Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

Spectrophotometric determination of tungsten(VI) with rutin

A new spectrophotometric method for the determination of microamounts of tungsten(VI) with rutin has been developed. The effect of a large number of foreign ions was investigated, and the separation and determination of tungsten in the presence of the interfering ions examined are presented.     

Factor analysis of the tungsten(VI)-rutin system

Factor analysis of the tungsten(VI)-rutin system has shown the equilibrium constants for formation of the 1:2 and 1:1 tungsten-rutin complexes to be very different, and that the presence of the 1:1 complex does not significantly reduce the precision of tungsten determination within the normal range of analysis. Calculated spectra of the two complexes are presented.     

Pyrogallol red and bromopyrogallol red in new optical methods for the determination of molybdenum(VI) and tungsten(VI)

The complexation of molybdenum(VI) and tungsten(VI) with pyrogallol red (PR) and bromopyrogallol red (BPR) in the presence of a cationic surfactant, cetylpyridinium bromide was studied. Conditions of the preconcentration of molybdenum(VI) and tungsten(VI) as complexes with PR and BPR on Silochrom S-120 were found. The concentration coefficients were no lower than 67 for a volume of the aqueous phase of 20 mL and a mass of the sorbent of 0.3 g. Chromaticity characteristics of the complexes in solutions and on the sorbent were determined. It was demonstrated that the complex of molybdenum(VI) with BPR in the presence of cetylpyridinium bromide should be used in the analysis of materials with low concentrations of molybdenum.     

Ultraviolet spectrophotometric determination of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate

A simple and rapid ultraviolet spectrophotometric method is proposed for the determination of trace amounts of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate (APDC). The method is based on measurement of the absorbance of the tungsten APDC complex in fairly concentrated hydrochloric acid medium; no extraction is required. The complex is formed at an initial acidity of 6M hydrochloric acid and has an absorption maximum at 250 nm. The high absorption of the reagent blank at 250 nm disappears on decomposition of excess of reagent by heating. Beer's law is obeyed over the range 0.43–3.2 ppm of tungsten(VI). The molar absorptivity of the complex is 4.5 × 10⁴ l.mole⁻¹ .cm⁻¹ at 250 nm. Tenfold amounts of aluminium, magnesium, calcium, cobalt, iron(II), lead, silver, sodium and titanium do not interfere in the determination of 50 μg of tungsten (VI).     

Spectrophtometric determination of tungsten(VI) with rutin and cetyltrimethylammonium bromide

Tungsten-(VI) reacts with rutin in the presence of cetyltrimethylammonium bromide to form a soluble yellow complex having maximum absorbance at 416 nm. The molar ratio of tungsten to rutin in the complex is 1:2. The molar absorptivity is 5.01 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed over the range 1 x 10(-7)(-1) x 10(-5)M tungsten (VI). Optimum solution conditions for the determination of tungsten in various sample matrices have been found and the interference of diverse ions has been examined.     

Simultaneous determination of molybdenum(VI) and tungsten(VI) and its application in elemental analysis of polyoxometalates

Spectrophotometric determination of molybdenum(VI) and tungsten(VI) with application of Artificial Neural Networks is proposed and it was applied for elemental analysis of solid polyoxometalates. Better results in comparison with previously those achieved by previous published method were demonstrated. MALDI-TOF Mass Spectrometry was tested for possible determination of molecular weight of polyoxometalates utilizing different matrices. Phenomena observed during desorption-ionisation processes are discussed. LDI-TOF MS was found to be suitable for the determination of Mo:W ratio in polyoxometalates as a rapid screening method to follow synthetic procedure.     

Anderson-type heteropolyanions of molybdenum(VI) and tungsten(VI)

The previously reported preparation of some Anderson-type molybdopolyanions containing divalent metal ions (Zn, Cu, Co or Mn) as a heteroatom has been reinvestigated. The molybdopolyanions of Zn(II) and Cu(II) were confirmed, although the Cu(II) polyanion was not stable and could not be recrystallized. On the other hand, the polyanions of Co(II) and Mn(II) could not be reproduced. Another type of heteropoly compound, [X(H₂O)_6-x(Mo₇O₂₄)]⁴⁻ [X = Cu(II), Co(II) or Mn(II)], was isolated as solids, which are not stable thermally. The mixed-type Anderson polyanions, [Ni(II)Mo_6-xW_x,O₂₄H₆]⁴⁻, which have been questioned as mixtures of species with different x values, were also reinvestigated using IR, UV absorption and MCD spectra. They are single species, but not mixtures, although some positional isomers may be present for the compounds where x = 2-4. The possibility of oxidation of the heteroatom with the Anderson structure maintained was examined. The oxidation of [Ni(II)Mo₆O₂₄H₆]⁴⁻ by the S₂O²⁻₈ ion in aqueous solution gave the Waugh-type [Ni(IV)Mo₉O₃₂]⁶⁻ polyanion, whereas the oxidation of [Ni(II)W₆O₂₄H₆]⁴⁻ gave no heteropoly compound.     

