Modeling of cumulative release on long term leaching behaviour of selected oil sludge from crude oil terminal and petroleum refining plant

Management of oil sludge containing environmentally toxic elements is a major problem in crude oil processing industry. Oil sludge samples from the petroleum refinery plant in Melaka and crude oil terminal in Sarawak were analysed. The aim of present work is to study long term leaching behaviour of arsenic (As), cobalt (Co), chromium (Cr) and zinc (Zn) from oil sludge. Tank leaching test was carried out and the samples were analysed using inductively coupled plasma-mass spectrometry (ICP-MS). The results were studied using LeachXS software to plot the graphs of elements concentration in order to study the leaching behaviour of toxic elements in oil sludge. The long term leaching (100 years) modeling was calculated using equations referred to National Institute of Public Health and the Environment Bilthoven (RIVM) and the results were plotted for cumulative release in different areas of oil sludge. Tank leaching test of the oil sludge samples from petroleum refinery plant in Melaka showed concentrations of As, Co, Cr and Zn ranging from 0.205 to 1.102, 0.031–0.454, 0.016–0.086 and 0.409–8.238 mg/l, respectively while the concentrations of As, Co, Cr and Zn in oil sludge samples from crude oil terminal in Sarawak were in the range of 0.002–0.089, 0.001–0.033, 0.006–0.016 and 0.100–2.744 mg/l, respectively. On the other hand, results on cumulative release from the modeling of long term leaching (100 years) showed that As, Co, Cr and Zn concentrations were proportional to the quantity of oil sludge. In conclusion, during extrapolation of release of toxic elements using the data in the laboratory, several other factors were taken into account to suit environmental conditions such as soil moisture, the negative logarithm of the effective diffusion coefficient (pD_e) and temperature, while the long-term behaviour of As, Co, Cr and Zn was proportional to the quantity of oil sludge to be disposed off.     

A potentiometric rhodamine-B based membrane sensor for the selective determination of chromium ions in wastewater.

The construction and performance characteristics of a novel chromate ion-selective membrane sensor are described and used for determining chromium(III) and chromium(VI) ions. The sensor is based on the use of a rhodamine-B chromate ion-associate complex as an electroactive material in a poly(vinyl chloride) membrane plasticized with o-nitrophenyloctyl ether as a solvent mediator. In a phosphate buffer solution of pH 6 - 7, the sensor displays a stable, reproducible and linear potential response over the concentration range of 1 x 10(-1) - 5 x 10(-6) mol l(-1) with an anionic Nernstian slope of 30.8 +/- 0.5 mV decade(-1) and a detection limit of 1 x 10(-6) mol l(-1) Cr(VI). High selectivity for Cr(VI) is offered over many common anions (e.g., I-, Br-, Cl-, IO4-, CN-, acetate, oxalate, citrate, sulfate, phosphate, thiosulfate, selenite, nitrate) and cations (e.g., Ag+, Ca2+, Sr2+, Co2+, Ni2+, Cu2+, Mn2+, Fe2+, Zn2+, Cd2+, Al3+, Cr3+). The sensor is used for determining Cr(VI) and/or Cr(III) ions in separate or mixed solutions after the oxidation of Cr(III) into Cr(VI) with H2O2. As low as 0.2 microg ml(-1) of chromium is determined with a precision of +/-1.2%. The chromium contents of some wastewater samples were accurately assessed, and the results agreed fairly well with data obtained by atomic absorption spectrometry.     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

Preconcentration and speciation of chromium in waters using solid-phase extraction and atomic absorption spectrometry

A method for the preconcentration and speciation of chromium was developed. After formation of an anionic compound with ethylenediaminetetraacetic acid (CrY(-)), Cr (VI) and Cr (III) are retained on a strong anionic phase (SAX) and controlled elution with 0.5 M NaCl permits their speciation. The retention and elution conditions were optimised, and interferences due to the presence of other ions such as Mg(II), Mn(II), Sn(II), Fe(III), Ba(II), Al(III), Ca(II), chloride, iodine, bromide, fluoride, sulphate, phosphate, bicarbonate and nitrate were studied. The detection limits were 0.4 mug l(-1) and 1.1 mug l(-1) for Cr(III) and Cr(VI), respectively, and reproducibility was 9%. The results obtained for speciation of chromium by the proposed method in wastewaters are in agreement with the values obtained by a reference method for a 95% confidence level.     

Silica gel modified with N-(3-propyl)-O-phenylenediamine: functionalization, metal sorption equilibrium studies and application to metal enrichment prior to determination by flame atomic absorption spectrometry.

