XO(2) and OH(-). In the O(3)/ClO(2)(-) reaction, ClO(2) and ClO(3)(-) are the final products due to competition between the OH/ClO(2)(-) reaction to form ClO(2) and the OH/ClO(2) reaction to form ClO(3)(-). Unlike ClO(2), BrO(2) is not a stable product due to its rapid disproportionation to form BrO(2)(-) and BrO(3)(-). However, kinetic spectra show that small but observable concentrations of BrO(2) form within the dead time of the stopped-flow instrument. Bromine dioxide is a transitory intermediate, and its observed rate of decay is equal to half the rate of the O(3)/BrO(2)(-) reaction. Ion chromatographic analysis shows that O(3) and BrO(2)(-) react in a 1/1 ratio to form BrO(3)(-) as the final product. Variation of k(1)(X) values with temperature gives Delta H(++)(Cl) = 29(2) kJ mol(-1), DeltaS(++)(Cl) = -14.6(7) J mol(-1) K(-1), Delta H(++)(Br) = 54.9(8) kJ mol(-1), and Delta S(++)(Br) = 34(3) J mol(-1) K(-1). The positive Delta S(++)(Br) value is attributed to the loss of coordinated H(2)O from BrO(2)(-) upon formation of an [O(3)BrO(2)(-)](++) activated complex.     

The ammine, thiosulfato, and mixed ammine/thiosulfato complexes of silver(I) and gold(I)

The M(I)-NH(3), M(I)-S(2)O(3)(2)(-), and M(I)-S(2)O(3)(2)(-)-NH(3) systems (M = Ag, Au) were studied at 25 degrees C and at I = 0.1 M (NaClO(4)) using a variety of analytical techniques. For the Ag(I)-NH(3)-S(2)O(3)(2)(-) system, AgS(2)O(3)NH(3)(-) was detected with formation constant log beta(111) (for the reaction Ag(+) + S(2)O(3)(2)(-) + NH(3) <--> AgS(2)O(3)NH(3)(-)) of 11.2, 10.4, and 10.8 on the basis of silver potentiometry, UV-vis spectrophotometry, and hydrodynamic voltammetry, respectively. Also, the values of log beta(101)(AgNH(3)(+)), log beta(102)(Ag(NH(3))(2)(+)), log beta(110)(AgS(2)O(3)(-)), and log beta(120)(Ag(S(2)O(3))(2)(3)(-)), obtained from silver potentiometry, were 3.59, 7.0, 8.97, 13.1, respectively. In the case of the ammine complexes, the log beta(101)(AgNH(3)(+)) and log beta(102)(Ag(NH(3))(2)(+)) values were found to be 3.5 and 7.1, respectively, from the UV-vis spectrophotometric experiments. The mixed species AuS(2)O(3)NH(3)(-) was detected in UV-vis spectrophotometric, hydrodynamic voltammetric, and potentiometric experiments with the stepwise formation constants (log K(111)) of -4.0, -3.5, -3.8, respectively, for the reaction Au(S(2)O(3))(2)(3)(-) + NH(3) <--> AuS(2)O(3)NH(3)(-) + S(2)O(3)(2)(-). At higher [NH(3)]/[S(2)O(3)(2)(-)] ratios (>10(5)), the formation of Au(NH(3))(2)(+) was also detected in spectrophotometric and potentiometric experiments with stepwise formation constants (log K(102)) of -5.4 and -5.3, respectively, according to the reaction AuS(2)O(3)NH(3)(-) + NH(3) <--> Au(NH(3))(2)(+) + S(2)O(3)(2)(-).     

Synthesis, characterization, and stereochemistry of oxorhenium(V) complexes with 2-aminoethanethiolate