Enthalpies of formation of chloride fluorides and of methoxide fluorides of tungsten(VI)

Enthalpies of formation of the tungsten (VI) compounds WF₅Cl, WF₄Cl₂, WF₅(OMe), cis-WF₄(OMe)₂ and cis-WF₂(OMe)₄ are reported. Re-distribution and decomposition reactions in the chloride-fluoride and in the methoxide-fluoride series are discussed in the light of the thermochemical results.     

Reactions of tungsten(VI) and molybdenum(V) chlorides,and tungsten(VI) and molybdenum(VI) oxychlorides,with azoxybenzene

Reactions of W^VI and Mo^V chlorides with azoxybenzene yield ionic species of W^VI and Mo^VI oxychlorides in which the cation is a protonated azobenzene. The reaction between MoCl₅ or MoOCl₄ and azoxybenzene gives, after extraction with methylene chloride—ethanol mixture, the complex [trans-MoOCl₄(OC₂H₅)]^? [C₁₂H₁₀N₂H]⁺. In contrast, WOCl₄ reacts with azoxybenzene to give a stable non-ionic adduct in which the organic moiety is coordinated through its oxygen atom trans to the WO bond. Several complexes of substituted azoxybenzene having similar structures are described.     

Application of a ternary complex of tungsten(VI) with 4-nitrocatechol and thiazolyl blue for extraction-spectrophotometric determination of tungsten

A new ternary ion-association complex of tungsten(VI), 4-nitrocatechol (NC), and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (Thiazolyl Blue, MTT) was obtained and studied using an extraction-spectrophotometric method. The optimum pH, reagent concentrations, and extraction time were determined. The composition of the complex was found to be W(VI): NC: MTT = 1: 2: 2. The extraction process was investigated quantitatively and the key constants were calculated. The molar absorptivity of the chloroform extract at λ_max = 415 nm was 2.8 × 10⁴ dm³ mol⁻¹ cm⁻¹, and the Beer’s law was obeyed up to 8.8 μg cm⁻³ tungsten(IV). The limit of detection and limit of quantification were calculated to be 0.27 μg cm⁻³ and 0.92 μg cm⁻³, respectively. The effect of foreign ions and reagents was studied and a competitive method for determination of tungsten in products from ferrous metallurgy was developed. The residual standard deviation and the relative error were 0.53 % and 0.2 %, respectively.     

A kinetic determination of ultramicro quantities of manganese(II), molybdenum(VI) and tungsten(VI) on the basis of their catalytic action on the oxidation of Azorubin S by hydrogen peroxide

Summary A study has been made of the kinetics of catalytic oxidation of Azorubin S by hydrogen peroxide in the presence of Mn(II), Mo(VI) and W(VI) in order to find optimal conditions for the kinetic catalytic determination of these elements. Manganese(II), molybdenum(VI) and tungsten(VI) were determined in the concentration ranges 5.5–33.0×10^–3, 1.3–8.1 and 5.9–44.1g/ml, respectively. Standard deviations were less than 11%. The effect of some foreign ions on these determinations was also investigated.

---

Zusammenfassung Die Kinetik der katalytischen Oxydation von Azorubin S mit Wasserstoffperoxid in Anwesenheit von Mn(II), Mo(VI) und W(VI) wurde untersucht, um die optimalen Bedingungen für deren kinetisch-katalytische Bestimmung zu finden. Mn(II) wurde im Konzentrationsbereich von 5,5–33,0×10^–3, Mo(VI) von 1,3–8,1 und W(VI) von 5,9–44,1g/ml mit Standardabweichungen <11% bestimmt. Außerdem wurden einige der möglichen Störungen untersucht.

---

---

This work was presented in part at the 20th Annual Meeting of the Serbian Chemical Society, Belgrade, January 17, 1977.     