The use of the chemically modified silica gel N-(3-propyl)-O-phenylenediamine (SiG-NPPDA) adsorbent, for the preconcentration and separation of trace heavy metals, was described. SiG-NPPDA sorbs quantitatively (90-100% recovery) trace amounts of nine heavy metals, viz., Cd(II), Zn(II), Fe(III), Cu(II), Pb(II), Mn(II), Cr(III), Co(II) and Ni(II) at pH 7-8. The sorption capacity varies from 350 to 450 micromol g(-1). Desorption was found to be quantitative with 1-2 M HNO3 or 0.05 M Na2EDTA. The distribution coefficient, Kd and the percentage concentration of the investigated metal ions on the adsorbent at equilibrium, C(M,eqm)% (Recovery, R%), were studied as a function of experimental parameters. The logarithmic values of the distribution coefficient, log Kd, ranges between 4.0 and 6.4. Some foreign ions caused little interference in the preconcentration and determination of the investigated nine metals by flame atomic absorption spectrometry (AAS). The adsorbent and its formed metal chelates were characterized by IR (absorbance and/or reflectance), potentiometric titrations and thermogravimetric analysis (TGA and DTG). The mode of chelation between the SiG-NPPDA adsorbent and the investigated metal ions is proposed to be due to the reaction of the investigated metal ions with the two nitrogen atoms of the SiG-NPPDA adsorbent. The present adsorbent coupled with flame AAS has been used to enrich and determine the nine metal ions in natural aqueous systems and in certified reference materials (RSD < or = 5%). The copper, iron, manganese and zinc present in some pharmaceutical vitamin samples were also preconcentrated on SiG-NPPDA adsorbent and determined by flame AAS (RSD < or = 4.2%). Nanogram concentrations (0.07-0.14 ng ml(-1)) of Cd(II), Zn(II), Fe(III), Pb(II), Cr(III), Mn(II), Cu(II), Co(II) and Ni(II) can be determined reliably with a preconcentration factor of 100.     

Sequential injection analysis for Cr(VI) and Cr(III) with renewable surface reflection spectrophotometry.

On the basis of the chromogenic reaction of chromium(VI) with 1,5-diphenylcarbohydrazide (DPC) on the surface of Polysorb C-18 beads and the sequential injection renewable surface technique (SI-RST), a highly sensitive reflect spectrophotometric method for the determination of chromium(III) and chromium(VI) was proposed. Considerations of system and flow cell design, and factors that influence the determination performance were discussed. With 300 microl of sample loaded and 0.6 mg of beads trapped, the linear response range was 0.02 - 0.5 mg l(-1) Cr(VI) with a detection limit (3 sigma) of 2.4 microg l(-1) Cr(VI). The method achieves a precision of 1.3% RSD (n = 11) and a throughput of 53 samples per hour. The determination of Cr(III) was based on the same reaction for the determination of Cr(VI) after being oxidized by (NH4)2S2O8. The precision of the oxidation method was evaluated using a 0.2 mg l(-1) Cr(III) standard, yielding an RSD of 2.5% (n = 11). The average recovery of Cr(III) oxidized was tested to be 99.1%. The proposed method was used in the simultaneous determination of Cr(VI) and Cr(III) in water samples, and the error was less than 3%.     

1,8-Dihydroxyanthraquinone anchored on silica gel: synthesis and application as solid phase extractant for lead(II), zinc(II) and cadmium(II) prior to their determination by flame atomic absorption spectrometry

A new chelating matrix has been prepared by immobilizing 1,8-dihydroxyanthraquinone (DHAQ) on silica gel modified with (3-aminopropyl)triethoxysilane. After characterizing the matrix with thermogravimetric analysis (TGA), cross polarization magic angle spinning (CPMAS) NMR and diffuse reflectance infrared fourier transformation (DRIFT) spectroscopy, it has been used to preconcentrate Pb(II), Cd(II) and Zn(II) prior to their determination by flame atomic absorption spectrometry. The optimum pH ranges for quantitative sorption are 6.0-7.5, 7.0-8.0 and 6.0-8.0 for Pb, Zn, and Cd, respectively. All the metal ions can be desorbed with 2 mol l(-1) HCl/HNO(3). The sorption capacity of the matrix has been found to be 76.0, 180.0 and 70.2 mumol g(-1) for Pb, Zn and Cd, respectively, with the preconcentration factor of approximately 200. The limits upto which electrolytes NaNO(3), NaCl, NaBr, Na(2)SO(4), Na(3)PO(4) sodium citrate, EDTA, glycine and humic acid and cations Ca(II), Mg(II), Cu(II), Co(II), Ni(II), Mn(II) Al(III), Cr(III) and Fe(III) can co-exist with the metal ions during their sorption without any adverse effect are reported. The lowest concentration of metal ions for quantitative recovery is 5.0 ng ml(-1) The simultaneous enrichment and determination of all the metals is possible if total load of metal ions is less than sorption capacity. The flame AAS was used to determine these metal ions in underground, tap and river water samples (relative standard deviation (R.S.D.)相似文献   

Second chemiluminescence behavior of Fe2+, Fe3+ and Cr3+ in the luminal-KMnO4 system.