A series of oxorhenium(V) complexes with 2-aminoethanethiolate (aet), [ReO(aet-N,S)(D-pen-N,O,S)] (2), [[ReO(aet-N,S)(2)](2)O] (3), [ReO(Cl)(aet-N,S)(2)] (4), and [ReO(aet-N,S)(Haet-S)(2)]Cl(2) ([5]Cl(2)) was newly prepared starting from ReO(4)(-). The reaction of NH(4)ReO(4) with a 1:1 mixture of Haet.HCl and D-H(2)pen (D-penicillamine) in the presence of SnCl(2).2H(2)O in water gave 2, 3, and the known complex [ReO(D-Hpen-N,S)(D-pen-N,O,S)] (1). These complexes were fractionally precipitated by controlling the pH of the reaction solution. The complex 2 was also prepared in a higher yield by a similar reaction using methanol as a solvent. The crystal structure of 2 was determined by X-ray crystallography; 2 crystallizes in the tetragonal space group P4(3) with a = 9.621(1), c = 12.911(1) A, V = 1195.0(3) A(3), and Z = 4. The oxorhenium(V) core in 2 is coordinated by a bidentate-N,S aet ligand and a tridentate-N,O,S D-pen ligand, having a distorted octahedral geometry with a cis-N cis-S configuration in the equatorial plane perpendicular to the O-Re-O axis. The 1:2 reaction of NH(4)ReO(4) with Haet.HCl in the presence of SnCl(2).2H(2)O in methanol produced 4, which is interconvertible with 3, while the corresponding 1:3 reaction resulted in the isolation of [5]Cl(2). The complexes 4 and 5 were also structurally characterized; 4 crystallizes in the monoclinic space group P2(1)/c with a = 6.839(1), b = 10.0704(6), c = 14.1075(8) A, beta = 91.729(8) degrees, V = 971.2(2) A(3), and Z = 4, while [5]Cl(2) crystallizes in the triclinic space group P1 with a = 11.938(3), b = 12.366(3), c = 5.819(1) A, alpha = 102.71(2), beta = 101.28(2), gamma = 75.41(2) degrees, V = 802.0(3) A(3), and Z = 2. In 4, the oxorhenium(V) core is octahedrally coordinated by two bidentate-N,S aet ligands, which form a cis-N cis-S configurational equatorial plane with a Cl(-) ion trans to the oxo ligand. On the other hand, the oxorhenium(V) core in [5](2+) is coordinated by one bidenate-N,S aet and two monodentate-S Haet ligands, having a distorted trigonal-bipyramidal geometry with S and N donors at the apical positions.     

Sensitization of photo-reduction of the polyoxometalate anions [S(2)M(18)O(62)](4-) (M = Mo, W) in the visible spectral region by the [Ru(bpy)(3)](2+) cation

Voltammetric, photo-physical and photo-electrochemical properties of the Dawson polyoxometalate anions alpha-[S(2)M(18)O(62)](4-) (M = Mo, W) are presented, both in the presence and absence of a series of [Ru(II)L(n)](+/2+) cations [L(n) = (bpy)(3), (bpy)(2)(Im)(2), (bpy)(2)(dpq), (bpy)(2)(box) and (biq)(2)(box)]. Electrochemical processes for both the anion and Ru(II/III) couples were detected in solutions of the salts [Ru(II)L(n)](2)[S(2)M(18)O(62)] in dimethylformamide (0.1 M Bu(4)NPF(6)) by both cyclic and hydrodynamic voltammetries. Responses were also detected when the solid salts were adhered to the surface of a glassy carbon electrode in contact with an electrolyte in which they are insoluble (CH(3)CN; 0.1M Bu(4)NPF(6)). Photolysis experiments were performed on solutions of the salts [R(4)N](4)[S(2)M(18)O(62)] (R = n-butyl or n-hexyl) and [Ru(II)L(n)](2)[S(2)M(18)O(62)] at 355 and 420 nm in dimethylformamide and acetonitrile in the presence and absence of benzyl alcohol (10% v/v). When associated with [Ru(bpy)(3)](2+), the molybdate anion exhibited a large increase in the quantum yield for photo-reduction at 420 nm. The quantum yield for the tungstate analogue was lower but the experiments again provided clear evidence for sensitization of the photo-reduction reaction in the visible spectral region. The origin of this sensitization is ascribed to the new optical transition observed around 480 nm in static ion clusters {[Ru(bpy)(3)][S(2)M(18)O(62)]}(2-) and {[Ru(bpy)(3)](2)[S(2)M(18)O(62)]} present in solution. Measurable photocurrents resulted from irradiation of solutions of the anions with white light in the presence of the electron donor dimethylformamide. Evidence is also presented for possible quencher-fluorophore interactions in the presence of certain [Ru(II)L(n)](+) cations.     