Method for the determination of chromium (VI) as chromium (VI)-dibenzyidithiocarbamate

Dibenzyldithiocarbamic acid (DBDC) exhibits the ability to speciate between chromium(VI) and chromium(III), since only the chromium(VI) will form complexes with DBDC. The complex is then extracted into an organic solvent and assayed using an ultraviolet-visible (UV-VIS) spectrophotometer at 498.8 nm. Using 250 ml of aqueous sample detection limits less than 1 ng/ml are possible, while the linear range extends to 500 gmg/ml when working at 498.8 nm. Oxidation of the chromium(III) to chromium (VI) using cerium (IV) enables the determination of total chromium and subsequently the chromium (III) in solution. Evaluation of the method with a standard reference material produced only 4.81 part per thousand error in the determination of chromium(VI).     

Extractive spectrophotometric determination of tungsten(VI) in alloy steels using ethopropazine hydrochloride.

Ethopropazine hydrochloride (EPH) has been proposed as a sensitive reagent for the spectrophotometric determination of tungsten(VI). The method is based on the formation of a chloroform-soluble yellow-colored ternary complex by the interaction of EPH and thiocyanate with tungsten(V). The complex exhibits the absorption maximum at 404 nm with Sandell's sensitivity value of 20.03 ng cm-2. The complex obeyed Beer's law in the concentration range of 1-15 micrograms ml-1 with an optimum concentration range of 2.3-12.9 micrograms ml-1. The effects of foreign ions in the determination of tungsten(VI) were investigated. The method has also been successfully applied to the analysis of alloy steels.     

The determination of kinetic data for the reactions of chromium(VI) with glutathione and other thiols

The equations necessary for the determination of the rate constants corresponding to the opposite elementary steps for formation of the oxidant-reductant ester intermediate, as well as that corresponding to its redox decomposition, in the reduction of chromium(VI) by glutathione and other thiols at physiological pH have been deduced. It is shown that those three rate constants can be obtained with a good reproducibility. © 1994 John Wiley & Sons, Inc.     

Mixed micellar medium for the spectrophotometric determination of molybdenum in molybdenum/tungsten mixtures

Effects of cetyltrimethylammonium bromide (CTAB) and/or nonylphenoxypolyethoxyethanol (OP) on the absorption spectra of the complexes of molybdenum and tungsten with bromopyrogallol red (BPR) were studied. Based on these effects, a mixture of CTAB and OP was thus selected as a medium for the selective and sensitive determination of Mo in Mo/W binary mixtures. Under the optimum conditions, Beer's law was obeyed over the range 0.06-0.8 mug ml(-1) Mo with molar absorptivity being 1.3x10(5) l mol(-1) cm(-1) and detection limit 0.025 mug ml(-1). For 1.0 mug Mo, at least 20 mug W did not interfere in the determination of Mo with average recovery and relative standard deviation being 99.5% and <2%, respectively. The method developed maintained the features of simplicity and rapidity and, moreover, its selectivity and sensitivity enhanced greatly due to the use of CTAB/OP mixed micellar medium. When coupled with a compatible concentration method, the proposed method could be used for the determination of trace Mo in natural waters.     

Flavin mononucleotide chemiluminescence in cationic micellar media for determination of chromium(III + VI) by flow injection

The flavin mononucleotide chemiluminescence system, originally developed for the determination of copper(II), is modified with cationic surfactant micelles for the determination of chromium(III + VI). In order for chromium to be detected predominantly, the copper-induced luminescent reaction is significantly suppressed by virtue of the cationic micellar effect. The limit of detection (signal-to-noise ratio = 2) is 5 × 10^?8 M chromium (50-μl sample injection).     

Spectrofluorimetric kinetic determination of selenium (IV) by flow injection analysis in cationic micellar medium

A sensitive catalytic kinetic spectrofluorimetric method for determining ng ml(-1) of selenium by flow injection analysis has been developed. The method, based on the catalytic effect of Se (IV) on the reduction of resorufin by sulphide, in the presence of cetylpyridinium chloride, is monitored spectrofluorimetrically (lambda(ex)=480 nm; lambda(em)=583 nm). The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated. The method is simple, rapid, precise, sensitive, and widely applicable. The limit of detection is 1 ng ml(-1) Se (IV), and the calibration range is 5-1000 ng ml(-1). Sampling rate is 60 samples h(-1), and the relative standard deviation of 12 determinations of 100 ng ml(-1) Se was 0.76%. The determination of Se (IV) in the presence of Se (VI) and total selenium is described. The method was applied to the determination of Se in selenium tablets, and several synthetic samples.