A novel flow injection chemiluminescence (CL) method has been developed for the determination of three metal ions, namely Fe2+, Fe3+ and Cr3+, based on the second CL (SCL) signal of the mixture of luminal with KMnO4 in a sodium hydroxide medium by the catalysis of Fe2+, Fe3+ or Cr3+. The possible CL mechanism of the systems, the influencing factors, and the optimum conditions for the reactions were investigated based upon the kinetic curve of the CL reaction, CL spectra, UV-visible spectra and some other experiments. Under the optimum conditions, the SCL intensity was directly proportional to the concentration of these metal ions in solution in the range of 0.10 - 100.00 mg l(-1) for Fe(2+), 0.50 - 7.50 and 7.50 - 200.00 mg l(-1) for Fe3+, 0.01 - 0.25 and 0.25 - 10.00 mg l(-1) for Cr3+. The detection limits (3 sigma/s) were 9.87 x 10(-6) g l(-1), 2.71 x 10(-6) g l(-1) and 5.25 x 10(-7) g l(-1) for Fe2+, Fe3+ and Cr3+, respectively.     

Separation and speciation of Cr(III) and Cr(VI) with Saccharomyces cerevisiae immobilized on sepiolite and determination of both species in water by FAAS

A rapid, sensitive and accurate method for the separation, preconcentration and determination of Cr(III) and Cr(VI) in water samples is described. Chromium species can be separated by biosorption on Saccharomyces cerevisiae immobilized on sepiolite and determined by flame atomic absorption spectrometry (FAAS). The optimum conditions for separation and preconcentration (pH, bed height, flow rate and volume of sample solution) were evaluated. Recovery of the chromium was 96.3+/-0.2% at 95% confidence level. The breakthrough capacity of the adsorbent was found as 228 mumol g(-1) for Cr(III). The proposed method was applied successfully to the determination of Cr(III) and Cr(VI) in spiked and river water samples.     

A multicommuted flow system for the determination of copper, chromium, iron and lead in lubricating oils with detection by flame AAS

In this work, a flow analysis procedure for the determination of copper, chromium, iron and lead in lubricating oils using flame AAS as detection technique is described. The flow manifold was designed to implement the multicommutation approach and it comprised three 3-way solenoid valves controlled by a personal computer. The flow system presented allowed to process the oil samples to determine wear metals without any prior preparation. Aiming to assess accuracy the results were compared with those obtained by manual procedure using flame AAS. Applying the joint-confidence ellipse test, no significant difference at the 95% confidence level was observed. Other profitable features such as a sample throughput of 50 determinations per hour; relative standard deviations (n = 5) below 2% for Cu, and below 8% for Cr, Fe and Pb; and linear responses in the range 0–40 ppm (w/w) (Cu, Fe) and 0–15 ppm (w/w) (Cr, Pb) were also achieved.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

Determination of trace metals and speciation of chromium ions in atmospheric precipitation by ICP-AES and GFAAS

Sampling and analytical techniques used for determining trace metal concentrations in atmospheric precipitation waters collected in Hungary are presented. The results of the analyses are briefly discussed and special attention is devoted to chromium speciation. For the preconcentration of the trace metals a chelating cellulose, iminodiacetic acid ethylcellulose (IDAEC) microcolumn was used in a flow-injected system. Cd, Co, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn were determined by ICP-AES. In precipitation water the concentrations of the trace elements were in the 0.1-50 mug/l. range. The two forms of chromium, Cr(III) and Cr(VI) were separated using IDAEC and the anion exchanger diethylamine ethylcellulose, respectively. Cr was determined by GFAAS. In atmospheric precipitation the concentration of Cr(III) was in the range of 0.1-0.4 mug/l. while that of Cr(VI) in the range of 0.04-0.1 mug/l.     