Synthetic entry into polynuclear bismuth-manganese chemistry: high oxidation state Bi(III)2Mn(IV)6 and Bi(III)Mn(III)10 complexes

The first high nuclearity, mixed-metal Bi(III)/Mn(IV) and Bi(III)/Mn(III) complexes are reported. The former complexes are [Bi(2)Mn(IV)(6)O(9)(O(2)CEt)(9)(HO(2)CEt)(NO(3))(3)] (1) and [Bi(2)Mn(IV)(6)O(9)(O(2)CPh)(9)(HO(2)CPh)(NO(3))(3)] (2) and were obtained from the comproportionation reaction between Mn(O(2)CR)(2) and MnO(4)(-) in a 10:3 ratio in the presence of Bi(NO(3))(3) (3 equiv) in either a H(2)O/EtCO(2)H (1) or MeCN/PhCO(2)H (2) solvent medium. The same reaction that gives 2, but with Bi(O(2)CMe)(3) and MeNO(2) in place of Bi(NO(3))(3) and MeCN, gave the lower oxidation state product [BiMn(III)(10)O(8)(O(2)CPh)(17)(HO(2)CPh)(H(2)O)] (3). Complexes 1 and 2 are near-isostructural and possess an unusual and high symmetry core topology consisting of a Mn(IV)(6) wheel with two central Bi(III) atoms capping the wheel on each side. In contrast, the [BiMn(III)(10)O(8)](17+) core of 3 is low symmetry, comprising a [BiMn(3)(μ(3)-O)(2)](8+) butterfly unit, four [BiMn(3)(μ(4)-O)](10+) tetrahedra, and two [BiMn(2)(μ(3)-O)](7+) triangles all fused together by sharing common Mn and Bi vertices. Variable-temperature, solid-state dc and ac magnetization data on 1-3 in the 1.8-300 K range revealed that 1 and 2 possess an S = 0 ground state spin, whereas 3 possesses an S = 2 ground state. The work offers the possibility of access to molecular analogs of the multifunctional Bi/Mn/O solids that are of such great interest in materials science.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

Ligand Substitution Reactions at the Nickel of [Mo(3)NiS(4)(H(2)O)(10)](4+) with Two Water Soluble Phosphines, CO, Br(-), I(-), and NCS(-) and the Inertness of the 1,4,7-Triazacyclononane (L) Complex [Mo(3)(NiL)S(4)(H(2)O)(9)](4+)

Comparisons (25 degrees C) are made of substitution reactions, X replacing H(2)O, at the tetrahedral Ni of the heterometallic sulfido cuboidal cluster [Mo(3)NiS(4)(H(2)O)(10)](4+), I = 2.00 M (LiClO(4)). Stopped-flow formation rate constants (k(f)/M(-)(1) s(-)(1)) for six X reagents, including two water soluble air-stable phosphines, 1,3,5-triaza-7-phosphaadamantane PTA (119) and tris(3-sulfonatophenyl)phosphine TPPTS(3)(-) (58), and CO (0.66), Br(-) (14.6), I(-) (32.3), and NCS(-) (44) are reported alongside the previous value for Cl(-) (9.4). A dependence on [H(+)] is observed with PTA, which gives an unreactive form confirmed by NMR as N-protonated PTA (acid dissociation constant K(a) = 0.61 M), but in no other cases with [H(+)] in the range 0.30-2.00 M. The narrow spread of rate constants for all but the CO reaction is consistent with an I(d) dissociative interchange mechanism. In addition NMR studies with H(2)(17)O enriched solvent are too slow for direct determination of the water-exchange rate constant indicating a value <10(3) s(-)(1). Equilibrium constants/M(-)(1) for 1:1 complexing with the different X groups at the Ni are obtained for PTA (2040) and TPPTS(3)(-) (8900) by direct spectrophotometry and from kinetic studies (k(f)/k(b)) for Cl(-) (97), Br(-) (150), NCS(-) (690), and CO (5150). No NCS(-) substitution at the Ni is observed in the case of the heterometallic cube [Mo(3)Ni(L)S(4)(H(2)O)(9)](4+), with tridentate 1,4,7-triazacyclononane(L) coordinated to the Ni. Substitution of NCS(-) for H(2)O, at the Mo's of [Mo(3)NiS(4)(H(2)O)(10)](4+) and [Mo(3)(NiL)S(4)(H(2)O)(9)](4+) are much slower secondary processes, with k(f) = 2.7 x 10(-)(4) M(-)(1) s(-)(1) and 0.94 x 10(-)(4) M(-)(1) s(-)(1) respectively. No substitution of H(2)O by TPPTS(3)(-) or CO is observed over approximately 1h at either metal on [Mo(3)FeS(4)(H(2)O)(10)](4+), on [Mo(4)S(4)(H(2)O)(12)](5+) or [Mo(3)S(4)(H(2)O)(9)](4+).     

