Spectrophotometric determination of lead in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole

A very simple, ultra-sensitive and fairly selective non-extractive spectrophotometric method for the determination of trace amounts of lead with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been developed. DMTD reacts in slightly acidic (0.0015-0.01 M HCl) aquatic media with lead(II) to give a greenish-yellow chelate, which has an absorption maximum at 375 nm. The reaction is instantaneous and absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.93x10(4) lmol(-1)cm(-1) and 15 ngcm(-2) of Pb, respectively. Linear calibration graphs were obtained for 0.1-40 mugml(-1) of Pb; the stoichiometric composition of the chelate is 1:2 (Pb-DMTD). The interference from over 50 cations, anions and complexing agents has been studied at 1 mugml(-1) of Pb. The method developed was used successfully in the determination of lead in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solutions containing both lead(II) and lead(IV) and complex synthetic mixtures. The method has high precision and accuracy (S=+/-0.01 for 0.5 mugml(-1)).     

Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

Spectrophotometric determination of lead in foods with dibromo-p-methyl-bromosulfonazo

The synthesis and purification of a new chromogenic reagent dibromo-p-methyl-bromosulfonazo (DBMBSA) are described. A method is proposed for the spectrophotometric determination of lead with DBMBSA. In 0.24 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMBSA to form a 1:2 blue complex, having a sensitive absorption peak at 638 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 1 mug ml(-1) Pb(II) and the apparent molar absorptivity is 8.44x10(4) l mol(-1)cm(-1). The detection limit and the variation coefficient were found to be 2.45 ng ml(-1) and 1.3%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone (KI-MIBK). The method has been applied to the determination of lead in foods with satisfactory results.     

对氨基苯亚甲基硫代若丹宁固相萃取分离光度法测定环境水和食品样品中的铅

合成了新试剂对氨基苯亚甲基硫代若丹宁(ABTR),并用红外光谱、核磁共振氢谱和元素分析鉴定其结构。研究了ABTR与铅的显色反应,在pH3.8的HAc NaAc缓冲介质中,吐温80存在下,ABTR与铅反应生成2∶1稳定络合物,该络合物可被WatersSep PakC18小柱固相萃取,小柱上富集的络合物用乙醇洗脱后富集倍数可达50倍,在乙醇介质中,λmax=545nm,体系摩尔吸光系数ε=1.09×105L·mol-1·cm-1。铅量在0.05～4.0μg/mL内符合比尔定律,本法可用于环境水和食品样品中铅的测定。     

Spectrophotometric flow injection methods for zinc determination in pharmaceutical and biological samples.

Zinc ions form a yellow complex with di-2-pyridyl ketone salicyloylhydrazone (DPKSH). This complex showed maximum absorption at 376 nm, and it was used to develop spectrophotometric flow injection methods for Zn(II) determination in different samples. Two types of flow systems were proposed. In the first system, a linear analytical curve was obtained in a concentration range from 0.217 to 4.60 mg L(-1) Zn(II), with a detection limit of 48.8 microg L(-1). In the second system, a minicolumn packed with an anion exchanger resin was used to concentrate Zn(II) as a chlorocomplex, and a linear analytical curve within a concentration range from 0.0824 to 2.06 mg L(-1) Zn(II) was obtained, having a detection limit of 13.9 microg L(-1). The developed methods were applied to biological and pharmaceutical samples, and a great compliance was observed by comparing the results with ones obtained by an atomic absorption technique.     

Spectrophotometric determination of isoproturon using p-aminoacetophenone and its application in environmental and biological samples

A simple and sensitive method for the determination of isoproturon, a widely used herbicide is described here which is based on alkaline hydrolysis of isoproturon to its corresponding primary amine followed by diazotization and coupling with p-aminoacetophenone in alkaline medium. The absorption maxima of the coloured compound formed is measured at 525 nm. Beer's law is obeyed over the concentration range of 0.5-5.0 mug in a final solution volume of 25 ml (0.02-0.2 ppm). The molar absorptivity and Sandell's sensitivity were found to be 8.6x10(5) l mol(-1) cm(-1) and 0.0002 mug cm(-2), respectively. The method has been satisfactorily applied to the determination of isoproturon in environmental and biological samples.     

Spectrophotometric determination of trace copper in water samples with thiomichlersketone

A simple and sensitive spectrophotometric method for determination of trace copper in water samples is proposed. In the presence of pH 4.6 HAc-NaAc buffer solution and surfactant polyethylene octyl phenyl ether (OP) medium, copper reacts with thiomichlersketone (TMK) to form a stable 1:4 complex. The complex Cu(II)-TMK-OP shows maximum absorbance at 500 nm with a molar absorptivity value of 5.7x10(4) l mol-1 cm-1. Beer's law is obeyed for copper concentrations in the range of 0-15 microg/25 ml. The average recovery of copper is between 95.8 and 106%. The method has been applied for determination of trace copper in different water samples with satisfactory results.     