Flame AAS determination of dopants and trace metal impurities in single crystals of potassium titanylphosphate

A flame AAS method is used for the determination of dopants and impurities in potassium titanylphosphate (KTP) single crystals. Sample digestion using sulphuric acid and hydrofluoric acid is proposed as being the most appropriate procedure. The effect of major and minor components in the sample solution on the analytical signal is studied. The content of the dopants Cr, Mn and Ni (at a level of about 1 mg g(-1)) as well as the content of the impurities Fe, Na, Mg, W and Al (from 4 mug g(-1), depending on the trace metal) in the KTP single crystals is determined. The precision of the method is characterized by a relative standard deviation of 3-10%. The accuracy is checked by comparison with ICP-AES data for the trace element content in the KTP single crystals.     

Characterization of Indian cigarette tobacco and its smoke aerosol by nuclear and allied techniques

Forty brands of tobacco used in Indian cigarettes, 20 brands of bidis (tobacco rolled in wrapper leaves), 15 brands of chewing tobacco and 15 brands of snuff tobacco were analyzed by nuclear and allied techniques. The elements measured into tobacco can be grouped into seven categories from less than 1 ppm to 5% by weight. Concentration level varied from 0.5-5% for (Ca, K, Cl), 400-1500 ppm (Fe), 200-600 ppm (Na), 100-300 ppm (Ti, Mn, Br and Sr), 10-100 ppm (Cu, Zn and Rb), 1-10 ppm (Cr, Ni, Pb and La) and less than 1 ppm (As, Co, Cd, Sb, Hg and Eu). Among the above elements Cr, Ni, As, Cd, Pb, Hg and Sb are considered toxic. The percentage transfer of the elements from cigarette tobacco to smoke particles during smoking was also estimated using a smoking machine and collecting the smoke particles on a filter paper. The results show that Br, Cr, Sb and Zn have high percentage transfer from tobacco to its smoke of the order of 2-15%. Out of these Sb has the highest 15%. Cobalt, Fe and Sc have lowest percentage of transfer of the order of less than 1%. The percent transfer of these elements from tobacco to tobacco smoke is higher in case of bidis (1.5-3.0 times) as compared to cigarettes. In cigarettes also non-filter cigarettes have higher transfer (2-3 times) as compared to filter tip cigarettes.     

全反式维甲酸治疗动脉粥样硬化兔肝脏微量元素含量的变化

目的探讨实验性动脉粥样硬化兔肝脏组织中zn、Fe、Cu、Mn和cr、Pb、cd含量的变化。方法用高脂饮食复制兔动脉粥样硬化模型,然后给予全反式维甲酸建立治疗组模型,获取肝脏,用硝酸、过氧化氢混合液微波消解样品,采用原子吸收光谱法测定肝脏组织中zn、Fe、Cu、Mn和Cr、Pb、cd的含量。结果高脂组肝脏组织zn、Fe、Cu、Mn和cr、Pb、cd含量分别为86．09、277．1、11．07、5．366mg／kg和115．2、286．0、210．5μg／／kg,治疗组肝脏组织zn、Fe、Cu、Mn和cr、Pb、cd含量分别为135．3、347．7、10．72、7．218mg／kg和137．3、209．4、250．2μg／kg。结论经过维甲酸治疗后,zn、Fe、Mn、Cr含量明显提高,基本达到正常组水平。     

Zinc and iron determination in serum and urine samples of thyroid patients using cloud point extraction

A simple and rapid cloud point extraction method was applied for preconcentration of trace quantities of zinc (Zn) and iron (Fe) in biological samples (serum and urine) of thyroid patients prior to determination by flame atomic absorption spectrometry. The metals in serum and urine samples were complexed with 1-(2-thiazolylazo)-2-naphthol and entrapped in the surfactant octylphenoxypolyethoxyethanol (Triton X-114). After centrifugation, the surfactant-rich phase was diluted with 0.1 M HNO3 in methanol. For optimum recovery of analytes, the influences of the analytical parameters, including pH and amounts of complexing and surfactant reagents, were investigated. Enrichment factors of 66.4 and 70.2 were obtained for the preconcentration of Zn(II) and Fe(III), respectively. The obtained results showed sufficient recoveries (>98%) for Zn(II) and Fe(III) in certified reference materials (CRMs). The proposed method was applied to the determination of Zn(II) and Fe(III) in biological (serum and urine) samples and CRMs.     