Adsorption of sulfur dioxide on hematite and goethite particle surfaces

The adsorption of sulfur dioxide (SO(2)) on iron oxide particle surfaces at 296 K has been investigated using X-ray photoelectron spectroscopy (XPS). A custom-designed XPS ultra-high vacuum chamber was coupled to an environmental reaction chamber so that the effects of adsorbed water and molecular oxygen on the reaction of SO(2) with iron oxide surfaces could be followed at atmospherically relevant pressures. In the absence of H(2)O and O(2), exposure of hematite (alpha-Fe(2)O(3)) and goethite (alpha-FeOOH) to SO(2) resulted predominantly in the formation of adsorbed sulfite (SO(3)(2-)), although evidence for adsorbed sulfate (SO(4)(2-)) was also found. At saturation, the coverage of adsorbed sulfur species was the same on both alpha-Fe(2)O(3) and alpha-FeOOH as determined from the S2p : Fe2p ratio. Equivalent saturation coverages and product ratios of sulfite to sulfate were observed on these oxide surfaces in the presence of water vapor at pressures between 6 and 18 Torr, corresponding to 28 to 85% relative humidity (RH), suggesting that water had no effect on the adsorption of SO(2). In contrast, molecular oxygen substantially influenced the interactions of SO(2) with iron oxide surfaces, albeit to a much larger extent on alpha-Fe(2)O(3) relative to alpha-FeOOH. For alpha-Fe(2)O(3), adsorption of SO(2) in the presence of molecular oxygen resulted in the quantitative formation of SO(4)(2-) with no detectable SO(3)(2-). Furthermore, molecular oxygen significantly enhanced the extent of SO(2) uptake on alpha-Fe(2)O(3), as indicated by the greater than two-fold increase in the S2p : Fe2p ratio. Although SO(2) uptake is still enhanced on alpha-Fe(2)O(3) in the presence of molecular oxygen and water, the enhancement factor decreases with increasing RH. In the case of alpha-FeOOH, there is an increase in the amount of SO(4)(2-) in the presence of molecular oxygen, however, the predominant surface species remained SO(3)(2-) and there is no enhancement in SO(2) uptake as measured by the S2p : Fe2p ratio. A mechanism involving molecular oxygen activation on oxygen vacancy sites is proposed as a possible explanation for the non-photochemical oxidation of sulfur dioxide on iron oxide surfaces. The concentration of these sites depends on the exact environmental conditions of RH.     

Label-free colorimetric sensing of cobalt(II) based on inducing aggregation of thiosulfate stabilized gold nanoparticles in the presence of ethylenediamine

As a sensitive and selective analytical technique, gold nanoparticles-based colorimetric sensing was characterized by its simplicity and cost-effectiveness. Specific methods have been extensively developed for different targets in diverse samples. In this study, a label-free method for sensing Co(2+) in aqueous solutions was described. The target was achieved by the induced aggregation of thiosulfate (S(2)O(3)(2-)) stabilized gold nanoparticles (AuNPs) in the presence of ethylenediamine (en). Co(2+) first reacted with en and formed complexes of Co(en)(3)(2+) in aqueous solutions, which was followed by the oxidation of Co(en)(3)(2+) to Co(en)(3)(3+) by dissolved oxygen. Co(en)(3)(3+) then attacked S(2)O(3)(2-) ligands adsorbed on the AuNPs' surfaces, forming positively charged (en)(2)CoS(2)O(3)(+) on the AuNPs' surfaces, which reduced the surface charges of AuNPs and induced the aggregation of AuNPs. The process was accompanied by a red-shift in the adsorption spectrum and a visible colour change from wine red to blue. Potential effects of relevant experimental conditions, including pH, concentrations of S(2)O(3)(2-) and en, and incubation time were evaluated for optimization of the method. The proposed method is sensitive (LOD = 0.0 4 μM or 2.36 ppb) and selective (by at least 100-fold over other metal ions except for Cu(2+)) toward Co(2+) with a linear range from 0.1 to 0.7 μM. The cost-effective method allows rapid and simple determination of the concentrations of Co(2+) ions in drinking water.     