Spectrophotometric determination of proteins in biological fluids

A comparative analysis of procedures of the spectrophotometric determination of total protein with various organic dyes, Bromocresol Green, Bromophenol Blue, and Pyrogallol Red, in biological fluids is presented. It is shown that the results of determination with various dyes can differ because of the specific features of reagent interaction with the components of biological fluids. A new organic reagent, Bromopyrogallol Red, possessing equal sensitivity to different protein fractions (albumins and globulins) and ensuring a minimum error of the determination of total protein in clinical examinations using calibration solutions of various compositions is proposed. A procedure for the determination of total protein in biological fluids is developed and tested on real samples of urine and blood serum.     

Gallium determination in biological samples

A sensitive, simple and time-saving method has been developed for the neutron activation analysis of gallium at concentrations around 10⁻⁴ ppm in biological tissues. After a 24-hour irradiation in a thermal neutron flux of 2.8·10¹³ n·cm⁻²·s⁻¹ and a purification by ion-exchange chromatography to eliminate troublesome elements such as sodium, iron and copper, the⁷²Ga activity is measured with enough accuracy for the method to be applicable in animal physiology and clinical toxicology.     

Spectrophotometric determination of vanadium in biological materials with N-benzylbenzohydroxamic acid

A spectrophotometric method for the determination of vanadium in biological materials with N-benzylbenzohydroxamic acid is proposed. The method is highly selective for vanadium and is free from rigid control of reaction conditions. No separation of iron prior to the determination of vanadium is necessary. Cu(II), Co(II), Ni, Mn(II), Cr(III), Ce(IV), Zr, Mo(VI), Ca, Sr, Ba, UO(2)(II) and many others metal ions do not interfere. Fairly large quantities of Ti(IV) and W(VI) are tolerated.     

Spectrophotometric determination of lead with Pyrocatechol Violet and cationic surfactants

The optimum conditions for the formation of ternary lead complexes with Pyrocatechol Violet and cationic surfactants have been evaluated. The examined ternary systems form a basis for simple and sensitive spectrophotometric methods for lead (ε = 4.20−5.06 × 10⁴ liters · mol⁻¹ · cm⁻¹). Using the most sensitive method, lead content in zinc powder has been determined. Lead does not form ternary complexes with the other triphenylmethane reagents, Chrome Azurol S and Eriochrome Cyanine R, in the presence of cationic surfactants because of its too “soft” properties.     

Single drop microextraction combined with graphite furnace atomic absorption spectrometry for determination of lead in biological samples

Single drop microextraction combined with graphite furnace atomic absorption spectrometry is introduced for the determination of trace lead in water samples. A drop of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) dissolved in benzene was held at the tip of a microsyringe and immerged into the sample solution which was stirred, the solvent drop interacts with the sample solution, and the analyte was extracted into the drop and concentrated. After extracting for a period of time, the drop was retracted into the microsyringe and directly injected into graphite furnace for GFAAS determination of Pb. Several factors affecting the extraction efficiency, such as pH of sample solution, drop volume, stirring rate and extraction time, were optimized. Under the optimized conditions, an enhancement factor of 16 was achieved, and the detection limits for Pb were 25 ng L⁻¹. The relative standard deviation for seven replicate determination of 10 ng mL⁻¹ Pb was 6.1%. The method was applied to determine trace Pb in biological samples with satisfactory results. Correspondence: Pei Liang, Key Laboratory of Pesticide & Chemical Biology of Ministry of Education, College of Chemistry, Central China Normal University, Wuhan 430079, P.R. China     

Spectrophotometric determination of trace copper(II) in biological samples with 2,4-bis(4-phenylazophenylaminodiazo)phenol

A highly sensitive and selective chromogenic reagent 2,4-bis(4-phenylazophenylaminodiazo)phenol (BPPAAP) reacted with copper(II) to form a highly stable complex in the ethanolic solution at pH range of 9.0–12.0. The Cu(II)-BPPAAP complex showed maximum absorbance at 540 nm, with molar absorptivity being 1.86 × 10⁵ L/mol cm. Beer’s law was obeyed over the range 0–0.2 μg/100 mL of copper(II) and variation coefficient is found to be 2.4–4.8%. The detection and quantification limit of the method are 2.0 and 6.5 ng/mL, respectively. To eliminate the interference of foreign ions, a convenient and efficient method using a column packed with sulfhydryl dextrose gel as a solid-phase extractant was utilized with satifactory reults. The developed method has been successfully employed for the determination of copper(II) in the biological samples.     