Speciation of V, Cr and Fe by capillary electrophoresis-bandpass reaction cell inductively coupled plasma mass spectrometry

Capillary electrophoresis-dynamic reaction cell inductively coupled plasma mass spectrometry (CE-DRC-ICP-MS) for the speciation of iron(III/II), vanadium(V/IV) and chromium(VI/III) is described. Two different CE migration modes were employed for separating the six metal ions using pre-capillary complexation. One is counter-electroosmotic mode in which iron(III/II) and vanadium(V/IV) ions were well separated using a 60 cm x 75 microm i.d. fused silica capillary. The voltage was set at +22 kV and a 15 mmol l(-1) tris(hydroxymethyl)aminomethane (Tris) buffer (pH 8.75) containing 0.5 mmol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.5 mmol l(-1) ortho-phenanthroline (phen) was used as the electrophoretic buffer. The other is co-electroosmotic mode in which chromium(VI/III) ions were well separated while the applied voltage was set at -22 kV and a 10 mmol l(-1) ammonium citrate buffer (pH 7.7) containing 0.5 mmol l(-1) diethylenetriaminepentaacetic acid (DTPA) and 0.01% polybrene was used as the electrophoretic buffer. The mass spectra were measured at m/z 51, 52 and 56 for V. Cr and Fe, respectively. The interfering polyatomic ions of 35Cl16O+, 40Ar12C+ and 40Ar16O+ on 51V+, 52Cr+ and 56Fe+ determination were reduced in intensity significantly by using NH3 as the reaction cell gas in the DRC. The detection limits were in the range of 0.1-0.5, 0.4-1.3 and 1.2-1.7 ng ml(-1) for V, Cr and Fe, respectively. Applications of the method for the speciation of V, Cr and Fe in wastewater were demonstrated. The recoveries were in the range of 92-120% for various species.     

Speciation studies by capillary electrophoresis- Simultaneous determination of chromium(III) and chromium(VI)

A method for the simultaneous determination of chromium(III) and chromium(VI) by capillary electrophoresis (CE) has been developed. The chromium(III) has been chelated with 1,2-cyclohexanediaminetetraacetic acid (CDTA) in order to impart a negative charge and similar mobility to both the chromium(III) and the chromium(VI) species. The effects of the amount of the reagent, pH and heating time required to complete the complexation have been studied. Factors affecting the CE behaviour such as the polarity of electrodes and the pH of electrophoretic buffer have been investigated. The separated species have been monitored by direct UV measurements at 214 nm. The detection limits achieved are 10 g/l for Cr(VI) and 5 g/l for Cr(III) and linear detector response is observed up to 100 mg/l. The procedure has been applied to the determination of both chromium species in industrial electroplating samples and its accuracy was checked by comparing the results (as total chromium) with those of atomic absorption spectrometry. No interference occurred from transition metal impurities under optimized separation conditions. The method is also shown to be feasible for determining Cr(III) as well as other metal ions capable to form complexes with CDTA (like iron(III), copper(II), zinc(II) and manganese(II)) in pharmaceutical preparations of essential trace elements.     

Removal of metal ions from aqueous solution by adsorption on the natural adsorbent CACMM2.

The adsorption of Cd2+, Cr3+, Cu2+, Fe3+, Ni2+, Pb2+ and Zn2+ from aqueous solution was used to study the sorption properties of the adsorbent CACMM2 extracted from a cactus. Quantitation of the cation concentrations was performed by HPLC with diode array detection using on-column complex formation with 8-hydroxyquinoline. Removal degree from 100 mg M(n+) l(-1) solutions followed the series: Cu>Cd>Fe>Ni>Cr>Zn. Henry and Freundlich constants were determined since adsorption did not reach saturation plateaux in the studied concentration interval. Sorption of chromium by CACMM2 was stronger than the sorption onto lignin, calcium oxalate and cellulose up to 1,000 mg Cr3+ l(-1). Copper and iron were desorbed to a greater extent, while lead adsorption was practically irreversible. CACMM2 was able to remove more than 83% of chromate in a freshly prepared and exhausted chromate commercial solution.     

Elemental composition of drinking water supplies in three states in Southeastern Nigeria

The levels of some trace elements; Co, Mn, Cu, Zn, Cr, Cd, Pb, Fe, Hg, Se, As, Ni and minor elements; Na, K, Ca and Mg were determined in public drinking water supplies (public taps and groundwaters) in three states in Southeastern Nigeria using energy dispersive X-ray fluorescence spectrometry (EDXRF) and flame atomic absorption spectrometry (FAAS). The mean levels of most of the trace elements in the groundwater samples were below the World Health Organization (WHO) drinking water quality limits, the only exception being Hg whose mean value of 3.69 μg/l exceeded the WHO limit of 1.0 μg/l. Violations of the WHO limits were also observed for Fe, Zn, Se and Pb in some of the groundwater samples. In the public tap samples only Hg violated the WHO limit.