Synthesis and characterization of mixed-valent manganese phosphonate cage complexes

The reaction of phenylphosphonic acid (PhPO(3)H(2)) with the mixed-valent basic oxo-centered manganese triangle [Mn(3)O(O(2)CCMe(3))(6)(py)(3)] (1; where py=pyridine) in the presence of a suitable base gives four different manganese clusters depending on the identity of the base. The syntheses and structural characterization of [Mn(18)(mu(3)-O)(8)(PhPO(3))(14)(O(2)CCMe(3))(12)(py)(6)(H(2)O)(2)] (2), [Mn(7)(mu(3)-O)(3)(O(3)PPh)(3)(O(2)CCMe(3))(8)(py)(3)] (3), [Mn(9)Na(mu(3)-O)(4)(mu(4)-O)(2)(O(3)PPh)(2)(O(2)CCMe(3))(12)(H(2)O)(2)(H(2)O)(0.67)(Py)(0.33)] (4), and [Mn(13)(mu(3)-O)(8)(OMe)(8)(O(3)PPh)(4)(O(2)CCMe(3))(10)] (5) are described. Complexes 4 and 5 are homovalent Mn(III) cages, while 2 and 3 contain divalent, trivalent, and/or tetravalent ions. All the manganese centers are valence-localized, the octahedral Mn(III) sites being recognizable by marked Jahn-Teller distortions. The magnetic properties of compounds 2-5 have been investigated in the polycrystalline state by magnetic susceptibility and high-field magnetization measurements, which reveal that spin ground states vary from 0< or =S > or =8. AC susceptibility measurements performed on 4 and 5, in the 1.6-10.0 K ranges show the presence of out of AC susceptibility signal (chi(M)') for 4, and an effective energy barrier (U(eff)) for the re-orientation of the magnetization is found to be 17 K, but for 5, the chi(M)' maximum is found to be below 1.5 K.     

Syntheses of novel exo and endo isomers of ansa-substituted fluorophosphazenes and their facile transformations into spiro isomers in the presence of fluoride ions

Reactions of the dilithiated diols RCH2P(S)(CH2OLi)2 [R = Fc (1), Ph (2) (Fc = ferrocenyl)] with N3P3F6 in equimolar ratios at -80 degrees C result exclusively in the formation of two structural isomers of ansa-substituted compounds, endo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3a), Ph (4a)] and exo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3b), Ph (4b)], which are separated by column chromatography. Increasing the reaction temperature to -40 degrees C results in more of the exo isomers 3b and 4b at the expense of the endo isomers. The formation of the ansa-substituted compounds is found to depend on the dilithiation of the diols, as a reaction of the silylated phosphine sulfide FcCH2P(S)(CH2OSiMe3)2 (5) with N3P3F6 in the presence of CsF does not yield either 3a or 3b but instead gives the spiro isomer [FcCH2P(S)(CH2O)2 PN](F2PN)2 (6) as the disubstitution product of N3P3F6. The ansa isomers 3a and 3b are transformed into the spiro compound 6 in the presence of catalytic amounts of CsF at room temperature in THF, while 4a and 4b are transformed into the spiro compound [PhCH2P(S)(CH2O)2PN](F2PN)2 (7) under similar conditions. The novel conversions of ansa-substituted phosphazenes into spirocyclic phosphazenes were monitored by time-dependent 31P NMR spectroscopy. The effect of temperature on a transformation was studied by carrying out reactions at various temperatures in the range from -60 to +33 degrees C for 3b. In addition, compounds 3a, 3b, 4a, and 6 were structurally characterized. In the case of the ansa compounds, the nitrogen atom flanked by the bridging phosphorus sites was found to deviate significantly from the plane defined by the five remaining atoms of the phosphazene ring.     

Studies of an enneanuclear manganese single-molecule magnet

The reaction of [Mn(3)O(O(2)CMe)(6)(py)(3)] with the tripodal ligand H(3)thme (1,1,1-tris(hydroxymethyl)ethane) affords the enneanuclear complex [Mn(9)O(7)(O(2)CCH(3))(11)(thme)(py)(3)(H(2)O)(2)] 1.1MeCN.1Et(2)O. The metallic skeleton of complex 1 comprises a series of 10 edge-sharing triangles that describes part of an idealized icosahedron. Variable temperature direct current (dc) magnetic susceptibility data collected in the 1.8-300 K temperature range and in fields up to 5.5 T were fitted to give a spin ground state of S = (17)/(2) with an axial zero-field splitting parameter D = -0.29 cm(-)(1). Ac susceptibility studies indicate frequency-dependent out-of-phase signals below 4 K and an effective barrier for the relaxation of the magnetization of U(eff) = 27 K. Magnetic measurements of single crystals of 1 at low temperature show time- and temperature-dependent hysteresis loops which contain steps at regular intervals of field. Inelastic neutron scattering (INS) studies on complex 1 confirm the S = (17)/(2) ground state and analysis of the INS transitions within the zero-field split ground state leads to determination of the axial anisotropy, D = -0.249 cm(-)(1), and the crystal field parameter, B(4)(0) = 7(4) x 10(-)(6) cm(-)(1). Frequency domain magnetic resonance spectroscopy (FDMRS) determined the same parameters as D = -0.247 cm(-)(1) and B(4)(0) = 4.6 x 10(-)(6) cm(-)(1). DFT calculations are fully consistent with the experimental findings of two Mn(II) and four Mn(III) ions "spin up" and three Mn(IV) ions "spin down" resulting in the S = (17)/(2) spin ground state of the molecule, with D = -0.23 cm(-)(1) and U = 26.2 K.     