Spectrophotometric flow-injection determination of nickel in biological materials

A flow injection method has been developed for the direct determination of free available Pb(II) and total Pb content in wine samples. The method is based on the chemical sorption of Pb(II), from pH 7 buffered solutions, on a packed polyurethane foam column, modified by addition of 2-(2-benzothiazolylazo)-p-cresol (BTAC). After this step, lead was directly eluted with a stream of 0.1 mol l(-1) HCl into an air C(2)H(2) flame in which lead was determined by atomic absorption spectrometry. Total lead was analyzed after sample digestion with nitric acid and hydrogen peroxide, being free available lead determined by direct sample on-line preconcentration and elution. The method provides a limit of detection (3sigma) of 1 mug l(-1) lead and relative standard deviation, which varies from 6 to 0.7% for lead concentration of 10 and 500 mug l(-1). Total content of lead in wine samples analyzed varied from 8 to 42 mug l(-1) being obtained free available values of Pb(II) under the limit of detection of the method. Recovery studies on natural wine samples, spicked with inorganic lead, evidenced the remaining capability of ligands, present in the wine, to avoid lead retention on the polyurethane foam loaded with BTAC.     

Differential pulse polarographic determination of lead in standard alloys and biological samples after separation and preconcentration with PAN

A highly selective, sensitive, rapid and economical differential pulse polarographic method has been developed for the determination of trace amount of lead in various samples after adsorption of its 1-(2-pyridylazo)-2-naphthol (PAN) on naphthalene in the pH range of 8.4 - 11.5. After filtration, the solid mass is shaken with 9.0 ml of 1 M hydrochloric acid and lead is determined by differential pulse polarography (DPP). Lead can alternatively be quantitatively adsorbed on [1-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent packed in a column and determined similarly. The detection limit is 0.1 microg/ml (signal to noise ratio = 2) and the linearity is maintained in the concentration range 0.3 - 300 microg/ml with a correlation coefficient of 0.9996 and relative standard deviation of +/- 1.1%. Characterization of the electroactive process included an examination of the degree of reversibility. Various parameters such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of lead has been studied in detail to optimize the conditions for determination in alloys and biological samples.     

Spectrophotometric analysis of trichloroethylene in various environmental and biological samples

A simple sensitive extractive spectrophotometric method for determination of trichloroethylene is proposed. Trichloroethylene is treated with pyridine to form glutaconic aldehyde by heterolytic cleavage of the pyridine ring. Glutaconic aldehyde is further coupled with 4-aminoacetanilide to form an orange–red dye which is extractable in 3-methyl-1-butanol. The extracted dye shows absorption maximum at 520 nm. The system obeys Beer’s law in the range of 0.05–0.8 μg mL^?1. Important analytical parameters such as time, temperature, reagent concentration, acidity etc. have been optimized for complete colour reaction. Sandell’s sensitivity and molar absorptivity for the system were found to be 0.001 μg cm^?2 and 1.2 × 10⁵ L mol^?1 cm^?1, respectively. The proposed method is satisfactorily applied to micro-level determination of trichloroethylene in various environmental and biological samples.     

Kinetic-coulometric determination of mercury in biological samples

A simple approximate calculation method is given which permits determina-tion of the maximal scan rates of potential allowable for distortion-free recording of current-voltage curves with X-Y recorders. For the calculations only the response time of the recorder, the wave shape and the scan rate of potential need be known. Stationary mercury electrodes and rapid polarography with a dropping mercury electrode at controlled drop times were examined. Electroanalytical implications are discussed, with particular emphasis on the rapid a.c. polarographic method with short controlled drop times and on stationary-electrode fundamental and second harmonic a.c. voltammetry. Theoretically and experimentally it has been shown that an X-Y recorder with 0.5–1.0-s response time can be used for scan rates up to about (50/nt') mV s^-1 with a.c. techniques and about (100/nt') mV s^-1 with d.c. polarography (t'= response time of recorder, n = number of electrons).     

Enzymatic determination of citrulline in biological samples

Conclusions The newly developed method for the enzymatic determination of citrulline in biological specimens gives satisfying and reproducible results and is apt for measuring citrulline concentrations in the physiological as well as in the pathological range, for disease screening and probably can be utilized for automatic analysis.Since citrulline hydrolase is a fairly stable enzyme with no requirements for cofactors and not interfered by basic amino acids and urea, this method offers a true alternative to the citrulline-determinations employed previously.

---

Enzymatische Bestimmung von Citrullin in biologischen Proben

     

The determination of tin in biological samples

A rapid method is described for the determination of tin in biological material, using¹²³Sn (T=40 m). The chemical procedure is based on the nearly quantitative extraction of tetravalent tin into toluene from an acid 1.3M iodide solution. The recovery is determined by spiking the solution with¹¹³Sn and measuring the activity of the^113mIn daughter in the counting sample. The lower limit of the determination is ?0.01μg. Results are given for standard kale powder and dried animal blood.