Unusual oxidation of phosphines employing water as the oxygen atom source and tris(benzene-1,2-dithiolate)molybdenum(VI) as the oxidant. A functional molybdenum hydroxylase analogue system

The kinetics of the reaction of Mo(VI)(S2C6H4)3 with organic phosphines to produce the anionic Mo(V) complex, Mo(V)(S2C6H4)3-, and phosphine oxide have been investigated. Reaction rates, monitored by UV-vis stopped-flow spectrophotometry, were studied in THF/H2O media as a function of the concentration of phosphine, molybdenum complex, pH, and water concentration. The reaction exhibits pH-dependent phosphine saturation kinetics and is first-order in complex concentration. The water concentration strongly enhances the reaction rate, which is consistent with the formation of Mo(VI)(S2C6H4)3(H2O) adduct as a crucial intermediate. The observed pH dependence of the reaction rate would arise from the distribution between acid and basic forms of this adduct. Apparently, the electrophilic attack by the phosphine at the oxygen requires the coordinated water to be in the unprotonated hydroxide form, Mo(VI)(S2C6H4)3(HO)-. This is followed by the concerted abstraction of 2e-, H+ by the Mo(VI) center to give Mo(IV)(S2C6H4)3(2-), H+, and the corresponding phosphine oxide. However, this Mo(IV) complex product is oxidized rapidly to Mo(V)(S2C6H4)3- via comproportionation with unreacted Mo(VI)(S2C6H4)3. The Mo(V) complex thus formed can be oxidized to the starting Mo(VI) complex upon admission of O2. Consequently, Mo(VI)(S2C6H4)3 is a catalyst for the autoxidation of phosphines in the presence of water. Additionally, there was a detectable variation in the reactivity for a series of tertiary phosphines. The rate of Mo(VI) complex reduction increases as does the phosphine basicity: (p-CH3C6H4)3P > (C6H5)3P > (p-ClC6H4)3P. Oxygen isotope tracing confirms that water rather than dioxygen is the source of the oxygen atom which is transferred to the phosphine. Such reactivity parallels oxidase activity of xanthine enzyme with phosphine as oxygen atom acceptor and Mo(VI)(S2C6H4)3 as electron acceptor.     

Hydrogen/chlorine exchange reactions of gaseous carbanions

Gas-phase reactions of three typical carbanions CH(2)NO(2)(-), CH(2)CN(-), and CH(2)S(O)CH(3)(-) with the chloromethanes CH(2)Cl(2), CHCl(3), and CCl(4), examined by tandem mass spectrometry, show a novel hydrogen/chlorine exchange reaction. For example, reaction between the nitromethyl anion CH(2)NO(2)(-) and carbon tetrachloride CCl(4) forms the ion CHClNO(2)(-). The suggested reaction mechanism involves nucleophilic attack by CH(2)NO(2)(-) at the chlorine of CCl(4) followed by proton transfer within the resulting complex [CH(2)ClNO(2) + CCl(3)(-)] to form CHClNO(2)(-) and CHCl(3). Two other carbanions CH(2)CN(-) and CH(2)S(O)CH(3)(-) also undergo the novel hydrogen/chlorine exchange reactions with CCl(4) but to a much smaller extent, their higher nucleophilicities favoring competitive nucleophilic attack reactions. Proton abstraction is the exclusive pathway in the reactions of these carbanions with CHCl(3). While CH(2)CN(-) and CH(2)S(O)CH(3)(-) promote mainly proton abstraction and nucleophilic displacement in reactions with CH(2)Cl(2), CH(2)NO(2)(-) does not react.